Download or read book Masters Theses in the Pure and Applied Sciences written by Wade H. Shafer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: Masters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS) * at Purdue University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thougtit that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all con cerned if the printing and distribution of the volumes were handled by an interna tional publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Cor poration of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 31 (thesis year 1986) a total of 11 ,480 theses titles trom 24 Canadian and 182 United States universities. We are sure that this broader base tor these titles reported will greatly enhance the value ot this important annual reterence work. While Volume 31 reports theses submitted in 1986, on occasion, certain univer sities do re port theses submitted in previousyears but not reported at the time.
Download or read book An Assessment of Current and Prospective Credit Conditions Affecting Employment and the Prospects for the Current Economic Recovery New Haven Connecticut written by United States. Congress. House. Committee on Banking, Finance, and Urban Affairs. Subcommittee on Domestic Monetary Policy and published by . This book was released on 1984 with total page 896 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book National Institute of Building Sciences NIBS written by United States. Congress. House. Committee on Banking, Finance, and Urban Affairs. Subcommittee on Housing and Community Development and published by . This book was released on 1984 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Refrigeration Systems and Applications written by Ibrahim Din¿er and published by John Wiley & Sons. This book was released on 2017-03-23 with total page 990 pages. Available in PDF, EPUB and Kindle. Book excerpt: The definitive text/reference for students, researchers and practicing engineers This book provides comprehensive coverage on refrigeration systems and applications, ranging from the fundamental principles of thermodynamics to food cooling applications for a wide range of sectoral utilizations. Energy and exergy analyses as well as performance assessments through energy and exergy efficiencies and energetic and exergetic coefficients of performance are explored, and numerous analysis techniques, models, correlations and procedures are introduced with examples and case studies. There are specific sections allocated to environmental impact assessment and sustainable development studies. Also featured are discussions of important recent developments in the field, including those stemming from the author’s pioneering research. Refrigeration is a uniquely positioned multi-disciplinary field encompassing mechanical, chemical, industrial and food engineering, as well as chemistry. Its wide-ranging applications mean that the industry plays a key role in national and international economies. And it continues to be an area of active research, much of it focusing on making the technology as environmentally friendly and sustainable as possible without compromising cost efficiency and effectiveness. This substantially updated and revised edition of the classic text/reference now features two new chapters devoted to renewable-energy-based integrated refrigeration systems and environmental impact/sustainability assessment. All examples and chapter-end problems have been updated as have conversion factors and the thermophysical properties of an array of materials. Provides a solid foundation in the fundamental principles and the practical applications of refrigeration technologies Examines fundamental aspects of thermodynamics, refrigerants, as well as energy and exergy analyses and energy and exergy based performance assessment criteria and approaches Introduces environmental impact assessment methods and sustainability evaluation of refrigeration systems and applications Covers basic and advanced (and hence integrated) refrigeration cycles and systems, as well as a range of novel applications Discusses crucial industrial, technical and operational problems, as well as new performance improvement techniques and tools for better design and analysis Features clear explanations, numerous chapter-end problems and worked-out examples Refrigeration Systems and Applications, Third Edition is an indispensable working resource for researchers and practitioners in the areas of Refrigeration and Air Conditioning. It is also an ideal textbook for graduate and senior undergraduate students in mechanical, chemical, biochemical, industrial and food engineering disciplines.
Download or read book Advances in Heat Pump Assisted Drying Technology written by Vasile Minea and published by . This book was released on 2016 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: 7: Numerical Modeling of Heat Pump-Assisted Contact Drying -- 8: Advances in Dehumidifier Timber Drying in New Zealand -- Back Cover
Download or read book Innovative Design Analysis and Development Practices in Aerospace and Automotive Engineering I DAD 2018 written by U. Chandrasekhar and published by Springer. This book was released on 2018-12-14 with total page 518 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book includes the best articles presented by researchers, academicians and industrial experts at the International Conference on “Innovative Design and Development Practices in Aerospace and Automotive Engineering (I-DAD 2018)”. The book discusses new concept in designs, and analysis and manufacturing technologies for improved performance through specific and/or multi-functional design aspects to optimise the system size, weight-to-strength ratio, fuel efficiency and operational capability. Other aspects of the conference address the ways and means of numerical analysis, simulation and additive manufacturing to accelerate the product development cycles.Describing innovative methods, the book provides valuable reference material for educational and research organizations, as well as industry, wanting to undertake challenging projects of design engineering and product development.
Download or read book Dissertation Abstracts International written by and published by . This book was released on 1994 with total page 700 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Water R718 Turbo Compressor and Ejector Refrigeration Heat Pump Technology written by Milan N. Šarevski and published by Butterworth-Heinemann. This book was released on 2016-02-03 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: Water (R718) Turbo Compressor and Ejector Refrigeration/Heat Pump Technology provides the latest information on efficiency improvements, a main topic in recent investigations of thermal energy machines, plants, and systems that include turbo compressors, ejectors, and refrigeration/heat pump systems. This, when coupled with environmental concerns, has led to the application of eco-friendly refrigerants and to a renewed interest in natural refrigerants. Within this context, readers will find valuable information that explores refrigeration and heat pump systems using natural refrigerants, polygeneration systems, the energy efficiency of thermal systems, the utilization of low temperature waste heat, and cleaner production. The book also examines the technical, economic, and environmental reasons of R718 refrigeration/heat pump systems and how they are competitive with traditional systems, serving as a valuable reference for engineers who work in the design and construction of thermal plants and systems, and those who wish to specialize in the use of R718 as a refrigerant in these systems. - Describes existing novel R718 turbo compressor and ejector refrigeration/heat pump systems and technologies - Provides procedures calculating and optimizing cycles, system components, and system structures - Estimates the performance characteristics of the thermal systems - Exposes the possibilities for wider applications of R718 systems in the field of refrigeration and heat pumps
Download or read book Air Conditioning System Design written by Roger Legg and published by Butterworth-Heinemann. This book was released on 2017-06-15 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: Air Conditioning System Design summarizes essential theory and then explains how the latest air conditioning technology operates. Load calculations, energy efficiency, and selection of technology are all explained in the context of air conditioning as a system, helping the reader fully consider the implications of design decisions. Whether users need to figure out how to apply their mechanical engineering degree to an air conditioning design task or simply want to find out more about air conditioning technology for a research project, this book provides a perfect guide. - Approaches air conditioning as a system, not just a collection of machines - Covers the essential theory on fluid flow and the latest in A/C technology in a very readable and easy-to-use style - Explains the significance of factors, such as climate and thermal comfort as A/C design considerations - Addresses design using a range of air conditioning technologies, such as evaporative cooling, VRF systems, psychromatic software, and dessicant dehumidification
Download or read book Automotive Air Conditioning and Climate Control Systems written by Steven Daly and published by Elsevier. This book was released on 2011-04-18 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: Automotive Air-conditioning and Climate Control Systems is a complete text and reference on the theoretical, practical and legislative aspects of vehicle climate control systems for automotive engineering students and service professionals. It provides the reader with a thorough up-to-date knowledge of current A/C systems, refrigerants and the new possible replacement systems like CO2, and includes unrivalled coverage of electronic and electrical control. Filling the gap in the automotive engineering and servicing market for students and those training on the job, this book will help both newcomers and those with more experience of air-conditioning systems maintenance engineering to keep up with the latest developments and legislation. - Detailed coverage of European and US vehicle HVAC systems - Thorough explanation of current and future systems including CO2 - Meets relevant C&G, IMI, and HND vocational and professional qualifications - IMI recommended reading material - Includes practical cases studies and examples from design and manufacturing companies including Ford, Vauxhall, Toyota, VW, Visteon, Sanden and others, accompanied by over 300 detailed illustrations and photographs
Download or read book Handbook of Air Conditioning and Refrigeration written by Shan K. Wang and published by McGraw Hill Professional. This book was released on 2000-11-07 with total page 1430 pages. Available in PDF, EPUB and Kindle. Book excerpt: * A broad range of disciplines--energy conservation and air quality issues, construction and design, and the manufacture of temperature-sensitive products and materials--is covered in this comprehensive handbook * Provide essential, up-to-date HVAC data, codes, standards, and guidelines, all conveniently located in one volume * A definitive reference source on the design, selection and operation of A/C and refrigeration systems
Download or read book The Exergy Method of Thermal Plant Analysis written by T. J. Kotas and published by Elsevier. This book was released on 2013-10-22 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Exergy Method of Thermal Plant Analysis aims to discuss the history, related concepts, applications, and development of the Exergy Method - analysis technique that uses the Second Law of Thermodynamics as the basis of evaluation of thermodynamic loss. The book, after an introduction to thermodynamics and its related concepts, covers concepts related to exergy, such as physical and chemical exergy, exergy concepts for a control method and a closed-system analysis, the exergy analysis of simple processes, and the thermocentric applications of exergy. A seven-part appendix is also included. Appendices A-D covers miscellaneous information on exergy, and Appendix E features charts of thermodynamic properties. Appendix F is a glossary of terms, and Appendix G contains the list of references. The text is recommended for physicists who would like to know more about the Exergy Method, its underlying principles, and its applications not only in thermal plant analysis but also in certain areas.
Download or read book Chemical Engineering Design written by Gavin Towler and published by Elsevier. This book was released on 2012-01-25 with total page 1321 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical Engineering Design, Second Edition, deals with the application of chemical engineering principles to the design of chemical processes and equipment. Revised throughout, this edition has been specifically developed for the U.S. market. It provides the latest US codes and standards, including API, ASME and ISA design codes and ANSI standards. It contains new discussions of conceptual plant design, flowsheet development, and revamp design; extended coverage of capital cost estimation, process costing, and economics; and new chapters on equipment selection, reactor design, and solids handling processes. A rigorous pedagogy assists learning, with detailed worked examples, end of chapter exercises, plus supporting data, and Excel spreadsheet calculations, plus over 150 Patent References for downloading from the companion website. Extensive instructor resources, including 1170 lecture slides and a fully worked solutions manual are available to adopting instructors. This text is designed for chemical and biochemical engineering students (senior undergraduate year, plus appropriate for capstone design courses where taken, plus graduates) and lecturers/tutors, and professionals in industry (chemical process, biochemical, pharmaceutical, petrochemical sectors). New to this edition: - Revised organization into Part I: Process Design, and Part II: Plant Design. The broad themes of Part I are flowsheet development, economic analysis, safety and environmental impact and optimization. Part II contains chapters on equipment design and selection that can be used as supplements to a lecture course or as essential references for students or practicing engineers working on design projects. - New discussion of conceptual plant design, flowsheet development and revamp design - Significantly increased coverage of capital cost estimation, process costing and economics - New chapters on equipment selection, reactor design and solids handling processes - New sections on fermentation, adsorption, membrane separations, ion exchange and chromatography - Increased coverage of batch processing, food, pharmaceutical and biological processes - All equipment chapters in Part II revised and updated with current information - Updated throughout for latest US codes and standards, including API, ASME and ISA design codes and ANSI standards - Additional worked examples and homework problems - The most complete and up to date coverage of equipment selection - 108 realistic commercial design projects from diverse industries - A rigorous pedagogy assists learning, with detailed worked examples, end of chapter exercises, plus supporting data and Excel spreadsheet calculations plus over 150 Patent References, for downloading from the companion website - Extensive instructor resources: 1170 lecture slides plus fully worked solutions manual available to adopting instructors
Download or read book Heat Pipe Science And Technology written by Amir Faghri and published by Global Digital Press. This book was released on 1995-03 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents basic and advanced techniques in the analytical and numerical modeling of various heat pipe systems under a variety of operating conditions and limitations. It describes the variety of complex and coupled processes of heat and mass transfer in heat pipes. The book consists of fourteen chapters, two appendices, and over 400 illustrations, along with numerous references and a wide variety of technical data on heat pipes.
Download or read book Thermal Systems written by Ivan CK Tam and published by MDPI. This book was released on 2021-04-07 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: We live in interesting times in which life as we know it is being threatened by manmade changes to the atmosphere in which we live. On the global scale, concern is focused on climate change due to greenhouse gas emissions, and on a national scale, atmospheric pollution produced by combustion processes is of concern. A possible approach is through the development of new ideas and innovative processes to the current practices. Among the available options, multi-generation processes such as the trigeneration cycle, battery storage system, solar power plants and heat pumps have been widely studied, as they potentially allow for greater efficiency, lower costs, and reduced emissions. On the other hand, some researchers had been working to increase the potential of energy generation process through heat recovery under the steam generator, organic Rankine cycle, and absorption chillers. In this Special Issue on "Thermal Systems” of fundamental or applied and numerical or experimental investigation, many new concepts in thermal systems and energy utilization were explored and published as original research papers in this “Special Issue”.
Download or read book Heating Ventilating and Air Conditioning written by Faye C. McQuiston and published by John Wiley & Sons. This book was released on 2004-08-06 with total page 648 pages. Available in PDF, EPUB and Kindle. Book excerpt: HEATING, VENTILATING, AND AIR CONDITIONING Completely revised with the latest HVAC design practices! Based on the most recent standards from ASHRAE, this Sixth Edition provides complete and up-to-date coverage of all aspects of heating, ventilation, and air conditioning. You’ll find the latest load calculation procedures, indoor air quality procedures, and issues related to ozone depletion. Throughout the text, numerous worked examples clearly show you how to apply the concepts in realistic scenarios. In addition, several computer programs (several new to this edition) help you understand key concepts and allow you to simulate various scenarios, such as psychometrics and air quality, load calculations, piping system design, duct system design, and cooling coil simulation. Additionally, the load calculation program has been revised and updated. These computer programs are available at the book’s website: www.wiley.com/college/mcquiston Key Features of the Sixth Edition Additional new worked examples in the text and on the accompanying software. Chapters 6-9 have been extensively revised for clarity and ease of use. Chapter 8, The Cooling Load, now includes two approaches: the heat balance method, as recommended by ASHRAE, and the simpler RTS method. Both approaches include computer applications to aid in calculations. Provides complete, authoritative treatment of all aspects of HVAC, based on current ASHRAE standards. Numerous worked examples and homework problems provide realistic scenarios to apply concepts.
Download or read book Introduction to Thermal Systems Engineering written by Michael J. Moran and published by John Wiley & Sons. This book was released on 2002-09-17 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt: This survey of thermal systems engineering combines coverage of thermodynamics, fluid flow, and heat transfer in one volume. Developed by leading educators in the field, this book sets the standard for those interested in the thermal-fluids market. Drawing on the best of what works from market leading texts in thermodynamics (Moran), fluids (Munson) and heat transfer (Incropera), this book introduces thermal engineering using a systems focus, introduces structured problem-solving techniques, and provides applications of interest to all engineers.
