Download or read book Engineering Aspects of Shape Memory Alloys written by T W Duerig and published by Butterworth-Heinemann. This book was released on 2013-10-22 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering Aspects of Shape Memory Alloys provides an understanding of shape memory by defining terms, properties, and applications. It includes tutorials, overviews, and specific design examples—all written with the intention of minimizing the science and maximizing the engineering aspects. Although the individual chapters have been written by many different authors, each one of the best in their fields, the overall tone and intent of the book is not that of a proceedings, but that of a textbook. The book consists of five parts. Part I deals with the mechanism of shape memory and the alloys that exhibit the effect. It also defines many essential terms that will be used in later parts. Part II deals primarily with constrained recovery, but to some extent with free recovery. There is an introductory paper which defines terms and principles, then several specific examples of products based on constrained recovery. Both Parts III and IV deal with actuators. Part III introduces engineering principles while Part IV presents several of the specific examples. Finally, Part V deals with superelasticity, with an introductory paper and then several specific examples of product engineering.

Download or read book Shape Memory Alloys written by M. Fremond and published by Springer. This book was released on 2014-05-04 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book consists of two chapters. The first chapter deals with the thermomechanical macroscopic theory describing the transformation and deformation behavior of shape memory alloys. The second chapter deals with the extensive and fundamental review of the experimental works which include crystallography, transformations and mechanical characteristics in Ti-Ni, Cu-base and ferrous shape memory alloys.

Download or read book IUTAM Symposium on Nonlinear Dynamics for Advanced Technologies and Engineering Design written by Marian Wiercigroch and published by Springer Science & Business Media. This book was released on 2013-01-11 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nonlinear dynamics has been enjoying a vast development for nearly four decades resulting in a range of well established theory, with the potential to significantly enhance performance, effectiveness, reliability and safety of physical systems as well as offering novel technologies and designs. By critically appraising the state of the art, it is now time to develop design criteria and technology for new generation products/processes operating on principles of nonlinear interaction and in the nonlinear regime, leading to more effective, sensitive, accurate, and durable methods than what is currently available. This new approach is expected to radically influence the design, control and exploitation paradigms, in a magnitude of contexts. With a strong emphasis on experimentally calibrated and validated models, contributions by top-level international experts will foster future directions for the development of engineering technologies and design using robust nonlinear dynamics modelling and analysis.

Download or read book Piezoelectric Energy Harvesting written by Alper Erturk and published by John Wiley & Sons. This book was released on 2011-04-04 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: The transformation of vibrations into electric energy through the use of piezoelectric devices is an exciting and rapidly developing area of research with a widening range of applications constantly materialising. With Piezoelectric Energy Harvesting, world-leading researchers provide a timely and comprehensive coverage of the electromechanical modelling and applications of piezoelectric energy harvesters. They present principal modelling approaches, synthesizing fundamental material related to mechanical, aerospace, civil, electrical and materials engineering disciplines for vibration-based energy harvesting using piezoelectric transduction. Piezoelectric Energy Harvesting provides the first comprehensive treatment of distributed-parameter electromechanical modelling for piezoelectric energy harvesting with extensive case studies including experimental validations, and is the first book to address modelling of various forms of excitation in piezoelectric energy harvesting, ranging from airflow excitation to moving loads, thus ensuring its relevance to engineers in fields as disparate as aerospace engineering and civil engineering. Coverage includes: Analytical and approximate analytical distributed-parameter electromechanical models with illustrative theoretical case studies as well as extensive experimental validations Several problems of piezoelectric energy harvesting ranging from simple harmonic excitation to random vibrations Details of introducing and modelling piezoelectric coupling for various problems Modelling and exploiting nonlinear dynamics for performance enhancement, supported with experimental verifications Applications ranging from moving load excitation of slender bridges to airflow excitation of aeroelastic sections A review of standard nonlinear energy harvesting circuits with modelling aspects.

Download or read book Smart Structures written by Jan Holnicki-Szulc and published by Springer Science & Business Media. This book was released on 1999-02-28 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: Smart (intelligent) structures have been the focus of a great deal of recent research interest. In this book, leading researchers report the state of the art and discuss new ideas, results and trends in 43 contributions, covering fundamental research issues, the role of intelligent monitoring in structural identification and damage assessment, the potential of automatic control systems in achieving a desired structural behaviour, and a number of practical issues in the analysis and design of smart structures in mechanical and civil engineering applications. Audience: A multidisciplinary reference for materials scientists and engineers in such areas as mechanical, civil, aeronautical, electrical, control, and computer engineering.

Download or read book A Peacebuilding Tool for a Conflict Sensitive Approach to Development written by Asian Development Bank and published by Asian Development Bank. This book was released on 2012-03-01 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Asian Development Bank (ADB) works with a number of developing member countries facing fragile and conflict-affected situations---circumstances that complicate economic development, and might include domestic or international conflict, ethnic tensions, vulnerability to natural disasters, or a confluence of these factors. ADB piloted the peacebuilding tool in Nepal as a conflict-sensitive approach, a key to effective and safe implementation of projects in the country's post-conflict context. The peacebuilding tool is an analytical tool for assisting project team leaders and social experts in understanding the local context, and in identifying potential risks to implementation of development projects that are linked to social conflicts, as well as in formulating mitigation measures for addressing these risks.

Download or read book Viscoelastic Materials written by Roderic S. Lakes and published by Cambridge University Press. This book was released on 2009-04-27 with total page 481 pages. Available in PDF, EPUB and Kindle. Book excerpt: This graduate text on viscoelastic materials addresses design applications as diverse as earplugs, computer disks and medical diagnostics.

Download or read book Shape Memory Microactuators written by Manfred Kohl and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 265 pages. Available in PDF, EPUB and Kindle. Book excerpt: Overview of recent achievements, describing the microactuator development of microvalves and liner actuators comprehensively from concept through prototype. Further key aspects included are three-dimensional models for handling complex SMA actuator geometries and coupled simulation routines that take multifunctional properties into account. Mechanical and thermal optimization criteria are introduced for actuator design, allowing an optimum use of the shape memory effect. It is shown that some of the prototypes presented, e.g. SMA microgrippers, already outperform conventional components.

Download or read book Technology and the Air Force written by Jacob Neufeld and published by DIANE Publishing. This book was released on 2009-06 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of a symposium co-sponsored by the Air Force Historical Foundation and the Air Force History and Museums Program. The symposium covered relevant Air Force technologies ranging from the turbo-jet revolution of the 1930s to the stealth revolution of the 1990s. Illustrations.

Download or read book Proceedings of the 6th International Conference and Exhibition on Sustainable Energy and Advanced Materials written by Ubaidillah Sabino and published by Springer Nature. This book was released on 2020-06-01 with total page 813 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers the proceedings of the 6th International Conference and Exhibition on Sustainable Energy and Advanced Materials (ICE-SEAM 2019), held on 16–17 October 2019 in Surakarta, Indonesia. It focuses on two relatively broad areas – advanced materials and sustainable energy – and a diverse range of subtopics: Advanced Materials and Related Technologies: Liquid Crystals, Semiconductors, Superconductors, Optics, Lasers, Sensors, Mesoporous Materials, Nanomaterials, Smart Ferrous Materials, Amorphous Materials, Crystalline Materials, Biomaterials, Metamaterials, Composites, Polymers, Design, Analysis, Development, Manufacturing, Processing and Testing for Advanced Materials. Sustainable Energy and Related Technologies: Energy Management, Storage, Conservation, Industrial Energy Efficiency, Energy-Efficient Buildings, Energy-Efficient Traffic Systems, Energy Distribution, Energy Modeling, Hybrid and Integrated Energy Systems, Fossil Energy, Nuclear Energy, Bioenergy, Biogas, Biomass Geothermal Power, Non-Fossil Energies, Wind Energy, Hydropower, Solar Photovoltaic, Fuel Cells, Electrification, and Electrical Power Systems and Controls.

Download or read book Physics at Surfaces written by Andrew Zangwill and published by Cambridge University Press. This book was released on 1988-03-24 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: Physics at Surfaces is a unique graduate-level introduction to the physics and chemical physics of solid surfaces, and atoms and molecules that interact with solid surfaces. A subject of keen scientific inquiry since the last century, surface physics emerged as an independent discipline only in the late 1960s as a result of the development of ultra-high vacuum technology and high speed digital computers. With these tools, reliable experimental measurements and theoretical calculations could at last be compared. Progress in the last decade has been truly striking. This volume provides a synthesis of the entire field of surface physics from the perspective of a modern condensed matter physicist with a healthy interest in chemical physics. The exposition intertwines experiment and theory whenever possible, although there is little detailed discussion of technique. This much-needed text will be invaluable to graduate students and researchers in condensed matter physics, physical chemistry and materials science working in, or taking graduate courses in, surface science.

Download or read book Proceedings of the 5th International Conference on Electrical Engineering and Automatic Control written by Bo Huang and published by Springer. This book was released on 2016-07-16 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: On the basis of instrument electrical and automatic control system, the 5th International Conference on Electrical Engineering and Automatic Control (CEEAC) was established at the crossroads of information technology and control technology, and seeks to effectively apply information technology to a sweeping trend that views control as the core of intelligent manufacturing and life. This book takes a look forward into advanced manufacturing development, an area shaped by intelligent manufacturing. It highlights the application and promotion of process control represented by traditional industries, such as the steel industry and petrochemical industry; the technical equipment and system cooperative control represented by robot technology and multi-axis CNC; and the control and support of emerging process technologies represented by laser melting and stacking, as well as the emerging industry represented by sustainable and intelligent life. The book places particular emphasis on the micro-segments field, such as intelligent micro-grids, new energy vehicles, and the Internet of Things.

Download or read book Shape Memory Effects in Alloys written by Jeff Perkins and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 577 pages. Available in PDF, EPUB and Kindle. Book excerpt: The International Symposium on Shape Memory Effects and Appli cations was held at the University of Toronto on May 19-20, 1975, in four sessions over two days, as part of the regular 1975 Spring Meeting of The Metallurgical Society of AlME, sponsored by the Physical Metallurgy Committee of The Metallurgical Society. This was the first symposium on the subject, the only previous meeting at all related being the 1968 NOL Symposium on TiNi and Associated Compounds. One of the major intentions of this Symposium was to provide a forum for cross-communication between workers in the diverse metallurgical areas pertinent to shape memory effects, areas such as martensitic transformation, crystallography and thermodynamics, mechanical behavior, stress-induced transformation, lattice sta bility, and alloy development. Authors were encouraged to place an emphasis on delineation of general controlling factors and mech anisms, and on comparison of shape memory effect alloy systems with systems not exhibiting SME.

Download or read book Columbia Accident Investigation Board Report written by United States. Columbia Accident Investigation Board and published by U.S. Independent Agencies and Commission. This book was released on 2003 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: CD-ROM accompanying vol. 1 contains text of vol. 1 in PDF files and six related motion picture files in Quicktime format.

Download or read book Handbook of Evaporation Technology written by Paul E. Minton and published by William Andrew. This book was released on 1988 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: This excellent volume combines a great deal of data only previously available from many different sources into a single, informative volume. It presents evaporation technology as it exists today. Although evaporation is one of the oldest unit operations, it is also an area with dramatic changes in the last quarter century. Although other methods of separation are available, evaporation remains the best process for many applications. All factors must be evaluated in order to select the best evaporator type. This book will be extremely useful in evaluating and deciding which evaporation technology will meet a particular set of requirements.

Download or read book Saturn V Flight Manual written by NASA and published by WWW.Snowballpublishing.com. This book was released on 2012-09 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designed by Wernher von Braun and Arthur Rudolph at NASA's Marshall Space Flight Center, the Saturn V rocket represents the pinnacle of 20th Century technological achievement. The only launch vehicle in history to transport astronauts beyond Low Earth Orbit, the Saturn V delivered 24 men to the moon. To this day it holds records as the tallest (363 feet), heaviest (nearly 7 million lbs.) and most powerful (over 7.6 million pounds-force of thrust) launch vehicle ever produced. It also remains one of the most reliable, achieving 12 successful launches with one partial failure - the unmanned Apollo 6 which suffered vibration damage on lift-off, resulting in a sub-standard orbit. The Saturn series of rockets resulted from Von Braun's work on the German V-2 and Jupiter series rockets. The Saturn I, a 2-stage liquid-fueled rocket, flew ten times between 1961 and 1965. A uprated version the 1B carried the first crewed Apollo flight into orbit in 1968. The Saturn V, which first flew in 1967, was a three-stage rocket. The first stage, which burned RP-1 and LOX, consisted of five F-1 engines. The second stage used five J-2 engines which burned LOX and liquid hydrogen (LH2). The third stage, based on the second stage of the Saturn 1B, carried a single J-2. The Saturn V could carry up to 262,000 pounds to Low Earth Orbit and more critically, 100,000 pounds to the Moon. Created by NASA as a single-source reference as to the characteristics and functions of the Saturn V, this manual was standard issue to the astronauts of the Apollo and Skylab eras. It contains information about the Saturn V system, range safety and instrumentation, monitoring and control, prelaunch events, and pogo oscillations. It provides a fascinating overview of the rocket that made "one giant leap for mankind" possible.

Download or read book Flow induced Vibration written by Robert D. Blevins and published by . This book was released on 1977 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: