Download or read book A Review of Fracture Mechanics Life Technology written by Philip M. Besuner and published by . This book was released on 1986 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lifetime prediction technology for structural components subjected to cyclic loads is examined. The central objectives of the project are: (1) to report the current state of the art, and (2) recommend future development of fracture mechanics-based analytical tools for modeling subcritical fatigue crack growth in structures. Of special interest is the ability to apply these tools to practical engineering problems and the developmental steps necessary to bring vital technologies to this stage. The authors conducted a survey of published literature and numerous discussions with experts in the field of fracture mechanics life technology. One of the key points made is that fracture mechanics analyses of crack growth often involve consideration of fatigue and fracture under extreme conditions. Therefore, inaccuracies in predicting component lifetime will be dominated by inaccuracies in environment and fatigue crack growth relations, stress intensity factor solutions, and methods used to model given loads and stresses. Suggestions made for reducing these inaccuracies include development of improved models of subcritical crack growth, research efforts aimed at better characterizing residual and assembly stresses that can be introduced during fabrication, and more widespread and uniform use of the best existing methods.
Download or read book Advanced Fracture Mechanics and Structural Integrity written by Ashok Saxena and published by CRC Press. This book was released on 2019-02-06 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Fracture Mechanics and Structural Integrity is organized to cover quantitative descriptions of crack growth and fracture phenomena. The mechanics of fracture are explained, emphasizing elastic-plastic and time-dependent fracture mechanics. Applications are presented, using examples from power generation, aerospace, marine, and chemical industries, with focus on predicting the remaining life of structural components and advanced testing metods for structural materials. Numerous examples and end-of-chapter problems are provided, along with references to encourage further study.The book is written for use in an advanced graduate course on fracture mechanics or structural integrity.
Download or read book Introduction to Fracture Mechanics written by Robert O. Ritchie and published by Elsevier. This book was released on 2021-06-23 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Fracture Mechanics presents an introduction to the origins, formulation and application of fracture mechanics for the design, safe operation and life prediction in structural materials and components. The book introduces and informs the reader on how fracture mechanics works and how it is so different from other forms of analysis that are used to characterize mechanical properties. Chapters cover foundational topics and the use of linear-elastic fracture mechanics, involving both K-based characterizing parameter and G-based energy approaches, and how to characterize the fracture toughness of materials under plane-strain and non plane-strain conditions using the notion of crack-resistance or R-curves. Other sections cover far more complex nonlinear-elastic fracture mechanics based on the use of the J-integral and the crack-tip opening displacement. These topics largely involve continuum mechanics descriptions of crack initiation, slow crack growth, eventual instability by overload fracture, and subcritical cracking. Presents how, for a given material, a fracture toughness value can be measured on a small laboratory sample and then used directly to predict the failure (by fracture, fatigue, creep, etc.) of a much larger structure in service Covers the rudiments of fracture mechanics from the perspective of the philosophy underlying the few principles and the many assumptions that form the basis of the discipline Provides readers with a "working knowledge" of fracture mechanics, describing its potency for damage-tolerant design, for preventing failures through appropriate life-prediction strategies, and for quantitative failure analysis (fracture diagnostics)
Download or read book Fracture Mechanics written by Surjya Kumar Maiti and published by Cambridge University Press. This book was released on 2015-10 with total page 301 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book offers detailed treatment on fundamental concepts of fracture mechanics. The text is useful for undergraduate students, graduate students and researchers.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 702 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book NASA Tech Briefs written by and published by . This book was released on 1985 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Structural Adhesive Bonding written by David A. Dillard and published by Elsevier. This book was released on 2010-03-31 with total page 654 pages. Available in PDF, EPUB and Kindle. Book excerpt: Adhesive bonding is often effective, efficient, and often necessary way to join mechanical structures. This important book reviews the most recent improvements in adhesive bonding and their wide-ranging potential in structural engineering.Part one reviews advances in the most commonly used groups of structural adhesives with chapters covering topics such as epoxy, polyurethane, silicone, cyanoacrylate, and acrylic adhesives. The second set of chapters covers the various types of adherends and pre-treatment methods for a range of structural materials such as metals, composites and plastics. Chapters in Part three analyse methods and techniques with topics on joint design, life prediction, fracture mechanics and testing. The final group of chapters gives useful and practical insights into the problems and solutions of adhesive bonding in a variety of hostile environments such as chemical, wet and extreme temperatures.With its distinguished editor and international team of contributors, Advances in structural adhesive bonding is a standard reference for structural and chemical engineers in industry and the academic sector. - Reviews advances in the most commonly used groups of structural adhesives including epoxy, silicone and acrylic adhesives - Examines key issues in adhesive selection featuring substrate compatibility and manufacturing demands - Documents advances in bonding metals, plastics and composites recognising problems and limitations
Download or read book Fatigue Durability and Fracture Mechanics written by S. Seetharamu and published by . This book was released on 2021 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents selected papers presented during Fatigue Durability India 2019. The contents of this volume discuss advances in the field of fatigue, durability, and fracture, and cover mechanical failure and its applications. The chapters cover a wide spectrum of topics, including design, engineering, testing and computational evaluation of the components or systems for fatigue, durability, and fracture mechanics. The contents of this book will appeal not only to academic researchers, but also to design engineers, failure analysts, maintenance engineers, certification personnel, and R&D professionals involved in a wide variety of industries.
Download or read book Fracture and Fatigue of Welded Joints and Structures written by K Macdonald and published by Elsevier. This book was released on 2011-04-19 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: The failure of any welded joint is at best inconvenient and at worst can lead to catastrophic accidents. Fracture and fatigue of welded joints and structures analyses the processes and causes of fracture and fatigue, focusing on how the failure of welded joints and structures can be predicted and minimised in the design process.Part one concentrates on analysing fracture of welded joints and structures, with chapters on constraint-based fracture mechanics for predicting joint failure, fracture assessment methods and the use of fracture mechanics in the fatigue analysis of welded joints. In part two, the emphasis shifts to fatigue, and chapters focus on a variety of aspects of fatigue analysis including assessment of local stresses in welded joints, fatigue design rules for welded structures, k-nodes for offshore structures and modelling residual stresses in predicting the service life of structures.With its distinguished editor and international team of contributors, Fracture and fatigue of welded joints and structures is an essential reference for mechanical, structural and welding engineers, as well as those in the academic sector with a research interest in the field. - Analyses the processes and causes of fracture and fatigue, focusing predicting and minimising the failure of welded joints in the design process - Assesses the fracture of welded joints and structure featuring constraint-based fracture mechanics for predicting joint failure - Explores specific considerations in fatigue analysis including the assessment of local stresses in welded joints and fatigue design rules for welded structures
Download or read book Stochastic Crack Propagation written by Giora Maymon and published by Academic Press. This book was released on 2018-01-02 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: Stochastic Crack Propagation: Essential Practical Aspects describes a feature important to the analysis of stochastic crack propagation, starting with essential background theory. Processes, or phenomena, which are of practical importance in the work of design engineers or R&D teams are described chapter by chapter. Many examples are described and supported by listed references, and files of data that can be used with specialist software to practice design situations are included. Advice on how to use various computer programs to design and predict for stochastic crack growth is also provided, giving professionals a complete guide. - Presents instructions and exercises in the ideal format for professionals, focusing on applications - Explains a methodology on how to optimize the engineering design process by including stochastic crack growth behavior - Provides computational files to help readers get up-to-speed with design using programs like ANSYS and NASTRAN for stochastic crack growth
Download or read book Fracture and Fatigue Control in Structures written by John M. Barsom and published by . This book was released on 1999 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation An introduction for practicing engineers or students at the beginning graduate or advanced undergraduate level, emphasizing the application of fracture mechanics to preventing fracture and fatigue failures in structures, rather than the theoretical aspects of the field. The topics include stress analysis for members with cracks, resistance forces, fatigue crack initiation, and fitness for service. Among the case studies are bridges, oil tankers, and steel casings. The earlier editions were in 1977 and 1987. Annotation copyrighted by Book News, Inc., Portland, OR.
Download or read book Advanced High Pressure O2 H2 Technology written by S. F. Morea and published by . This book was released on 1985 with total page 762 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fracture and Life written by Brian Cotterell and published by World Scientific. This book was released on 2010 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is an interdisciplinary review of the effect of fracture on life, following the development of the understanding of fracture written from a historical perspective. After a short introduction to fracture, the first section of the book covers the effects of fracture on the evolution of the Earth, plants and animals, and man. The second section of the book covers the largely empirical control of fracture from ancient times to the end of the nineteenth century. The final section reviews the development of fracture theory as a discipline and its application during the twentieth century through to the present time.
Download or read book Fracture Mechanics written by Joseph C. Robertson and published by . This book was released on 2017 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Classical fracture mechanics that emerged during the 1920s has gained popularity via LEFM from the 1940s to the 1960s. The principles of classical fracture mechanics evolved from experimental observation of the behaviour of glass that contains pre-existing cracks and is largely supported by physical reasoning. Chapter One presents a robust analysis of problems encountered in the field of pipeline networks and boiler components as a result of structural imperfection. Chapter Two deals with an analytical model of cracking, which is induced by thermal stresses in a porous multi-particle-matrix system. This system consists of spherical pores and isotropic spherical particles, which are both periodically distributed in an isotropic infinite matrix. Chapter Three reports on an analytical model of cracking in a multi-particle matrix system with isotropic whiskers, which are periodically distributed in an isotropic infinite matrix.
Download or read book Fatigue Life Analyses of Welded Structures written by Tom Lassen and published by John Wiley & Sons. This book was released on 2013-03-01 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: Avoiding or controlling fatigue damage is a major issue in the design and inspection of welded structures subjected to dynamic loading. Life predictions are usually used for safe life analysis, i.e. for verifying that it is very unlikely that fatigue damage will occur during the target service life of a structure. Damage tolerance analysis is used for predicting the behavior of a fatigue crack and for planning of in-service scheduled inspections. It should be a high probability that any cracks appearing are detected and repaired before they become critical. In both safe life analysis and the damage tolerance analysis there may be large uncertainties involved that have to be treated in a logical and consistent manner by stochastic modeling. This book focuses on fatigue life predictions and damage tolerance analysis of welded joints and is divided into three parts. The first part outlines the common practice used for safe life and damage tolerance analysis with reference to rules and regulations. The second part emphasises stochastic modeling and decision-making under uncertainty, while the final part is devoted to recent advances within fatigue research on welded joints. Industrial examples that are included are mainly dealing with offshore steel structures. Spreadsheets which accompany the book give the reader the possibility for hands-on experience of fatigue life predictions, crack growth analysis and inspection planning. As such, these different areas will be of use to engineers and researchers.
Download or read book Applied mechanics reviews written by and published by . This book was released on 1948 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A New Fracture Mechanics Theory of Wood written by T. A. C. M. van der Put and published by . This book was released on 2011 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The development of the singularity approach of fracture mechanics is at its dead end because it is not possible to describe real failure at the crack boundary and to replace the real failure criteria by general energy conditions and the method remains empirical. Therefore the theoretical approach based on the elliptical flat crack has to be followed, leading to the possibility to derive and explain the empirical mixed "mode 1-11" interaction equation. Because it is shown that the singularity approach does not apply for wood, the theory is based on the flat elliptical crack. This book examines a new fracture mechanics theory of wood. Further discussed: the derivation of the power-law; the energy method of notched beams and of joints loaded perpendicular to the grain; the necessary rejection of the applied crack growth models and fictitious crack models and the Weibull size effect in fracture mechanics.
