Download or read book A Short Course in Soil Structure Engineering of Deep Foundations Excavations and Tunnels written by Charles Ng and published by Thomas Telford. This book was released on 2004-09-26 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: CD includes student editions of the OASYS software packages 'FREW' and 'Safe'.
Download or read book A Short Course in Foundation Engineering written by N.E. Simons and published by Elsevier. This book was released on 2013-10-22 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Short Course in Foundation Engineering discusses methods for predicting the failure loads, and the deformations at working loads, of piled and non-piled foundations. The first chapter covers the definition, principle, and computation of effective stress. Chapter 2 discusses the nature and measurement of shear stress. Chapter 3 deals with the concerns in immediate settlements, such as elastic stress distributions, heave of excavations, and estimates of undrained modulus. Chapter 4 tackles the bearing capacity of footings, while Chapter 5 talks about settlement analysis. The last chapter covers piled foundations. The book will be of great use to civil engineers who wish to have a better understanding of foundation engineering.
Download or read book Introduction to Tunnel Construction written by David Chapman and published by CRC Press. This book was released on 2017-11-27 with total page 578 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tunnelling provides a robust solution to a variety of engineering challenges. It is a complex process, which requires a firm understanding of the ground conditions as well as the importance of ground-structure interaction. This book covers the full range of areas related to tunnel construction required to embark upon a career in tunnelling. It also includes a number of case studies related to real tunnel projects, to demonstrate how the theory applies in practice. New features of this second edition include: the introduction of a case study related to Crossrail’s project in London, focussing on the Whitechapel and Liverpool Street station tunnels and including considerations of building tunnels in a congested urban area; and further information on recent developments in tunnel boring machines, including further examples of all the different types of machine as well as multi-mode machines. The coverage includes: Both hard-rock and soft-ground conditions Site investigation, parameter selection, and design considerations Methods of improving the stability of the ground and lining techniques Descriptions of the various main tunnelling techniques Health and safety considerations Monitoring of tunnels during construction Description of the latest tunnel boring machines Case studies with real examples, including Crossrail’s project in London Clear, concise, and heavily illustrated, this is a vital text for final-year undergraduate and MSc students and an invaluable starting point for young professionals and novices in tunnelling.
Download or read book Tall Building Foundation Design written by Harry G. Poulos and published by CRC Press. This book was released on 2017-07-20 with total page 761 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive guide to the design of foundations for tall buildings. After a general review of the characteristics of tall buildings, various foundation options are discussed followed by the general principles of foundation design as applied to tall buildings. Considerable attention is paid to the methods of assessment of the geotechnical design parameters, as this is a critical component of the design process. A detailed treatment is then given to foundation design for various conditions, including ultimate stability, serviceability, ground movements, dynamic loadings and seismic loadings. Basement wall design is also addressed. The last part of the book deals with pile load testing and foundation performance measurement, and finally, the description of a number of case histories. A feature of the book is the emphasis it places on the various stages of foundation design: preliminary, detailed and final, and the presentation of a number of relevant methods of design associated with each stage.
Download or read book Aquananotechnology written by David E. Reisner and published by CRC Press. This book was released on 2014-09-24 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: The world’s fresh water supplies are dwindling rapidly—even wastewater is now considered an asset. By 2025, most of the world's population will be facing serious water stresses and shortages. Aquananotechnology: Global Prospects breaks new ground with its informative and innovative introduction of the application of nanotechnology to the remediation of contaminated water for drinking and industrial use. It provides a comprehensive overview, from a global perspective, of the latest research and developments in the use of nanotechnology for water purification and desalination methods. The book also covers approaches to remediation such as high surface area nanoscale media for adsorption of toxic species, UV treatment of pathogens, and regeneration of saturated media with applications in municipal water supplies, produced water from fracking, ballast water, and more. It also discusses membranes, desalination, sensing, engineered polymers, magnetic nanomaterials, electrospun nanofibers, photocatalysis, endocrine disruptors, and Al13 clusters. It explores physics-based phenomena such as subcritical water and cavitation-induced sonoluminescence, and fog harvesting. With contributions from experts in developed and developing countries, including those with severe contamination, such as China, India, and Pakistan, the book’s content spans a wide range of the subject areas that fall under the aquananotechnology banner, either squarely or tangentially. The book strongly emphasizes sorption media, with broad application to a myriad of contaminants—both geogenic and anthropogenic—keeping in mind that it is not enough for water to be potable, it must also be palatable.
Download or read book Geotechnics for Transportation Infrastructure written by Ravi Sundaram and published by Springer. This book was released on 2019-05-30 with total page 702 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents selected papers from the International Symposium on Geotechnics for Transportation Infrastructure (ISGTI 2018). The research papers cover geotechnical interventions for the diverse fields of policy formulation, design, implementation, operation and management of the different modes of travel, namely road, air, rail and waterways. This book will be of interest to academic and industry researchers working in transportation geotechnics, as also to practicing engineers, policy makers, and civil agencies.
Download or read book Pile Design and Construction Practice written by Willis H. Thomas and published by CRC Press. This book was released on 2007-12-06 with total page 566 pages. Available in PDF, EPUB and Kindle. Book excerpt: This international handbook is essential for geotechnical engineers and engineering geologists responsible for designing and constructing piled foundations. It explains general principles and practice and details current types of pile, piling equipment and methods. It includes calculations of the resistance of piles to compressive loads, pile group
Download or read book Fundamentals of Deep Excavations written by Chang-Yu Ou and published by CRC Press. This book was released on 2021-10-26 with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excavation is an important segment of foundation engineering (e.g., in the construction of the foundations or basements of high-rise buildings, underground oil tanks, or subways). However, the excavation knowledge introduced in most books on foundation engineering is too simple to handle actual excavation analysis and design. Moreover, with economic development and urbanization, excavations go deeper and are larger in scale. These conditions require elaborate analysis, design methods and construction technologies. This book is aimed at both theoretical explication and practical application. From basic to advanced, this book attempts to achieve theoretical rigor and consistency. Each chapter is followed by a problem set so that the book can be readily taught at senior undergraduate and graduate levels. The solution to the problems at the end of the chapters can be found on the website (http://www.ct.ntust.edu.tw/ou/). On the other hand, the analysis methods introduced in the book can be used in actual analysis and design as they contain the most up-to-date knowledge. Therefore, this book is suitable for teachers who teach foundation engineering and/or deep excavation courses and engineers who are engaged in excavation analysis and design.
Download or read book Advances in Spatio Temporal Analysis written by Xinming Tang and published by CRC Press. This book was released on 2007-08-23 with total page 873 pages. Available in PDF, EPUB and Kindle. Book excerpt: Developments in Geographic Information Technology have raised the expectations of users. A static map is no longer enough; there is now demand for a dynamic representation. Time is of great importance when operating on real world geographical phenomena, especially when these are dynamic. Researchers in the field of Temporal Geographical Information Systems (TGIS) have been developing methods of incorporating time into geographical information systems. Spatio-temporal analysis embodies spatial modelling, spatio-temporal modelling and spatial reasoning and data mining. Advances in Spatio-Temporal Analysis contributes to the field of spatio-temporal analysis, presenting innovative ideas and examples that reflect current progress and achievements.
Download or read book Proceedings of the Institution of Civil Engineers written by and published by . This book was released on 2004 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Pile Design and Construction Practice written by Michael Tomlinson and published by CRC Press. This book was released on 2014-10-08 with total page 597 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written to Eurocode 7 and the UK National AnnexUpdated to reflect the current usage of Eurocode 7, along with relevant parts of the British Standards, Pile Design and Construction Practice, Sixth Edition maintains the empirical correlations of the original-combining practical know how with scientific knowledge-and emphasizing relevant principles an
Download or read book Deep Excavations in Soil written by John Endicott and published by CRC Press. This book was released on 2020-08-04 with total page 213 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book describes the theory and current practices for design of earth lateral support for deep excavations in soil. It addresses basic principles of soil mechanics and explains how these principles are embodied in design methods including hand calculations. It then introduces the use of numerical methods including the fundamental “beam on springs” models, and then more sophisticated computer programmes which can model soil as a continuum in two or three dimensions. Constitutive relationships are introduced that are in use for representing the behaviour of soil including a strain hardening model, and a Cam Clay model including groundwater flow and coupled consolidation. These methods are illustrated by reference to practical applications and case histories from the author’s direct experience, and some of the pitfalls that can occur are discussed. Theory and design are strongly tied to construction practice, with emphasis on monitoring the retaining structures and movement of surrounding ground and structures, in the context of safety and the Observational Method. Examples are presented for conventional “Bottom-up” and “Top-down” sequences, along with hybrid sequences giving tips on how to optimise the design and effect economies of cost and time for construction. It is written for practising geotechnical, civil and structural engineers, and especially for senior and MSc students.
Download or read book An Introduction to Foundations of Structures written by J. Paul Guyer, P.E., R.A. and published by Guyer Partners. This book was released on 2017-12-23 with total page 283 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introductory technical guidance for civil, structural and geotechnical engineers and construction managers interested in design and construction of foundations for buildings and other structures. Here is what is discussed: 1. BACKFILL FOR SUBSURFACE STRUCTURES 2. BEARING CAPACITY ANALYSIS 3. DEEP FOUNDATIONS 4. EARTHWORK FOR FOUNDATIONS 5. ENGINEERING PROPERTIES OF SOIL AND ROCK 6. EXCAVATION FOR STRUCTURES 7. FIELD AND LABORATORY INVESTIGATIONS FOR FOUNDATIONS IN EXPANSIVE SOILS 8. FOUNDATION DESIGN IN COLD REGIONS 9. FOUNDATIONS ON FILL AND BACKFILLING 10. FOUNDATIONS IN AREAS OF SIGNIFICANT FROST PENETRATION.
Download or read book An Introduction to Deep Foundations for Professional Engineers written by J. Paul Guyer, P.E., R.A. and published by Guyer Partners. This book was released on 2023-01-21 with total page 51 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introductory technical guidance for civil engineers, structural engineers, geotechnical engineers and construction managers interested in foundations for buildings and structures. Here is what is discussed: 1. GENERAL, 2. FLOATING FOUNDATIONS, 3. SETTLEMENTS OF COMPENSATED FOUNDATIONS, 4. UNDERPINNING, 5. EXCAVATION PROTECTION, 6. DRILLED PIERS, 7. FOUNDATION SELECTION CONSIDERATIONS, 8. FOUNDATION DESIGN IN COLD REGIONS
Download or read book Analysis and Design of Shallow and Deep Foundations written by Lymon C. Reese and published by John Wiley & Sons. This book was released on 2005-11-25 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: One-of-a-kind coverage on the fundamentals of foundation analysis and design Analysis and Design of Shallow and Deep Foundations is a significant new resource to the engineering principles used in the analysis and design of both shallow and deep, load-bearing foundations for a variety of building and structural types. Its unique presentation focuses on new developments in computer-aided analysis and soil-structure interaction, including foundations as deformable bodies. Written by the world's leading foundation engineers, Analysis and Design of Shallow and Deep Foundations covers everything from soil investigations and loading analysis to major types of foundations and construction methods. It also features: * Coverage on computer-assisted analytical methods, balanced with standard methods such as site visits and the role of engineering geology * Methods for computing the capacity and settlement of both shallow and deep foundations * Field-testing methods and sample case studies, including projects where foundations have failed, supported with analyses of the failure * CD-ROM containing demonstration versions of analytical geotechnical software from Ensoft, Inc. tailored for use by students in the classroom
Download or read book An Introduction to Deep Foundations written by J. Paul Guyer, P.E., R.A. and published by Guyer Partners. This book was released on 2018-10-01 with total page 30 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introductory technical guidance for civil, structural and geotechnical engineers and construction managers interested in design and construction of deep foundations for buildings and other structures. Here is what is discussed: 1. GENERAL 2. FLOATING FOUNDATIONS 3. SETTLEMENTS OF COMPENSATED FOUNDATIONS 4. UNDERPINNING 5. EXCAVATION PROTECTION 6. DRILLED PIERS 7. FOUNDATION SELECTION CONSIDERATIONS.
Download or read book A Short Course in Geotechnical Site Investigation written by N. E. Simons and published by Thomas Telford. This book was released on 2002-10-21 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: Folded card: Identification and description of soils; and, Identification and description of rocks / designed by Environmental Services Group Limited 2007 in accordance with BS EN ISO 14689-1 and BS EN ISO 14688-1 respectively; and designed to be taken into the field during the walk-over survey.
