Download or read book A Translation of Flexible Plates and Shells written by Arnolʹd Sergeevich Volʹmir and published by . This book was released on 1967 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is concerned with the general theory of finite deflections of thin elastic plates and shells. The nature of the governing equations is such that deflections are essentially limited to several times the plate or shell thickness, in the spirit of the usual von Karman approximation. Finite deflections of laterally loaded rectangular plates with various edge conditions are treated in detail. The postbuckling behavior of ordinary and rib-stiffened rectangular plates subject to in-plane loads is also examined. The finite deflections of circular plates subject to axisymmetric lateral or in-plane loads are examined. Finite deflections of shallow shells in the form of curved panels subject to lateral load are studied on the basis of an approximate shell theory. The postbuckling behavior of cylindrical panels subject to various in-plane normal and shear forces is treated in detail. The finite-deflection buckling of circular cylindrical shells subject to axial compression, lateral loads, or torsion is examined with a consideration of the effects of initial geometric imperfections. Lastly, the finite-deformation buckling of spherical shells and spherical caps is treated by an approximate shell theory. The approximate theories are correlated with available experimental evidence wherever possible.

Download or read book NASA Technical Translation written by and published by . This book was released on 1966 with total page 1086 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1974 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Survey of Investigations on the Theory of Flexible Plates and Shells covering the Period from 1941 to 1957 written by Arnolʹd Sergeevich Volʹmir and published by . This book was released on 1963 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Deterministic Chaos In One Dimensional Continuous Systems written by Jan Awrejcewicz and published by World Scientific. This book was released on 2016-03-14 with total page 577 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the computational analysis of nonlinear vibrations of structural members (beams, plates, panels, shells), where the studied dynamical problems can be reduced to the consideration of one spatial variable and time. The reduction is carried out based on a formal mathematical approach aimed at reducing the problems with infinite dimension to finite ones. The process also includes a transition from governing nonlinear partial differential equations to a set of finite number of ordinary differential equations.Beginning with an overview of the recent results devoted to the analysis and control of nonlinear dynamics of structural members, placing emphasis on stability, buckling, bifurcation and deterministic chaos, simple chaotic systems are briefly discussed. Next, bifurcation and chaotic dynamics of the Euler-Bernoulli and Timoshenko beams including the geometric and physical nonlinearity as well as the elastic-plastic deformations are illustrated. Despite the employed classical numerical analysis of nonlinear phenomena, the various wavelet transforms and the four Lyapunov exponents are used to detect, monitor and possibly control chaos, hyper-chaos, hyper-hyper-chaos and deep chaos exhibited by rectangular plate-strips and cylindrical panels.The book is intended for post-graduate and doctoral students, applied mathematicians, physicists, teachers and lecturers of universities and companies dealing with a nonlinear dynamical system, as well as theoretically inclined engineers of mechanical and civil engineering.

Download or read book Progress in Applied Mechanics written by Yeh Kai-Yuan and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: Prof. W. Z. Chien was born on 9 October, 1912 and 1982 saw the 70th anniversary of his birth. Some of his friends, colleagues, and former students prepared this special volume in honour of his outstanding contribution to the field of mechanics. The volume does not contain contributions from all of his students and friends and for this we apologize. Prof. Chien's family have lived. in Qufangquiao Village, Hongshengli, Wuxi County, Jiangsu Province for generations. Many members of his family have been teachers in this village. When he was 14 years old his father died and for a time it appeared necessary to terminate his education but, fortunately, an uncle, Chien Mu, who later became a very famous historian in China, came to his aid and he was able to continue his studies. In 1931 he took entrance exams and was simultaneously admitted to five prestigious Chinese universities. Of these, he chose to enter Tsing-hau University in Beijing, with major work in physics. He received his baccaulaurate in 1935 and taught at middle school for a time until he was awarded a Sino:'British scholarship to study abroad. In the competition for this award, three of the recipients were in the field of mechanics: Prof. C. C. Lin, Prof. Kuo Yung-huai, and Prof. Chien Wei-zang. All three arrived in Toronto in August, 1940 and entered the Depart ment of Applied Mathematics of the University of Toronto to study under Prof. J. L. Synge.

Download or read book Buckling of Bars Plates and Shells written by Robert Millard Jones and published by Bull Ridge Corporation. This book was released on 2006 with total page 850 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Introduction to the Explicit Finite Element Method for Nonlinear Transient Dynamics written by Shen R. Wu and published by John Wiley & Sons. This book was released on 2012-07-30 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: A systematic introduction to the theories and formulations of the explicit finite element method As numerical technology continues to grow and evolve with industrial applications, understanding the explicit finite element method has become increasingly important, particularly in the areas of crashworthiness, metal forming, and impact engineering. Introduction to the Explicit Finite Element Method for Nonlinear Transient Dynamics is the first book to address specifically what is now accepted as the most successful numerical tool for nonlinear transient dynamics. The book aids readers in mastering the explicit finite element method and programming code without requiring extensive background knowledge of the general finite element. The authors present topics relating to the variational principle, numerical procedure, mechanical formulation, and fundamental achievements of the convergence theory. In addition, key topics and techniques are provided in four clearly organized sections: • Fundamentals explores a framework of the explicit finite element method for nonlinear transient dynamics and highlights achievements related to the convergence theory • Element Technology discusses four-node, three-node, eight-node, and two-node element theories • Material Models outlines models of plasticity and other nonlinear materials as well as the mechanics model of ductile damage • Contact and Constraint Conditions covers subjects related to three-dimensional surface contact, with examples solved analytically, as well as discussions on kinematic constraint conditions Throughout the book, vivid figures illustrate the ideas and key features of the explicit finite element method. Examples clearly present results, featuring both theoretical assessments and industrial applications. Introduction to the Explicit Finite Element Method for Nonlinear Transient Dynamics is an ideal book for both engineers who require more theoretical discussions and for theoreticians searching for interesting and challenging research topics. The book also serves as an excellent resource for courses on applied mathematics, applied mechanics, and numerical methods at the graduate level.

Download or read book New Approaches to Structural Mechanics Shells and Biological Structures written by Horace R. Drew and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Festschrift marks the retirement of Professor Chris Calladine, FRS after 42 years on the teaching staff of the Department of Engineering, University of Cambridge. It contains a series of papers contributed by his former students, colleagues, and friends. Chris Calladine's research has ranged very widely across the field of struc tural mechanics, with a particular focus on the plastic deformation of solids and structures, and the behaviour of thin-shell structures. His insightful books on Engineering Plasticity and Theory of Shell Structures have been appreciated by many generations of students at Cambridge and elsewhere. His scientific contri bution outside engineering, in molecular structures, is at least as significant, and he is unique among engineers in having co-authored a book on DNA. Also, he has been keenly interested in the research of many students and colleagues, and on many occasions his quick grasp and physical insight have helped a student, and sometimes a colleague, find the nub of the problem without unnecessary effort. Many of the papers contained in this volume gratefully acknowledge this generous contribution. We thank Professor G. M. l. Gladwell for reading through all of the contri butions, Mrs R. Baxter and Mrs o. Constantinides for help in preparing this volume, Godfrey Argent Studio for permission to reproduce Calladine's por trait for the Royal Society, and Dr A. Schouwenburg -from Kluwer- for his assistance. Horace R. Drew Sergio Pellegrino ix CHRIS CALLADINE SOME THOUGHTS ON RESEARCH c. R.

Download or read book Memoirs of the Faculty of Engineering Osaka City University written by Ōsaka Shiritsu Daigaku. Kōgakubu and published by . This book was released on 1997 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Technical Abstract Bulletin written by and published by . This book was released on with total page 908 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Theories and Applications of Plate Analysis written by Rudolph Szilard and published by John Wiley & Sons. This book was released on 2004-01-02 with total page 1062 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book by a renowned structural engineer offers comprehensive coverage of both static and dynamic analysis of plate behavior, including classical, numerical, and engineering solutions. It contains more than 100 worked examples showing step by step how the various types of analysis are performed.

Download or read book NASA Translation List written by United States. National Aeronautics and Space Administration and published by . This book was released on 1961 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Sixth International Conference on Nonlinear Mechanics ICNM 6 written by Zhe-wei Zhou and published by DEStech Publications, Inc. This book was released on 2013-08-30 with total page 641 pages. Available in PDF, EPUB and Kindle. Book excerpt: Novel mathematical and modeling approaches to problems in graded materials, biological materials, fluid mechanics and more Covers nanomechanics, multi-scale modeling, interface mechanics and microstructure This series volume contains 128 not previously published research presentations on using nonlinear mechanics to understand and model a wide variety of materials, including polymers, metals and composites, as well as subcellular and cellular tissues. Focus is on numerical and physics approaches to representing multiscale relationships within complex solids and fluids systems, with applications in materials science, energy storage, medical diagnostics and treatment, and biotechnology. TABLE OF CONTENTS Preface Committees SESSION 1: INVITED LECTURES Micro-Macro Analysis of Creep and Damage Behavior of Multi-Pass Welds Some New Developments in Non-Linear Solid Mechanics Design of Material Systems: Mathematics and Physics of the Archetype-Genome Exemplar Criticism of Generally Accepted Fundamentals and Methodologies of Traffic and Transportation Theory SESSION 2: NONLINEAR CONTINUUM MECHANICS Geometrically Nonlinear Analysis of Simple Plane Frames of Functionally Graded Materials Thermal Post-Buckling of FG Circular Plates Under Transversely Point-Space Constraint Tunability of Longitudinal Wave Band Gap in One Dimensional Magneto-Elastic Phononic Crystal Teaching Nonlinear Mechanics at the Undergraduate and Graduate Level—Two Examples Geometrically Nonlinear FE Instability Simulations of Hinged Composite Laminated Cylindrical Shells Constitutive Relation of Martensitic Transformation in CuAlNi Based on Atomistic Simulations Soft Behaviors of Beam Shaped Liquid Crystal Elastomers Under Light Actuations XFEM Based Discontinuity Simulation for Saturated Soil Numerical Algorithm of Solving the Problem of Large Elastic-Plastic Deformation by FEM Finite Deformation for Everted Compressible Hypereleastic Cylindrical Tubes Modelling and Non-Linear Free Vibrations of Cable-Stayed Beam Wavelet Solution of a Class of Nonlinear Boundary Value Problems Axial Compression of a Rectangular Rubber Ring Composed of an Incompressible Mooney-Rivlin Material Influence of Concentration-Dependent Elastic Modulus and Charge or Discharge Rate on Tensile Stress in Anode An Integral Equation Approach to the Fully Nonlinear Fluid Flow Problem in an Infinite Channel Over Arbitrary Bottom Topography Analysis of Nonlinear Dynamical Characteristics for Thermoelastic Half-Plane with Voids Tensor Model for Dynamic Damage of Ductile Metals Over a Wide Range of Strain Rates SESSION 3: MULTI-SCALE MECHANICS AND MULTI-PHYSICS MODELING The Nonlinear Magnetoelectric Effect of Layered Magnetoelectric Composite Cylinder with an Imperfect Interface A Solution for Nonlinear Poisson-Neumann Problem of Nb3Sn Superconducting Transport Current Temperature Effect on the Tensile Mechanical Properties of Graphene Nanoribbons Square Inclusion with a Nonlinear Eigenstrain in an Anisotropic Piezoelectric Full Plane Nonlinear Analysis of the Threaded Connection with Three-Dimensional Finite Element Model Effects of Particle Volume Fraction on the Macro-Thermo-Mechanical Behaviors in Plate-Type Dispersion Nuclear Fuel Elements Mechanics of Semiflexible Polymer Chains Under Confinements Study on the Solution of Reynolds Equation for Micro Gas Bearings Using the Alternating-Direction Implication Algorithm Atomistic Study of Li Concentration Dependence of the Mechanical Properties of Graphite Anode in Li-ion Battery 3D Extrusion Simulation of the Single Screw Head and Optimization Design Buckling Behavior of Defective Carbon Nanotubes Elastic Properties of Single-Stranded DNA Biofilm with Strong Interactions Analysis on Thickness Dependence of Jc Caused by Dislocations and Grain Boundaries in YBCO Superconducting Films Operating Strain Response in CICC Coils Through Nonlinear Finite Element Modeling Dynamics Analysis of a Multi-Degree-of-Freedom Electro-Hydraulic Mix-Drive Motion Simulator by KANE Equation Multiscale 3D Fracture Simulation Integrating Tomographic Characterization Research into Compressive Mechanical Properties of Special Piezomagnetic Material Sheets A Numerical Study on Detonation Wave Propagation Using High-Precision and High-Resolution Schemes SESSION 4: STRUCTURAL DYNAMIC AND STRUCTURE-FLUID INTERACTIONS A Study on Pure IL VIV of a Marine Riser in Shear Current Parametric Studies on Nonlinear Flutter of High-Aspect-Ratio Flexible Wings Model Reduction of a Flexible Beam Rotating at High Speed Considering Dynamic Stiffening Vibration Modal Analysis of Cantilever Beams with Complicated Elasticity Boundary Constraint Numerical Simulation of Ahmed Model in Consideration of the FSI Effect Aerodynamic Damping of a Hammerhead Launch Vehicle in Transonic Flow Symmetry Reductions and Explicit Solutions of (3 + 1)-Dimensional Kadomtsev-Petviashvili (KP) Equation Nonlinear Behaviors of an Isotropic Incompressible Hyperelastic Spherical Membrane Under Different Dynamic Loads Creep Buckling of Viscoelastic Plate Consdering Higher Order Modes SESSION 5: COMPLEX FLUID FLOW AND NONLINEAR STABILITY Homotopy Analysis of Korteweg-de Vries Equation with Time Delay Homotopy Analysis Method for Bubble Pulsation Equation with Nonlinear Term of Fractional Power Chebyshev Finite Spectral Method for Boussinesq-Type Equations on Staggered Grids Twin Jets in Crossflow Application of Fixed Point Method to Obtain a Semi-Analytical Solution of Stagnation Flow On the Nonlinear Stability of Laminar Flow Between Parallel Planes Boundary Treatments in Lattice Boltzmann Method A Lattice Boltzmann Based Immersed Boundary Method for Fluid-Structure Interaction Numerical Solutions of Convection-Diffusion Equations by Hybrid Discontinuous Galerkin Methods Steady-State Solutions of the Wave-Bottom Resonant Interaction Lattice Boltzmann Simulation of the Shock Damping and the Shock Increased by Means of Lorentz Force Analysis of the Effects of Nonlinear Characteristics of Lag Dampers on Helicopter Ground Resonance Flow Structures and Sound Radiation in Supersonic Mixing Layers with Nonlinear PSE Method Turbulent Structures in Subsonic Jet Flow Forced by Random Disturbances Exponential p-Stability for a Delayed Recurrent Neural Networks with Impulses Spatial Variation of Scaling Exponents for Structure Functions in a Decaying Turbulence SESSION 6: NONLINEAR DYNAMIC OF STRUCTURE Analysis of Chaos Behavior of Single Mode Vibration of Cable-Stayed Chaotification of Fractional Maps Nonlinear Finite Element Analysis of the Dynamic Axial Crushing of Empty Hexagonal Tube Active Control of a Nonlinear Aeroelastic System Using the Receptance Method Dynamics Analysis of the FHN Neuronal Model Analyzing the Effect of the Axial Force to the Natural Frequencies of Arch Stable Periodic Response of One-Way Clutches in a Two-Pulley Belt-Drive Model Supercritical Nonlinear Dynamics of an Axially Moving Viscoelastic Beam with Speed Fluctuation Nonlinear Dynamic Response to a Moving Force of Timoshenko Beams Resting on Pasternak Foundations An Improved Method for the Construction of Nonlinear Operator in Homotopy Analysis Method A Nonlinear Integration Scheme for Evolutionary Differential Equations A Comparative Study of Civil Aircraft Crashworthiness with Different Ground Conditions Improved Dynamic Analysis of Development of Pulmonary Edema The Timescale Function Method for Solving Free Vibration of Nonlinear Oscillator Nonlinear Aeroelastic Analysis of Flexible Wings with High-Aspect-Ratio Considering Large Deflection Differential Quadrature Method for Vibration Analysis of Finite Beams on Nonlinear Viscoelastic Foundations Numerical Simulation on the Strength and Sealing Performance for High-Pressure Isolating Flange Nonlinear Dynamical Stability of the Lattices with Initial Material and Geometric Imperfection Nonlinear Vibration of Symmetric Angle-Ply Laminated Piezoelectric Plates with Linearly Varying Thickness An Exact Free Vibration Frequency Formula for Oscillator with Single-Term Positive-Power Restoring Force An Exact Solution of Synchronization State for a Class of Networked Mass-Spring-Damper Oscillator Systems SESSION 7: INTERFACE MECHANICS AND ENGINEERING APPLICATION Numerical Simulation of Free Surface Collapse in Propellant Tank Restudy on the Adaptive Mesh Technique for Seepage Problems High-Order Series Solutions of Wave and Current Interactions Deformation and Stress Distribution of Arterial Walls of the Aged A p53-Mdm2 Dynamical Model Induced by Laminar Shear Stress in Endothelial Cells Optimized Image Processing Based on CUDA in a Combined Measurement Technique of PIV and Shadowgraph 3D Visualization of the Flow Fields Using Digital In-Line Holography Analysis and Experimental Study on Air Foam Flooding Seepage Flow Mechanics Experimental Measurements for Mechanical and Electrical Conductive Properties of CNT Bundles Analysis on Dynamic Response of Bedding Rock Slope with Bolts under Earthquakes Numerical Prediction of Aerodynamic Noise Radiated from High Speed Train Pantograph Effects of Length on Aerodynamics of High Speed Train Models Free Convection Nanofluid Flow in the Stagnation-Point Region of a Three Dimensional Body Vertical Distribution and Dynamic Release Characteristics of Pollutants from Resuspended Sediment Numerical Simulation of the Contaminant Release Through the Sediment-Overlying Water Interface Analysis on the Aerodynamic and Aero-Noise of MIRA Model Radial Squeeze Force of MR Fluid Between Two Cylinders Nonlinear Buckling Analysis and Ultimate Extended Capacity Research of Downhole Pipe Strings in Ultra-Deep Horizontal Wells A Novel Method of Generating Nonlinear Internal Wave in a Stratified Fluid Tank and Its Theoretical Model SESSION 8: MINI-SYMPOSIUM ON TRAFFIC FLUID Study on Correlation Analysis of Synchronized Flow in the Kerner-Klenov-Wolf Cellular Automation Model Numerical Simulation of Traffic Flow in the Rain or Snow Weather Condition First Order Phase Transitions in the Brake Light Cellular Automation Model Within the Fundamental Diagram Approach The Leader-Follower Winding Behavior of Pedestrians in a Queue Effect of Overpasses in Two-Dimensional Traffic Flow Model with Random Update Rule Analysis of the Density Wave in a New Continuum Model The Phenomenon of High-Speed-Car-Following on Chinese Highways A Lattice Hydrodynamic Model Considering the Difference of Density and its Analysis Experimental Feature of Car-Following Behaviors in a Platoon of 25 Vehicles Car-Following Model for Manual Transmission Vehicles The Mechanism of Synchronized Flow in Traffic Flow Modeling An Asymmetric Stochastic Car-Following Model Based on Extended Tau Theory A Gaussian Distribution Based Dual-Cognition Driver Behavior Model at Cross Traffic A New Traffic Kinetic Model Considering Potential Influence The Effect of Marks on the Pedestrian Evacuation Equilibrium Velocity Distribution Function for Traffic Flow Effects of Antilock Braking System on Driving Behavior Under Emergent Stability Analysis of Pedestrian Flow in Two-Dimensional Optimal Velocity Model with Asymmetric Interaction Simulation-Based Stability Analysis of Car-Following Models Under Heterogeneous Traffic Crossing Speed of Pedestrian at an Unsignalized Intersection Modeling Mixed Traffic Flow at a Crosswalk with Push Button Effects of Game Strategy Update on Pedestrian Evacuation in a Hall Study on Long-Term Correlation of CO and CO2 from Vehicle Emissions on Roadsides with the Detrended Fluctuation Analysis Method Bottleneck Effect on a Bidirectional Two-Lane Mixed Traffic Flow

Download or read book Effect of the Radiant Heat Component on Heat Transfer in Vacuum Sublimation written by Petr Andreevich Novikov and published by . This book was released on 1963 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Nonclassical Thermoelastic Problems in Nonlinear Dynamics of Shells written by Jan Awrejcewicz and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: From the reviews: "A unique feature of this book is the nice blend of engineering vividness and mathematical rigour. [...] The authors are to be congratulated for their valuable contribution to the literature in the area of theoretical thermoelasticity and vibration of plates." Journal of Sound and Vibration

Download or read book Thin Plates and Shells written by Eduard Ventsel and published by CRC Press. This book was released on 2001-08-24 with total page 688 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presenting recent principles of thin plate and shell theories, this book emphasizes novel analytical and numerical methods for solving linear and nonlinear plate and shell dilemmas, new theories for the design and analysis of thin plate-shell structures, and real-world numerical solutions, mechanics, and plate and shell models for engineering appli