Download or read book A Study of the Massachusetts Wood Using Industries Classic Reprint written by Hugh Maxwell and published by . This book was released on 2015-08-05 with total page 44 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from A Study of the Massachusetts Wood-Using Industries The Bureau of the Census, in co-operation with the United States Forest Service, compiles and publishes statistics annually, showing the output of sawmills by States and for the whole country. The cut in Massachusetts in 1908 was 384,526,000 feet B. M., reported by 610 sawmills. This did not include pulpwood, tanbark, tanning extracts, cross-ties, telegraph and telephone poles, or cooperage and veneer stocks. After lumber leaves the sawmill it serves many purposes. Some of it passes through no further process of manufacture, but goes into buildings with only the cutting and fitting which carpenters give it. Another part is further manufactured before it is used. Woodworking machines of many kinds change its form, and it is cut, joined and fitted by skilled labor, becoming, partly or wholly, a finished product, - boxes, frames, doors, sash, vehicles, boats, shuttles, spools, lasts, baskets, musical instruments, furniture, handles, toys, brushes and many more. This study has to do with that part of lumber only which undergoes further process of manufacture after it leaves the sawmill. Heretofore, lumber has not been very carefully followed after it leaves the saw, to ascertain what becomes of it, what is made of it, and into what commodities it enters. In a general way it has been known that some of it is used in its rough form, and some passes through further process of manufacture. The present study of the wood-manufacturing industries of Massachusetts was undertaken to supply information concerning the lumber which is not used in its rough form. The work has been done in co-operation by the United States Forest Service and the State of Massachusetts. Industries which manufacture commodities wholly or partly of wood were asked to furnish data along their special lines, and this report is based on their replies, supplemented by independent investigations throughout the State. Statistics thus collected and published are expected to be useful to both growers and manufacturers of wood. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Download or read book George Elton Mayo written by John Cunningham Wood and published by Taylor & Francis. This book was released on 2004 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Carriage Trade written by Thomas A. Kinney and published by JHU Press. This book was released on 2004-10-13 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt: Co-Winner of the 2005 Hagley Business History Book Prize given by the Busines History Conference. In 1926, the Carriage Builders' National Association met for the last time, signaling the automobile's final triumph over the horse-drawn carriage. Only a decade earlier, carriages and wagons were still a common sight on every Main Street in America. In the previous century, carriage-building had been one of the largest and most dynamic industries in the country. In this sweeping study of a forgotten trade, Thomas A. Kinney extends our understanding of nineteenth-century American industrialization far beyond the steel mill and railroad. The legendary Studebaker Brothers Manufacturing Company in 1880 produced a hundred wagons a day—one every six minutes. Across the country, smaller factories fashioned vast quantities of buggies, farm wagons, and luxury carriages. Today, if we think of carriage and wagon at all, we assume it merely foreshadowed the automobile industry. Yet., the carriage industry epitomized a batch-work approach to production that flourished for decades. Contradicting the model of industrial development in which hand tools, small firms, and individual craftsmanship simply gave way to mechanized factories, the carriage industry successfully employed small-scale business and manufacturing practices throughout its history. The Carriage Trade traces the rise and fall of this heterogeneous industry, from the pre-industrial shop system to the coming of the automobile, using as case studies Studebaker, the New York–based luxury carriage-maker Brewsters, and dozens of smallerfirms from around the country. Kinney also explores the experiences of the carriage and wagon worker over the life of the industry. Deeply researched and strikingly original, this study contributes a vivid chapter to the story of America's industrial revolution.
Download or read book Monthly Labor Review written by and published by . This book was released on 1986 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt: Publishes in-depth articles on labor subjects, current labor statistics, information about current labor contracts, and book reviews.
Download or read book Economics Selections written by and published by . This book was released on 1972 with total page 718 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book International Handbook of Middle Level Education Theory Research and Policy written by David C. Virtue and published by Routledge. This book was released on 2019-08-30 with total page 431 pages. Available in PDF, EPUB and Kindle. Book excerpt: The International Handbook of Middle Level Education Theory, Research, and Policy is a landmark resource for researchers, graduate students, policy makers, and practitioners who work in middle level education and associated fields of study. The volume provides an overview of the current state of middle level education theory, research, and policy; offers analysis and critique of the extant literature in the field; and maps new directions for research and theory development in middle level education. The handbook meets a pressing need in the field for a resource that is comprehensive in its treatment of middle level research and international in scope. Chapter authors provide rationales for middle level education research and definitions of the field; discuss philosophical approaches and underpinnings for middle level education research; describe and critique frameworks for quality in middle level education; review research about young adolescent learners, middle level school programming, and educator preparation; and analyze public policies affecting middle level education at national, regional, and local levels.
Download or read book Lees Loss Prevention in the Process Industries written by Frank Lees and published by Elsevier. This book was released on 2005-01-25 with total page 3708 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the last three decades the process industries have grown very rapidly, with corresponding increases in the quantities of hazardous materials in process, storage or transport. Plants have become larger and are often situated in or close to densely populated areas. Increased hazard of loss of life or property is continually highlighted with incidents such as Flixborough, Bhopal, Chernobyl, Three Mile Island, the Phillips 66 incident, and Piper Alpha to name but a few. The field of Loss Prevention is, and continues to, be of supreme importance to countless companies, municipalities and governments around the world, because of the trend for processing plants to become larger and often be situated in or close to densely populated areas, thus increasing the hazard of loss of life or property. This book is a detailed guidebook to defending against these, and many other, hazards. It could without exaggeration be referred to as the "bible" for the process industries. This is THE standard reference work for chemical and process engineering safety professionals. For years, it has been the most complete collection of information on the theory, practice, design elements, equipment, regulations and laws covering the field of process safety. An entire library of alternative books (and cross-referencing systems) would be needed to replace or improve upon it, but everything of importance to safety professionals, engineers and managers can be found in this all-encompassing reference instead. Frank Lees' world renowned work has been fully revised and expanded by a team of leading chemical and process engineers working under the guidance of one of the world’s chief experts in this field. Sam Mannan is professor of chemical engineering at Texas A&M University, and heads the Mary Kay O’Connor Process Safety Center at Texas A&M. He received his MS and Ph.D. in chemical engineering from the University of Oklahoma, and joined the chemical engineering department at Texas A&M University as a professor in 1997. He has over 20 years of experience as an engineer, working both in industry and academia. New detail is added to chapters on fire safety, engineering, explosion hazards, analysis and suppression, and new appendices feature more recent disasters. The many thousands of references have been updated along with standards and codes of practice issued by authorities in the US, UK/Europe and internationally. In addition to all this, more regulatory relevance and case studies have been included in this edition. Written in a clear and concise style, Loss Prevention in the Process Industries covers traditional areas of personal safety as well as the more technological aspects and thus provides balanced and in-depth coverage of the whole field of safety and loss prevention. * A must-have standard reference for chemical and process engineering safety professionals * The most complete collection of information on the theory, practice, design elements, equipment and laws that pertain to process safety * Only single work to provide everything; principles, practice, codes, standards, data and references needed by those practicing in the field
Download or read book Interdisciplinary Approaches to the Oldowan written by Erella Hovers and published by Springer Science & Business Media. This book was released on 2009-03-08 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: An understanding of the uniquely human behavior of stone tool making tackles questions about hominins’ ability to culturally transmit and expand their base of social and practical knowledge and their cognitive capacities for advanced planning. The appearance of stone tools has often been viewed as a threshold event, impacting directly and profoundly the later course of cultural and social evolution. Alternatively, it has been understood as a prelude to significant succeeding changes in behavioral, social and biological evolution of hominins. This book presents a series of recent enquiries into the technological and adaptive significance of Oldowan stone tools. While anchored in a long research tradition, these studies rely on recent discoveries and innovative analyses of the archaeological record of ca. 2.6–1.0 million years ago in Africa and Eurasia, dealing with the earliest lithic industries as manifestations of hominin adaptations and as expressions of hominin cognitive abilities.
Download or read book Athenaeum and Literary Chronicle written by and published by . This book was released on 1868 with total page 672 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book National Union Catalog written by and published by . This book was released on 1979 with total page 744 pages. Available in PDF, EPUB and Kindle. Book excerpt: Includes entries for maps and atlases.
Download or read book Art and Artists of Twentieth century China written by Michael Sullivan and published by Univ of California Press. This book was released on 1996 with total page 451 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Sullivan presents a wealth of material that has never before appeared in a Western language. I expect it will be the standard book on twentieth-century Chinese art for the foreseeable future."--Julia F. Andrews, author of Painters and Politics in the People's Republic of China "A most sympathetic and useful guide to twentieth-century Chinese art. Long the leading scholar on the subject, Professor Sullivan has presented a lucid account of a most dramatic chapter in Chinese art in a complex interplay of aesthetics, politics, cultural, and social history."--Wen C. Fong, Princeton University "So much of China's art in the twentieth century has to do with artistic (and political) ideas from the West that is is appropriate that one of its first comprehensive histories should be written by a Western scholar--especially one who has known personally many of China's leading artistic figures of the last fifty years. Not only does Professor Sullivan tell the complex story of twentieth century China art with lucidity and style, his learned text is also illuminated with witty anecdotes and incisive observations that can only come from an indsider."--Johnson Chang (Chang Tson-zung), Director, Hanart Tz Gallery, Hong Kong
Download or read book The United States Catalog written by and published by . This book was released on 1909 with total page 700 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Austere Luminosity of Chinese Classical Furniture written by Sarah Handler and published by Univ of California Press. This book was released on 2001-10-30 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Sarah Handler has written a true cultural history of Chinese furniture. Her book is a highly erudite blend of art history and social history, yet with a structure as transparent and elegant as that of a fine piece of Ming-style furniture."—Klaas Ruitenbeek, Louise Hawley Stone Chair of Far Eastern Art, Royal Ontario Museum, Toronto, and author of Carpentry and Building in Late Imperial China: A Study of the Fifteenth-Century Carpenter's Manual Lu Ban jing
Download or read book The Cinema Book written by Bloomsbury Publishing and published by Bloomsbury Publishing. This book was released on 2019-07-25 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Cinema Book is widely recognised as the ultimate guide to cinema. Authoritative and comprehensive, the third edition has been extensively revised, updated and expanded in response to developments in cinema and cinema studies. Lavishly illustrated in colour, this edition features a wealth of exciting new sections and in-depth case studies. Sections address Hollywood and other World cinema histories, key genres in both fiction and non-fiction film, issues such as stars, technology and authorship, and major theoretical approaches to understanding film.
Download or read book Guide to Reprints written by and published by . This book was released on 2008 with total page 1156 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Agriculture and Industry in South Eastern Roman Britain written by David Bird and published by Oxbow Books. This book was released on 2016-12-31 with total page 397 pages. Available in PDF, EPUB and Kindle. Book excerpt: The ancient counties surrounding the Weald in the SE corner of England have a strongly marked character of their own that has survived remarkably well in the face of ever-increasing population pressure. The area is, however, comparatively neglected in discussion of Roman Britain, where it is often subsumed into a generalised treatment of the ‘civilian’ part of Britannia that is based largely on other parts of the country. This book aims to redress the balance. The focus is particularly on Kent, Surrey and Sussex account is taken of information from neighboring counties, particularly when the difficult subsoils affect the availability of evidence. An overview of the environment and a consideration of themes relevant to the South-East as a whole accompany 14 papers covering the topics of rural settlement in each county, crops, querns and millstones, animal exploitation, salt production, leatherworking, the working of bone and similar materials, the production of iron and iron objects, non-ferrous metalworking, pottery production and the supply of tile to Roman London. Agriculture and industry provides an up-to-date assessment of our knowledge of the southern hinterland of Roman London and an area that was particularly open to influences from the Continent.
Download or read book The American Landscape written by Stephen F. Mills and published by Routledge. This book was released on 2013-12-19 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt: American landscapes are some of the best-known images in the world: we recognize Niagara Falls, the Grand Canyon, the Manhattan skyline, and the streets of San Francisco in a thousand advertisements and TV shows. But how have these places come to be as they are, and why are some places familiar while others are quite unknown? The American Landscape introduces the reader to the changing face of the American environment, tracing the way in which the present array of forests and farms, parks and superhighways, cities and suburbs have come about, and how these changes have been thought about, painted, turned into movie sets, etc.
