Download or read book Fragments of the Theory of Anisotropic Shells written by Serge? Aleksandrovich Ambart?sumi?an and published by World Scientific. This book was released on 1991 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: http://www.worldscientific.com/worldscibooks/10.1142/0937

Download or read book Refined Dynamical Theories of Beams Plates and Shells and Their Applications written by Isaac Elishakoff and published by Springer Science & Business Media. This book was released on 2013-03-12 with total page 439 pages. Available in PDF, EPUB and Kindle. Book excerpt: As is known, classical theories of vibration of the most fre quently encountered structural elements (e. g. , beams, plates and shells) disregard the effects of the shear deformation and rotary inertia. Refined theories, with these effects taken into account, have been pioneered by Bresse, Lord Rayleigh, Timoshenko, Eric Reissner, Mindlin and others. These refined theories have been fruitfully applied in recent decades in both theoretical and prac tical solid mechanics problems. The European Mechanics Committee approved holding EURO~illCH Colloquium 219 on "Refined Dynamical Theories of Beams, Plates and Shells and Their Applications" for reviewing the recent devel opments, providing guidelines for future investigations and presenting a forum for current work of younger researchers. The Colloquium was held during September 23 - 26, 1986, at the Uni versitat-Gesamthochschule Kassel, in the city of Kassel, Federal Republic of Germany. 45 Representatives of academia and industry, from nine European countries, as well as from Israel, USA and India participated in this Colloquium. IV 36 lectures were presented during the five sessions: Session A: Theory of Vibrations of Plates and Shells Session B: Various Approaches for Dynamical Problems of Beams Session C: Random Vibrations and Dynamic Stability Session D: Vibrations of Composite Structures Session E: Special Dynamical Problems of Beams, Plates and Shells The papers in this volums were divided into two parts: papers of invited keynote lectures and those of the invited contributed lectures.

Download or read book Asymptotic Theory Of Anisotropic Plates And Shells written by Lenser A Aghalovyan and published by World Scientific. This book was released on 2015-03-03 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: A consistent theory for thin anisotropic layered structures is developed starting from asymptotic analysis of 3D equations in linear elasticity. The consideration is not restricted to the traditional boundary conditions along the faces of the structure expressed in terms of stresses, originating a new type of boundary value problems, which is not governed by the classical Kirchhoff-Love assumptions. More general boundary value problems, in particular related to elastic foundations are also studied.The general asymptotic approach is illustrated by a number of particular problems for elastic and thermoelastic beams and plates. For the latter, the validity of derived approximate theories is investigated by comparison with associated exact solution. The author also develops an asymptotic approach to dynamic analysis of layered media composed of thin layers motivated by modeling of engineering structures under seismic excitation.

Download or read book Shell Structures Theory and Applications written by Wojciech Pietraszkiewicz and published by CRC Press. This book was released on 2013-09-18 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt: Shells are basic structural elements of modern technology and everyday life. Examples are automobile bodies, water and oil tanks, pipelines, aircraft fuselages, nanotubes, graphene sheets or beer cans. Also nature is full of living shells such as leaves of trees, blooming flowers, seashells, cell membranes, the double helix of DNA or wings of insec

Download or read book Recent Developments in Anisotropic Heterogeneous Shell Theory written by Alexander Ya. Grigorenko and published by Springer. This book was released on 2015-12-30 with total page 129 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume focuses on the relevant general theory and presents some first applications, namely those based on classical shell theory. After a brief introduction, during which the history and state-of-the-art are discussed, the first chapter presents the mechanics of anisotropic heterogeneous shells, covering all relevant assumptions and the basic relations of 3D elasticity, classical and refined shell models. The second chapter examines the numerical techniques that are used, namely discrete orthogonalization, spline-collocation and Fourier series, while the third highlights applications based on classical theory, in particular, the stress-strain state of shallow shells, non-circular shells, shells of revolution, and free vibrations of conical shells. The book concludes with a summary and an outlook bridging the gap to the second volume.

Download or read book Advances in the Theory of Plates and Shells written by George Voyiadjis and published by Elsevier. This book was released on 2013-10-22 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plates and shells play an important role in structural, mechanical, aerospace and manufacturing applications. The theory of plates and shells have advanced in the past two decades to handle more complicated problems that were previously beyond reach. In this book, the most recent advances in this area of research are documented. These include topics such as thick plate and shell analyses, finite rotations of shell structures, anisotropic thick plates, dynamic analysis, and laminated composite panels. The book is divided into two parts. In Part I, emphasis is placed on the theoretical aspects of the analysis of plates and shells, while Part II deals with modern applications. Numerous eminent researchers in the various areas of plate and shell analyses have contributed to this work which pays special attention to aspects of research such as theory, dynamic analysis, and composite plates and shells.

Download or read book Nonlinear Analysis of Shell Structures written by Anthony N. Palazotto and published by AIAA (American Institute of Aeronautics & Astronautics). This book was released on 1992 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: The increasing use of composite materials requires a better understanding of the behavior of laminated plates and shells. Large displacements and rotations, as well as shear deformations, must be included in the analysis. Since linear theories of shells and plates are no longer adequate for the analysis and design of composite structures, more refined theories are now used for such structures. This text develops, in a systematic manner, the overall concepts of the nonlinear analysis of shell structures. The authors start with a survey of theories for the analysis of plates and shells with small deflections and then lead to the theory of shells undergoing large deflections and rotations applicable to elastic laminated anisotropic materials. Subsequent chapters are devoted to the finite element solutions and include test case comparisons. The book is intended for graduate engineering students and stress analysts in aerospace, civil, or mechanical engineering.

Download or read book Elastostatics and Kinetics of Anisotropic and Heterogeneous Shell Type Structures written by Liviu Librescu and published by Springer Science & Business Media. This book was released on 1975-11-30 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book An Introduction to Nonlinear Finite Element Analysis Second Edition written by J. N. Reddy and published by OUP Oxford. This book was released on 2014-10-24 with total page 721 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of An Introduction to Nonlinear Finite Element Analysis has the same objective as the first edition, namely, to facilitate an easy and thorough understanding of the details that are involved in the theoretical formulation, finite element model development, and solutions of nonlinear problems. The book offers an easy-to-understand treatment of the subject of nonlinear finite element analysis, which includes element development from mathematical models and numerical evaluation of the underlying physics. The new edition is extensively reorganized and contains substantial amounts of new material. Chapter 1 in the second edition contains a section on applied functional analysis. Chapter 2 on nonlinear continuum mechanics is entirely new. Chapters 3 through 8 in the new edition correspond to Chapter 2 through 8 of the first edition, but with additional explanations, examples, and exercise problems. Material on time dependent problems from Chapter 8 of the first edition is absorbed into Chapters 4 through 8 of the new edition. Chapter 9 is extensively revised and it contains up to date developments in the large deformation analysis of isotropic, composite and functionally graded shells. Chapter 10 of the first edition on material nonlinearity and coupled problems is reorganized in the second edition by moving the material on solid mechanics to Chapter 12 in the new edition and material on coupled problems to the new chapter, Chapter 10, on weak-form Galerkin finite element models of viscous incompressible fluids. Finally, Chapter 11 in the second edition is entirely new and devoted to least-squares finite element models of viscous incompressible fluids. Chapter 12 of the second edition is enlarged to contain finite element models of viscoelastic beams. In general, all of the chapters of the second edition contain additional explanations, detailed example problems, and additional exercise problems. Although all of the segments are in Fortran, the logic used in these Fortran programs is transparent and can be used in Matlab or C++ versions of the same. Thus the new edition more than replaces the first edition, and it is hoped that it is acquired by the library of every institution of higher learning as well as serious finite element analysts. The book may be used as a textbook for an advanced course (after a first course) on the finite element method or the first course on nonlinear finite element analysis. A solutions manual is available on request from the publisher to instructors who adopt the book as a textbook for a course.

Download or read book Stresses in Layered Shells of Revolution written by V. Kovarik and published by Elsevier. This book was released on 2013-10-22 with total page 443 pages. Available in PDF, EPUB and Kindle. Book excerpt: Shell structures are key components in a very wide range of engineering enterprises. The theory of layered shells of revolution under the quasistatic action of loading and temperature is the subject of this book. The shells treated here are in general of an asymmetric sandwich structure. A linear theory is developed which allows for a transition to shells with less layers, that is two-layered and homogeneous structures.The first half of the book is concerned with orthotropic elastic shells. In particular, it includes the membrane theory of cylindrical, spherical and conical shells, and the bending theory of cylindrical shells, storage tanks and pressure-vessels. In each of the numerical examples considered, an attempt is made to map different regimes of structural behaviour.The second half of the book is devoted to viscoelastic shells. First the time-invariant hereditary theory is presented, describing the response of viscoelastic materials. According to the correspondence principle of this theory the actual viscoelastic shell may be replaced by a conjugate elastic one. In this way many of the results from the first half of the book can be put to good use even for viscoelastic shells. The time-dependent material characteristics are taken into account by means of the time-temperature principle.In an appendix (Part VI), the mathematical prerequisites are presented. With viscoelasticity comes the need to employ further mathematical disciplines; integral equations and integral transformations are usually encountered. Here, instead, a different concept has been chosen, the distributional concept of Laurent Schwartz, which allows many problems to be tackled in a simple formal way. In discussing the distribution theory, a level accessible to a technical reader has been maintained.The book is intended as a textbook for students and teachers of structural and aeronautical engineering. The book will also appeal to a broad range of practising engineers working in areas of aeronautical, civil, and mechanical engineering, as well as to those working for firms dealing with shell structures.

Download or read book Composite Structures 4 written by I.H. Marshall and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 648 pages. Available in PDF, EPUB and Kindle. Book excerpt: The papers contained herein were presented at the Fourth International Conference on Composite Structures (ICCS/4) held at Paisley ColIege of Technology, Scotland in July 1987. The Conference was organised and sponsored by Paisley College of Technology. It was co-sponsored by the Scottish Development Agency, the National Engineering Laboratory, the US Air Force European Office of Aerospace Research and Development and the US Army Research, Development and Standardisation Group- UK. It forms a natural and ongoing progression from the highly successful First, Second and Third International Conferences on Composite Structures (ICCS/I, ICCS/2 and ICCS/3) held at Paisley in 1981, 1983 and 1985 respectively. There is little doubt that composite materials are rightfulIy claiming a prominent role in structural engineering in the widest sense. Moreover, the range and variety of useful composites has expanded to a level inconceivable a decade ago. However, it is also true that this increasing utilisation has generated an enhanced awareness of the manifold factors which dictate the integrity of composite structures. This is indeed a healthy attitude to a relatively new dimension in structural engineering which will have an increasingly dominant role as the century progresses. Both the diversity of application of composites in structural engineering and the endeavours which wilI ensure their fitness for purpose are reflected herein.

Download or read book ICIAM 87 written by James McKenna and published by SIAM. This book was released on 1988-01-01 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Recent Developments in the Theory of Shells written by Holm Altenbach and published by Springer Nature. This book was released on 2019-09-25 with total page 799 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book commemorates the 80th birthday of Prof. W. Pietraszkiewicz, a prominent specialist in the field of general shell theory. Reflecting Prof. Pietraszkiewicz’s focus, the respective papers address a range of current problems in the theory of shells. In addition, they present other structural mechanics problems involving dimension-reduced models. Lastly, several applications are discussed, including material models for such dimension-reduced structures.

Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1974 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Shell like Structures written by Holm Altenbach and published by Springer Science & Business Media. This book was released on 2011-07-03 with total page 753 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this volume scientists and researchers from industry discuss the new trends in simulation and computing shell-like structures. The focus is put on the following problems: new theories (based on two-dimensional field equations but describing non-classical effects), new constitutive equations (for materials like sandwiches, foams, etc. and which can be combined with the two-dimensional shell equations), complex structures (folded, branching and/or self intersecting shell structures, etc.) and shell-like structures on different scales (for example: nano-tubes) or very thin structures (similar to membranes, but having a compression stiffness). In addition, phase transitions in shells and refined shell thermodynamics are discussed. The chapters of this book are the most exciting contributions presented at the EUROMECH 527 Colloquium “Shell-like structures: Non-classical Theories and Applications” held in Wittenberg, Germany.

Download or read book Design Aids for Stiffened Composite Shells with Cutouts written by Sarmila Sahoo and published by Springer. This book was released on 2016-09-16 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the free vibrations of graphite-epoxy laminated composite stiffened shells with cutout both in terms of the natural frequencies and mode shapes. The dynamic analysis of shell structures, which may have complex geometry and arbitrary loading and boundary conditions, is solved efficiently by the finite element method, even including cutouts in shells. The results may be readily used by practicing engineers dealing with stiffened composite shells with cutouts. Several shell forms viz. cylindrical shell, hypar shell, conoidal shell, spherical shell, saddle shell, hyperbolic paraboloidal shell and elliptic paraboloidal shell are considered in the book. The dynamic characteristics of stiffened composite shells with cutout are described in terms of the natural frequency and mode shapes. The size of the cutouts and their positions with respect to the shell centre are varied for different edge constraints of cross-ply and angle-ply laminated composite shells. The effects of these parametric variations on the fundamental frequencies and mode shapes are considered in detail. The information regarding the behavior of stiffened shells with cutouts for a wide spectrum of eccentricity and boundary conditions for cross ply and angle ply shells may be used as design aids for structural engineers. The book is a significant contribution to the existing literature from the point of view of both industrial importance and academic interest.

Download or read book Mechanics of Textile and Laminated Composites written by A. Bogdanovich and published by Springer Science & Business Media. This book was released on 1996-08-31 with total page 594 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanics of Textile and Laminated Composites is in three parts. The first part (Chapters 1 and 2) covers the fundamental issues of 3-D theory of elasticity and presents the theory of elasticity of an anisotropic body with comprehensive analysis of its specific cases. The second part (Chapters 3-5) presents the theoretical and experimental characterization of the elastic properties of unidirectional, textile and layered composite materials. The final part (Chapters 6 and 7) addresses the problems of 3-D stress analysis in laminated and textile composite structures. Major emphasis is placed on textile composites, perhaps the most complex and at the same time most promising group of composite materials. One of the most important features of this book is that it provides accurate and efficient 3-D analysis of laminated and textile reinforced structures, using novel methods. It has become more and more evident in recent years that, in many practical design situations, such full-scale 3-D analyses are required. Researchers, designers and engineers working with composite materials and structures will find this book an invaluable addition to their libraries.