Download or read book Automotive Engine Alternatives written by Robert L. Evans and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 269 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the proceedings of the International Symposium on Alternative and Advanced Automotive Engines, held in Vancouver, B.C., on August 11 and 12, 1986. The symposium was sponsored by EXPO 86 and The University of British Columbia, and was part of the specialized periods program of EXPO 86, the 1986 world's fair held in Vancouver. Some 80 attendees were drawn from 11 countries, representing the academic, auto motive and large engine communities. The purpose of the symposium was to provide a critical review of the major alternatives to the internal combustion engine. The scope of the symposium was limited to consideration of combustion engines, so that electric power, for example, was not considered. This was not a reflec tion on the possible contribution which electric propulsion may make in the future, but rather an attempt to focus the proceedings more sharply than if all possible propulsion systems had been considered. In this way all of the contributors were able to participate in the sometimes lively discussion sessions following the presentation of each paper.
Download or read book In cylinder Sampling of Hydrocarbons in the Texaco L 141 TCP Stratified Charge Engine written by Michael Cameron Ingham and published by . This book was released on 1981 with total page 738 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mathematical Modelling in Science and Technology written by Xavier J.R. Avula and published by Elsevier. This book was released on 2014-05-09 with total page 1023 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mathematical Modelling in Science and Technology: The Fourth International Conference covers the proceedings of the Fourth International Conference by the same title, held at the Swiss Federal Institute of Technology, Zurich, Switzerland on August 15-17, 1983. Mathematical modeling is a powerful tool to solve many complex problems presented by scientific and technological developments. This book is organized into 20 parts encompassing 180 chapters. The first parts present the basic principles, methodology, systems theory, parameter estimation, system identification, and optimization of mathematical modeling. The succeeding parts discuss the features of stochastic and numerical modeling and simulation languages. Considerable parts deal with the application areas of mathematical modeling, such as in chemical engineering, solid and fluid mechanics, water resources, medicine, economics, transportation, and industry. The last parts tackle the application of mathematical modeling in student management and other academic cases. This book will prove useful to researchers in various science and technology fields.
Download or read book S A E Transactions written by Society of Automotive Engineers and published by . This book was released on 1982 with total page 1098 pages. Available in PDF, EPUB and Kindle. Book excerpt: Beginning in 1985, one section is devoted to a special topic
Download or read book Inventory of Energy Research and Development 1973 1975 written by Oak Ridge National Laboratory and published by . This book was released on 1976 with total page 948 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of IncoME V CEPE Net 2020 written by Dong Zhen and published by Springer Nature. This book was released on 2021-05-15 with total page 949 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume gathers the latest advances, innovations and applications in the field of condition monitoring, plant maintenance and reliability, as presented by leading international researchers and engineers at the 5th International Conference on Maintenance Engineering and the 2020 Annual Conference of the Centre for Efficiency and Performance Engineering Network (IncoME-V & CEPE Net-2020), held in Zhuhai, China on October 23-25, 2020. Topics include vibro-acoustics monitoring, condition-based maintenance, sensing and instrumentation, machine health monitoring, maintenance auditing and organization, non-destructive testing, reliability, asset management, condition monitoring, life-cycle cost optimisation, prognostics and health management, maintenance performance measurement, manufacturing process monitoring, and robot-based monitoring and diagnostics. The contributions, which were selected through a rigorous international peer-review process, share exciting ideas that will spur novel research directions and foster new multidisciplinary collaborations.
Download or read book Inventory of Energy Research and Development 1973 1975 Introduction Energy research and development projects written by Oak Ridge National Laboratory and published by . This book was released on 1976 with total page 952 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Atomization and Sprays written by Arthur H. Lefebvre and published by CRC Press. This book was released on 2017-03-27 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of this long-time bestseller provides a framework for designing and understanding sprays for a wide array of engineering applications. The text contains correlations and design tools that can be easily understood and used in relating the design of atomizers to the resulting spray behavior. Written to be accessible to readers with a modest technical background, the emphasis is on application rather than in-depth theory. Numerous examples are provided to serve as starting points for using the information in the book. Overall, this is a thoroughly updated edition that still retains the practical focus and readability of the original work by Arthur Lefebvre.
Download or read book Publication written by Massachusetts Institute of Technology. Fluid Mechanics Laboratory and published by . This book was released on 1976 with total page 54 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book SAE Transactions and Literature written by and published by . This book was released on 1979 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Automotive Spark Ignited Direct Injection Gasoline Engines written by F. Zhao and published by Elsevier. This book was released on 2000-02-08 with total page 129 pages. Available in PDF, EPUB and Kindle. Book excerpt: The process of fuel injection, spray atomization and vaporization, charge cooling, mixture preparation and the control of in-cylinder air motion are all being actively researched and this work is reviewed in detail and analyzed. The new technologies such as high-pressure, common-rail, gasoline injection systems and swirl-atomizing gasoline fuel injections are discussed in detail, as these technologies, along with computer control capabilities, have enabled the current new examination of an old objective; the direct-injection, stratified-charge (DISC), gasoline engine. The prior work on DISC engines that is relevant to current GDI engine development is also reviewed and discussed. The fuel economy and emission data for actual engine configurations have been obtained and assembled for all of the available GDI literature, and are reviewed and discussed in detail. The types of GDI engines are arranged in four classifications of decreasing complexity, and the advantages and disadvantages of each class are noted and explained. Emphasis is placed upon consensus trends and conclusions that are evident when taken as a whole; thus the GDI researcher is informed regarding the degree to which engine volumetric efficiency and compression ratio can be increased under optimized conditions, and as to the extent to which unburned hydrocarbon (UBHC), NOx and particulate emissions can be minimized for specific combustion strategies. The critical area of GDI fuel injector deposits and the associated effect on spray geometry and engine performance degradation are reviewed, and important system guidelines for minimizing deposition rates and deposit effects are presented. The capabilities and limitations of emission control techniques and after treatment hardware are reviewed in depth, and a compilation and discussion of areas of consensus on attaining European, Japanese and North American emission standards presented. All known research, prototype and production GDI engines worldwide are reviewed as to performance, emissions and fuel economy advantages, and for areas requiring further development. The engine schematics, control diagrams and specifications are compiled, and the emission control strategies are illustrated and discussed. The influence of lean-NOx catalysts on the development of late-injection, stratified-charge GDI engines is reviewed, and the relative merits of lean-burn, homogeneous, direct-injection engines as an option requiring less control complexity are analyzed.
Download or read book Atomization and Sprays written by Arthur Lefebvre and published by CRC Press. This book was released on 1988-12-01 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: Atomization and Sprays examines the atomization of liquids and characteristics of sprays. It explains the physical processes of atomization as well as guidelines for designing atomizers. In addition, it demonstrates how the importance of the size and velocity of a particle contributes to improved spray characterization. Coverage includes general co
Download or read book Proceedings written by and published by . This book was released on 1979 with total page 546 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Ninth Symposium International on Combustion written by Sam Stuart and published by Elsevier. This book was released on 2013-09-11 with total page 1118 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ninth Symposium (International) on Combustion covers the proceedings of the Ninth Symposium (International) on Combustion, held at Cornell University in Ithaca, New York on August 27 to September 1, 1962, under the auspices of the Combustion Institute. The book focuses on the processes and reactions involved in combustion. The selection first offers information on flame strength of propane-oxygen flames at low pressures in turbulent flow and mixing and flow in ducted turbulent jets. Topics include radial profile of the jetting velocity, radial growth of the jet, and mixing zones of a ducted jet. The text then elaborates on turbulent flame studies in two-dimensional open burners; turbulent mass transfer and rates of combustion in confined turbulent flames; and flame stabilization in a boundary layer. The publication examines the theoretical study of properties of laminar steady state flames as a function of properties of their chemical components and spectra of alkali metal-organic halide flames. The text then takes a look at the thermal radiation theory for plane flame propagation in coal dust clouds; flame characteristics of the diborane-hydrazine system; and studies of the combustion of dimethyl hydrazine and related compounds. The selection is a dependable reference for readers interested in the processes and reactions involved in combustion.
Download or read book Diesel Combustion and Emissions written by Society of Automotive Engineers and published by . This book was released on 1981 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Energy Research Abstracts written by and published by . This book was released on 1978 with total page 986 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Combustion Modeling in Reciprocating Engines written by James N. Mattair and published by Springer. This book was released on 1980 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt:
