Download or read book A Practical Manual On Geology And Soils written by A. S. Mailappa and published by New India Publishing Agency. This book was released on 2021-02-09 with total page 4 pages. Available in PDF, EPUB and Kindle. Book excerpt: Soil Science is a unique discipline concerning a complex material that is part of many natural and utilitarian systems. Geology is the applied discipline of science and is now established as an interdisciplinary subject within agriculture, soil and environmental science as the agriculturists and soil /environmental scientists heavily require geological knowledge and information to apply in the field. This book is a easy ready reckoner cum reference on geology and soils for the undergraduate students of Agriculture, Horticulture and Forestry. The author has presented his academic & professional experience and conception on all aspects of geology and soils, and the book is written in a very simpler and lucid manner. This book is primarily intended for the students and scientists associated with agriculture and allied disciplines, for having a better understanding, a prerequisite for progressing ahead in acquiring in-depth knowledge on the application aspects of soil science in relation to crop growth.

Download or read book Soil and Rock Description in Engineering Practice written by David Norbury and published by CRC Press. This book was released on 2010 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by an acknowledged expert, this is a practical guide to the engineering geological description of soils and rocks in the field.

Download or read book Practical Handbook of Soil Vadose Zone and Ground Water Contamination written by J. Russell Boulding and published by CRC Press. This book was released on 2016-04-19 with total page 718 pages. Available in PDF, EPUB and Kindle. Book excerpt: A synthesis of years of interdisciplinary research and practice, the second edition of this bestseller continues to serve as a primary resource for information on the assessment, remediation, and control of contamination on and below the ground surface. Practical Handbook of Soil, Vadose Zone, and Ground-Water Contamination: Assessment, Prev

Download or read book Geologic Maps written by Edgar W. Spencer and published by Waveland Press. This book was released on 2017-10-20 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geologic maps supply a wealth of information about the surface and shallow subsurface of the earth. The types of materials that are present in a location and the three-dimensional structure of the bedrock both can be gleaned from a clearly prepared geologic map. Geologists, civil and environmental engineers, land-use planners, soil scientists, and geographers commonly use geologic maps as a source of information to facilitate problem solving and identify the qualities of a region. Maps reveal the position of many types of natural hazards, indicate the suitability of the land surface for various uses, reveal problems that may be encountered in excavation, provide clues to the natural processes that shape an area, and help locate important natural resources. Suitable for lab courses in structural geology as well as field geology work, Spencer describes representative examples of features found on geologic maps and outlines procedures for interpretation and projection. Geometric techniques are explained using a step-by-step approach. Coverage of mapping methods includes tools that provide necessary data, such as Google Earth, GPS, GIS, LiDAR maps, drones, and aerial photographs. Challenging and engaging exercises throughout the text involve students in the mapping process and stimulate an appreciation of the extent and precision of information presented in geologic maps. Regional geology is an important component of lab and field mapping projects. As such, the Third Edition includes new maps of the Gulf of Mexico Coastal Plain, Rocky Mountain Front Range, Yellowstone region, Moab, Utah, Shenandoah National Park, and Hawai’i. A new chapter devoted to tectonic maps also broadens students’ exposure. Ed Spencer brings over 45 years of teaching experience to the text along with valuable insight and clarity into the interpretation and preparation of geologic maps.

Download or read book Engineering Properties of Soils and Their Measurement written by Joseph E. Bowles and published by McGraw-Hill Companies. This book was released on 1978 with total page 446 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Practical Handbook of Grouting written by James Warner and published by John Wiley & Sons. This book was released on 2004-04-05 with total page 734 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first complete handbook for every aspect of grouting technology The Practical Handbook of Grouting offers the most comprehensive, single-source reference covering all facets of grouting technology, including its application for control of water movement, strengthening of both soil and rock, and a wide range of structural applications. Richly illustrated with hundreds of informative photographs, graphs, and figures, this handbook provides invaluable advice on all stages of a project from initial investigation and design, through execution, monitoring, and quality control. Broad coverage in the Practical Handbook of Grouting begins with a general overview of the topic and includes design and quality control issues, injection techniques, and a thorough discussion of drilling and grouting equipment, with practical focus on building custom equipment. Enriched with real-world insights from the author, the Practical Handbook of Grouting features the latest information on: * Cementitious and noncementitious grouts, including new admixtures and polymers * Special construction requirements, including grouting inside structures, underground spaces, in extreme environments, and for emergency response support * Grouting equipment, including pumps, mixers, agitators, and delivery and monitoring systems * Pump mechanics, including the advantages and limitations of all pump types * "The Games Contractors Play," including marketing efforts, proposal trickery, on-the-job issues, and defending bad work Complete with an extensive bibliography and references, the Practical Handbook of Grouting is a valuable resource for civil, structural, and geotechnical engineers, geologists, contractors, and students in related fields.

Download or read book Physical Geology written by Steven Earle and published by . This book was released on 2016-08-12 with total page 628 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a discount Black and white version. Some images may be unclear, please see BCCampus website for the digital version.This book was born out of a 2014 meeting of earth science educators representing most of the universities and colleges in British Columbia, and nurtured by a widely shared frustration that many students are not thriving in courses because textbooks have become too expensive for them to buy. But the real inspiration comes from a fascination for the spectacular geology of western Canada and the many decades that the author spent exploring this region along with colleagues, students, family, and friends. My goal has been to provide an accessible and comprehensive guide to the important topics of geology, richly illustrated with examples from western Canada. Although this text is intended to complement a typical first-year course in physical geology, its contents could be applied to numerous other related courses.

Download or read book Geological and Soil Evidence written by Kenneth Pye and published by CRC Press. This book was released on 2007-04-19 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: The forensic potential of geological and soil evidence has been recognized for more than a century, but recently these types of evidence are used much more widely as an investigative intelligence tool and as evidence in court. There is, however, still a poor understanding of the potential value and the limitations of geological and soil evidence am

Download or read book Laboratory Manual for Introductory Geology written by Bradley Deline and published by . This book was released on 2016-01-05 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: Developed by three experts to coincide with geology lab kits, this laboratory manual provides a clear and cohesive introduction to the field of geology. Introductory Geology is designed to ease new students into the often complex topics of physical geology and the study of our planet and its makeup. This text introduces readers to the various uses of the scientific method in geological terms. Readers will encounter a comprehensive yet straightforward style and flow as they journey through this text. They will understand the various spheres of geology and begin to master geological outcomes which derive from a growing knowledge of the tools and subjects which this text covers in great detail.

Download or read book Correlations of Soil and Rock Properties in Geotechnical Engineering written by Jay Ameratunga and published by Springer. This book was released on 2015-12-11 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a one-stop reference to the empirical correlations used extensively in geotechnical engineering. Empirical correlations play a key role in geotechnical engineering designs and analysis. Laboratory and in situ testing of soils can add significant cost to a civil engineering project. By using appropriate empirical correlations, it is possible to derive many design parameters, thus limiting our reliance on these soil tests. The authors have decades of experience in geotechnical engineering, as professional engineers or researchers. The objective of this book is to present a critical evaluation of a wide range of empirical correlations reported in the literature, along with typical values of soil parameters, in the light of their experience and knowledge. This book will be a one-stop-shop for the practising professionals, geotechnical researchers and academics looking for specific correlations for estimating certain geotechnical parameters. The empirical correlations in the forms of equations and charts and typical values are collated from extensive literature review, and from the authors' database.

Download or read book Biotechnical and Soil Bioengineering Slope Stabilization written by Donald H. Gray and published by John Wiley & Sons. This book was released on 1996-08-23 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first comprehensive, practical guide to the selection,construction, and installation of soil bioengineering andbiotechnical slope protection Here is the ultimate guide to physically attractive,environmentally compatible, and cost-effective methods ofprotecting slopes from erosion and mass wasting. Lavishlyillustrated with more than 150 photographs and supplemented withscores of charts and tables, this book covers the entire subjectfrom general principles and background on the nature of soilerosion and mass movement to detailed information on rootstrengths, treatment selection, unit costs, critical tractivestresses, methods for harvesting and handling live cuttings, andmore. Four illustrated case studies, each addressing a different set ofproblems and solutions, demonstrate both the application ofparticular technologies and the site investigation, planning,scheduling, and organization required to complete these projectssuccessfully. This unique reference handbook * Reviews the horticultural and engineering underpinnings forbiotechnical and soil engineering treatments * Documents and explains the role of woody plants in stabilizingslopes against both surficial erosion and mass movement * Provides details on a broad range of soil bioengineering methods,including live staking, live fascines, brushlayering, live cribwalls, branchpacking, and live slope gratings * Describes various biotechnical methods and materials, includingthe incorporation of vegetation in erosion control blankets,flexible mats, cellular revetments (geocells), rock armor (riprap), and gabion and open-front crib walls * Summarizes the findings of the National ScienceFoundation-sponsored workshop to assess the state of the art anddetermine research needs For practicing professionals, researchers, and students ingeotechnical engineering, geology, soil science, forestry andforest engineering, landscape architecture, environmentalhorticulture, and restoration ecology, this book offers thorough,up-to-date coverage that is not available from any other singlesource.

Download or read book Manual of Soil Laboratory Testing Soil Classification and Compaction Testing written by K. H. Head and published by John Wiley & Sons. This book was released on 1980-07-16 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Foundation Engineering Handbook written by Hsai-Yang Fang and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 935 pages. Available in PDF, EPUB and Kindle. Book excerpt: More than ten years have passed since the first edition was published. During that period there have been a substantial number of changes in geotechnical engineering, especially in the applications of foundation engineering. As the world population increases, more land is needed and many soil deposits previously deemed unsuitable for residential housing or other construction projects are now being used. Such areas include problematic soil regions, mining subsidence areas, and sanitary landfills. To overcome the problems associated with these natural or man-made soil deposits, new and improved methods of analysis, design, and implementation are needed in foundation construction. As society develops and living standards rise, tall buildings, transportation facilities, and industrial complexes are increasingly being built. Because of the heavy design loads and the complicated environments, the traditional design concepts, construction materials, methods, and equipment also need improvement. Further, recent energy and material shortages have caused additional burdens on the engineering profession and brought about the need to seek alternative or cost-saving methods for foundation design and construction.

Download or read book Groundwater Lowering in Construction written by Pat M. Cashman and published by CRC Press. This book was released on 2020-08-10 with total page 843 pages. Available in PDF, EPUB and Kindle. Book excerpt: Praise for the Second Edition: "This is the book that the dewatering sector really needs – it is reliably based on sound theory and profound understanding of the physical processes, yet is presented in a very accessible and user-friendly manner. It draws on many, many decades of experience, and yet is utterly up to date. . . . It is a one-stop shop for the dewatering practitioner – who can nonetheless rest assured that the theoretical basis of the methods presented is flawless." — Professor Paul L. Younger, FGS, FICE, C.Geol., C.Eng., FREng, University of Glasgow, Scotland, UK "The best reference on this topic available . . . and will prove useful to a wide variety of readers ranging from junior construction engineers or dewatering contractors to theoretical hydrogeologists and environmental managers. It is rare that a book is able to bridge the gap between theoretical design guidance and practical application." — S.N. Sterling, University of Waterloo, Canada The extensively updated Groundwater Lowering in Construction: A Practical Guide to Dewatering, 3rd Edition offers practical advice on all phases of groundwater control systems, from planning and design, through installation and maintenance, and ultimately decommissioning. The expertise provided in this book can help you improve working conditions, increase project viability, save time and reduce excavation costs. Designers and managers of construction and engineering projects are given the tools necessary to effectively control groundwater. The content is divided into three sections – Principles, Design and Construction. The Principles section explains the fundamentals of groundwater flow as it relates to civil engineering excavations. The Design section explores in extensive detail site investigation, permeability assessment methods and groundwater control strategies. Chapters in the Construction section describe dewatering and exclusion techniques, and examine the complete life cycle of a groundwater control scheme, including monitoring, maintenance and decommissioning. This section incorporates eleven case histories from the authors’ casebook. The 3rd edition has been greatly revised and updated, and contains more than 200 new illustrations. The new content covers: Permeability of soils and rocks Groundwater problems for excavations in rock Groundwater control for tunnelling projects, such as shafts and cross passages Methods for assessing permeability Decommissioning of dewatering systems Optimisation of groundwater control schemes. The new, expanded content offers valuable direction that can give you a true competitive advantage in the planning and execution of temporary and permanent dewatering works for excavation and tunnelling. Written for practising engineers, geologists and construction managers, as well as postgraduate engineering students, this revamped manual on design and practice presents numerous case studies and extensive references to enhance understanding. Martin Preene is a groundwater consultant, based in the UK. He has more than 30 years’ experience working on dewatering and groundwater control projects worldwide. The late Pat Cashman was the leading British exponent of groundwater control for his generation, championing a practical and straightforward approach for more than forty years.

Download or read book Engineering Geology written by F G Bell and published by Elsevier. This book was released on 2007-02-14 with total page 593 pages. Available in PDF, EPUB and Kindle. Book excerpt: Every engineering structure, whether it's a building, bridge or road, is affected by the ground on which it is built. Geology is of fundamental importance when deciding on the location and design of all engineering works, and it is essential that engineers have a basic knowledge of the subject. Engineering Geology introduces the fundamentals of the discipline and ensures that engineers have a clear understanding of the processes at work, and how they will impact on what is to be built. Core areas such as stratigraphy, rock types, structures and geological processes are explained, and put in context. The basics of soil mechanics and the links between groundwater conditions and underlying geology are introduced. As well as the theoretical knowledge necessary, Professor Bell introduces the techniques that engineers will need to learn about and understand the geological conditions in which they intend to build. Site investigation techniques are detailed, and the risks and risk avoidance methods for dealing with different conditions are explained. - Accessible introduction to geology for engineers - Key points illustrated with diagrams and photographs - Teaches the impact of geology on the planning and design of structures

Download or read book Tropical Residual Soils Engineering written by B.B.K. Huat and published by CRC Press. This book was released on 2004-06-15 with total page 447 pages. Available in PDF, EPUB and Kindle. Book excerpt: Focused on tropical areas and their unique problems and issues, this work examines all aspects of residual soils engineering, including both theoretical and practical aspects. This book gives the practitioner a thorough understanding of the characteristics of these soil types, their formation and their material properties, while guidelines on appli

Download or read book Civil Engineer s Reference Book written by L S Blake and published by CRC Press. This book was released on 1994-03-21 with total page 1242 pages. Available in PDF, EPUB and Kindle. Book excerpt: After an examination of fundamental theories as applied to civil engineering, authoritative coverage is included on design practice for certain materials and specific structures and applications. A particular feature is the incorporation of chapters on construction and site practice, including contract management and control.