Download or read book A Peridynamic Simulation of Repeated Projectile Impacts on a Steel Plate written by Jacob Williams and published by . This book was released on 2021 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Understanding multi-projectile impact events is important for a wide range of military and aerospace applications. However, experimental studies in this field remain technologically challenging. In this thesis, simulations of two 20 mm caliber projectiles impacting a steel target above the ballistic limit were performed. Peridynamics, a non-local, particle-based computational method, was used to simulate the impacts. The spacing between the two impacts on target was varied to study the effects on projectile residual velocity, projectile deformation, and fragmentation. To optimize the Peridynamic parameters, the simulation results from a single impact were compared to experimental data available in the literature. Methods to track and quantify the kinetic energy, direction, mass, and velocity of individual fragments, including the projectile post impact, were developed. The size of the fragmentation field, the variation of individual fragments, and the residual velocity of the projectile post impact were studied. From the double impact study, we find increased projectile residual velocity, reduced projectile deformation, and greater variation in the fragmentation field with impacts from a second projectile compared to a single impact. It is observed that the increases in projectile residual velocity and reduction in projectile deformation diminish to near first impact levels as the projectile spacing is increased. The projectile is also found to ricochet in closer spacings causing large velocity components normal to the projectile's flight path and reduced damage to the plate. The overall size of the fragmentation field of double impact cases is found to be similar in size to single impacts, however, the number of fragments produced from the impacts are different. In cases where the second projectile impacted closer to the initial impact, only one fragment was formed, while cases with spacing 1.25 calibers and greater produced more fragments than the initial impact. This thesis proved to be successful in employing Peridynamic theory to study complex impact and fragmentation related problems.

Download or read book Simulation of Ballistic Impacts in Steel Plates written by Jordi Fernandez Ambrosini and published by . This book was released on 2014 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: In this thesis, a numerical study of normal perforation of 12mm thick steel plates impacted by 20mm diameter conical shaped projectiles is reported. A thorough analysis on specific experimental data results serves as basis for the numerical simulations of the problem, which has been performed using a finite element code, ABAQUS-Explicit with a fixed mesh for the bullet and plate. To define the thermoviscoplastic behaviour of the material constituting the plate, the Johnson–Cook model has been used. This homogeneous behaviour has been coupled with the Johnson–Cook fracture criterion to predict completely the perforation process. The simulations cover a range of impact velocities from 200 to 500m/s. Both qualitative and quantitative predictions of projectile-plate behaviour are compared to the experimental ones from the literature, and good agreement is obtained in general. The analysis considers the influence of adaptive meshing of the plate, interaction and damage of the target plate among others. A specific discussion about damage is reported highlighting its influence on the model. The final results and discussion can be of interest for the design of an optimised version of the model.

Download or read book Peridynamic Theory and Its Applications written by Erdogan Madenci and published by Springer Science & Business Media. This book was released on 2013-10-21 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the peridynamic theory, which provides the capability for improved modeling of progressive failure in materials and structures, and paves the way for addressing multi-physics and multi-scale problems. The book provides students and researchers with a theoretical and practical knowledge of the peridynamic theory and the skills required to analyze engineering problems. The text may be used in courses such as Multi-physics and Multi-scale Analysis, Nonlocal Computational Mechanics, and Computational Damage Prediction. Sample algorithms for the solution of benchmark problems are available so that the reader can modify these algorithms, and develop their own solution algorithms for specific problems. Students and researchers will find this book an essential and invaluable reference on the topic.

Download or read book Dynamic Fracture written by K. Ravi-Chandar and published by Elsevier. This book was released on 2004-10-16 with total page 265 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dynamic fracture in solids has attracted much attention for over a century from engineers as well as physicists due both to its technological interest and to inherent scientific curiosity. Rapidly applied loads are encountered in a number of technical applications. In some cases such loads might be applied deliberately, as for example in problems of blasting, mining, and comminution or fragmentation; in other cases, such dynamic loads might arise from accidental conditions. Regardless of the origin of the rapid loading, it is necessary to understand the mechanisms and mechanics of fracture under dynamic loading conditions in order to design suitable procedures for assessing the susceptibility to fracture. Quite apart from its repercussions in the area of structural integrity, fundamental scientific curiosity has continued to play a large role in engendering interest in dynamic fracture problems In-depth coverage of the mechanics, experimental methods, practical applications Summary of material response of different materials Discussion of unresolved issues in dynamic fracture

Download or read book Opportunities in Protection Materials Science and Technology for Future Army Applications written by National Research Council and published by National Academies Press. This book was released on 2011-08-27 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: Armor plays a significant role in the protection of warriors. During the course of history, the introduction of new materials and improvements in the materials already used to construct armor has led to better protection and a reduction in the weight of the armor. But even with such advances in materials, the weight of the armor required to manage threats of ever-increasing destructive capability presents a huge challenge. Opportunities in Protection Materials Science and Technology for Future Army Applications explores the current theoretical and experimental understanding of the key issues surrounding protection materials, identifies the major challenges and technical gaps for developing the future generation of lightweight protection materials, and recommends a path forward for their development. It examines multiscale shockwave energy transfer mechanisms and experimental approaches for their characterization over short timescales, as well as multiscale modeling techniques to predict mechanisms for dissipating energy. The report also considers exemplary threats and design philosophy for the three key applications of armor systems: (1) personnel protection, including body armor and helmets, (2) vehicle armor, and (3) transparent armor. Opportunities in Protection Materials Science and Technology for Future Army Applications recommends that the Department of Defense (DoD) establish a defense initiative for protection materials by design (PMD), with associated funding lines for basic and applied research. The PMD initiative should include a combination of computational, experimental, and materials testing, characterization, and processing research conducted by government, industry, and academia.

Download or read book Nonlocal Theory of Material Media written by D. Rogula and published by Springer. This book was released on 2014-05-04 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Structural Use of Glass written by Matthias Haldimann and published by IABSE. This book was released on 2008 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book attempts to redress this issue by providing an overview of the recent developments in this field thereby providing a basis for the understanding of the structural performance and design of glass in buildings. Each chapter draws on the latest developments in practice and research and contains contributions from various international glass experts. The mix of general and specialist content ranging from rules of thumb to fracture mechanics and novel applications to post-breakage performance make this book useful to practitioners and researchers. Furthermore, the text is supplemented by tables of the major codes of practice and by an extensive list of references.

Download or read book The Combined Finite Discrete Element Method written by Antonio A. Munjiza and published by John Wiley & Sons. This book was released on 2004-04-21 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: The combined finite discrete element method is a relatively new computational tool aimed at problems involving static and / or dynamic behaviour of systems involving a large number of solid deformable bodies. Such problems include fragmentation using explosives (e.g rock blasting), impacts, demolition (collapsing buildings), blast loads, digging and loading processes, and powder technology. The combined finite-discrete element method - a natural extension of both discrete and finite element methods - allows researchers to model problems involving the deformability of either one solid body, a large number of bodies, or a solid body which fragments (e.g. in rock blasting applications a more or less intact rock mass is transformed into a pile of solid rock fragments of different sizes, which interact with each other). The topic is gaining in importance, and is at the forefront of some of the current efforts in computational modeling of the failure of solids. * Accompanying source codes plus input and output files available on the Internet * Important applications such as mining engineering, rock blasting and petroleum engineering * Includes practical examples of applications areas Essential reading for postgraduates, researchers and software engineers working in mechanical engineering.

Download or read book Computational Fluid and Solid Mechanics 2003 written by K.J Bathe and published by Elsevier. This book was released on 2003-06-02 with total page 2485 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bringing together the world's leading researchers and practitioners of computational mechanics, these new volumes meet and build on the eight key challenges for research and development in computational mechanics.Researchers have recently identified eight critical research tasks facing the field of computational mechanics. These tasks have come about because it appears possible to reach a new level of mathematical modelling and numerical solution that will lead to a much deeper understanding of nature and to great improvements in engineering design.The eight tasks are: - The automatic solution of mathematical models - Effective numerical schemes for fluid flows - The development of an effective mesh-free numerical solution method - The development of numerical procedures for multiphysics problems - The development of numerical procedures for multiscale problems - The modelling of uncertainties - The analysis of complete life cycles of systems - Education - teaching sound engineering and scientific judgement Readers of Computational Fluid and Solid Mechanics 2003 will be able to apply the combined experience of many of the world's leading researchers to their own research needs. Those in academic environments will gain a better insight into the needs and constraints of the industries they are involved with; those in industry will gain a competitive advantage by gaining insight into the cutting edge research being carried out by colleagues in academia. Features - Bridges the gap between academic researchers and practitioners in industry - Outlines the eight main challenges facing Research and Design in Computational mechanics and offers new insights into the shifting the research agenda - Provides a vision of how strong, basic and exciting education at university can be harmonized with life-long learning to obtain maximum value from the new powerful tools of analysis

Download or read book Handbook of Peridynamic Modeling written by Florin Bobaru and published by CRC Press. This book was released on 2016-11-03 with total page 646 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook covers the peridynamic modeling of failure and damage. Peridynamics is a reformulation of continuum mechanics based on integration of interactions rather than spatial differentiation of displacements. The book extends the classical theory of continuum mechanics to allow unguided modeling of crack propagation/fracture in brittle, quasi-brittle, and ductile materials; autonomous transition from continuous damage/fragmentation to fracture; modeling of long-range forces within a continuous body; and multiscale coupling in a consistent mathematical framework.

Download or read book Introduction to the Explicit Finite Element Method for Nonlinear Transient Dynamics written by Shen R. Wu and published by John Wiley & Sons. This book was released on 2012-07-30 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: A systematic introduction to the theories and formulations of the explicit finite element method As numerical technology continues to grow and evolve with industrial applications, understanding the explicit finite element method has become increasingly important, particularly in the areas of crashworthiness, metal forming, and impact engineering. Introduction to the Explicit Finite Element Method for Nonlinear Transient Dynamics is the first book to address specifically what is now accepted as the most successful numerical tool for nonlinear transient dynamics. The book aids readers in mastering the explicit finite element method and programming code without requiring extensive background knowledge of the general finite element. The authors present topics relating to the variational principle, numerical procedure, mechanical formulation, and fundamental achievements of the convergence theory. In addition, key topics and techniques are provided in four clearly organized sections: • Fundamentals explores a framework of the explicit finite element method for nonlinear transient dynamics and highlights achievements related to the convergence theory • Element Technology discusses four-node, three-node, eight-node, and two-node element theories • Material Models outlines models of plasticity and other nonlinear materials as well as the mechanics model of ductile damage • Contact and Constraint Conditions covers subjects related to three-dimensional surface contact, with examples solved analytically, as well as discussions on kinematic constraint conditions Throughout the book, vivid figures illustrate the ideas and key features of the explicit finite element method. Examples clearly present results, featuring both theoretical assessments and industrial applications. Introduction to the Explicit Finite Element Method for Nonlinear Transient Dynamics is an ideal book for both engineers who require more theoretical discussions and for theoreticians searching for interesting and challenging research topics. The book also serves as an excellent resource for courses on applied mathematics, applied mechanics, and numerical methods at the graduate level.

Download or read book Peridynamic Modeling Numerical Techniques and Applications written by Erkan Oterkus and published by Elsevier. This book was released on 2021-04-29 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides readers with an incisive look at cutting-edge peridynamic modeling methods, numerical techniques, their applications, and potential future directions for the field. It starts with an introductory chapter authored by Stewart Silling, who originally developed peridynamics. It then looks at new concepts in the field, with chapters covering dual-horizon peridynamics, peridynamics for axisymmetric analysis, beam and plate models in peridynamics, coupled peridynamics and XFEM, peridynamics for dynamic fracture modeling, and more. From there, it segues into coverage of cutting-edge applications of peridynamics, exploring its biological applications, modeling at the nanoscale, peridynamics for composites delamination and damage in ceramics, and more, concluding with a chapter on the application of artificial intelligence and machine learning in peridynamics. Covers modeling methods, numerical techniques, applications, and future directions for the field Discusses techniques such as dual-horizon peridynamics, damage modeling using the phase-field approach, and contact analysis of rigid and deformable bodies with refined non-ordinary state-based peridynamics Looks at a range of different peridynamic applications such as ice modeling, fiber-reinforced composite modeling, modeling at nanoscale, and more

Download or read book Mechanical Properties of Ceramics written by John B. Wachtman and published by John Wiley & Sons. This book was released on 2009-08-13 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Comprehensive and Self-Contained Treatment of the Theory and Practical Applications of Ceramic Materials When failure occurs in ceramic materials, it is often catastrophic, instantaneous, and total. Now in its Second Edition, this important book arms readers with a thorough and accurate understanding of the causes of these failures and how to design ceramics for failure avoidance. It systematically covers: Stress and strain Types of mechanical behavior Strength of defect-free solids Linear elastic fracture mechanics Measurements of elasticity, strength, and fracture toughness Subcritical crack propagation Toughening mechanisms in ceramics Effects of microstructure on toughness and strength Cyclic fatigue of ceramics Thermal stress and thermal shock in ceramics Fractography Dislocation and plastic deformation in ceramics Creep and superplasticity of ceramics Creep rupture at high temperatures and safe life design Hardness and wear And more While maintaining the first edition's reputation for being an indispensable professional resource, this new edition has been updated with sketches, explanations, figures, tables, summaries, and problem sets to make it more student-friendly as a textbook in undergraduate and graduate courses on the mechanical properties of ceramics.

Download or read book Marine Composites written by Richard Pemberton and published by Woodhead Publishing. This book was released on 2018-08-20 with total page 530 pages. Available in PDF, EPUB and Kindle. Book excerpt: Marine Composites: Design and Performance presents up-to-date information and recent research findings on the application and use of advanced fibre-reinforced composites in the marine environment. Following the success of their previously published title: Marine Applications of Advanced Fibre-reinforced Composites which was published in 2015; this exemplary new book provides comprehensive information on materials selection, characterization, and performance. There are also dedicated sections on sandwich structures, manufacture, advanced concepts, naval architecture and design considerations, and various applications. The book will be an essential reference resource for designers, materials engineers, manufactures, marine scientists, mechanical engineers, civil engineers, coastal engineers, boat manufacturers, offshore platform and marine renewable design engineers. - Presents a unique, high-level reference on composite materials and their application and use in marine structures - Provides comprehensive coverage on all aspects of marine composites, including the latest advances in damage modelling and assessment of performance - Contains contributions from leading experts in the field, from both industry and academia - Covers a broad range of naval, offshore and marine structures

Download or read book Composite Structures written by I.H. Marshall and published by Springer. This book was released on 1991-09-30 with total page 872 pages. Available in PDF, EPUB and Kindle. Book excerpt: The papers contained herein were presented at the Sixth International Conference on Composite Structures (ICCS/6) held at Paisley College, Scotland in September 1991. The Conference was organised and sponsored by Paisley College. It was co-sponsored by Scottish Enterprise, the National Engineering Laboratory, the US Army Research, Development and Standardisation Group-UK, Strathclyde Regional Council and Renfrew District Council. It forms a natural and ongoing progression from the highly successful ICCS/1/2/3/4 and 5 held at Paisley in 1981, 1983, 1985, 1987 and 1989 respectively. As we enter the final decade of this century many organisations throughout the world are adopting a prophetic role by attempting to forecast future scientific advances and their associated impact on mankind. Although some would argue that to do so is folly, without such futuristic visionaries the world would be that much poorer. IntelJigent speculation based on research trends and historical advances, rather than fanciful theories, breathes a healthy air of enthusiasm into the scientific community. Surely this is the very oxygen necessary to ignite the fir~s of innovation and invention amongst pioneers of research.

Download or read book Blast Protection of Civil Infrastructures and Vehicles Using Composites written by Nasim Uddin and published by Elsevier. This book was released on 2010-03-12 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the upsurge in terrorism in recent years and the possibility of accidental blast threats, there is growing interest in manufacturing blast 'hardened' structures and retrofitting blast mitigation materials to existing structures. Composites provide the ideal material for blast protection as they can be engineered to give different levels of protection by varying the reinforcements and matrices.Part one discusses general technical issues with chapters on topics such as blast threats and types of blast damage, processing polymer matrix composites for blast protection, standards and specifications for composite blast protection materials, high energy absorbing composite materials for blast resistant design, modelling the blast response of hybrid laminated composite plates and the response of composite panels to blast wave pressure loadings. Part two reviews applications including ceramic matrix composites for ballistic protection of vehicles and personnel, using composites to protect military vehicles from mine blasts, blast protection of buildings using FRP matrix composites, using composites in blast resistant walls for offshore, naval and defence related structures, using composites to improve the blast resistance of columns in buildings, retrofitting using fibre reinforced polymer composites for blast protection of buildings and retrofitting to improve the blast response of concrete masonry walls.With its distinguished editor and team of expert contributors, Blast protection of civil infrastructures and vehicles using composites is a standard reference for all those concerned with protecting structures from the effects of blasts in both the civil and military sectors. - Reviews the role of composites in blast protection with an examination of technical issues, applications of composites and ceramic matrix composites - Presents numerical examples of simplified blast load computation and an overview of the basics of high explosives includes important properties and physical forms - Varying applications of composites for protection are explored including military and non-military vehicles and increased resistance in building columns and masonry walls

Download or read book Peridynamic Differential Operator for Numerical Analysis written by Erdogan Madenci and published by Springer. This book was released on 2019-01-17 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the peridynamic (PD) differential operator, which enables the nonlocal form of local differentiation. PD is a bridge between differentiation and integration. It provides the computational solution of complex field equations and evaluation of derivatives of smooth or scattered data in the presence of discontinuities. PD also serves as a natural filter to smooth noisy data and to recover missing data. This book starts with an overview of the PD concept, the derivation of the PD differential operator, its numerical implementation for the spatial and temporal derivatives, and the description of sources of error. The applications concern interpolation, regression, and smoothing of data, solutions to nonlinear ordinary differential equations, single- and multi-field partial differential equations and integro-differential equations. It describes the derivation of the weak form of PD Poisson’s and Navier’s equations for direct imposition of essential and natural boundary conditions. It also presents an alternative approach for the PD differential operator based on the least squares minimization. Peridynamic Differential Operator for Numerical Analysis is suitable for both advanced-level student and researchers, demonstrating how to construct solutions to all of the applications. Provided as supplementary material, solution algorithms for a set of selected applications are available for more details in the numerical implementation.