Download or read book ARBURG Practical Guide to Injection Moulding written by Vannessa Goodship and published by Smithers Rapra. This book was released on 2017-02-27 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book details the factors involved in the injection moulding process, from material properties and selection to troubleshooting faults, and includes the equipment types currently in use and machine settings for different types of plastics. Material flow is a critical parameter in moulding and there are sections covering rheology and viscosity. High temperature is also discussed as it can lead to poor quality mouldings due to material degradation.The text is supported by 74 tables, many of which list key properties and processing parameters, and 233 figures; there are also many photographs of machinery and mouldings to illustrate key points. Troubleshooting flow charts are also included to indicate what should be changed to resolve common problems.Injection moulding in the Western World is becoming increasingly competitive as the manufacturing base for many plastic materials has moved to the East. Thus, Western manufacturers have moved into more technically difficult products and mouldings to provide enhanced added value and maintain market share. Technology is becoming more critical, together with innovation and quality control. There is a chapter on advanced processing in injection moulding covering multimaterial and assisted moulding technologies. This guide will help develop good technical skills and appropriate processing techniques for the range of plastics and products in the marketplace.Every injection moulder will find useful information in this text, in addition, this book will be of use to experts looking to fill gaps in their knowledge base as well as those new to the industry.ARBURG has been manufacturing injection moulding machines since 1954 and is one of the major global players. The company prides itself on the support offered to clients, which is exemplified in its training courses. This book is based on some of the training material and hence is based on years of experience.
Download or read book A Practical Guide to Metal and Ceramic Injection Moulding written by R. L. Billiet and published by . This book was released on 2003 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: Beginning with an introduction to injection moulding and an overview of MIM, this practical guide covers all aspects of the technology from selecting raw materials and fillers to tooling up, sintering, feedstock calculations, capital investment and product development.
Download or read book Injection Moulding written by Vannessa Goodship and published by Walter de Gruyter GmbH & Co KG. This book was released on 2020-05-05 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: This revised 3rd edition details the factors involved in the injection moulding process, from material properties and selection to troubleshooting faults, and includes the equipment types currently in use and machine settings for different types of plastics. Since material flow is critical in moulding, the book covers rheology and viscosity. High temperature is also discussed as it can lead to poor quality mouldings due to material degradation.
Download or read book MEMS A Practical Guide of Design Analysis and Applications written by Jan Korvink and published by Springer Science & Business Media. This book was released on 2010-05-28 with total page 981 pages. Available in PDF, EPUB and Kindle. Book excerpt: A new generation of MEMS books has emerged with this cohesive guide on the design and analysis of micro-electro-mechanical systems (MEMS). Leading experts contribute to its eighteen chapters that encompass a wide range of innovative and varied applications. This publication goes beyond fabrication techniques covered by earlier books and fills a void created by a lack of industry standards. Subjects such as transducer operations and free-space microsystems are contained in its chapters. Satisfying a demand for literature on analysis and design of microsystems the book deals with a broad array of industrial applications. This will interest engineering and research scientists in industry and academia.
Download or read book American Book Publishing Record written by and published by . This book was released on 2003 with total page 824 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Subject Guide to Books in Print written by and published by . This book was released on 1997 with total page 3310 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Powder Injection Molding written by Randall M. German and published by . This book was released on 2003 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Practical Guide to Rotational Moulding Second Edition written by Roy J Crawford and published by Smithers Rapra. This book was released on 2012-07-02 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rotational moulding (also called rotomoulding or rotocasting), is a low pressure, high temperature manufacturing process that offers a very competitive alternative to blow moulding, thermoforming and injection moulding for the manufacture of hollow plastic parts. It offers designers the chance to produce relatively stress-free articles, with uniform wall thickness and potentially complex shapes. This second edition of the very popular Practical Guide to Rotational Moulding describes the basic aspects of the process and the latest state-of-the-art developments in the industry. It is completely revised and is extensively illustrated.This guide will be of interest both to students of polymer processing and those who work with rotational moulding equipment.
Download or read book Polymer Enhancement of Technical Textiles written by Roy W. Buckley and published by iSmithers Rapra Publishing. This book was released on 2003 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt: Technical d104iles are high performance speciality materials. Applications are found in inflatable structures, tents, as reinforcement in composites for construction, as body armour and vehicle protection, in filters, as a base for flexible printed circuits, hose, conveyor belts and tyres. Polymer Enhancement of Technical d104iles examines the potential for these materials. The review is accompanied by around 400 abstracts from papers and books in the Rapra Polymer Library database.
Download or read book Developments in Thermoplastic Elastomers written by K. E. Kear and published by iSmithers Rapra Publishing. This book was released on 2003 with total page 158 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermoplastic elastomers (TPEs) have the elastic behaviour of rubber and the processability of thermoplastics. The Freedonia Group has forecast that demand will expand by 6.4% per year to around 2.15 million tons in 2006. There is potential for these new, exciting materials to expand into the much larger thermoset rubber markets. This review includes comparisons between the two material types. There are three major types of TPE: block copolymers, rubber/plastic blends and dynamically vulcanised rubber/plastic alloys known as thermoplastic vulcanisates. The chemistry of these materials and how.
Download or read book Polymer layered Silicate Nanocomposites written by Masami Okamoto and published by iSmithers Rapra Publishing. This book was released on 2003 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: The review sets out to highlight the major developments in this field over the last decade. The different techniques used to prepare PLS nanocomposites are covered. The physicochemical characterisation of PLS nanocomposites and the improved materials properties that those materials can display are discussed. An additional indexed section containing several hundred abstracts from the Rapra Polymer Library database provides useful references for further reading.
Download or read book Polymers in Building and Construction written by Sue Halliwell and published by iSmithers Rapra Publishing. This book was released on 2002 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt: This review outlines the nature, culture and trends in the building and construction industry. It describes the current building and construction market place and the applications and potential for the wide range of polymer materials available today. This review is accompanied by indexed summaries of papers from the Rapra Polymer Library database to allow the reader to search for information on specific topics.
Download or read book Geosynthetics written by David I. Cook and published by iSmithers Rapra Publishing. This book was released on 2003 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geosynthetics often play critical roles in civil engineering and it is important that the materials in use can withstand the physical and chemical pressures of the environment. These range from resistance to leachates from landfill to resistance to root damage in soil liners, as well as standard properties such as resistance to creep, oxidation and UV light, and tensile strength. This Rapra Review Report discusses the polymers used in each category of geosynthetics, production methods, test methods and applications. The review is accompanied by around 400 abstracts from papers and books in the Rapra Polymer Library database, to facilitate further reading on this subject.
Download or read book Practical Guide to High Performance Engineering Plastics written by David J Kemmish and published by Smithers Rapra. This book was released on 2011-07-30 with total page 136 pages. Available in PDF, EPUB and Kindle. Book excerpt: High performance engineering plastics are used in a vast range of applications and environments. They are becoming increasingly important because of trends towards more reliable and higher performance machines and devices. This book gives readers a working knowledge and understanding of high performance engineering plastics. It starts with a simple, practical overview of key properties and principles. In each of the chapters there are sections on production chemistry, product forms, properties, processing and applications. There is a strong bias towards materials and concepts which are used in practice. The materials covered include high performance Polyethersulfones, Polyetherimides, Polyphthalamides, Polyphenylene Sulfide, Polyaryletherketones, Polyamideimides, Polyimides, Polybenzimidazole, Liquid Crystalline Polyesters and Perfluoropolymers. The reader will develop the ability to understand why materials are chosen for certain applications, why those materials have particular properties and how those properties can be modified. This will facilitate conversations with both materials suppliers and end users. It will help to identify the best and most cost effective solutions.
Download or read book A Z of Powder Metallurgy written by Randall German and published by . This book was released on 2005 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: The A-Z of Powder Metallurgy is a comprehensive, easy-to-use desk reference, which can be consulted endlessly for quick and authoritative answers - an essential resource for manufacturers, specifiers, end-users and research workers of powdered metals. Metal Powders are being used with increasing frequency in the manufacture of diverse objects, such as watch-cases and piston connecting-rods. Metal properties, techniques for their use and the quality of the objects made are only part of this complex industry which is growing year-on-year. This volume provides a reference source defining terms, explaining processes and illustrating equipment, giving a thorough overview of the industry as a whole. With this book on your desk, you will. 1. Have instant access to definitions, properties and data on powder metallurgy, ensuring you always have accurate information to hand 2. Be able to write with authority for customers and publications 3. Save time, money and effort by researching metal powders properties, processes and the industry as a whole 1. Written by an internationally respected author with many years experience in the field of metal powders 2. An important, easy-to-use reference tool for manufacturers, specifiers, end-users and research workers of powdered metals. 3. Defines terms, explains processes and illustrates equipment, giving a thorough overview of the industry as a whole
Download or read book Practical Guide to Polyethylene written by Cornelia Vasile and published by iSmithers Rapra Publishing. This book was released on 2005 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical guide begins with general background to the polyethylene family, with price, production and market share information. It describes the basic types of polyethylene including virgin and filled polyethylene, copolymers, block and graft polymers and composites, and reviews the types of additives used in polyethylene. It gives the low down on the properties, including, amongst others, rheological, mechanical, chemical, thermal, and electrical properties. It goes on to describe the processing issues and conditions for the wide range of techniques used for polyethylene, and also considers post-processing and assembly issues. It offers guidance on product design and development issues, including materials selection. It is an indispensable resource for everyone working with this material.
Download or read book Developments in Polyacetylene Nanopolyacetylene written by V.M. Kobryanskii and published by iSmithers Rapra Publishing. This book was released on 2000 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt: This review discusses the preparation of highly ordered polyacetylene blends and compares forms of polyacetylene obtained by different methodsand includes an analysis of the formation of defects in polyacetylene during growth of the polyene chain and cis-trans isomerisation. The mechanism of acetylene polymerisation with rhenium catalysts, and the reactivity of highly ordered polyacetylene blends to oxidation and doping are also discussed. An additional indexed section containing several hundred abstracts from the Rapra Polymer Library database gives useful references for further reading.
