Download or read book Fire Safety of LPG in Marine Transportation written by and published by . This book was released on 1980 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Characterization and Evaluation of Accidental Explosions written by Roger A. Strehlow and published by . This book was released on 1975 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Lees Loss Prevention in the Process Industries written by Frank Lees and published by Elsevier. This book was released on 2005-01-25 with total page 3708 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the last three decades the process industries have grown very rapidly, with corresponding increases in the quantities of hazardous materials in process, storage or transport. Plants have become larger and are often situated in or close to densely populated areas. Increased hazard of loss of life or property is continually highlighted with incidents such as Flixborough, Bhopal, Chernobyl, Three Mile Island, the Phillips 66 incident, and Piper Alpha to name but a few. The field of Loss Prevention is, and continues to, be of supreme importance to countless companies, municipalities and governments around the world, because of the trend for processing plants to become larger and often be situated in or close to densely populated areas, thus increasing the hazard of loss of life or property. This book is a detailed guidebook to defending against these, and many other, hazards. It could without exaggeration be referred to as the "bible" for the process industries. This is THE standard reference work for chemical and process engineering safety professionals. For years, it has been the most complete collection of information on the theory, practice, design elements, equipment, regulations and laws covering the field of process safety. An entire library of alternative books (and cross-referencing systems) would be needed to replace or improve upon it, but everything of importance to safety professionals, engineers and managers can be found in this all-encompassing reference instead. Frank Lees' world renowned work has been fully revised and expanded by a team of leading chemical and process engineers working under the guidance of one of the world’s chief experts in this field. Sam Mannan is professor of chemical engineering at Texas A&M University, and heads the Mary Kay O’Connor Process Safety Center at Texas A&M. He received his MS and Ph.D. in chemical engineering from the University of Oklahoma, and joined the chemical engineering department at Texas A&M University as a professor in 1997. He has over 20 years of experience as an engineer, working both in industry and academia. New detail is added to chapters on fire safety, engineering, explosion hazards, analysis and suppression, and new appendices feature more recent disasters. The many thousands of references have been updated along with standards and codes of practice issued by authorities in the US, UK/Europe and internationally. In addition to all this, more regulatory relevance and case studies have been included in this edition. Written in a clear and concise style, Loss Prevention in the Process Industries covers traditional areas of personal safety as well as the more technological aspects and thus provides balanced and in-depth coverage of the whole field of safety and loss prevention. * A must-have standard reference for chemical and process engineering safety professionals * The most complete collection of information on the theory, practice, design elements, equipment and laws that pertain to process safety * Only single work to provide everything; principles, practice, codes, standards, data and references needed by those practicing in the field
Download or read book LPG Land Transportation and Storage Safety written by and published by . This book was released on 1981 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Gaseous Detonations written by M.A. Nettleton and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: My introduction to the fascinating phenomena associated with detonation waves came through appointments as an external fellow at the Department of Physics, University College of Wales, and at the Department of Mechanical Engineering, University of Leeds. Very special thanks for his accurate guidance through the large body of information on gaseous detonations are due to Professor D. H. Edwards of University College of Wales. Indeed, the onerous task of concisely enumerating the key features of unidimensional theories of detonations was undertaken by him, and Chapter 2 is based on his initial draft. When the text strays to the use of we, it is a deserved acknow ledgement of his contribution. Again, I should like to thank Professor D. Bradley of Leeds University for his enthusiastic encouragement of my efforts at developing a model of the composition limits of detonability through a relationship between run-up distance and composition of the mixture. The text has been prepared in the context of these fellowships, and I am grateful to the Central Electricity Generating Board for its permission to accept these appointments.
Download or read book Offshore Risk Assessment written by Jan-Erik Vinnem and published by Springer Science & Business Media. This book was released on 2013-03-14 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offshore Risk Assessment is the first book to deal with quantified risk assessment (QRA) as applied specifically to offshore installations and operations. Risk assessment techniques have been used for some years in the offshore oil and gas industry, and their use is set to expand increasingly as the industry moves into new areas and faces new challenges in older regions. The book starts with a thorough discussion of risk analysis methodology. Subsequent chapters are devoted to analytical approaches to escalation, escape, evacuation and rescue analysis of safety and emergency systems. Separate chapters analyze the main hazards of offshore structures: Fire, explosion, collision and falling objects. Risk mitigation and control are then discussed, followed by an outline of an alternative approach to risk modelling that focuses especially on the risk of short-duration activities. Not only does the book describe the state of the art of QRA, it also identifies weaknesses and areas that need development. Readership: Besides being a comprehensive reference for academics and students of marine/offshore risk assessment and management, the book should also be owned by professionals in the industry, contractors, suppliers, consultants and regulatory authorities.
Download or read book Offshore Risk Assessment vol 1 written by Jan-Erik Vinnem and published by Springer Science & Business Media. This book was released on 2013-08-24 with total page 597 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offshore Risk Assessment was the first book to deal with quantified risk assessment (QRA) as applied specifically to offshore installations and operations. Risk assessment techniques have been used for more than three decades in the offshore oil and gas industry, and their use is set to expand increasingly as the industry moves into new areas and faces new challenges in older regions. This updated and expanded third edition has been informed by a major R&D program on offshore risk assessment in Norway and summarizes research from 2006 to the present day. Rooted with a thorough discussion of risk metrics and risk analysis methodology, subsequent chapters are devoted to analytical approaches to escalation, escape, evacuation and rescue analysis of safety and emergency systems. Separate chapters analyze the main hazards of offshore structures: fire, explosion, collision, and falling objects as well as structural and marine hazards. Risk mitigation and control are discussed, as well as an illustration of how the results from quantitative risk assessment studies should be presented. The third second edition has a stronger focus on the use of risk assessment techniques in the operation of offshore installations. Also decommissioning of installations is covered. Not only does Offshore Risk Assessment describe the state of the art of QRA, it also identifies weaknesses and areas that need further development. This new edition also illustrates applications or quantitative risk analysis methodology to offshore petroleum applications. A comprehensive reference for academics and students of marine/offshore risk assessment and management, the book should also be owned by professionals in the industry, contractors, suppliers, consultants and regulatory authorities.
Download or read book Pressure Systems Energy Release Protection gas Pressurized Systems written by Samuel J. Brown and published by . This book was released on 1986 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1975 with total page 1000 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Gas Dust and Hybrid Explosions written by W.E. Baker and published by Elsevier. This book was released on 2012-12-02 with total page 277 pages. Available in PDF, EPUB and Kindle. Book excerpt: Damaging accidental explosions are a continuous threat to industry. Categories for such explosions include combustible dust explosions; reactive gas explosions, both confined and unconfined; hybrid explosions involving both gases and dusts; bursts of pressure vessels and piping; and liquid propellant explosions. This book evaluates the physical processes and resulting blast effects for these types of explosions. Special attention is given to reactive gas explosions, both confined and unconfined. This latter class of explosion has occurred all too frequently in refineries and petrochemical complexes, and is also one of the most difficult to predict and evaluate. Much recent work on this topic is reviewed and summarized. This is the only publication of its kind, to date, that offers such a thorough coverage of these types of industrial explosions. [p]Each class of explosion source is reviewed separately, first discussing fundamentals, then presenting methods of analysis and testing, and finally giving curves or equations to predict effects of the particular class of explosion. An extensive bibliography is included together with tables of pertinent properties of explosive materials. The text also includes many figures, equations, tables and a keyword index. The book is intended for researchers in the field of characterizing and mitigating industrial explosions. It will also be of interest to engineers, scientists, and insurers involved in processes.
Download or read book Combustion Flames and Explosions of Gases written by Bernard Lewis and published by Academic Press. This book was released on 2013-10-22 with total page 754 pages. Available in PDF, EPUB and Kindle. Book excerpt: Combustion, Flames, and Explosions of Gases, Second Edition focuses on the processes, methodologies, and reactions involved in combustion phenomena. The publication first offers information on theoretical foundations, reaction between hydrogen and oxygen, and reaction between carbon monoxide and oxygen. Discussions focus on the fundamentals of reaction kinetics, elementary and complex reactions in gases, thermal reaction, and combined hydrogen-carbon monoxide-oxygen reaction. The text then elaborates on the reaction between hydrocarbons and oxygen and combustion waves in laminar flow. The manuscript tackles combustion waves in turbulent flow and air entrainment and burning of jets of fuel gases. Topics include effect of turbulence spectrum and turbulent wrinkling on combustion wave propagation; ignition of high-velocity streams by hot solid bodies; burners with primary air entrainment; and description of jet flames. The book then takes a look at detonation waves in gases; emission spectra, ionization, and electric-field effects in flames; and methods of flame photography and pressure recording. The publication is a valuable reference for readers interested in combustion phenomena.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1989 with total page 968 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Energy Research Abstracts written by and published by . This book was released on 1990 with total page 980 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the Marine Safety Council written by and published by . This book was released on 1979 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Understanding and Managing Threats to the Environment in South Eastern Europe written by Gorazd Mesko and published by Springer Science & Business Media. This book was released on 2011-02-09 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents reflections on a variety of environmental issues in South-Eastern Europe from diverse contemporary scientific disciplines. The contributions address many crucial issues including national environmental policies, economic instruments for preventing crimes against the environment, international waste trafficking, threats to air, water and soil due to mining, management of dump areas, environment protection and food safety from a perspective of public health. The book will be a useful resource for researchers, developers and decision makers interested in the stability and sustainable development of the South-Eastern European countries.
Download or read book Bretherick s Handbook of Reactive Chemical Hazards written by Peter Urben and published by Elsevier. This book was released on 2017-03-18 with total page 1522 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bretherick's Handbook of Reactive Chemical Hazards, Eighth Edition presents the latest updates on the unexpected, but predictable, loss of containment and explosion hazards from chemicals and their admixtures and actual accidents. The extensively cross-referenced book enables readers to avoid explosion and loss of containment of chemicals. Primary and more specialized sources are easily traced, and this new edition includes available record updates, also adding a number of new records. In this newly updated and expanded edition, the content is presented in a clear and user-friendly format. - Includes new pure compound/class of compounds records and updates on all existing records - Presents a worldwide unique reference work on chemical reactive hazards - Lists important hazardous reactions and includes references to real chemical incidents - Provides guidelines on the safe use and handling of chemicals In the lab and industry