Download or read book A Practical Guide to the Selection of High Temperature Engineering Thermoplastics written by A.A. Collyer and published by Elsevier. This book was released on 2016-01-22 with total page 110 pages. Available in PDF, EPUB and Kindle. Book excerpt: Helps the individual without formal training in plastic materials through the maze of materials selection to his final goal. Those with a basic knowledge of this area will benefit from the more practical aspects of the guide.
Download or read book Thermoplastic Material Selection written by Eric R. Larson and published by William Andrew. This book was released on 2015-04-30 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermoplastic Material Selection: A Practical Guide presents current information on how proper material selection is a critical component of any manufactured product. The text is a practical guide to a difficult process, giving the reader a fundamental grounding in thermoplastic materials and providing the tools they need to save time, money, and frustration. The book provides an overview of the most commonly used thermoplastic materials, including discussions of the different chemical families, plastics categories, and material grades - and the implications of these differences on the material selection process. It provides fresh insights on the traditional methods of material selection based on performance and cost, and also discusses the use of non-traditional methods based on subjective evaluation. Subsequent sections include references on tools that can be used to conduct further exploration, how to accurately select the most suitable material, writing an effective material specification, and working with material suppliers and distributors. Presents current information on how proper thermoplastics material selection is a critical component of any manufactured product A practical guide to a difficult process, giving the reader a fundamental grounding in thermoplastics material selection and providing the tools they need to save time, money, and frustration Delivers insights on the traditional methods of material selection based on performance and cost, and introduces nontraditional methods based on size, form, appearance, and feel
Download or read book Practical Guide to High Performance Engineering Plastics written by David J Kemmish and published by Smithers Rapra. This book was released on 2011-07-30 with total page 136 pages. Available in PDF, EPUB and Kindle. Book excerpt: High performance engineering plastics are used in a vast range of applications and environments. They are becoming increasingly important because of trends towards more reliable and higher performance machines and devices. This book gives readers a working knowledge and understanding of high performance engineering plastics. It starts with a simple, practical overview of key properties and principles. In each of the chapters there are sections on production chemistry, product forms, properties, processing and applications. There is a strong bias towards materials and concepts which are used in practice. The materials covered include high performance Polyethersulfones, Polyetherimides, Polyphthalamides, Polyphenylene Sulfide, Polyaryletherketones, Polyamideimides, Polyimides, Polybenzimidazole, Liquid Crystalline Polyesters and Perfluoropolymers. The reader will develop the ability to understand why materials are chosen for certain applications, why those materials have particular properties and how those properties can be modified. This will facilitate conversations with both materials suppliers and end users. It will help to identify the best and most cost effective solutions.
Download or read book Plastics Materials written by J A Brydson and published by Elsevier. This book was released on 2013-10-22 with total page 925 pages. Available in PDF, EPUB and Kindle. Book excerpt: The sixth edition of this classic reference work continues to provide a balanced and comprehensive overview of the nature, manufacture, structure, properties, processing and applications of commercially available plastics materials. Aiming to bridge the gap between theory and practice, it enables scientists to understand the commercial implications of their work as well as providing technologists with a theoretical background.Early chapters describe the history and nature of plastics and explain the relationship of chemical structure and properties. Preparation, structure, properties processing and applications of each class of plastics materials are then considered separately. New chapters have been added on materials selection and special polymers, including biodegradable and electroconductive polymers and thermoplastic elastomers. In addition many new plastics materials have been added throughout the text and more information has been included on testing methods and data. The sections on production/consumption statistics has also been completely updated. Reviews of previous editions:It's a genuine milestone in reference works...and the book is a 'must' for anyone concerned with the selection, preparation, compounding or processing of these materials' - British Plastic and Rubber 'This latest edition maintains the high standard set previously... The book s a 'must' for both student and practising technologists' - Plastics Materials'The fourth edition of John Brydson's book carries on the splendid traditions of the previous three. As a reference book for a laboratory, sales office or student's bedroom, it is unrivalled in its comprehensive of the history, chemistry and technology of plastics'. - Reinforced Plastics 'As a reference book on the subject it is unique for its depth in such a compact form, yet allied to that it is so eminently readable. It is a working chemist's book for a working chemist.' - Journal of the Oil and Colour Chemists Association 'This is one of the most comprehensive reference books in its class.' - Polymer News, March 1996
Download or read book Material Selection for Thermoplastic Parts written by Michel Biron and published by William Andrew. This book was released on 2015-09-02 with total page 712 pages. Available in PDF, EPUB and Kindle. Book excerpt: As new applications are developed and plastics replace traditional materials in a widening spectrum of existing applications, the potential personal injury, property damage, financial and legal consequences of failure can be high. However, nearly half of plastics failure can be traced back to the original specification and selection of the material. This book gives engineers the data they need to make an informed decision about the materials they use in their products, imparting a thorough knowledge of the advantages and disadvantages of the various materials to choose from. The data also suggests other candidate materials which the reader may not have originally considered. More than 30,000 thermoplastics grades are grouped into circa. 300 subfamilies, within which over 20 properties are assessed. The abundance or scarcity of a material and its cost are also often important deciding factors. In this book, an economical overview of the plastics industry helps clarify the actual consumption and costs of thermoplastics including bioplastic, and the relationship of cost vs. performance is also examined for each thermoplastic subfamily. Immediate and long-term common properties are reviewed, including mechanical behavior, impact, thermal properties, and many more. Environmental considerations are also covered, including ease of recycling and sustainability. Helps engineers to implement a systematic approach to material selection in their work Includes more than 300 subfamilies of thermoplastic, and a wide range of properties including chemical resistance, thermal degradation, creep and UV resistance Evaluates cost/performance relations and environmental considerations
Download or read book Rheology and Processing of Liquid Crystal Polymers written by Domenico Acierno and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 331 pages. Available in PDF, EPUB and Kindle. Book excerpt: Liquid crystal polymers (LCPs) have many strange properties that may be utilized to advantage in the processing of products made from them and their blends with isotropic polymers. This volume (volume 2 in the series Polymer Liquid Crystals) deals with their strange flow behaviour and the models put forward to explain the phenomena that occur in such polymers and their blends. It has been known for some time that small ad ditions of a thermotropic LCP to isotropic polymers not only gives an improvement in the strength and stiffness of the blend but improves the processability of the blend over that of the isotropic polymer. In the case of lyotropic LCPs, it is possible to create a molecular composite in which the reinforcement of an isotropic polymer is achieved at a molecular level by the addition of the LCP in a common solvent. If the phenomena can be fully understood both the reinforcement and an increase in the proces sability of isotropic polymers could be optimized. This book is intended to illustrate the current theories associated with the flow of LCPs and their blends in the hope that such an optimization will be achieved by future research. Chapter 1 introduces the subject of LCPs and describes the ter minology used; Chapter 2 then discusses the more complex phenomena associated with these materials. In Chapter 3, the way in which these phe nomena may be modelled using hamiltonians is fully covered.
Download or read book A Practical Guide to Plastics Sustainability written by Michel Biron and published by William Andrew. This book was released on 2020-04-18 with total page 691 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Practical Guide to Plastics Sustainability: Concept, Solutions, and Implementation is a groundbreaking reference work offering a broad, detailed and highly practical vision of the complex concept of sustainability in plastics. The book's aim is to present a range of potential pathways towards more sustainable plastics parts and products, enabling the reader to further integrate the idea of sustainability into their design process. It begins by introducing the context and concept of sustainability, discussing perceptions, drivers of change, key factors, and environmental issues, before presenting a detailed outline of the current situation with types of plastics, processing, and opportunities for improved sustainability. Subsequent chapters focus on the different possibilities for improved sustainability, offering a step-by-step technical approach to areas including design, properties, renewable plastics, and recycling and re-use. Each of these pillars are supported by data, examples, analysis and best practice guidance. Finally, the latest developments and future possibilities are considered. Approaches the idea of sustainability from numerous angles, offering practical solutions to improve sustainability in the development of plastic components and products Explains how sustainability can be applied across plastics design, materials selection, processing, and end of life, all set alongside socioeconomic factors Considers key areas of innovation, such as eco-design, novel opportunities for recycling or re-use, bio-based polymers and new technologies
Download or read book Practical Guide to Water Blown Cellular Polymers written by Chris Defonseka and published by Smithers Rapra. This book was released on 2016-05-10 with total page 183 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cellular polymers or foamed polymers are an important branch of plastics and are an essential part of daily life. Some of the major sectors of use are bedding, automotive, building construction, furniture, sound/thermal insulation, and packaging.Due to growing global concerns with regard to air pollution, research has led to the fascinating concept of using water as the sole blowing agent to create cellular foams as an alternative to traditional petroleum-based blowing agents (which contribute to air pollution). This strategy has created other possibilities of better and safer foams, and reduced costs are also considerable.With over 45 years of hands-on experience, the author provides in-depth knowledge of water-blown cellular polymers, from their chemistry to formulation and process methodology to produce quality foams. This exciting new phase of the polymer industry is presented in detail with regard to manufacture of standard foams as well as specialty foams. Such descriptions are based on new and emerging technologies, including the challenges and solutions foam producers must face with formulations as well as recommendations for machinery and equipment.This is a comprehensive presentation of all aspects of the technology required to produce water-blown cellular foams with different polymers to meet market demands. This book provides theoretical and practical information as well as guidance, and is an ideal source of information for libraries, students, teachers, foam producers and entrepreneurs.
Download or read book ARBURG Practical Guide to Injection Moulding written by Vannessa Goodship and published by Smithers Rapra. This book was released on 2017-02-27 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book details the factors involved in the injection moulding process, from material properties and selection to troubleshooting faults, and includes the equipment types currently in use and machine settings for different types of plastics. Material flow is a critical parameter in moulding and there are sections covering rheology and viscosity. High temperature is also discussed as it can lead to poor quality mouldings due to material degradation.The text is supported by 74 tables, many of which list key properties and processing parameters, and 233 figures; there are also many photographs of machinery and mouldings to illustrate key points. Troubleshooting flow charts are also included to indicate what should be changed to resolve common problems.Injection moulding in the Western World is becoming increasingly competitive as the manufacturing base for many plastic materials has moved to the East. Thus, Western manufacturers have moved into more technically difficult products and mouldings to provide enhanced added value and maintain market share. Technology is becoming more critical, together with innovation and quality control. There is a chapter on advanced processing in injection moulding covering multimaterial and assisted moulding technologies. This guide will help develop good technical skills and appropriate processing techniques for the range of plastics and products in the marketplace.Every injection moulder will find useful information in this text, in addition, this book will be of use to experts looking to fill gaps in their knowledge base as well as those new to the industry.ARBURG has been manufacturing injection moulding machines since 1954 and is one of the major global players. The company prides itself on the support offered to clients, which is exemplified in its training courses. This book is based on some of the training material and hence is based on years of experience.
Download or read book Plastics in Medical Devices written by Vinny R. Sastri and published by William Andrew. This book was released on 2021-11-24 with total page 525 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plastics in Medical Devices: Properties, Requirements, and Applications, Third Edition provides a comprehensive overview on the main types of plastics used in medical device applications. The book focuses on the applications and properties that are most important in medical device design, such as chemical resistance, sterilization capability and biocompatibility. The roles of additives, stabilizers and fillers as well as the synthesis and production of polymers are covered and backed up with a wealth of data tables. The book also covers other key aspects in detail, including regulations, compliance, purchasing controls and supplier controls, and process validation. This updated edition has been thoroughly revised with regard to new plastic materials, applications and requirements. This is a valuable resource for engineers, scientists and managers involved in the design and manufacture of medical devices. Presents detailed coverage of commercially available plastics used in medical device applications, organized by polymer type and supported by data Includes up-to-date regulatory requirements and practical information on purchasing and supplier controls, process validation and risk management Supports the development, marketing and commercialization of medical devices and materials for use in medical devices
Download or read book Practical Guide to Polypropylene written by Devesh Tripathi and published by iSmithers Rapra Publishing. This book was released on 2002 with total page 112 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polypropylene is now the third largest consumed plastic material after polyethylene and polyvinyl chloride. This book discusses the advantages and disadvantages of working with polypropylene, offering practical comment on the available types of polypropylene, its mechanical properties and in-service performance, and processing. Comparisons with other common plastics are also provided, which highlight the advantages of this polyolefin.
Download or read book Practical Guide to Structures Properties and Applications of Styrenic Polymers written by Norbert Niessner and published by Smithers Rapra. This book was released on 2013-03-18 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: Styrenic polymers are among the economically most important plastics. They combine benign processing with a large variety of product properties - from stiff and transparent to tough and durable. The fact that styrene can be polymerized by different reaction mechanisms (radical, ionic and metal catalyzed) makes this line of products unique in regards to the variety of its properties and applications. The primary objective of this book is to provide a detailed understanding of structure and property relationships of styrenic polymers, and their specific use in various applications. By understanding basic chemistry, supermolecular assembly of block- and graft polymers and microscopic fracture mechanisms, the reader will be able to quickly derive macroscopic behavior and hence select the most suitable polymer for a given application. The second objective of this book is to provide a comprehensive overview about unique value propositions of styrenic polymers in different industries and applications. The reader will get an in-depth understanding of why specific styrenic polymers dominate in market segments like computer and printer housings, exterior automotive parts and the food packaging industry, and what the specific customer benefits of using these polymers are. Finally, the third objective is to provide an outlook for future product and application developments. Hence it serves not only as a quick reference guide for downstream industries, but also as a practical guide for students and researchers in this field of material science.
Download or read book Plastics Engineering written by Russell J. Crawford and published by Butterworth-Heinemann. This book was released on 2020-01-22 with total page 638 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plastics Engineering, Fourth Edition, presents basic essentials on the properties and processing behaviour of plastics and composites. The book gives engineers and technologists a sound understanding of basic principles without the introduction of unduly complex levels of mathematics or chemistry. Early chapters discuss the types of plastics currently available and describe how designers select a plastic for a particular application. Later chapters guide the reader through the mechanical behaviour of materials, along with a detailed analysis of their major processing techniques and principles. All techniques are illustrated with numerous worked examples within each chapter, with further problems provided at the end. This updated edition has been thoroughly revised to reflect major changes in plastic materials and their processing techniques that have occurred since the previous edition. The plastics and processing techniques addressed within the book have been comprehensively updated to reflect current materials and technologies, with new worked examples and problems also included. Gives new engineers and technologists a thorough understanding of the essential properties and processing behavior of plastics and composites Presents a great source of foundational information for students, early-career engineers and researchers Demonstrates how basic engineering principles in design, mechanics of materials, fluid mechanics and thermodynamics may be applied to the properties, processing and performance of modern plastic materials
Download or read book Books in Print written by and published by . This book was released on 1991 with total page 2432 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Engineering Thermoplastics written by Margolis and published by CRC Press. This book was released on 1985-04-18 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: This timely reference fills a large void in the range of information on engineering thermoplastics. It is the only comprehensive data source to examine the benefits and applications of major, high-performance engineering thermoplastics. Organized into separate chapters for each specific type of plastic, Engineering Thermoplastics thoroughly details the properties, advantages, and applications of each thermoplastic, facilitating comparisons between different types ... addresses subjects, such as the selection of the proper thermoplastic for each individual application, which are current and important to both research and commercial development ... provides you with the "inside" information and expertise of contributors who represent the leading plastics manufacturers. This authoritative volume -- edited by an expert with 25 years of industry and consulting experience -- is mandatory reading for plastics, design, materials, chemical, and mechanical engineers and managers in plastics, resins, and metals industries; automotive, appliance, electronics, building products, and related manufacturing industries; and organic and polymer chemists. The book is also ideal reading for advanced undergraduate and graduate plastics engineering, chemical engineering, and mechanical engineering students. Book jacket.
Download or read book Selecting Thermoplastics for Engineering Applications Second Edition written by Macdermott and published by CRC Press. This book was released on 2020-08-26 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Combines fundamental theory, systematic experimentation, disciplined research, and logical procedures to simplify the thermoplastic selection process as well as reduce production cost and time. Second Edition contains new features such as rheology property data, recycling in resin selection, and more and more."
Download or read book Selecting Thermoplastics for Engineering Applications Second Edition written by Macdermott and published by CRC Press. This book was released on 1997-04-22 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Combines fundamental theory, systematic experimentation, disciplined research, and logical procedures to simplify the thermoplastic selection process as well as reduce production cost and time. Second Edition contains new features such as rheology property data, recycling in resin selection, and more and more."