Download or read book Handbook of Hydraulic Resistance written by I. E. Idelchik and published by . This book was released on 2005 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The handbook has been composed on the basis of processing, systematization and classification of the results of a great number of investigations published at different time. The essential part of the book is the outcome of investigations carried out by the author. The present edition of this handbook should assist in increasing the quality and efficiency of the design and usage of indutrial power engineering and other constructions and also of the devices and apparatus through which liquids and gases move.
Download or read book Mechanical Measurements written by S. P. Venkateshan and published by John Wiley & Sons. This book was released on 2015-03-31 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first edition of this book was co-published by Ane Books India, and CRC Press in 2008. This second edition is an enlarged version of the web course developed by the author at IIT Madras, and also a modified and augmented version of the earlier book. Major additions/modifications presented are in the treatment of errors in measurement, temperature measurement, measurement of thermo-physical properties, and data manipulation. Many new worked examples have been introduced in this new and updated second edition.
Download or read book Essentials of Heat Transfer written by Massoud Kaviany and published by Cambridge University Press. This book was released on 2011-08 with total page 749 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a modern, example-driven introductory textbook on heat transfer, with modern applications, written by a renowned scholar.
Download or read book Impingement Jet Cooling in Gas Turbines written by R.S. Amano and published by WIT Press. This book was released on 2014-05-28 with total page 253 pages. Available in PDF, EPUB and Kindle. Book excerpt: Due to the requirement for enhanced cooling technologies on modern gas turbine engines, advanced research and development has had to take place in field of thermal engineering. Among the gas turbine cooling technologies, impingement jet cooling is one of the most effective in terms of cooling effectiveness, manufacturability and cost. The chapters contained in this book describe research on state-of-the-art and advanced cooling technologies that have been developed, or that are being researched, with a variety of approaches from theoretical, experimental, and CFD studies. The authors of the chapters have been selected from some of the most active researchers and scientists on the subject. This is the first to book published on the topics of gas turbines and heat transfer to focus on impingement cooling alone.
Download or read book Heat Transfer in Polymer Composite Materials written by Nicolas Boyard and published by John Wiley & Sons. This book was released on 2016-03-28 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses general information, good practices and examples about thermo-physical properties, thermo-kinetic and thermo-mechanical couplings, instrumentation in thermal science, thermal optimization and infrared radiation.
Download or read book Translational Research in Cardio Oncology An Issue of Heart Failure Clinics written by Ragavendra R. Baliga and published by Elsevier Health Sciences. This book was released on 2022-06-23 with total page 217 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this issue of Heart Failure Clinics, guest editors Drs. Ragavendra R Baliga and George A. Mensah bring their considerable expertise to the topic of Translational Research in Cardio-Oncology. Top experts in the field cover key topics such as radiation-induced cardiac dysfunction; training and career development; cardiovascular imaging; CAR-T cell therapy and cardiovascular disease; and more. - Contains 12 relevant, practice-oriented topics including cardio-protection of high-risk individuals; myocardial metabolism; amyloidosis; arrhythmic complications associated with cancer therapies; and more. - Provides in-depth clinical reviews on translational research in cardio-oncology, offering actionable insights for clinical practice. - Presents the latest information on this timely, focused topic under the leadership of experienced editors in the field. Authors synthesize and distill the latest research and practice guidelines to create clinically significant, topic-based reviews.
Download or read book Computational Fluid Dynamics and Heat Transfer written by Ryoichi Amano and published by WIT Press. This book was released on 2011 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heat transfer and fluid flow issues are of great significance and this state-of-the-art edited book with reference to new and innovative numerical methods will make a contribution for researchers in academia and research organizations, as well as industrial scientists and college students. The book provides comprehensive chapters on research and developments in emerging topics in computational methods, e.g., the finite volume method, finite element method as well as turbulent flow computational methods. Fundamentals of the numerical methods, comparison of various higher-order schemes for convection-diffusion terms, turbulence modeling, the pressure-velocity coupling, mesh generation and the handling of arbitrary geometries are presented. Results from engineering applications are provided. Chapters have been co-authored by eminent researchers.
Download or read book Fundamental Principles of Heat Transfer written by Stephen Whitaker and published by Elsevier. This book was released on 2013-10-22 with total page 575 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamental Principles of Heat Transfer introduces the fundamental concepts of heat transfer: conduction, convection, and radiation. It presents theoretical developments and example and design problems and illustrates the practical applications of fundamental principles. The chapters in this book cover various topics such as one-dimensional and transient heat conduction, energy and turbulent transport, forced convection, thermal radiation, and radiant energy exchange. There are example problems and solutions at the end of every chapter dealing with design problems. This book is a valuable introductory course in heat transfer for engineering students.
Download or read book Tackling Turbulent Flows in Engineering written by Anupam Dewan and published by Springer Science & Business Media. This book was released on 2010-10-23 with total page 129 pages. Available in PDF, EPUB and Kindle. Book excerpt: The emphasis of this book is on engineering aspects of fluid turbulence. The book explains for example how to tackle turbulence in industrial applications. It is useful to several disciplines, such as, mechanical, civil, chemical, aerospace engineers and also to professors, researchers, beginners, under graduates and post graduates. The following issues are emphasized in the book: - Modeling and computations of engineering flows: The author discusses in detail the quantities of interest for engineering turbulent flows and how to select an appropriate turbulence model; Also, a treatment of the selection of appropriate boundary conditions for the CFD simulations is given. - Modeling of turbulent convective heat transfer: This is encountered in several practical situations. It basically needs discussion on issues of treatment of walls and turbulent heat fluxes. - Modeling of buoyancy driven flows, for example, smoke issuing from chimney, pollutant discharge into water bodies, etc
Download or read book Advances in Heat Transfer written by and published by Academic Press. This book was released on 1998-05-18 with total page 467 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Heat Transfer
Download or read book Two phase Pressure Drops written by Herbert Stanford Isbin and published by . This book was released on 1954 with total page 100 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Heat Transfer and Fluid Flow in Minichannels and Microchannels written by Satish Kandlikar and published by Elsevier. This book was released on 2006 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: &Quot;This book explores flow through passages with hydraulic diameters from about 1 [mu]m to 3 mm, covering the range of minichannels and microchannels. Design equations along with solved examples and practice problems are also included to serve the needs of practicing engineers and students in a graduate course."--BOOK JACKET.
Download or read book Ventilation of Buildings written by H.B. Awbi and published by Routledge. This book was released on 2004-06-02 with total page 537 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hazim Awbi's Ventilation of Buildings has become established as the definitive text on the subject. This new, thoroughly revised, edition builds on the basic principles of the original text drawing in the results of considerable new research in the field. A new chapter on natural ventilation is also added and recent developments in ventilation concepts and room air distribution are also considered. The text is intended for the practitioner in the building services industry, the architect, the postgraduate student undertaking courses or research in HVAC, building services engineering, or building environmental engineering, and the undergraduate studying building services as a major subject. Readers are assumed to be familiar with the basic principles of fluid flow and heat transfer and some of the material requires more advanced knowledge of partial differential equations which describe the turbulent flow and heat transfer processes of fluids. The book is both a presentation of the practical issues that are needed for modern ventilation system design and a survey of recent developments in the subject
Download or read book Icing Cloud Calibration of the NASA Glenn Icing Research Tunnel written by Robert F. Ide and published by . This book was released on 2001 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt: The icing research tunnel at the NASA Glenn Research Center underwent a major rehabilitation in 1999, necessitating recalibration of the icing clouds. This report describes the methods used in the recalibration, including the procedure used to establish a uniform icing cloud and the use of a standard icing blade technique for measurement of liquid water content. The instruments and methods used to perform the droplet size calibration are also described. The liquid water content/droplet size operating envelopes of the icing tunnel are shown for a range of airspeeds and compared to the FAA icing certification criteria. The capabilities of the IRT to produce large droplet icing clouds is also detailed.
Download or read book Fundamentals of Heat Exchanger Design written by Ramesh K. Shah and published by John Wiley & Sons. This book was released on 2003-08-11 with total page 978 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive and unique source integrates the material usually distributed among a half a dozen sources. * Presents a unified approach to modeling of new designs and develops the skills for complex engineering analysis. * Provides industrial insight to the applications of the basic theory developed.
Download or read book The Blind Man s Garden written by Nadeem Aslam and published by Random House India. This book was released on 2013-02-08 with total page 347 pages. Available in PDF, EPUB and Kindle. Book excerpt: ‘Love is not consolation, it is light’ From the author of Maps for Lost Lovers and The Wasted Vigil comes a novel set in the months after 9/11, when Western armies invaded Afghanistan—a story of love, hope and grief, of uncorrupted faith and of what it means to be alive. Jeo and his foster-brother Mikal leave their home in Pakistan to help care for wounded Afghans. Within hours of entering the wide-horizoned Afghan landscape, Mikal and Jeo are separated and, emerging from the carnage, Mikal begins his search for Jeo. But his deepest wish is to return home—to the young woman he loves and who loves him, Jeo’s wife. The Blind Man’s Garden maps a place both phantasmally beautiful and chilling. Taking us on a journey from Al Qaeda’s hideouts in Waziristan and American-built military prisons to a family left behind—Mikal’s and Jeo’s blind, regretful father, Jeo’s resolute wife and her superstitious mother—it unflinchingly examines war and brotherhood, devastation, separation and remorse, while celebrating the redemptive power of nature, art and literature.
Download or read book Axial Turbine Aerodynamics for Aero engines written by Zhengping Zou and published by Springer. This book was released on 2018-01-11 with total page 572 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a monograph on aerodynamics of aero-engine gas turbines focusing on the new progresses on flow mechanism and design methods in the recent 20 years. Starting with basic principles in aerodynamics and thermodynamics, this book systematically expounds the recent research on mechanisms of flows in axial gas turbines, including high pressure and low pressure turbines, inter-turbine ducts and turbine rear frame ducts, and introduces the classical and innovative numerical evaluation methods in different dimensions. This book also summarizes the latest research achievements in the field of gas turbine aerodynamic design and flow control, and the multidisciplinary conjugate problems involved with gas turbines. This book should be helpful for scientific and technical staffs, college teachers, graduate students, and senior college students, who are involved in research and design of gas turbines.
