Download or read book A Working Party Report on CO2 Corrosion Control in Oil and Gas Production written by Liane M. Smith and published by Woodhead Publishing Limited. This book was released on 1997 with total page 72 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book A Working Party Report on Corrosion Resistant Alloys for Oil and Gas Production written by Liane Smith and published by CRC Press. This book was released on 2022-04-21 with total page 97 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses the selection and qualification of corrosion resistant alloys for use in oil and gas field production facilities that handle raw and partly processed reservoir fluids at, and below, reservoir temperatures.

Download or read book Corrosion Under Insulation CUI Guidelines written by Gino De Landtsheer and published by Woodhead Publishing. This book was released on 2020-08-22 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion Under Insulation (CUI) Guidelines: Technical Guide for Managing CUI, Third Edition, Volume 55 builds upon the success of the first two editions to provide a fully up-to-date, practical source of information on how to monitor and manage insulated systems. In the first edition of this book published in 2008, the EFC Working Parties WP13 and WP15 engaged together to provide guidelines on managing CUI with contributions from a number of European refining, petrochemical, and offshore companies. The guidelines were intended for use on all plants and installations that contain insulated vessels, piping, and equipment, and cover a risk-based inspection methodology for CUI, inspection techniques, and recommended best practices for mitigating CUI. The guidelines include design of plant and equipment, coatings and the use of thermal spray techniques, types of insulation, cladding/jacketing materials, and protection guards. Corrosion-under-insulation (CUI) refers to the external corrosion of piping and vessels that occurs underneath externally clad/jacketed insulation as a result of the penetration of water. By its very nature CUI tends to remain undetected until the insulation and cladding/jacketing is removed to allow inspection, or when leaks occur. CUI is a common problem shared by the refining, petrochemical, power, industrial, onshore and offshore industries. - Provides revised and updated technical guidance on managing CUI provided by EFC Working Parties 13 and 15 - Discusses the standard approach to risk based inspection methodology - Presents the argument that CUI is everywhere, and looks at mitigating actions that can be started from the onset - Includes a wide array of concepts of corrosion mitigation

Download or read book Testing Tribocorrosion of Passivating Materials Supporting Research and Industrial Innovation written by Jean-Pierre Celis and published by Routledge. This book was released on 2017-07-05 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: This first edition of Testing Tribocorrosion of Passivating Materials Supporting Research and Industrial Innovation: A Handbook treats in a clear, concise, and practical manner an important material degradation and protection matter. It is designed as a handbook and provides a well structured approach of the basics needed to investigate the tribocorrosion behavior of passivating materials, and to conduct in a correct way a laboratory investigation on it. It provides answers on practical and theoretical approaches of tribocorrosion phenomena to engineers and medical persons involved with material assemblies subjected to aggressive environmental and mechanical conditions. For academic researchers it is a pertinent tool assisting them in how they can perform a tribocorrosion investigation and obtain results that are correctly interpreted and can be exchanged. Different parts of the book are illustrated with practical examples. This handbook is truly an indispensable guide for every professional who comes into contact with the complex material degradation and protection processes that take place under combined corrosion and wear conditions. Fields of interest include: transportation (aeronautics, maritime, rail, automotive), medical implants (orthopaedics, dentistry), biochemistry, food production, energy production, and machining. The coordination of this handbook writing was done by Professor Jean-Pierre Celis (Katholieke Universiteit Leuven, Belgium) and Professor Pierre Ponthiaux (Ecole Centrale Paris, France) assisted by twelve European experts who contributed jointly to the nine chapters of this handbook. Main topics dealt with are tribocorrosion phenomena in medical and industrial sectors, depassivation and repassivation phenomena, impact on synergism in tribocorrosion, specific testing techniques, coupling tribology-to-corrosion, design of a testing protocol, and normalisation.

Download or read book Understanding Biocorrosion written by T Liengen and published by Elsevier. This book was released on 2014-11-14 with total page 447 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biocorrosion refers to corrosion influenced by bacteria adhering to surfaces in biofilms. Biocorrosion is a major problem in areas such as cooling systems and marine structures where biofilms can develop. This book summarises key recent research in this subject. Part one looks at theories of biocorrosion and measurement techniques. Part two discusses how bacteria and biofilms result in biocorrosion. The final part of the book includes case studies of biocorrosion in areas as diverse as buildings, fuels, marine environments and cooling systems. - Provides a detailed overview of biocorrosion and the different scientific and/or industrial problems related to microbially induced corrosion - Introduces a variety of investigative techniques and methodologies that are employed in diagnosing and evaluating microbially induced corrosion - Includes case studies on: biodeterioration of building materials; biocorrosion issues associated with diesel and biofuels; marine biocorrosion; corrosion of open recirculating cooling water systems and cooling system components; the effect of H2S on steel corrosion

Download or read book Corrosion in Refineries written by J Harston and published by Elsevier. This book was released on 2014-01-23 with total page 129 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion in ageing refinery plant presents a serious safety hazard. This important book summarises key research into corrosion processes in refinery equipment, how it can be measured and controlled. The book reviews factors affecting corrosion such as carburisation and metal dusting as well as corrosion in steel and other materials used in refinery technology. It considers corrosion in a range of refinery equipment such as storage tanks, HF alkylation units, sour water strippers and insulated units. Other chapters discuss ways of testing for corrosion and cracking in refineries together with integrity and life cycle assessment techniques. There is also coverage of ways of trouble-shooting corrosion problems and preventative measures such as coating systems.With its distinguished editor and team of contributors, Corrosion in refineries is a valuable reference for all those concerned with building and maintaining refineries in the petrochemical industry. - Summarises key research into corrosion processes in refinery equipment - Discusses ways of testing for corrosion and cracking in refineries

Download or read book Local Probe Techniques for Corrosion Research written by R Oltra and published by Elsevier. This book was released on 2014-01-23 with total page 207 pages. Available in PDF, EPUB and Kindle. Book excerpt: The effective investigation of corrosion requires the use of methods that can probe material surfaces at the atomic or molecular level and can be used in situ. This important collection reviews the range of techniques available and how they can be used to analyse different types of corrosion.A number of chapters discuss the use of scanning probe microscopy techniques such as electrochemical scanning tunnelling microscopy and atomic force microscopy (EC-STM and EC-AFM). Other chapters analyse local electrochemical techniques such as scanning electrochemical microscopy (SECM), scanning vibrating electrode techniques (SVET), scanning droplet and scanning kelvin probe microscopy (SKFM), as well as microraman spectroscopy and photoelectrochemical imaging. The book reviews the application of these techniques in practice to various metals and types of coating as well as different kinds of corrosion.With its distinguished editors and team of contributors, this is a valuable reference for all those concerned with corrosion research. - Discusses methods that can probe material surfaces at the atomic or molecular level - A valuable reference for all those concerned with corrosion research

Download or read book The Progress in Corrosion The First 50 Years of the EFC written by Paul McIntyre and published by CRC Press. This book was released on 2024-11-15 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on developments during the first fifty years of existence of the European Federation of Corrosion, and describes the contributions made by its working parties.

Download or read book Corrosion by Carbon and Nitrogen written by H Grabke and published by Elsevier. This book was released on 2014-01-23 with total page 331 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal dusting is a form of corrosion involving the disintegration of metals and alloys into a dust of graphite and metal particles when exposed to a carburizing atmosphere. This important book reviews the factors affecting metal dusting and how it can be prevented in sectors such as the chemical and petrochemical industries and in the direct reduction of iron ores. It also considers the related corrosion phenomena of carburization and nitridation.After an introductory chapter setting out the key processes involved in metal dusting, the book reviews how this corrosion process affects a range of metals such as iron and steel, as well as nickel-based and chromium-based high-temperature alloys. There are chapters on the effects of particular gas mixtures on the corrosion process and on the use of coatings to prevent metal dusting. Processes involved in carburization and nitridation are also described and discussed.With its distinguished editors and team of contributors, Corrosion by carbon and nitrogen is a valuable reference for all those concerned with understanding and preventing these corrosion processes in various industries. - Reviews this corrosion process and how it affects the petrochemical and other industries - Discusses the effect of particular gas mixtures on the corrosion process

Download or read book Corrosion of Reinforcement in Concrete EFC 25 written by J. Mietz and published by CRC Press. This book was released on 2020-08-13 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book compiles the full papers presented in the successful session "Corrosion of Steel in Concrete" at EUROCORR '97. It highlights the areas of technical development in this field, including monitoring of steel reinforcement corrosion, prevention of corrosion and electrochemical repair methods.

Download or read book Engineering Tools for Corrosion written by Luciano Lazzari and published by Woodhead Publishing. This book was released on 2017-07-28 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering Tools for Corrosion: Design and Diagnosis proposes models and equations derived from theory. It includes discussions of the estimation of main corrosion parameters for corrosion rate, electrochemical constraints, thresholds limits and initiation time. The algorithms proposed are the conjugation of theory and engineering practice resulting from research and professional activities carried out by the author for almost four decades. - Presents a rational approach to the corrosion prediction and evaluation dilemma - Illustrates new models and algorithms for quantitative estimation of corrosion related factors and parameters - Includes the design and interpretation of accelerated corrosion tests

Download or read book Amine Unit Corrosion in Refineries written by J Harston and published by Elsevier. This book was released on 2007-04-18 with total page 55 pages. Available in PDF, EPUB and Kindle. Book excerpt: The corrosion of carbon steels in amine units used for gas treatment in refining operations is a major problem for the petrochemical industry. Maximising amine unit reliability, together with improving throughput, circulation and treatment capacity, requires more effective ways of measuring and predicting corrosion rates. However, there has been a lack of data on corrosion. This valuable report helps to remedy this lack of information by summarising findings from over 30 plants. It covers such amine types as methyl diethanolamine (MDEA), diethanolamine (DEA), monoethanolamine (MEA) and di-isopropanolamine (DIPA), and makes recommendations on materials and process parameters to maximise amine unit efficiency and reliability. - Covers such amine types as Methyl Diethanolamine (MDEA) and Di-isopropanolamine - Makes recommendations on materials and process parameters to maximise amine unit efficiency and reliability

Download or read book Corrosion Modelling with Cellular Automata written by Damien Feron and published by Elsevier. This book was released on 2024-03-18 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion Modelling with Cellular Automata bridges the gap between finer scales based on atomic physics and the larger-scale based on physico-chemical properties of materials and their environments. The book describes the simulation and modeling of corrosion phenomena by cellular automata and underlines the collaborative and interdisciplinary relationships that underpin them. It explores the major achievements that have been performed to date, covers basic knowledge on cellular automata and corrosion phenomena, and includes sections on CA modeling of generalized and uniform corrosion in 2D and 3D under various conditions, including aqueous environments and high temperature processes. Finals sections present examples on the use of cellular automata for modeling localized corrosion as well as recent developments on intergranular corrosion. There is also a review on the use of CA for modeling pitting corrosion. - Focuses on the use of cellular automata for modeling corrosion - Covers recent advances in modeling generalized corrosion with cellular automata - Illustrates how cellular automata can be used to model localized corrosion (pitting and intergranular corrosion) - Spans various length scales from atomistic to mesoscale

Download or read book Corrosion Management of Seawater Cooling Systems written by Francois Ropital and published by Elsevier. This book was released on 2024-06-15 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion Management of Seawater Cooling Systems, Volume 71 provides an overview on main seawater heat exchanger systems, different forms of corrosion, biocide treatments, corrosion, scale inhibitors, materials used, coatings and cathodic protection, maintenance, and monitoring and control. The book will be a valuable reference resource for academics, technicians and engineers who are interested in the corrosion management of seawater cooling systems. The evolution of practices in terms of sustainability, materials choice, treatment selection and changes to regulations have demonstrated the need to establish this new guide on recommended best practices that support corrosion management and the development of seawater heat exchangers. Seawater is considered an attractive resource for utilities in many industries such as power plants, refineries and chemical plants. Seawater cooling systems are used in heat exchangers, in once-through cooling water systems, and for recirculating cooling water systems. The metallurgy and materials used in these facilities need to be compatible with seawater and allow good corrosion control. As seawater composition and suspended solids can cause corrosion, scaling, fouling, microbiological growth and macrofouling problems, this book is a necessary addition to the conversation. - Covers key technological developments in corrosion management of seawater cooling systems - Includes coverage of seawater heat exchangers - Provides information on many different forms of corrosion - Presents tactics for the selection of materials, corrosion protections (inhibitors, coatings, cathodic protection) - Discusses maintenance, control, monitoring and inspection

Download or read book Nuclear Corrosion written by Stefan Ritter and published by Woodhead Publishing. This book was released on 2020-08-14 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nuclear Corrosion: Research, Progress and Challenges, part of the "Green Book series of the EFC, builds upon the foundations of the very first book published in this series in 1989 ("Number 1 - Corrosion in the Nuclear Industry). This newest volume provides an overview on state-of-the-art research in some of the most important areas of nuclear corrosion. Chapters covered include aging phenomena in light water reactors, reprocessing plants, nuclear waste disposal, and supercritical water and liquid metal systems. This book will be a vital resource for both researchers and engineers working within the nuclear field in both academic and industrial environments. - Discusses industry related aspects of materials in nuclear power generation and how these materials react with the environment - Provides comprehensive coverage of the topic as written by noted experts in the field - Includes coverage of nuclear waste corrosion

Download or read book Corrosion Monitoring in Nuclear Systems EFC 56 written by Stefan Ritter and published by Routledge. This book was released on 2017-09-20 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion remains one of the key issues affecting the performance and availability of nuclear power plants. Therefore, reliable in-plant corrosion monitoring methods are essential both for the future operation of existing plants and to ensure the safety of future nuclear waste disposal systems. In two parts, this book was stimulated by a workshop organised by EFC Working Party 4 on Nuclear Corrosion and the European Cooperative Group on Corrosion Monitoring of Nuclear Materials (EGC-COMON). The first part deals mainly with research into the detection of stress corrosion crack initiation in nuclear power plant environments (essentially high temperature water at around 300 °C) by various methods, particularly the electrochemical noise technique but also including the electrochemical impedance, acoustic emission and direct current potential drop methods. The second part addresses the goal to develop in-situ techniques and includes examples of the application of electrochemical corrosion potential monitoring. This book will be of particular interest to scientists and engineers concerned with the mitigation of corrosion in nuclear systems.

Download or read book Prediction of Long Term Corrosion Behaviour in Nuclear Waste Systems EFC 36 written by Damien Feron and published by CRC Press. This book was released on 2024-11-01 with total page 692 pages. Available in PDF, EPUB and Kindle. Book excerpt: Papers presented on prediction of long term corrosion behaviour in nuclear waste systems EFC Issue 36.