Download or read book Engineering Index written by and published by . This book was released on 1965 with total page 558 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Structure and Properties of Wood Polymer Composites WPC written by Alexander Askadskii and published by Cambridge Scholars Publishing. This book was released on 2019-03-05 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: At present, the use of polymer composites filled with wood (WPC) is becoming increasingly popular. In particular, flooring of terraced premises, siding, decorative fences, fence systems, steps, universal profiles, among others are made from WPC. In 1977, the first enterprise for the production of WPC appeared in Sweden. The first experience was not very successful – the demand turned out to be low, and the wear of technological equipment was very high. Therefore, developments in this field were resumed only in the 1990s and continue to this day. This book describes the basic physical and mechanical properties of modern WPC, such as tensile and compression strength, and hardness. Also, the influence of climatic factors on the performance properties of products from WPC is described, while the thermal and rheological properties of WPC materials are considered, which directly affect the consumer characteristics of the products. The book contains theoretical developments related to the prediction of the mechanical and thermal properties of polymers and composites. The Van der Waals volume and the energy of the intermolecular interaction are estimated. This book will be of interest to representatives of the WPC market, designers, and architects, as well as technology engineers, students and post-graduate students of higher educational institutions in the fields of chemistry and physics of composite polymer materials.

Download or read book Technology of Pvc Compounding and Its Applications written by and published by Engineers India Research In. This book was released on 2007 with total page 9 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Book Cover Pvc Resins Manufacture & Properties, Processing Of Pvc, Additives For Pvc, Compounding, Compounding Of Pvc, Compounding Of Pvc Pastes, Testing Of Resins And Compounds, Speciality Plastic Compounds & Masterbatches, Pvc Compounds, Xlpe Cable Compound, Jelly Filled Telecommunication Cable Compound & Sheating Compound, Plastic Granules From Fresh Resin, Plastic Granules, Applications Of Pvc, Recycling Of Pvc, Suppliers Of Plant Machineries And Raw Materials Etc.

Download or read book Hot and Cold Water Supply written by BSI (The British Standards Institution) and published by John Wiley & Sons. This book was released on 2008-04-15 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a highly illustrated guide to the design, installation and maintenance of hot and cold water supply systems for domestic buildings. Based on British Standard BS 6700, the new edition takes into account revisions to the standard since the book was first published in 1991. It has also been updated to give guidance on the 1999 Water Supply Regulations and includes revisions to the Building Regulations. Written for designers and installers, this immensely practical book will also be of interest to technical staff of water undertakers, property services managers and students of NVQ and BTech courses. It was specially commissioned by the British Standards Institution and written for BSI by Bob Garrett, formerly of Langley College of Further Education and past President of the National Association of Plumbing Teachers.

Download or read book Extrusion written by Harold F. Giles Jr and published by William Andrew. This book was released on 2013-09-21 with total page 638 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of Extrusion is designed to aid operators, engineers, and managers in extrusion processing in quickly answering practical day-to-day questions. The first part of the book provides the fundamental principles, for operators and engineers, of polymeric materials extrusion processing in single and twin screw extruders. The next section covers advanced topics including troubleshooting, auxiliary equipment, and coextrusion for operators, engineers, and managers. The final part provides applications case studies in key areas for engineers such as compounding, blown film, extrusion blow molding, coating, foam, and reprocessing. This practical guide to extrusion brings together both equipment and materials processing aspects. It covers basic and advanced topics, for reference and training, in thermoplastics processing in the extruder. Detailed reference data are provided on such important operating conditions as temperatures, start-up procedures, shear rates, pressure drops, and safety. - A practical guide to the selection, design and optimization of extrusion processes and equipment - Designed to improve production efficiency and product quality - Focuses on practical fault analysis and troubleshooting techniques

Download or read book Plastics in Medical Devices written by Vinny R. Sastri and published by Elsevier. This book was released on 2010-03-05 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: No book has been published that gives a detailed description of all the types of plastic materials used in medical devices, the unique requirements that the materials need to comply with and the ways standard plastics can be modified to meet such needs. This book will start with an introduction to medical devices, their classification and some of the regulations (both US and global) that affect their design, production and sale. A couple of chapters will focus on all the requirements that plastics need to meet for medical device applications. The subsequent chapters describe the various types of plastic materials, their properties profiles, the advantages and disadvantages for medical device applications, the techniques by which their properties can be enhanced, and real-world examples of their use. Comparative tables will allow readers to find the right classes of materials suitable for their applications or new product development needs.

Download or read book Frontiers in the Science and Technology of Polymer Recycling written by Güneri Akovali and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 477 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymers, main components of plastics and rubbers, are being discarded in increasing quantities. But this waste can also be considered as `plastic gold'. Public concern, coupled with the inherent value of the material, means that recycling is imperative. The present book presents a survey of current knowledge in the form of case studies, including current legal and educational issues. Topics covered also include regulation and practice in NATO countries, the economics of recycling, the reprocessing of single polymers and mixtures, and future prospects and strategies. Audience: Vital reading for all polymer scientists, technicians and engineers.

Download or read book Handbook on Pressurized Irrigation Techniques written by Andreas Phocaides and published by Food & Agriculture Org.. This book was released on 2007 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: Increasing the efficiency of water use and enhancing agricultural water productivity at all levels of the production chains are becoming priorities in a growing number of countries. In particular, shifting to modern on-farm irrigation practices can contribute to a substantial increase in both water use efficiency and water productivity. The objective of this handbook is to provide a practical guide on the use of pressurized irrigation techniques to farmers, irrigation technicians, and extension workers in the field. In this second edition, the handbook has been considerably revised, including new chapters on low-cost drip irrigation and pipe distribution systems for smallholders.--Publisher's description.

Download or read book PVC Handbook written by Charles E. Wilkes and published by Hanser Gardner Publications. This book was released on 2005 with total page 723 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this single handbook, the editors aim to give a diverse audience of readers a complete account of all aspects of PVC--from monomer manufacture to polymerization; the gamut of such additives as stabilizers, lubricants, plasticizers, impact modifiers, fillers and reinforcing agents; blends and alloys; compounding and processing; characterization; combustion resistance and weatherability; product engineering design; applications; environmental and safety; and finally the PVC industry dynamics. This handbook contains both practical formulation information as well as a mechanistic view of why PVC behaves as it does.

Download or read book Microbial Growth in Drinking Water Supplies written by Dick van der Kooij and published by IWA Publishing. This book was released on 2013-09-14 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt: Maintaining the microbial quality in distribution systems and connected installations remains a challenge for the water supply companies all over the world, despite many years of research. This book identifies the main concerns and knowledge gaps related to regrowth and stimulates cooperation in future research. Microbial Growth in Drinking Water Supplies provides an overview of the regrowth issue in different countries and the water quality problems related to regrowth. The book assesses the causes of regrowth in drinking water and the prevention of regrowth by water treatment and distribution. Editors: Dirk van der Kooij and Paul W.J.J. van der Wielen, KWR Watercycle Research Institute, The Netherlands

Download or read book Building Adaptation written by James Douglas and published by Routledge. This book was released on 2006-08-11 with total page 680 pages. Available in PDF, EPUB and Kindle. Book excerpt: As existing buildings age, nearly half of all construction activity in Britain is related to maintenance, refurbishment and conversions. Building adaptation is an activity that continues to make a significant contribution to the workload of the construction industry. Given its importance to sustainable construction, the proportion of adaptation works in relation to new build is likely to remain substantial for the foreseeable future, especially in the developed parts of the world. Building Adaptation, Second Edition is intended as a primer on the physical changes that can affect older properties. It demonstrates the general principles, techniques, and processes needed when existing buildings must undergo alteration, conversion, extension, improvement, or refurbishment. The publication of the first edition of Building Adaptation reflected the upsurge in refurbishment work. The book quickly established itself as one of the core texts for building surveying students and others on undergraduate and postgraduate built environment courses. This new edition continues to provide a comprehensive introduction to all the key issues relating to the adaptation of buildings. It deals with any work to a building over and above maintenance to change its capacity, function or performance.

Download or read book Permeability Properties of Plastics and Elastomers written by Laurence W. McKeen and published by William Andrew. This book was released on 2011-09-08 with total page 357 pages. Available in PDF, EPUB and Kindle. Book excerpt: Permeability properties are essential data for the selection of materials and design of products across a broad range of market sectors from food packaging to Automotive applications to Medical Devices. This unique handbook brings together a wealth of permeability data in a form that enables quick like-for-like comparisons between materials. The data is supported by a full explanation of its interpretation, and an introduction to the engineering aspects of permeability in polymers. The third edition includes expanded explanatory text which makes the book accessible to novices as well as experienced engineers, written by industry insider and author Larry McKeen (DuPont), and 20% new data and major new explanatory text sections to aid in the interpretation and application of the data. - A unique collection of permeability data designed to enable quick like-for-like comparisons between different materials - Third edition includes 20% new data and expanded explanatory text, which makes the book accessible to novices as well as experienced engineers - Essential reference for materials engineers, design engineers and applications engineers across sectors including packaging, automotive and medical devices

Download or read book Engineering Materials 2 written by Michael F. Ashby and published by Elsevier. This book was released on 2014-06-28 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a thorough explanation of the basic properties of materials; of how these can be controlled by processing; of how materials are formed, joined and finished; and of the chain of reasoning that leads to a successful choice of material for a particular application. The materials covered are grouped into four classes: metals, ceramics, polymers and composites. Each class is studied in turn, identifying the families of materials in the class, the microstructural features, the processes or treatments used to obtain a particular structure and their design applications. The text is supplemented by practical case studies and example problems with answers, and a valuable programmed learning course on phase diagrams.

Download or read book PVC Technology written by W. V. Titow and published by . This book was released on 1984 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Modern Plastics written by and published by . This book was released on 1962 with total page 1662 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Health Aspects of Plumbing written by World Health Organization and published by World Health Organization. This book was released on 2006-03-03 with total page 139 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication describes the processes involved in the design installation and maintenance of modern plumbing systems. It recommends a number of plumbing system design and installation specifications that have demonstrated their validity from years of experience. It also examines the microbiological chemical physical and financial risks associated with plumbing and outlines the major risk management strategies that are used in the plumbing industry and emphasizes the importance of measures to conserve supplies of clean water. This work is dedicated to assisting developing countries in achieving the best possible plumbing levels to ensure the highest health benefits from use of sound plumbing practices. It is aimed at administrators and plumbers working in areas that are served by a mains drinking- water supply or sewerage system or are about to install a mains drinking- water supply or sewerage system. It should be of particular value to those working in countries or areas that are in the early stages of introducing modern plumbing systems. While it draws attention to the problems of drinking- water supply and waste removal in developing countries and outlines some of the strategies currently used it does not systematically cover issues specific to developing countries.

Download or read book Rural Water Supply in Africa written by Peter Harvey and published by WEDC, Loughborough University. This book was released on 2004 with total page 23 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is designed to assist those responsible for planning, implementing and supporting rural water supply prograames to increase sustainability.