Download or read book A Surface Performance graded SPG Specification for Surface Treatment Binders written by Lubinda F. Walubita and published by . This book was released on 2005 with total page 138 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presently, surface treatment design and material selection is based on traditional specifications and experience, which are not performance-based and sometimes result in inadequate performance of the surface treatment. In 2000 the first phase of a Texas Department of Transportation (TxDOT) research project developed a surface performance-graded (SPG) specification for the selection of surface treatment binders (Research Report 1710-1). The SPG specification is performance-based and utilizes binder properties directly related to surface treatment performance and associated distress. The specification takes into account environmental conditions, aging effects of the binder, visco-elastic behavior, and reliability. The objective of this second phase of the project was to investigate and establish the validity and applicability of the proposed SPG specification, make modifications where necessary, and, finally, recommend the SPG specification for practical implementation. The research methodology involved highway section identification, laboratory testing including SPG grading, performance monitoring, and comparison of the SPG binder grades to actual field performance. Factors included in the experimental design were binder type and suppliers, environment, aggregates, and traffic. Analyses of the results showed that there is generally a good correlation between the proposed SPG specification and actual field performance. Overall, the results are indicative that the SPG specification is functional and if properly applied, the specification promises to be a relatively cost-effective method for selecting binders to ensure adequate surface treatment performance. However, further validation is recommended, possibly with controlled test sections to fully investigate the effects of design, construction, and quality control processes and address some of the deficiencies of the specification.
Download or read book Transportation Research Record written by and published by . This book was released on 2004 with total page 784 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Manual for Emulsion based Chip Seals for Pavement Preservation written by Scott Shuler and published by Transportation Research Board. This book was released on 2011 with total page 111 pages. Available in PDF, EPUB and Kindle. Book excerpt: TRB's National Cooperative Highway Research Program (NCHRP) Report 680: Manual for Emulsion-Based Chip Seals for Pavement Preservation examines factors affecting chip performance, highlights design and construction considerations, and explores procedures for selecting the appropriate chip seal materials. The report also contains suggested test methods for use in the design and quality control of chip seals. Appendices A to J of NCHRP Report 680 provide further elaboration on the work performed in this project--
Download or read book Superpave Mix Design written by Asphalt Institute and published by . This book was released on 2001-01-01 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Basic Asphalt Emulsion Manual written by Asphalt Institute and published by . This book was released on 1979 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Environment Friendly Construction Materials written by Shaopeng Wu and published by MDPI. This book was released on 2019-06-20 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: Construction materials are the most widely used materials for civil infrastructure in our daily lives. However, from an environmental point of view, they consume a huge amount of natural resources and generate the majority of greenhouse gasses. Therefore, many new and novel technologies for designing environmentally friendly construction materials have been developed recently. This Special Issue, “Environment-Friendly Construction Materials”, has been proposed and organized as a means to present recent developments in the field of construction materials. It covers a wide range of selected topics on construction materials.
Download or read book Limit Analysis and Soil Plasticity written by Wai-Fah Chen and published by Elsevier. This book was released on 2013-07-10 with total page 653 pages. Available in PDF, EPUB and Kindle. Book excerpt: Developments in Geotechnical Engineering, Volume 7: Limit Analysis and Soil Plasticity covers the theory and applications of limit analysis as applied to soil mechanics. Organized into 12 chapters, the book presents an introduction to the modern development of theory of soil plasticity and includes rock-like material. The first four chapters of the book describe the technique of limit analysis, beginning with the historical review of the subject and the assumptions on which it is based, and then covering various aspects of available techniques of limit analysis. The subsequent chapters deal with the applications of limit analysis to what may be termed "classical soil mechanics problems that include bearing capacity of footings, lateral earth pressure problems, and stability of slopes. In many cases, comparisons of limit analysis solution and conventional limit equilibrium and slip-like solutions are also presented. Other chapters deal with the advances in bearing-capacity problem of concrete blocks or rock and present theoretical and experimental results of various concrete bearing problems. The concluding chapter examines elastic-plastic soil and elastic-plastic-fracture models for concrete materials. This book is an ideal resource text to geotechnical engineers and soil mechanics researchers.
Download or read book Chip Seal Best Practices written by Douglas D. Gransberg and published by Transportation Research Board. This book was released on 2005 with total page 120 pages. Available in PDF, EPUB and Kindle. Book excerpt: TRB's National Cooperative Highway Research Program (NCHRP) Synthesis 342: Chip Seal Best Practices examines ways to assist in the development and implementation of pavement preservation programs by identifying the benefits of using chip seal as part of a preventive maintenance program and by highlighting advanced chip seal programs in use around the world. The report includes approximately 40 best practices in the areas of chip seal design methods, contract administration, equipment practices, construction practices, and performance measures. According to the report, the increased use of chip seals for maintenance can be a successful, cost-effective way of using preventive maintenance to preserve both low-volume and higher-volume pavements.
Download or read book AASHTO Guide for Design of Pavement Structures 1993 written by American Association of State Highway and Transportation Officials and published by AASHTO. This book was released on 1993 with total page 622 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design related project level pavement management - Economic evaluation of alternative pavement design strategies - Reliability / - Pavement design procedures for new construction or reconstruction : Design requirements - Highway pavement structural design - Low-volume road design / - Pavement design procedures for rehabilitation of existing pavements : Rehabilitation concepts - Guides for field data collection - Rehabilitation methods other than overlay - Rehabilitation methods with overlays / - Mechanistic-empirical design procedures.
Download or read book Microsurfacing written by Douglas D. Gransberg and published by Transportation Research Board. This book was released on 2010 with total page 124 pages. Available in PDF, EPUB and Kindle. Book excerpt: TRB's National Cooperative Highway Research Program (NCHRP) Synthesis 411: Microsurfacing explores highway microsurfacing project selection, design, contracting, equipment, construction, and performance measurement processes used by transportation agencies in the United States and Canada. Microsurfacing is a polymer-modified cold-mix surface treatment that has the potential to address a broad range of problems on today's highways --
Download or read book Advanced Coating Materials written by Liang Li and published by John Wiley & Sons. This book was released on 2018-12-06 with total page 546 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a comprehensive, yet practical source of reference, and excellent foundation for comparing the properties and performance of coatings and selecting the most suitable materials based on specific service needs and environmental factors. Coating technology has developed significant techniques for protecting existing infrastructure from corrosion and erosion, maintaining and enhancing the performance of equipment, and provided novel functions such as smart coatings greatly benefiting the medical device, energy, automotive and construction industries. The mechanisms, usage, and manipulation of cutting-edge coating methods are the focus of this book. Not only are the working mechanisms of coating materials explored in great detail, but also craft designs for further optimization of more uniform, safe, stable, and scalable coatings. A group of leading experts in different coating technologies demonstrate their main applications, identify the key bottlenecks, and outline future prospects. Advanced Coating Materials broadly covers the coating techniques, including cold spray, plasma vapor deposition, chemical vapor deposition, sol–gel method, etc., and their significant applications in microreactor technology, super(de)wetting, joint implants, electrocatalyst, etc. Numerous kinds of coating structures are addressed, including nanosize particles, biomimicry structures, metals and complexed materials, along with the environmental and human compatible biopolymers resulting from microbial activities. This state-of-the-art book is divided into three parts: (1) Materials and Methods: Design and Fabrication, (2) Coating Materials: Nanotechnology, and (3) Advanced Coating Technology and Applications.
Download or read book Chemical Rocket Propulsion written by Luigi T. De Luca and published by Springer. This book was released on 2016-08-19 with total page 1069 pages. Available in PDF, EPUB and Kindle. Book excerpt: Developed and expanded from the work presented at the New Energetic Materials and Propulsion Techniques for Space Exploration workshop in June 2014, this book contains new scientific results, up-to-date reviews, and inspiring perspectives in a number of areas related to the energetic aspects of chemical rocket propulsion. This collection covers the entire life of energetic materials from their conceptual formulation to practical manufacturing; it includes coverage of theoretical and experimental ballistics, performance properties, as well as laboratory-scale and full system-scale, handling, hazards, environment, ageing, and disposal. Chemical Rocket Propulsion is a unique work, where a selection of accomplished experts from the pioneering era of space propulsion and current technologists from the most advanced international laboratories discuss the future of chemical rocket propulsion for access to, and exploration of, space. It will be of interest to both postgraduate and final-year undergraduate students in aerospace engineering, and practicing aeronautical engineers and designers, especially those with an interest in propulsion, as well as researchers in energetic materials.
Download or read book Ground Improvement Third Edition written by Klaus Kirsch and published by CRC Press. This book was released on 2012-11-26 with total page 515 pages. Available in PDF, EPUB and Kindle. Book excerpt: When finding another location, redesigning a structure, or removing troublesome ground at a project site are not practical options, prevailing ground conditions must be addressed. Improving the ground—modifying its existing physical properties to enable effective, economic, and safe construction—to achieve appropriate engineering performance is an increasingly successful approach. This third edition of Ground Improvement provides a comprehensive overview of the major ground improvement techniques in use worldwide today. Written by recognized experts who bring a wealth of knowledge and experience to bear on their contributions, the chapters are fully updated with recent developments including advancements in equipment and methods since the last edition. The text provides an overview of the processes and the key geotechnical and design considerations as well as equipment needed for successful execution. The methods described are well illustrated with relevant case histories and include the following approaches: Densification using deep vibro techniques or dynamic compaction Consolidation employing deep fabricated drains and associated methods Injection techniques, such as permeation and jet grouting, soil fracture grouting, and compaction grouting New in-situ soil mixing processes, including trench-mixing TRD and panel-mixing CSM approaches The introductory chapter touches on the historical development, health and safety, greenhouse gas emissions, and two less common techniques: blasting and the only reversible process, ground freezing. This practical and established guide provides readers with a solid basis for understanding and further study of the most widely used processes for ground improvement. It is particularly relevant for civil and geotechnical engineers as well as contractors involved in piling and ground engineering of any kind. It would also be useful for advanced graduate and postgraduate civil engineering and geotechnical students.
Download or read book Linux Dictionary written by Binh Nguyen and published by Binh Nguyen. This book was released on with total page 1761 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document is designed to be a resource for those Linux users wishing to seek clarification on Linux/UNIX/POSIX related terms and jargon. At approximately 24000 definitions and two thousand pages it is one of the largest Linux related dictionaries currently available. Due to the rapid rate at which new terms are being created it has been decided that this will be an active project. We welcome input into the content of this document. At this moment in time half yearly updates are being envisaged. Please note that if you wish to find a 'Computer Dictionary' then see the 'Computer Dictionary Project' at http://computerdictionary.tsf.org.za/ Searchable databases exist at locations such as: http://www.swpearl.com/eng/scripts/dictionary/ (SWP) Sun Wah-PearL Linux Training and Development Centre is a centre of the Hong Kong Polytechnic University, established in 2000. Presently SWP is delivering professional grade Linux and related Open Source Software (OSS) technology training and consultant service in Hong Kong. SWP has an ambitious aim to promote the use of Linux and related Open Source Software (OSS) and Standards. The vendor independent positioning of SWP has been very well perceived by the market. Throughout the last couple of years, SWP becomes the Top Leading OSS training and service provider in Hong Kong. http://www.geona.com/dictionary?b= Geona, operated by Gold Vision Communications, is a new powerful search engine and internet directory, delivering quick and relevant results on almost any topic or subject you can imagine. The term "Geona" is an Italian and Hebrew name, meaning wisdom, exaltation, pride or majesty. We use our own database of spidered web sites and the Open Directory database, the same database which powers the core directory services for the Web's largest and most popular search engines and portals. Geona is spidering all domains listed in the non-adult part of the Open Directory and millions of additional sites of general interest to maintain a fulltext index of highly relevant web sites. http://www.linuxdig.com/documents/dictionary.php LINUXDIG.COM, "Yours News and Resource Site", LinuxDig.com was started in May 2001 as a hobby site with the original intention of getting the RFC's online and becoming an Open Source software link/download site. But since that time the site has evolved to become a RFC distribution site, linux news site and a locally written technology news site (with bad grammer :)) with focus on Linux while also containing articles about anything and everything we find interesting in the computer world. LinuxDig.Com contains about 20,000 documents and this number is growing everyday! http://linux.about.com/library/glossary/blglossary.htm Each month more than 20 million people visit About.com. Whether it be home repair and decorating ideas, recipes, movie trailers, or car buying tips, our Guides offer practical advice and solutions for every day life. Wherever you land on the new About.com, you'll find other content that is relevant to your interests. If you're looking for "How To" advice on planning to re-finish your deck, we'll also show you the tools you need to get the job done. If you've been to About before, we'll show you the latest updates, so you don't see the same thing twice. No matter where you are on About.com, or how you got here, you'll always find content that is relevant to your needs. Should you wish to possess your own localised searcheable version please make use of the available "dict", http://www.dict.org/ version at the Linux Documentation Project home page, http://www.tldp.org/ The author has decided to leave it up to readers to determine how to install and run it on their specific systems. An alternative form of the dictionary is available at: http://elibrary.fultus.com/covers/technical/linux/guides/Linux-Dictionary/cover.html Fultus Corporation helps writers and companies to publish, promote, market, and sell books and eBooks. Fultus combines traditional self-publishing practices with modern technology to produce paperback and hardcover print-on-demand (POD) books and electronic books (eBooks). Fultus publishes works (fiction, non-fiction, science fiction, mystery, ...) by both published and unpublished authors. We enable you to self-publish easily and cost-effectively, creating your book as a print-ready paperback or hardcover POD book or as an electronic book (eBook) in multiple eBook's formats. You retain all rights to your work. We provide distribution to bookstores worldwide. And all at a fraction of the cost of traditional publishing. We also offer corporate publishing solutions that enable businesses to produce and deliver manuals and documentation more efficiently and economically. Our use of electronic delivery and print-on-demand technologies reduces printed inventory and saves time. Please inform the author as to whether you would like to create a database or an alternative form of the dictionary so that he can include you in this list. Also note that the author considers breaches of copyright to be extremely serious. He will pursue all claims to the fullest extent of the law.
Download or read book Proceedings of the 28th International Symposium on Mine Planning and Equipment Selection MPES 2019 written by Erkan Topal and published by Springer Nature. This book was released on 2019-11-29 with total page 515 pages. Available in PDF, EPUB and Kindle. Book excerpt: This conference proceedings presents the research papers in the field of mine planning and mining equipment including themes such as mine automation, rock mechanics, drilling, blasting, tunnelling and excavation engineering. The papers presents the recent advancement and the application of a range of technologies in the field of mining industry. It is of interest to the professionals who practice in mineral industry including but not limited to engineers, consultants, managers, academics, scientist, and government staff.
Download or read book Geotechnical Characterization and Modelling written by Madhavi Latha Gali and published by Springer Nature. This book was released on 2020-09-18 with total page 1098 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume comprises select papers presented during the Indian Geotechnical Conference 2018, discussing issues and challenges relating to the characterization of geomaterials, modelling approaches, and geotechnical engineering education. With a combination of field studies, laboratory experiments and modelling approaches, the chapters in this volume address some of the most widely investigated geotechnical engineering topics. This volume will be of interest to researchers and practitioners alike.
Download or read book Quality Systems and Standards for a Competitive Edge written by and published by World Bank Publications. This book was released on 2007 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book responds to the challenge of providing a comprehensive account of quality systems for private sector development: what works and what doesnt on the ground, and why. This volume provides a thorough analysis of the diversity of institutions, linkages, and arrangements involved in quality systems, identifying success factors in countries quality strategies. It explains why quality and standards matter for export growth, for productivity, for industrial upgrading, and for diffusion of innovation, all central ingredients in improving economic growth and generating real gains in poverty reduction. It provides a detailed blue print for implementing effective National Quality Systems. Quality and Standards Matter is a valuable tool for policymakers confronted with the challenges of building trade competitiveness in the new global economy.
