Download or read book A Rule Based Expert System for Predictive Maintenance of a Hybrid Bus written by Wenjie Chen and published by . This book was released on 2020 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis describes the design and implementation of constructing a predictive maintenance system for a hybrid vehicle to meet the requirements of the STO (Société de transport de l'Outaouais). Thousands of sensors installed on the bus allow us to observe the real-time performance of the bus while it is running. Abnormal sensor values represent adverse operating conditions and bring attention to the inevitable failures of a bus's components. Therefore, by analyzing real-time sensor streams, predictive maintenance is accomplished based on the unnatural behaviour of a hybrid bus. Currently, transport companies still employ traditional methods of maintenance planning, such as emergency maintenance and preventive maintenance. Traditional maintenance strategies require a great deal of technicians and time to inspect the buses regularly and carefully. In comparison, predictive maintenance can monitor the performance of buses based on the condition of their equipment. To collect data from the hybrid bus and share data with the Internet, IoT technology is adopted to develop predictive maintenance architecture for a fleet management system. Our team devised an IoT architecture for the fleet management system, including the perception layer, middleware layer and application layer. My work focuses on the perception layer, which is responsible for analyzing sensor values, reporting failures of a hybrid bus and connecting with cloud-servers. As one of the predictive maintenance methods, the expert system (also known as a knowledge-based expert system) is built to store expert knowledge in a specific area. The expert system presented in this thesis can store failures of hybrid buses, symptoms of which were provided to us by technicians from the STO. Such breakdowns assist the expert system in predicting the malfunctions of the bus's components based on the symptoms. Inspired by the IDEA methodology, failure symptoms can be represented by active rules with three essential components: event, condition and action. These rules can also be translated into active database features like triggers and mapped into an active database. A gateway is installed on a bus and composed of four modules: data acquisition module, active rules module, rules management module and user interface module. Within the parameters of the architecture and the gateway, this thesis analyzes the entities, relationships and operations in the dynamic system and forms a relational database to store the information related to the bus and active rules.

Download or read book Expert Systems in Predictive Maintenance written by Edward D. Winfield and published by . This book was released on 1987 with total page 6 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Shock and Vibration Digest written by and published by . This book was released on 1999 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Artificial Intelligence in HCI written by Helmut Degen and published by Springer Nature. This book was released on 2020-07-10 with total page 461 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the First International Conference on Artificial Intelligence in HCI, AI-HCI 2020, held as part of the 22nd International Conference on Human-Computer Interaction, HCII 2020, in July 2020. The conference was planned to be held in Copenhagen, Denmark, but had to change to a virtual conference mode due to the COVID-19 pandemic. The conference presents results from academic and industrial research, as well as industrial experiences, on the use of Artificial Intelligence technologies to enhance Human-Computer Interaction. From a total of 6326 submissions, a total of 1439 papers and 238 posters has been accepted for publication in the HCII 2020 proceedings. The 30 papers presented in this volume were organized in topical sections as follows: Human-Centered AI; and AI Applications in HCI.pical sections as follows: Human-Centered AI; and AI Applications in HCI.

Download or read book IoT Streams for Data Driven Predictive Maintenance and IoT Edge and Mobile for Embedded Machine Learning written by Joao Gama and published by Springer Nature. This book was released on 2021-01-09 with total page 317 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes selected papers from the Second International Workshop on IoT Streams for Data-Driven Predictive Maintenance, IoT Streams 2020, and First International Workshop on IoT, Edge, and Mobile for Embedded Machine Learning, ITEM 2020, co-located with ECML/PKDD 2020 and held in September 2020. Due to the COVID-19 pandemic the workshops were held online. The 21 full papers and 3 short papers presented in this volume were thoroughly reviewed and selected from 35 submissions and are organized according to the workshops and their topics: IoT Streams 2020: Stream Learning; Feature Learning; ITEM 2020: Unsupervised Machine Learning; Hardware; Methods; Quantization.

Download or read book Feature Extraction written by Isabelle Guyon and published by Springer. This book was released on 2008-11-16 with total page 765 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is both a reference for engineers and scientists and a teaching resource, featuring tutorial chapters and research papers on feature extraction. Until now there has been insufficient consideration of feature selection algorithms, no unified presentation of leading methods, and no systematic comparisons.

Download or read book NASA SP written by and published by . This book was released on 1988 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Multi Agent Based Production Planning and Control written by Jie Zhang and published by John Wiley & Sons. This book was released on 2017-08-28 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: At the crossroads of artificial intelligence, manufacturing engineering, operational research and industrial engineering and management, multi-agent based production planning and control is an intelligent and industrially crucial technology with increasing importance. This book provides a complete overview of multi-agent based methods for today’s competitive manufacturing environment, including the Job Shop Manufacturing and Re-entrant Manufacturing processes. In addition to the basic control and scheduling systems, the author also highlights advance research in numerical optimization methods and wireless sensor networks and their impact on intelligent production planning and control system operation. Enables students, researchers and engineers to understand the fundamentals and theories of multi-agent based production planning and control Written by an author with more than 20 years’ experience in studying and formulating a complete theoretical system in production planning technologies Fully illustrated throughout, the methods for production planning, scheduling and controlling are presented using experiments, numerical simulations and theoretical analysis Comprehensive and concise, Multi-Agent Based Production Planning and Control is aimed at the practicing engineer and graduate student in industrial engineering, operational research, and mechanical engineering. It is also a handy guide for advanced students in artificial intelligence and computer engineering.

Download or read book The Engineering Index Annual written by and published by . This book was released on 1992 with total page 2264 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since its creation in 1884, Engineering Index has covered virtually every major engineering innovation from around the world. It serves as the historical record of virtually every major engineering innovation of the 20th century. Recent content is a vital resource for current awareness, new production information, technological forecasting and competitive intelligence. The world?s most comprehensive interdisciplinary engineering database, Engineering Index contains over 10.7 million records. Each year, over 500,000 new abstracts are added from over 5,000 scholarly journals, trade magazines, and conference proceedings. Coverage spans over 175 engineering disciplines from over 80 countries. Updated weekly.

Download or read book Advances in Production Management Systems Artificial Intelligence for Sustainable and Resilient Production Systems written by Alexandre Dolgui and published by Springer Nature. This book was released on 2021-09-01 with total page 662 pages. Available in PDF, EPUB and Kindle. Book excerpt: The five-volume set IFIP AICT 630, 631, 632, 633, and 634 constitutes the refereed proceedings of the International IFIP WG 5.7 Conference on Advances in Production Management Systems, APMS 2021, held in Nantes, France, in September 2021.* The 378 papers presented were carefully reviewed and selected from 529 submissions. They discuss artificial intelligence techniques, decision aid and new and renewed paradigms for sustainable and resilient production systems at four-wall factory and value chain levels. The papers are organized in the following topical sections: Part I: artificial intelligence based optimization techniques for demand-driven manufacturing; hybrid approaches for production planning and scheduling; intelligent systems for manufacturing planning and control in the industry 4.0; learning and robust decision support systems for agile manufacturing environments; low-code and model-driven engineering for production system; meta-heuristics and optimization techniques for energy-oriented manufacturing systems; metaheuristics for production systems; modern analytics and new AI-based smart techniques for replenishment and production planning under uncertainty; system identification for manufacturing control applications; and the future of lean thinking and practice Part II: digital transformation of SME manufacturers: the crucial role of standard; digital transformations towards supply chain resiliency; engineering of smart-product-service-systems of the future; lean and Six Sigma in services healthcare; new trends and challenges in reconfigurable, flexible or agile production system; production management in food supply chains; and sustainability in production planning and lot-sizing Part III: autonomous robots in delivery logistics; digital transformation approaches in production management; finance-driven supply chain; gastronomic service system design; modern scheduling and applications in industry 4.0; recent advances in sustainable manufacturing; regular session: green production and circularity concepts; regular session: improvement models and methods for green and innovative systems; regular session: supply chain and routing management; regular session: robotics and human aspects; regular session: classification and data management methods; smart supply chain and production in society 5.0 era; and supply chain risk management under coronavirus Part IV: AI for resilience in global supply chain networks in the context of pandemic disruptions; blockchain in the operations and supply chain management; data-based services as key enablers for smart products, manufacturing and assembly; data-driven methods for supply chain optimization; digital twins based on systems engineering and semantic modeling; digital twins in companies first developments and future challenges; human-centered artificial intelligence in smart manufacturing for the operator 4.0; operations management in engineer-to-order manufacturing; product and asset life cycle management for smart and sustainable manufacturing systems; robotics technologies for control, smart manufacturing and logistics; serious games analytics: improving games and learning support; smart and sustainable production and supply chains; smart methods and techniques for sustainable supply chain management; the new digital lean manufacturing paradigm; and the role of emerging technologies in disaster relief operations: lessons from COVID-19 Part V: data-driven platforms and applications in production and logistics: digital twins and AI for sustainability; regular session: new approaches for routing problem solving; regular session: improvement of design and operation of manufacturing systems; regular session: crossdock and transportation issues; regular session: maintenance improvement and lifecycle management; regular session: additive manufacturing and mass customization; regular session: frameworks and conceptual modelling for systems and services efficiency; regular session: optimization of production and transportation systems; regular session: optimization of supply chain agility and reconfigurability; regular session: advanced modelling approaches; regular session: simulation and optimization of systems performances; regular session: AI-based approaches for quality and performance improvement of production systems; and regular session: risk and performance management of supply chains *The conference was held online.

Download or read book Autonomous Horizons written by Greg Zacharias and published by Independently Published. This book was released on 2019-04-05 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dr. Greg Zacharias, former Chief Scientist of the United States Air Force (2015-18), explores next steps in autonomous systems (AS) development, fielding, and training. Rapid advances in AS development and artificial intelligence (AI) research will change how we think about machines, whether they are individual vehicle platforms or networked enterprises. The payoff will be considerable, affording the US military significant protection for aviators, greater effectiveness in employment, and unlimited opportunities for novel and disruptive concepts of operations. Autonomous Horizons: The Way Forward identifies issues and makes recommendations for the Air Force to take full advantage of this transformational technology.

Download or read book Industrial AI written by Jay Lee and published by Springer Nature. This book was released on 2020-02-07 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces Industrial AI in multiple dimensions. Industrial AI is a systematic discipline which focuses on developing, validating and deploying various machine learning algorithms for industrial applications with sustainable performance. Combined with the state-of-the-art sensing, communication and big data analytics platforms, a systematic Industrial AI methodology will allow integration of physical systems with computational models. The concept of Industrial AI is in infancy stage and may encompass the collective use of technologies such as Internet of Things, Cyber-Physical Systems and Big Data Analytics under the Industry 4.0 initiative where embedded computing devices, smart objects and the physical environment interact with each other to reach intended goals. A broad range of Industries including automotive, aerospace, healthcare, semiconductors, energy, transportation, mining, construction, and industrial automation could harness the power of Industrial AI to gain insights into the invisible relationship of the operation conditions and further use that insight to optimize their uptime, productivity and efficiency of their operations. In terms of predictive maintenance, Industrial AI can detect incipient changes in the system and predict the remains useful life and further to optimize maintenance tasks to avoid disruption to operations.

Download or read book WIPO Technology Trends 2019 Artificial Intelligence written by World Intellectual Property Organization and published by WIPO. This book was released on 2019-01-21 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first report in a new flagship series, WIPO Technology Trends, aims to shed light on the trends in innovation in artificial intelligence since the field first developed in the 1950s.

Download or read book An Introduction to Knowledge Engineering written by Simon Kendal and published by Springer Science & Business Media. This book was released on 2007-08-08 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: An Introduction to Knowledge Engineering presents a simple but detailed exp- ration of current and established work in the ?eld of knowledge-based systems and related technologies. Its treatment of the increasing variety of such systems is designed to provide the reader with a substantial grounding in such techno- gies as expert systems, neural networks, genetic algorithms, case-based reasoning systems, data mining, intelligent agents and the associated techniques and meth- ologies. The material is reinforced by the inclusion of numerous activities that provide opportunities for the reader to engage in their own research and re?ection as they progress through the book. In addition, self-assessment questions allow the student to check their own understanding of the concepts covered. The book will be suitable for both undergraduate and postgraduate students in computing science and related disciplines such as knowledge engineering, arti?cial intelligence, intelligent systems, cognitive neuroscience, robotics and cybernetics. vii Contents Foreword vii 1 An Introduction to Knowledge Engineering. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Section 1: Data, Information and Knowledge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Section 2: Skills of a Knowledge Engineer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Section 3: An Introduction to Knowledge-Based Systems. . . . . . . . . . . . . . . . . 18 2 Types of Knowledge-Based Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Section 1: Expert Systems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Section 2: Neural Networks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Section 3: Case-Based Reasoning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 Section 4: Genetic Algorithms. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 Section 5: Intelligent Agents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74 Section 6: Data Mining . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83 3 Knowledge Acquisition. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89 4 Knowledge Representation and Reasoning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108 Section 1: Using Knowledge. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109 Section 2: Logic, Rules and Representation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116 Section 3: Developing Rule-Based Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126 Section 4: Semantic Networks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Download or read book Artificial Intelligence and Applied Mathematics in Engineering Problems written by D. Jude Hemanth and published by Springer Nature. This book was released on 2020-01-03 with total page 1105 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book features research presented at the 1st International Conference on Artificial Intelligence and Applied Mathematics in Engineering, held on 20–22 April 2019 at Antalya, Manavgat (Turkey). In today’s world, various engineering areas are essential components of technological innovations and effective real-world solutions for a better future. In this context, the book focuses on problems in engineering and discusses research using artificial intelligence and applied mathematics. Intended for scientists, experts, M.Sc. and Ph.D. students, postdocs and anyone interested in the subjects covered, the book can also be used as a reference resource for courses related to artificial intelligence and applied mathematics.

Download or read book Fuzzy Expert Systems written by Abraham Kandel and published by CRC Press. This book was released on 1991-11-12 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: Until recently, fuzzy logic was the intellectual plaything of a handful of researchers. Now it is being used to enhance the power of intelligent systems, as well as improve the performance and reduce the cost of intelligent and "smart" products appearing in the commercial market. Fuzzy Expert Systems focuses primarily on the theory of fuzzy expert systems and their applications in science and engineering. In doing so, it provides the first comprehensive study of "soft" expert systems and applications for those systems. Topics covered include general purpose fuzzy expert systems, processing imperfect information using structured frameworks, the fuzzy linguistic inference network generator, fuzzy associative memories, the role of approximate reasoning in medical expert systems, MILORD (a fuzzy expert systems shell), and COMAX (an autonomous fuzzy expert system for tactical communications networks. Fuzzy Expert Systems provides an invaluable reference resource for researchers and students in artificial intelligence (AI) and approximate reasoning (AR), as well as for other researchers looking for methods to apply similar tools in their own designs of intelligent systems.

Download or read book Hybrid Electric Vehicles written by Chris Mi and published by John Wiley & Sons. This book was released on 2017-11-29 with total page 597 pages. Available in PDF, EPUB and Kindle. Book excerpt: The latest developments in the field of hybrid electric vehicles Hybrid Electric Vehicles provides an introduction to hybrid vehicles, which include purely electric, hybrid electric, hybrid hydraulic, fuel cell vehicles, plug-in hybrid electric, and off-road hybrid vehicular systems. It focuses on the power and propulsion systems for these vehicles, including issues related to power and energy management. Other topics covered include hybrid vs. pure electric, HEV system architecture (including plug-in & charging control and hydraulic), off-road and other industrial utility vehicles, safety and EMC, storage technologies, vehicular power and energy management, diagnostics and prognostics, and electromechanical vibration issues. Hybrid Electric Vehicles, Second Edition is a comprehensively updated new edition with four new chapters covering recent advances in hybrid vehicle technology. New areas covered include battery modelling, charger design, and wireless charging. Substantial details have also been included on the architecture of hybrid excavators in the chapter related to special hybrid vehicles. Also included is a chapter providing an overview of hybrid vehicle technology, which offers a perspective on the current debate on sustainability and the environmental impact of hybrid and electric vehicle technology. Completely updated with new chapters Covers recent developments, breakthroughs, and technologies, including new drive topologies Explains HEV fundamentals and applications Offers a holistic perspective on vehicle electrification Hybrid Electric Vehicles: Principles and Applications with Practical Perspectives, Second Edition is a great resource for researchers and practitioners in the automotive industry, as well as for graduate students in automotive engineering.