Download or read book A Technical economic Evaluation of Various Process Alternatives for the Production of Ethanol from Dilute Glucose Solutions written by and published by . This book was released on 1995 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Economic Evaluation of TVA s Dilute Acid Process for Ethanol Production from Tennessee Valley Hardwoods written by and published by . This book was released on 1989 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Economic Evaluation of U S Ethanol Production from Ligno cellulosic Feedstocks written by Youn-Sang Choi and published by . This book was released on 1998 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: This paper evaluates the economic feasibility and economy-wide impacts of the U.S. ethanol production from lignocellulosic feedstocks (LCF) using Tennessee Valley Authority's (TVA's) dilute acid hydrolysis process. A nonlinear mathematical programming model of a single ethanol producer, whose objective is profit maximization, is developed. Because of differences in their chemical composition and production process, lignocellulosic feedstocks are divided into two groups: Biomass feedstocks, which refer to crop residues, energy crops and woody biomass, and municipal solid waste (MSW). Biomass feedstocks are more productive and less costly in producing ethanol and co-products, while MSW generates an additional income to the producer from a tipping fee and recycling. The analysis suggests that, regardless of types of feedstocks used, TVA's conversion process can enhance the economic viability of ethanol production as long as furfural is produced from the hemicellulose fraction of feedstocks as a co-product. The high price of furfural makes it a major factor in determining the economic feasibility of ethanol production. Along with evaluating economic feasibility of LCF-to-ethanol production, the optimal size of a plant producing ethanol using TVA's conversion process is estimated. The larger plant would have the advantage of economies of scale, but also have a disadvantage of increased collection and transportation costs for bulky biomass from more distant locations. We assume that the plant is located in the state of Missouri and utilizes only feedstocks produced in the state. The results indicate that the size of a plant using Biomass feedstocks is much bigger than one using MSW. The difference of plant sizes results from plant location and feedstock availability. One interesting finding is that energy crops are not feasible feedstocks for LCF-to-ethanol production due to their high price. Next, a static CGE model is developed to estimate the U.S. economy-wide impacts of the current ethanol production with a government subsidy and the LCF-to-ethanol production using TVA's dilute acid hydrolysis process. The model is innovative in three ways. First, a production subsidy is explicitly included in the model. Second, co-products are explicitly accounted for in ethanol production. Third, ethanol and gasoline are treated as perfect demand substitutes, as are the co-products and the manufacturing sector's output. The CGE model shows that current ethanol production expands grain crop production by creating an additional demand. In contrast, LCF-to-ethanol production has adverse impacts on grain crop production because Biomass feedstocks substitute for grain in the production of ethanol. The LCF-to-ethanol production also discourages the manufacturing industry because co-products displace a part of intermediate input demand for manufacturing outputs. It is also found that, even though ethanol production using TVA's conversion technology with MSW is economically viable, it is not favorable to the economy. Finally, the results suggest that ethanol production from Biomass feedstocks using TVA's dilute acid hydrolysis process is beneficial to the U.S. economy.
Download or read book Current Abstracts written by and published by . This book was released on 1995-07 with total page 76 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Biochemical Conversion of Lignocellulosic Biomass to Ethanol written by Deepak Kumar and published by . This book was released on 2014 with total page 207 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ethanol production from lignocellulosic feedstock has been under intense scrutiny as a transportation fuel due to its potential to address concerns of increasing energy consumption, limited fossil energy resources, climate changes due to greenhouse gas emissions from fossil fuels, and especially use of non-food biomaterials, which address the biggest limitation of first generation bioethanol. Despite these advantages, the lignocellulosic ethanol production on commercial scale is still on verge because of high processing costs of ethanol production. In the biochemical conversion process, biomass is converted to ethanol by sequential steps of pretreatment (to reduce the recalcitrance of biomass), hydrolysis (conversion of sugar polymers to monomers) and fermentation (sugars to ethanol). Every year, about a million ton of grass straw is available as agricultural residue in Pacific Northwest. There were no previous comprehensive studies to evaluate the technical feasibility, economic viability and environmental sustainability of the bioethanol produced using grass straw in Willamette valley. The focus of this dissertation was to investigate the potential of cellulosic ethanol production from grass straw, assess the techno-economic viability and environmental impacts of the bioethanol production and development of a stochastic molecular model for modeling cellulose hydrolysis. This dissertation was divided into four studies focused on individual aspects of the overall objective. The first study evaluated the ethanol production potential from straws produced from three major grass seed varieties (perennial ryegrass (Lolium perenne L.), tall fescue (Festuca arundinacea Schreb) and bentgrass (Agrostis sp.)) in Pacific Northwest. Feedstocks were pretreated using three chemical pretreatments (dilute acid, dilute alkali, and hot water) and subsequently hydrolyzed enzymatically to investigate the effect of pretreatment and estimate the potential ethanol yields. Carbohydrate content in biomass varied from 40.6 to 52.9%, with tall fescue having the maximum cellulose content of 32.4%. All pretreatment were effective in increasing the hydrolysis yields, and theoretical maximum ethanol yields were in the range of 276 to 360 L per ton of biomass. The second study performed the comprehensive techno-economic analysis of ethanol production from tall fescue using dilute acid, dilute alkali, hot water, and steam explosion pretreatment technologies. Detailed process models incorporating all unit operations in lignocellulosic ethanol plant with 250,000 metric ton biomass/ year processing capacity were developed in SuperPro Designer. The ethanol production cost were estimated from $0.81 to $0.88/ L of ethanol, and were found highly sensitive to biomass price, enzyme cost, and pentose sugar fermentation efficiency. Energy from lignin residue burning was found sufficient to meet the steam requirement in the production process. Third study performed the life cycle assessment for bioethanol production from grass straw considering various pretreatment technology options. The study revealed that ethanol production from grass straw provide environmental benefits compared to use of gasoline, with 57.43-112.67% reduction in fossil energy use to produce 10,000 MJ of fuel. The GHG emissions during life cycle of ethanol production were estimated in the range of -131 to -555.4 kg CO2 eq. per 10,000 MJ of fuel. It was observed that assumptions and allocation procedure used during the analysis had a significant effect on the LCA results. During the techno-economic assessment of bioethanol process, it was found that cost of cellulose enzymes was significant fraction of the total ethanol production cost. A comprehensive enzymatic hydrolysis model can play critical role in optimizing the enzyme composition and dosage, improving understanding of the process mechanism and reducing the cost of enzymes, a major bottleneck in the ethanol production process. A novel approach of stochastic molecular modeling, in which each hydrolysis event is translated into a discrete event, was used to develop a mechanistic model for cellulose hydrolysis in the fourth study. Cellulose structure was modeled as a group of microfibrils consisting of elementary fibrils bundles, where each elementary fibril was represented as a three dimensional matrix of glucose molecules. Major structural properties: crystallinity, degree of polymerization, surface accessibility, and enzyme characteristics: mode of action, binding and surface blockage, inhibition, along with the dynamic morphological changes in structure of cellulose were incorporated in the model. Hydrolysis of cellulose was simulated based on Monte Carlo simulation technique. Hydrolysis results predicted by model simulations had shown a good fit with the experimental data from hydrolysis of pure cellulose using purified enzymes for various hydrolysis conditions. The model was effective in capturing the dynamic behavior of cellulose hydrolysis during action of individual as well as multiple cellulases. Model was able to simulate and validate all the important expected experimental observations: effect of structural properties, enzyme inhibition and enzyme loadings on the hydrolysis and degree of synergism on different substrates. The work from this dissertation proved the significance of choosing technology options, drew a comparison among different pretreatment technologies, identified the critical processes and inputs that have significant effect on the ethanol production cost, net energy, and GHG emissions. Results from the last study confirmed the validity of using the stochastic molecular modeling approach to quantitatively and qualitatively describe the cellulose hydrolysis, which has wide potential application in bioethanol production research to reduce the enzyme cost.
Download or read book Fossil Energy Update written by and published by . This book was released on 1981 with total page 1002 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Biomass Fractionation Technologies for a Lignocellulosic Feedstock Based Biorefinery written by S.I. Mussatto and published by Elsevier. This book was released on 2016-02-18 with total page 676 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biomass Fractionation Technologies for a Lignocellulosic Feedstock-based Biorefinery reviews the extensive research and tremendous scientific and technological developments that have occurred in the area of biorefinering, including industrial processes and product development using ‘green technologies’, often referred as white biotechnology. As there is a huge need for new design concepts for modern biorefineries as an alternative and amendment to industrial crude oil and gas refineries, this book presents the most important topics related to biomass fractionation, including advances, challenges, and perspectives, all with references to current literature for further study. Presented in 26 chapters by international field specialists, each chapter consists of review text that comprises the most recent advances, challenges, and perspectives for each fractionation technique. The book is an indispensable reference for all professionals, students, and workers involved in biomass biorefinery, assisting them in establishing efficient and economically viable process technologies for biomass fractionation. Provides information on the most advanced and innovative pretreatment processes and technologies for biomass Reviews numerous valuable products from lignocellulose Discusses integration of processes for complete biomass conversion with minimum waste generation Identifies the research gaps in scale-up Presents an indispensable reference for all professionals, students, and workers involved in biomass biorefinery, assisting them in establishing efficient and economically viable process technologies for biomass fractionation
Download or read book Energy Research Abstracts written by and published by . This book was released on 1988 with total page 1198 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Solar Energy Update written by and published by . This book was released on 1984 with total page 680 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Energy and Water Development Appropriations for 2010 written by United States. Congress. House. Committee on Appropriations. Subcommittee on Energy and Water Development and published by . This book was released on 2009 with total page 1662 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Abstracts of Papers written by American Chemical Society. Meeting and published by . This book was released on 1979 with total page 1088 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Comparative Economic Assessment of Ethanol from Biomass written by Mitre Corporation. Metrek Division and published by . This book was released on 1978 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Pretreatment of Biomass written by Ashok Pandey and published by Academic Press. This book was released on 2014-09-18 with total page 273 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pretreatment of Biomass provides general information, basic data, and knowledge on one of the most promising renewable energy sources—biomass for their pretreatment—which is one of the most essential and critical aspects of biomass-based processes development. The quest to make the environment greener, less polluted, and less hazardous has led to the concept of biorefineries for developing bio-based processes and products using biomass as a feedstock. Each kind of biomass requires some kind of pretreatment to make it suitable for bioprocess. This book provides state-of-art information on the methods currently available for this. This book provides data-based scientific information on the most advanced and innovative pretreatment of lignocellulosic and algal biomass for further processing. Pretreatment of biomass is considered one of the most expensive steps in the overall processing in a biomass-to-biofuel program. With the strong advancement in developing lignocellulose biomass- and algal biomass-based biorefineries, global focus has been on developing pretreatment methods and technologies that are technically and economically feasible. This book provides a comprehensive overview of the latest developments in methods used for the pretreatment of biomass. An entire section is devoted to the methods and technologies of algal biomass due to the increasing global attention of its use. - Provides information on the most advanced and innovative pretreatament processes and technologies for biomass - Covers information on lignocellulosic and algal biomass to work on the principles of biorefinery - Useful for researchers intending to study scale-up - Provides information on integration of processes and technologies for the pretreatment of biomass
Download or read book Fuel Ethanol Production from Sugarcane written by Thalita Peixoto Basso and published by BoD – Books on Demand. This book was released on 2019-01-23 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a broad understanding of bioethanol production from sugarcane, although a few other substrates, except corn, will also be mentioned. The 10 chapters are grouped in five sections. The Fuel Ethanol Production from Sugarcane in Brazil section consists of two chapters dealing with the first-generation ethanol Brazilian industrial process. The Strategies for Sugarcane Bagasse Pretreatment section deals with emerging physicochemical methods for biomass pretreatment, and the non-conventional biomass source for lignocellulosic ethanol production addresses the potential of weed biomass as alternative feedstock. In the Recent Approaches for Increasing Fermentation Efficiency of Lignocellulosic Ethanol section, potential and research progress using thermophile bacteria and yeasts is presented, taking advantage of microorganisms involved in consolidating or simultaneous hydrolysis and fermentation processes. Finally, the Recent Advances in Ethanol Fermentation section presents the use of cold plasma and hydrostatic pressure to increase ethanol production efficiency. Also in this section the use of metabolic-engineered autotrophic cyanobacteria to produce ethanol from carbon dioxide is mentioned.
Download or read book Fuel from Farms written by Solar Energy Information Data Bank (U.S.) and published by . This book was released on 1980 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: Decision to produce; Markets and uses; Market assessment; Prodution potential; Equipment selection; Financial requirements; Decision and planning workssheets; Basic ethanol production; Preparation of feedstocks, Fermentation; Distillation; Types of feedstocks; Coproduct yields; Agronomic considerations; Plant design; Overall plant considerations; Process control; Representative ethanol plant; Maintenance checklist; Business plan; Analysis of financial requirements; Organizational form; Financing; Case study; Summary of legislation; Bureau of alcohol, tabacco, and firearms permit information; Enviromental considerations.
Download or read book Abstracts of Papers ACS CSJ Chemical Congress Honolulu Hawaii Apr 1 6 1979 written by and published by . This book was released on 1979 with total page 1044 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Application of Chemical Engineering written by Zhong Cao and published by Trans Tech Publications Ltd. This book was released on 2011-05-12 with total page 3200 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book aims to correlate the latest advances in, and applications of, biomass and resource utilization technology, energy chemical industry, biochemical industry, paper and fiber engineering, chemical process machinery, nano-biochemistry and nano-materials, medicine and biomedical engineering, etc. It will serve as a useful handbook guide to those fields. Volume is indexed by Thomson Reuters CPCI-S (WoS).
