Download or read book Materials Design and Manufacturing for Sustainable Environment written by Santhakumar Mohan and published by Springer Nature. This book was released on 2021-02-06 with total page 909 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises the select proceedings of the International Conference on Materials, Design and Manufacturing for Sustainable Environment (ICMDMSE 2020). The primary focus is on emerging materials and cutting-edge manufacturing technologies for sustainable environment. The book covers a wide range of topics such as advanced materials, vibration, tribology, finite element method (FEM), heat transfer, fluid mechanics, energy engineering, additive manufacturing, robotics and automation, automobile engineering, industry 4.0, MEMS and nanotechnology, optimization techniques, condition monitoring, and new paradigms in technology management. Contents of this book will be useful to students, researchers, and practitioners alike.
Download or read book Copper and Bronze in Art written by David A. Scott and published by Getty Publications. This book was released on 2002 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a review of 190 years of literature on copper and its alloys. It integrates information on pigments, corrosion and minerals, and discusses environmental conditions, conservation methods, ancient and historical technologies.
Download or read book Rock Engineering written by Arild Palmstrom and published by ICE Publishing. This book was released on 2014-12-19 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rock Engineering is a valuable reference tool for geotechnical engineers, geologists, consultants, contractors, and advanced students on rock engineering and engineering geology courses.
Download or read book Advances in Manufacturing and Industrial Engineering written by Ranganath M. Singari and published by Springer Nature. This book was released on 2021-01-13 with total page 1180 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents selected peer reviewed papers from the International Conference on Advanced Production and Industrial Engineering (ICAPIE 2019). It covers a wide range of topics and latest research in mechanical systems engineering, materials engineering, micro-machining, renewable energy, industrial and production engineering, and additive manufacturing. Given the range of topics discussed, this book will be useful for students and researchers primarily working in mechanical and industrial engineering, and energy technologies.
Download or read book Gas Turbine Engineering Handbook written by Meherwan P. Boyce and published by Elsevier. This book was released on 2017-09-01 with total page 956 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Gas Turbine Engineering Handbook has been the standard for engineers involved in the design, selection, and operation of gas turbines. This revision includes new case histories, the latest techniques, and new designs to comply with recently passed legislation. By keeping the book up to date with new, emerging topics, Boyce ensures that this book will remain the standard and most widely used book in this field. The new Third Edition of the Gas Turbine Engineering Hand Book updates the book to cover the new generation of Advanced gas Turbines. It examines the benefit and some of the major problems that have been encountered by these new turbines. The book keeps abreast of the environmental changes and the industries answer to these new regulations. A new chapter on case histories has been added to enable the engineer in the field to keep abreast of problems that are being encountered and the solutions that have resulted in solving them. - Comprehensive treatment of Gas Turbines from Design to Operation and Maintenance. In depth treatment of Compressors with emphasis on surge, rotating stall, and choke; Combustors with emphasis on Dry Low NOx Combustors; and Turbines with emphasis on Metallurgy and new cooling schemes. An excellent introductory book for the student and field engineers - A special maintenance section dealing with the advanced gas turbines, and special diagnostic charts have been provided that will enable the reader to troubleshoot problems he encounters in the field - The third edition consists of many Case Histories of Gas Turbine problems. This should enable the field engineer to avoid some of these same generic problems
Download or read book Advances in Applied Mechanical Engineering written by Hari Kumar Voruganti and published by Springer Nature. This book was released on 2020-02-01 with total page 1161 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents select peer reviewed proceedings of the International Conference on Applied Mechanical Engineering Research (ICAMER 2019). The books examines various areas of mechanical engineering namely design, thermal, materials, manufacturing and industrial engineering covering topics like FEA, optimization, vibrations, condition monitoring, tribology, CFD, IC engines, turbo-machines, automobiles, manufacturing processes, machining, CAM, additive manufacturing, modelling and simulation of manufacturing processing, optimization of manufacturing processing, supply chain management, and operations management. In addition, recent studies on composite materials, materials characterization, fracture and fatigue, advanced materials, energy storage, green building, phase change materials and structural change monitoring are also covered. Given the contents, this book will be useful for students, researchers and professionals working in mechanical engineering and allied fields.
Download or read book Underground Excavations in Rock written by E.T. Brown and published by CRC Press. This book was released on 1980-06-30 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: Underground Excavations in Rock deals with the geotechnical aspects of the design of underground openings for mining and civil engineering processes.
Download or read book Out Of Control written by Kevin Kelly and published by Basic Books. This book was released on 2009-04-30 with total page 666 pages. Available in PDF, EPUB and Kindle. Book excerpt: Out of Control chronicles the dawn of a new era in which the machines and systems that drive our economy are so complex and autonomous as to be indistinguishable from living things.
Download or read book Materials and Processes written by Barrie D. Dunn and published by Springer. This book was released on 2015-12-29 with total page 677 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of this book is to assist scientists and engineers select the ideal material or manufacturing process for particular applications; these could cover a wide range of fields, from light-weight structures to electronic hardware. The book will help in problem solving as it also presents more than 100 case studies and failure investigations from the space sector that can, by analogy, be applied to other industries. Difficult-to-find material data is included for reference. The sciences of metallic (primarily) and organic materials presented throughout the book demonstrate how they can be applied as an integral part of spacecraft product assurance schemes, which involve quality, material and processes evaluations, and the selection of mechanical and component parts. In this successor edition, which has been revised and updated, engineering problems associated with critical spacecraft hardware and the space environment are highlighted by over 500 illustrations including micrographs and fractographs. Space hardware captured by astronauts and returned to Earth from long durations in space are examined. Information detailed in the Handbook is applicable to general terrestrial applications including consumer electronics as well as high reliability systems associated with aeronautics, medical equipment and ground transportation. This Handbook is also directed to those involved in maximizing the relia bility of new materials and processes for space technology and space engineering. It will be invaluable to engineers concerned with the construction of advanced structures or mechanical and electronic sub-systems.
Download or read book Fatigue and Fracture written by F. C. Campbell and published by ASM International. This book was released on 2012-01-01 with total page 699 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This book emphasizes the physical and practical aspects of fatigue and fracture. It covers mechanical properties of materials, differences between ductile and brittle fractures, fracture mechanics, the basics of fatigue, structural joints, high temperature failures, wear, environmentally-induced failures, and steps in the failure analysis process."--publishers website.
Download or read book Nickel and Its Alloys written by Samuel Jacob Rosenberg and published by . This book was released on 1968 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Materials Selection in Mechanical Design written by M. F. Ashby and published by Pergamon. This book was released on 1992-01-01 with total page 311 pages. Available in PDF, EPUB and Kindle. Book excerpt: New materials enable advances in engineering design. This book describes a procedure for material selection in mechanical design, allowing the most suitable materials for a given application to be identified from the full range of materials and section shapes available. A novel approach is adopted not found elsewhere. Materials are introduced through their properties; materials selection charts (a new development) capture the important features of all materials, allowing rapid retrieval of information and application of selection techniques. Merit indices, combined with charts, allow optimisation of the materials selection process. Sources of material property data are reviewed and approaches to their use are given. Material processing and its influence on the design are discussed. The book closes with chapters on aesthetics and industrial design. Case studies are developed as a method of illustrating the procedure and as a way of developing the ideas further.
Download or read book Project Management for Mining 2nd Edition written by Robin J. Hickson and published by Society for Mining, Metallurgy & Exploration. This book was released on 2022-02-01 with total page 782 pages. Available in PDF, EPUB and Kindle. Book excerpt: Before You Put the First Shovel in the Ground—This Book Could Be the Difference Between a Successful Mining Operation and a Money Pit Opening a successful new mine is a vastly complex undertaking, entailing several years and millions to billions of dollars. In today’s world, when environmental and labor policies, regulatory compliance, and the impact of the community must be factored in, you cannot afford to make a mistake. The Society for Mining, Metallurgy & Exploration has created this road map for you. Written by two hands-on, in-the-trenches mining project managers with decades of experience bringing some of the world’s most successful, profitable mines into operation on time, within budget, and ethically, Project Management for Mining gives you step-by-step instructions in every process you are likely to encounter. It is in use as course material in universities in Australia, Canada, Colombia, Ghana, Iran, Kazakhstan, Peru, Russia, Saudi Arabia, South Africa, the United Kingdom, as well as the United States. In addition, more than 100 different mining companies have sent employees to attend seminars conducted by authors Robin Hickson and Terry Owen, sessions all based around the material within this book. In the years following the first edition, the authors gratefully received a bevy of excellent suggestions from some 2,000 readers in over 50 countries. This helpful reader feedback, coupled with written evaluations from the more than 400 seminar attendees, has been an unparalleled source of improvement for this new book. This second edition is a significant accomplishment that includes 5 new chapters, substantial updates to the original 34 chapters, and 56 new or updated figures, flowcharts, and checklists that every project manager can use.
Download or read book Recent Advances in Mechanical Engineering written by Anil Kumar (Engineer) and published by . This book was released on 2021 with total page 1161 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the select proceedings of the second International Conference on Recent Advances in Mechanical Engineering (RAME 2020). The topics covered include aerodynamics and fluid mechanics, automation, automotive engineering, composites, ceramics and polymers processing, computational mechanics, failure and fracture mechanics, friction, tribology and surface engineering, heating and ventilation, air conditioning system, industrial engineering, IC engines, turbomachinery and alternative fuels, machinability and formability of materials, mechanisms and machines, metrology and computer-aided inspection, micro- and nano-mechanics, modelling, simulation and optimization, product design and development, rapid manufacturing technologies and prototyping, solid mechanics and structural mechanics, thermodynamics and heat transfer, traditional and non-traditional machining processes, vibration and acoustics. The book also discusses various energy-efficient renewable and non-renewable resources and technologies, strategies and technologies for sustainable development and energy & environmental interaction. The book is a valuable reference for beginners, researchers, and professionals interested in sustainable construction and allied fields.
Download or read book The Mechanical Design Process written by David G. Ullman and published by McGraw-Hill Companies. This book was released on 2003 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: Publisher Description
Download or read book Coatings Technology Handbook written by Arthur A. Tracton and published by CRC Press. This book was released on 2005-07-28 with total page 930 pages. Available in PDF, EPUB and Kindle. Book excerpt: Serving as an all-in-one guide to the entire field of coatings technology, this encyclopedic reference covers a diverse range of topics-including basic concepts, coating types, materials, processes, testing and applications-summarizing both the latest developments and standard coatings methods. Take advantage of the insights and experience of over
Download or read book Lost Enlightenment written by S. Frederick Starr and published by Princeton University Press. This book was released on 2015-06-02 with total page 694 pages. Available in PDF, EPUB and Kindle. Book excerpt: The forgotten story of Central Asia's enlightenment—its rise, fall, and enduring legacy In this sweeping and richly illustrated history, S. Frederick Starr tells the fascinating but largely unknown story of Central Asia's medieval enlightenment through the eventful lives and astonishing accomplishments of its greatest minds—remarkable figures who built a bridge to the modern world. Because nearly all of these figures wrote in Arabic, they were long assumed to have been Arabs. In fact, they were from Central Asia—drawn from the Persianate and Turkic peoples of a region that today extends from Kazakhstan southward through Afghanistan, and from the easternmost province of Iran through Xinjiang, China. Lost Enlightenment recounts how, between the years 800 and 1200, Central Asia led the world in trade and economic development, the size and sophistication of its cities, the refinement of its arts, and, above all, in the advancement of knowledge in many fields. Central Asians achieved signal breakthroughs in astronomy, mathematics, geology, medicine, chemistry, music, social science, philosophy, and theology, among other subjects. They gave algebra its name, calculated the earth's diameter with unprecedented precision, wrote the books that later defined European medicine, and penned some of the world's greatest poetry. One scholar, working in Afghanistan, even predicted the existence of North and South America—five centuries before Columbus. Rarely in history has a more impressive group of polymaths appeared at one place and time. No wonder that their writings influenced European culture from the time of St. Thomas Aquinas down to the scientific revolution, and had a similarly deep impact in India and much of Asia. Lost Enlightenment chronicles this forgotten age of achievement, seeks to explain its rise, and explores the competing theories about the cause of its eventual demise. Informed by the latest scholarship yet written in a lively and accessible style, this is a book that will surprise general readers and specialists alike.
