Download or read book A Practical Guide to Disruption and Productivity Loss on Construction and Engineering Projects written by Roger Gibson and published by John Wiley & Sons. This book was released on 2015-05-06 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: Disruption of a construction project is of key concern to the contractor as any delay to the project will involve the contractor in financial loss, unless those losses can be recovered from the employer. It is, however, acknowledged that disruption claims in construction are difficult to prove, usually the result of poor or inaccurate project records, but the cost of lost productivity or reduced efficiency to the contractor under these circumstances is very real. Practical Guide to Disruption and Productivity Loss on Construction & Engineering Projects is clearly written to explain the key causes of disruption and productivity loss. Disruption claims rest on proof of causation, so it discusses the project records that are necessary to demonstrate the causes of disruption, lost productivity and reduced efficiency in detail. Quantification of a disruption claim in terms of delay to activities and the associated costs are also fully discussed. With many worked examples throughout the text, this will be an essential book for anyone either preparing or assessing a disruption and loss of productivity claims, including architects, contract administrators, project managers and quantity surveyors as well as contractors, contracts consultants and construction lawyers.
Download or read book A Practical Guide to Disruption and Productivity Loss on Construction and Engineering Projects written by Roger Gibson and published by John Wiley & Sons. This book was released on 2015-02-25 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: Disruption of a construction project is of key concern to the contractor as any delay to the project will involve the contractor in financial loss, unless those losses can be recovered from the employer. It is, however, acknowledged that disruption claims in construction are difficult to prove, usually the result of poor or inaccurate project records, but the cost of lost productivity or reduced efficiency to the contractor under these circumstances is very real. Practical Guide to Disruption and Productivity Loss on Construction & Engineering Projects is clearly written to explain the key causes of disruption and productivity loss. Disruption claims rest on proof of causation, so it discusses the project records that are necessary to demonstrate the causes of disruption, lost productivity and reduced efficiency in detail. Quantification of a disruption claim in terms of delay to activities and the associated costs are also fully discussed. With many worked examples throughout the text, this will be an essential book for anyone either preparing or assessing a disruption and loss of productivity claims, including architects, contract administrators, project managers and quantity surveyors as well as contractors, contracts consultants and construction lawyers.
Download or read book Quantification of Delay and Disruption in Construction and Engineering Projects written by Robert J. Gemmell and published by . This book was released on 2021 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Practical guide to the quantification of loss caused by delay and disruption in construction and engineering projects.
Download or read book Construction Productivity written by Eddy M. Rojas and published by J. Ross Publishing. This book was released on 2008-11-15 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents construction productivity concepts. This book includes topics such as measuring labor productivity, establishing a field benchmarking program, negotiating loss of labor efficiency, and recommended practices for productivity enhancement. It is suitable for electrical engineers and students.
Download or read book FIDIC Contracts in Asia Pacific written by Donald Charrett and published by Taylor & Francis. This book was released on 2021-11-29 with total page 746 pages. Available in PDF, EPUB and Kindle. Book excerpt: FIDIC contracts are the most widely used contracts for international construction around the world and are used in many different jurisdictions, both common law and civil law. For any construction project, the General Conditions of Contract published by FIDIC need to be supplemented by Particular Conditions that specify the specific requirements of that project subject to the relevant laws. FIDIC Contracts in Asia Pacific provides readers with detailed guidance and resources for the preparation of the Particular Conditions that will comply with the requirements of the applicable laws for a number of the jurisdictions in which FIDIC contracts are used. The laws that apply to the governing law of the contract, construction works and dispute resolution in each jurisdiction are identified. This book offers chapters on the FIDIC Conditions of Contract for Underground Works, and the perspective of a bilateral aid agency on the use of FIDIC contracts. Each jurisdiction features an outline of its construction industry and information on the impact of Covid-19 on both the execution of construction projects and the operation of construction contracts. This book is essential reading for construction professionals, lawyers and students of construction law using FIDIC contracts.
Download or read book FIDIC Contracts in Europe written by Donald Charrett and published by Taylor & Francis. This book was released on 2022-11-29 with total page 705 pages. Available in PDF, EPUB and Kindle. Book excerpt: FIDIC contracts are the most widely used contracts for international construction around the world and are used in many different jurisdictions, both common law and civil law. For any construction project, the General Conditions of Contract published by FIDIC need to be supplemented by Particular Conditions that specify the specific requirements of that project. FIDIC Contracts in Europe: A Practical Guide to Application provides readers with detailed guidance and resources for the preparation of the Particular Conditions that will comply with the requirements of the applicable laws that apply to the site where the work is carried out, and for the governing law of the contract, for a number of the jurisdictions in which FIDIC contracts are used. This book closely follows the format of The International Application of FIDIC Contracts, with the addition of an outline of the construction industry and information on the impact of COVID-19 on both the execution and operation of construction contracts in each jurisdiction. This book is essential reading for construction professionals, lawyers and students of construction law.
Download or read book FIDIC Contracts in the Americas written by Donald Charrett and published by Taylor & Francis. This book was released on 2023-07-18 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: FIDIC contracts are the most widely used contracts for international construction around the world and are used in many different jurisdictions, both common law and civil law. For any construction project, the General Conditions of Contract published by FIDIC may need to be supplemented by Particular Conditions that specify the specific requirements of that project and jurisdiction. FIDIC Contracts in the Americas: A Practical Guide to Application provides readers with an overview of the legal environment, the construction industry and features of contract law applying to construction contracts in a number of jurisdictions in the Americas. It provides detailed guidance for the preparation of the Particular Conditions for FIDIC contracts that will comply with the requirements of the applicable laws that apply to the site where the work is carried out, and for the governing law of the contract. This book also details the impact of COVID-19 on both the execution of construction projects and the operation of construction contracts in each jurisdiction. This book is essential reading for construction professionals, lawyers and students of construction law.
Download or read book FIDIC Contracts in Africa and the Middle East written by Donald Charrett and published by Taylor & Francis. This book was released on 2023-09-20 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: FIDIC contracts are the most widely used contracts for international construction around the world and are used in many different jurisdictions, both common law and civil law. For any construction project, the General Conditions of Contract published by FIDIC need to be supplemented by Particular Conditions that specify the specific requirements of that project. FIDIC Contracts in Africa and the Middle East: A Practical Guide to Application provides readers with detailed guidance and resources for the preparation of the Particular Conditions that will comply with the requirements of the laws that apply to the site where the work is carried out, and for the governing law of the contract, for a number of the jurisdictions in which FIDIC contracts are or can be used. This book closely follows the format of The International Application of FIDIC Contracts. Each jurisdiction features an outline of its construction industry and information on the impact of COVID-19 on both the execution and operation of construction contracts. This book is essential reading for construction professionals, lawyers and students of construction law.
Download or read book The International Application of FIDIC Contracts written by Donald Charrett and published by Taylor & Francis. This book was released on 2019-10-10 with total page 605 pages. Available in PDF, EPUB and Kindle. Book excerpt: FIDIC contracts are the most widely used contracts for international construction around the world and are used in many different jurisdictions, both common law and civil law. For any construction project, the General Conditions of Contract published by FIDIC need to be supplemented by Particular Conditions that specify the specific requirements of that project. The International Application of FIDIC Contracts: A Practical Guide provides readers with detailed guidance and resources for the preparation of the Particular Conditions that will comply with the requirements of the applicable laws that apply to the site where the work is carried out, and for the governing law of the contract, for a number of the jurisdictions in which FIDIC contracts are used. This book is essential reading for construction professionals, lawyers and students of construction law.
Download or read book Productivity in Construction Projects written by Ted Trauner and published by John Wiley & Sons. This book was released on 2022-11-01 with total page 229 pages. Available in PDF, EPUB and Kindle. Book excerpt: PRODUCTIVITY IN CONSTRUCTION PROJECTS From planning/design to post-construction, this valuable guide provides the construction industry the key to understanding the importance of properly tracking and measuring productivity, resulting in increased efficiency and profitability for contractors, subcontractors, owners, civil and construction engineers, and attorneys. Productivity in Construction Projects anticipates and answers the questions of owners, contractors, sub-contractors, and construction professionals to avoid cost overruns in a specific area of work, or when activities are taking more resources to perform than planned. Packed with real-world case studies, Productivity in Construction Projects’ thirteen chapters move beyond the symptoms and provide a remedy. This book provides a comprehensive look at how to: Complete more projects on time and budget, and earn greater profits and future business. Track and analyze productivity on construction projects, and quantify additional costs resulting from productivity losses. Select the right experts and attorneys should litigation or arbitration occur, and employ credible and reliable methods of analysis. Solve problems on the project instead of incurring lengthy and costly litigation or arbitration.
Download or read book Delay Analysis in Construction Contracts written by P. John Keane and published by John Wiley & Sons. This book was released on 2015-06-29 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: The most significant unanticipated costs on many construction projects are the financial impacts associated with delay and disruption to the works. Assessing these, and establishing a causal link from each delay event to its effect, contractual liability and the damages experienced as a direct result of each event, can be difficult and complex. This book is a practical guide to the process of delay analysis and includes an in-depth review of the primary methods of delay analysis, together with the assumptions that underlie the precise calculations required in any quantitative delay analysis. The techniques discussed can be used on projects of any size, under all forms of construction contract, both domestic and international. The authors discuss not only delay analysis techniques, but also their appropriateness under given circumstances, demonstrating how combined approaches may be applied where necessary. They also consider problematic issues including ‘who owns the float’, concurrent delay, early completion programmes, and disruption. The book has been brought fully up to date, including references to the latest publications from the CIOB, AACEI and SCL, as well as current case law. Broad in scope, the book discusses the different delay analysis approaches likely to be encountered on national and international projects, and features practical worked examples and case studies demonstrating the techniques commonly used by experienced practitioners. This is an invaluable resource to programmers and schedulers, delay analysts, contractors, architects, engineers and surveyors. It will also be of interest to clients’ professional advisors managing extension of time or delay claims, as well as construction lawyers who require a better understanding of the underlying assumptions on which many quantitative delay analyses are based. Reviews of First Edition "John Keane and Anthony Caletka are pukka analysts in that tricky area of delays, programming and extension of time. I highly recommend their book Delay Analysis in Construction Contracts. Buy the book." (Building Magazine, February 2009) "The book′s stated purpose is to provide a practical guide for those interested in schedule delay analysis. It provides a good in–depth review of the most common delay analysis techniques.... An excellent book, full of practical tips for the reader and very timely in its publication. It is well worth the cost and a good read for anyone involved in schedule delay analysis." (Cost Engineering, February 2009) It achieves in spades its stated aim of being a practical guide for contractors, contract administrators, programmers and delay analysts, as well as construction lawyers who require a better understanding of the underlying assumptions on which many quantitative delay analyses are based. (Construction Law Journal, 2009)
Download or read book Handbook of Contract Management in Construction written by Ali D. Haidar and published by Springer Nature. This book was released on 2021-06-10 with total page 195 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses the process and principles of contract management in construction from an international perspective. It presents a well-structured, in-depth analysis of construction law doctrines necessary to understand the fundamentals of contract management. The book begins with an introduction to contract management and contract law and formation. It then discusses the various parties to a contract and their relevant obligations, whether they are engineers, contractors or subcontractors. It also addresses standard practices when drafting and revising contracts, as well as what can be expected in standard contracts general clauses. Two chapters are dedicated to contract clauses, with one focused on contract administration such as schedules, payment certificates and defects liability, and the other focused on contract management, such as terminations, dispute resolutions and claims. This book provides a useful reference to engineers, project managers and students within the field of engineering and construction management.
Download or read book Quantification of Delay and Disruption in Construction and Engineering Projects written by Robert Gemmell and published by . This book was released on 2017 with total page 838 pages. Available in PDF, EPUB and Kindle. Book excerpt: Delay and disruption often impacts entire projects and is prevalent throughout the entire construction and engineering industries - no project or construction professional is immune to the effects. This book is aimed at any construction professional anywhere in the world who is involved in preparing, assessing, managing and/or deciding issues concerning the assessment of additional time to complete the work, and also additional payment for delay and/or disruption to the progress of a construction or engineering project. Delay and disruption is endemic in the construction industry and leads to time and cost overruns. It is therefore essential that delays and/or disruptions are identified early so that corrective action can be taken. However, when delay and/or disruption actually occurs, the issue of quantifying the period of any delay, the effects of disruption, and the quantification of the resulting loss during, and especially at the end, of a project is complicated.
Download or read book Quantifying and Managing Disruption Claims written by Hamish Lal and published by Thomas Telford. This book was released on 2002-12-17 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: Claims involving disruption are commonly accepted to be the most difficult to quantify. Disruptions that occur during a working day can lead to productivity loss which, in turn, can lead to time and cost overruns. The solution proposed in this book integrates cost and time in order to develop a site labour productivity measurement system whereby claims involving disruption can be objectively and automatically quantified.
Download or read book Delay and Disruption in Construction Contracts written by Andrew Burr and published by CRC Press. This book was released on 2016-02-05 with total page 1168 pages. Available in PDF, EPUB and Kindle. Book excerpt: Delay and disruption in the course of construction impacts upon building projects of any scale. Now in its 5th edition Delay and Disruption in Construction Contracts continues to be the pre-eminent guide to these often complex and potentially costly issues and has been cited by the judiciary as a leading textbook in court decisions worldwide, see, for example, Mirant v Ove Arup [2007] EWHC 918 (TCC) at [122] to [135] per the late His Honour Judge Toulmin CMG QC. Whilst covering the manner in which delay and disruption should be considered at each stage of a construction project, from inception to completion and beyond, this book includes: An international team of specialist advisory editors, namely Francis Barber (insurance), Steve Briggs (time), Wolfgang Breyer (civil law), Joe Castellano (North America), David-John Gibbs (BIM), Wendy MacLaughlin (Pacific Rim), Chris Miers (dispute boards), Rob Palles-Clark (money), and Keith Pickavance Comparative analysis of the law in this field in Australia, Canada, England and Wales, Hong Kong, Ireland, New Zealand, the United States and in civil law jurisdictions Commentary upon, and comparison of, standard forms from Australia, Ireland, New Zealand, the United Kingdom, USA and elsewhere, including two major new forms New chapters on adjudication, dispute boards and the civil law dynamic Extensive coverage of Building Information Modelling New appendices on the SCL Protocol (Julian Bailey) and the choice of delay analysis methodologies (Nuhu Braimah) Updated case law (to December 2014), linked directly to the principles explained in the text, with over 100 helpful "Illustrations" Bespoke diagrams, which are available for digital download and aid explanation of multi-faceted issues This book addresses delay and disruption in a manner which is practical, useful and academically rigorous. As such, it remains an essential reference for any lawyer, dispute resolver, project manager, architect, engineer, contractor, or academic involved in the construction industry.
Download or read book Construction Project Management written by Eddy M. Rojas and published by J. Ross Publishing. This book was released on 2009-06-15 with total page 433 pages. Available in PDF, EPUB and Kindle. Book excerpt: Construction Project Management offers some of the best project management studies commissioned by ELECTRI International: The Foundation for Electrical Construction that were selected, coordinated, and monitored by some of the most progressive contractors and performed by outstanding scholars from top U.S. universities. Topics include pre-construction planning, early warning signs of project distress, impact of change orders, project sequencing, ideal jobsite inventory levels, tool and material control systems, recommended safety practices, partnering, total quality management, quality assurance, performance evaluations, and contract risk management. All specialty and general contractors will find value in this practical book. The concepts presented will improve your understanding of the main issues affecting construction project management and will provide you with tools and strategies to enhance your company's productivity and profitability.
Download or read book Guide to Good Practice in the Management of Time in Major Projects written by CIOB (The Chartered Institute of Building) and published by John Wiley & Sons. This book was released on 2018-02-13 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: A practical treatise on the processes and standards required for the effective time management of major construction projects This book uses logical step-by-step procedures and examples from inception and risk appraisal—through design and construction to testing and commissioning—to show how an effective and dynamic time model can be used to manage the risk of delay in the completion of construction projects. Integrating with the CIOB major projects contract, the new edition places increased emphasis on the dynamic time model as the way to manage time and cost in major projects, as opposed to the use of a static target baseline program. It includes a new chapter distinguishing the principal features of the dynamic time model and its development throughout the life of a project from inception to completion. Guide to Good Practice in the Management of Time in Major Projects—Dynamic Time Modelling, 2nd Edition features new appendices covering matters such as complexity in construction and engineering projects, productivity guides (including specific references to the UK, Australia, and the USA), and a number of case studies dealing with strategic time management and high-density, resource-based scheduling. Provides guidance for the strategic management of time in construction and civil engineering projects Demonstrates how to use a dynamic time model to manage time pro-actively in building and civil engineering projects Sets out processes and standards to be achieved ensuring systematic documentation and quality control of time management Integrates with the CIOB major projects contract Guide to Good Practice in the Management of Time in Major Projects—Dynamic Time Modelling, 2nd Edition is an ideal handbook for project and program management professionals working on civil engineering and construction projects, including those from contractors, clients, and project management consultants.