Download or read book A Total Systems Analysis Method for the Conceptual Design of Spacecraft written by Knut I. Oxnevad and published by . This book was released on 1996 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Introduction to Space Systems written by Miguel A. Aguirre and published by Springer Science & Business Media. This book was released on 2012-08-16 with total page 505 pages. Available in PDF, EPUB and Kindle. Book excerpt: The definition of all space systems starts with the establishment of its fundamental parameters: requirements to be fulfilled, overall system and satellite design, analysis and design of the critical elements, developmental approach, cost, and schedule. There are only a few texts covering early design of space systems and none of them has been specifically dedicated to it. Furthermore all existing space engineering books concentrate on analysis. None of them deal with space system synthesis – with the interrelations between all the elements of the space system. Introduction to Space Systems concentrates on understanding the interaction between all the forces, both technical and non-technical, which influence the definition of a space system. This book refers to the entire system: space and ground segments, mission objectives as well as to cost, risk, and mission success probabilities. Introduction to Space Systems is divided into two parts. The first part analyzes the process of space system design in an abstract way. The second part of the book focuses on concrete aspects of the space system design process. It concentrates on interactions between design decisions and uses past design examples to illustrate these interactions. The idea is for the reader to acquire a good insight in what is a good design by analyzing these past designs.

Download or read book Space Transportation written by Walter Edward Hammond and published by AIAA. This book was released on 1999 with total page 740 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation This practical book gives young professionals all the information they need to know to get started in the space business. It takes you step-by-step through processes for systems engineering and acquisition, design and development, cost analysis, and program planning and analysis. You'll find the systems engineering and design process that applies to all space transportation systems, then the overall system architecture considerations that also apply to all space transportation systems. There is also detailed coverage of space launch vehicles by class, including the current space shuttle, other manned reusable systems, expendable systems, and future systems. A companion CD-ROM contains the Operations Simulation and Analysis Modeling System software.

Download or read book Spacecraft System Design written by Zhang Qingjun and published by CRC Press. This book was released on 2023-10-09 with total page 415 pages. Available in PDF, EPUB and Kindle. Book excerpt: Drawing on practical engineering experience and latest achievements of space technology in China, this title investigates spacecraft system design and introduces several design methods based on the model development process. A well-established space engineering system with spacecraft as the core is integral to spaceflight activities and missions of entering, exploring, developing and utilizing outer space. This book expounds the key phases in the workflow of spacecraft development, including task analysis, overall plan design, external interface, configuration and assembly design and experimental verification. Subsystems that function as the nuclei of spacecraft design and important aspects in the model development process are then examined, such as orbit design, environmental influence factors, reliability design, dynamics analysis, etc. In addition, it also discusses the digital environment and methods to improve the efficiency of system design. The title will appeal to researchers, students, and especially professionals interested in spacecraft system design and space engineering.

Download or read book Space Systems Conceptual Design written by Guido Ridolfi and published by . This book was released on 2013 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Design Methodologies for Space Transportation Systems written by Walter Edward Hammond and published by AIAA. This book was released on 2001 with total page 906 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation "Design Methodologies for Space Transportation Systems is a sequel to the author's earlier text, "Space Transportation: A Systems Approach to Analysis and Design. Both texts represent the most comprehensive exposition of the existing knowledge and practice in the design and project management of space transportation systems, and they reflect a wealth of experience by the author with the design and management of space systems. The text discusses new conceptual changes in the design philosophy away from multistage expendable vehicles to winged, reusable launch vehicles and presents an overview of the systems engineering and vehicle design process as well as systems trades and analysis. Individual chapters are devoted to specific disciplines such as aerodynamics, aerothermal analysis, structures, materials, propulsion, flight mechanics and trajectories, avionics and computers, and control systems. The final chapters deal with human factors, payload, launch and mission operations, safety, and mission assurance. The two texts by the author provide a valuable source of information for the space transportation community of designers, operators, and managers. A companion CD-ROM succinctly packages some oversized figures and tables, resources for systems engineering and launch ranges, and a compendium of software programs. The computer programs include the USAF AIRPLANE AND MISSILE DATCOM CODES (with extensive documentation); COSTMODL for software costing; OPGUID launch vehicle trajectory generator; SUPERFLO-a series of 11 programs intended for solving compressible flow problems in ducts and pipes found in industrial facilities; and a wealth of Microsoft Excel spreadsheet programs covering thedisciplines of statistics, vehicle trajectories, propulsion performance, math utilities,

Download or read book An Analysis Method for Conceptual Design of Complexity and Autonomy in Complex Space System Architectures written by Brandon Charles Wood and published by . This book was released on 2001 with total page 99 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Safety Design for Space Systems written by Gary Eugene Musgrave and published by Butterworth-Heinemann. This book was released on 2009-03-27 with total page 988 pages. Available in PDF, EPUB and Kindle. Book excerpt: Progress in space safety lies in the acceptance of safety design and engineering as an integral part of the design and implementation process for new space systems. Safety must be seen as the principle design driver of utmost importance from the outset of the design process, which is only achieved through a culture change that moves all stakeholders toward front-end loaded safety concepts. This approach entails a common understanding and mastering of basic principles of safety design for space systems at all levels of the program organisation. Fully supported by the International Association for the Advancement of Space Safety (IAASS), written by the leading figures in the industry, with frontline experience from projects ranging from the Apollo missions, Skylab, the Space Shuttle and the International Space Station, this book provides a comprehensive reference for aerospace engineers in industry. It addresses each of the key elements that impact on space systems safety, including: the space environment (natural and induced); human physiology in space; human rating factors; emergency capabilities; launch propellants and oxidizer systems; life support systems; battery and fuel cell safety; nuclear power generators (NPG) safety; habitat activities; fire protection; safety-critical software development; collision avoidance systems design; operations and on-orbit maintenance. The only comprehensive space systems safety reference, its must-have status within space agencies and suppliers, technical and aerospace libraries is practically guaranteed Written by the leading figures in the industry from NASA, ESA, JAXA, (et cetera), with frontline experience from projects ranging from the Apollo missions, Skylab, the Space Shuttle, small and large satellite systems, and the International Space Station Superb quality information for engineers, programme managers, suppliers and aerospace technologists; fully supported by the IAASS (International Association for the Advancement of Space Safety)

Download or read book EuSEC 2000 written by Herbert Negele and published by Herbert Utz Verlag. This book was released on 2000 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Bringing Policy Into Space Systems Conceptual Design written by Annalisa Lynn Weigel and published by . This book was released on 2002 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: (Cont.) The analysis techniques presented in this thesis for assessing and insuring policy robustness can be applied as early as the conceptualization phase of system architecting and design, and the earlier they are applied in the process, the greater the benefits that can be derived. As the architecture and system design solidify, time and opportunities are lost to tailor a system for policy robustness.

Download or read book Simulating Spacecraft Systems written by Jens Eickhoff and published by Springer Science & Business Media. This book was released on 2009-09-25 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: Satellite development worldwide has significantly changed within the last decade and has been accelerated and optimized by modern simulation tools. The classic method of developing and testing several models of a satellite and its subsystems with the aim to build a pre-flight and finally a flight model is being replaced more and more by a considerably faster and more inexpensive method. The new approach no longer includes functional test models on entire spacecraft level but a system simulation. Thus overall project runtimes can be shortened. But also significantly more complex systems can be managed and success oriented tests on integration and software level can be realized before the launch. Applying modern simulation infrastructures already during spacecraft development phase, enables the consistent functionality checking of all systems both in detail and concerning their interaction. Furthermore, they enable checks of the system's proper functionality, their reliability and safety / redundancy. But also analysis regarding aging and lifetime issues can be performed by simulation. Project-related simulations of operational scenarios, for example with remote sensing satellites, and the checking of different operational modes are of similar importance. On the whole, risk is reduced significantly and the satellite can be produced in a considerably more cost efficient way, with higher quality and in shorter periods of time. Therefore "Simulating Spacecraft Systems" - the title of the present book - is an important domain of modern system engineering, which meanwhile has successfully established a position in many other sectors of industry and research, too.

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lists citations with abstracts for aerospace related reports obtained from world wide sources and announces documents that have recently been entered into the NASA Scientific and Technical Information Database.

Download or read book Technology for Large Space Systems written by and published by . This book was released on 1982 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Feasibility Study of Satellite borne Lidar Global Wind Monitoring System written by R. Milton Huffaker and published by . This book was released on 1980 with total page 142 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Large Space Structures Systems in the Space Station Era written by and published by . This book was released on 1990 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book NASA Technical Memorandum written by and published by . This book was released on 1984 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Integrating O S Models During Conceptual Design written by National Aeronautics and Space Adm Nasa and published by Independently Published. This book was released on 2018-11-05 with total page 86 pages. Available in PDF, EPUB and Kindle. Book excerpt: The University of Dayton is pleased to submit this report to the National Aeronautics and Space Administration (NASA), Langley Research Center, which integrates a set of models for determining operational capabilities and support requirements during the conceptual design of proposed space systems. This research provides for the integration of the reliability and maintainability (R&M) model, both new and existing simulation models, and existing operations and support (O&S) costing equations in arriving at a complete analysis methodology. Details concerning the R&M model and the O&S costing model may be found in previous reports accomplished under this grant (NASA Research Grant NAG1-1327). In the process of developing this comprehensive analysis approach, significant enhancements were made to the R&M model, updates to the O&S costing model were accomplished, and a new simulation model developed. This is the 1st part of a 3 part technical report. Ebeling, Charles E. Unspecified Center...