Download or read book A NUMERICAL AND EXPERIMENTAL STUDY ON THE FLOW AND HEAT TRANSFER CHARACTERISTICS IN CO ROTATING DISK SYSTEMS written by Yoon Sub Sim and published by . This book was released on 1983 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt: Average Nusselt numbers were measured experimentally in the Reynolds number range of 500 to 4000 with disk rotation speeds from zero to 3600 RPM.
Download or read book Convective Heat and Mass Transfer in Rotating Disk Systems written by Igor V. Shevchuk and published by Springer Science & Business Media. This book was released on 2009-12-01 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is devoted to investigation of a series of problems of convective heat and mass transfer in rotating-disk systems. Such systems are widespread in scienti?c and engineering applications. As examples from the practical area, one can mention gas turbine and computer engineering, disk brakes of automobiles, rotating-disk air cleaners, systems of microclimate, extractors, dispensers of liquids, evaporators, c- cular saws, medical equipment, food process engineering, etc. Among the scienti?c applications, it is necessary to point out rotating-disk electrodes used for experim- tal determination of the diffusion coef?cient in electrolytes. The system consisting of a ?xed disk and a rotating cone that touches the disk by its vertex is widely used for measurement of the viscosity coef?cient of liquids. For time being, large volume of experimental and computational data on par- eters of ?uid ?ow, heat and mass transfer in different types of rotating-disk systems have been accumulated, and different theoretical approaches to their simulation have been developed. This obviously causes a need of systematization and generalization of these data in a book form.
Download or read book Heat Transfer and Fluid Flow in Rotating Machinery written by Wen-Jei Yang and published by CRC Press. This book was released on 1987 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Flow and Heat Transfer in Rotating disc Systems written by J. M. Owen and published by . This book was released on 1989 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is devoted to the flow and heat transfer between co-rotating discs, and unifies the subject by means of physical insight and mathematical models, validated using experimental data. Many phenomena, unique to rotating flows, are explained, and empirical correlations and theoretical methods, suitable for design purposes, are presented. Data is provided within the book for validating CFD codes which are being increasingly used to compute the flow in rotating-disc systems. Since the publication of Volume 1 in 1989, there has been an increasing interest in rotating disc systems, mainly from research workers and engine designers concerned with understanding and computing the complex flow and heat transfer that occur inside the internal cooling-systems of gas-turbine engines. This book should be of interest to them as it may assist them in making more efficient use of cooling air systems, resulting in both economic and environmental benefits.
Download or read book Computational Mechanics 88 written by S.N. Atluri and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 1775 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this Conference was to become a forum for discussion of both academic and industrial research in those areas of computational engineering science and mechanics which involve and enrich the rational application of computers, numerical methods, and mechanics, in modern technology. The papers presented at this Conference cover the following topics: Solid and Structural Mechanics, Constitutive Modelling, Inelastic and Finite Deformation Response, Transient Analysis, Structural Control and Optimization, Fracture Mechanics and Structural Integrity, Computational Fluid Dynamics, Compressible and Incompressible Flow, Aerodynamics, Transport Phenomena, Heat Transfer and Solidification, Electromagnetic Field, Related Soil Mechanics and MHD, Modern Variational Methods, Biomechanics, and Off-Shore-Structural Mechanics.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1994 with total page 836 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Convective Heat Transfer From Rotating Disks Subjected To Streams Of Air written by Stefan aus der Wiesche and published by Springer. This book was released on 2015-07-15 with total page 119 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Brief describes systematically results of research studies on a series of convective heat transfer phenomena from rotating disks in air crossflow. Phenomena described in this volume were investigated experimentally using an electrically heated disk placed in the test section of a wind tunnel. The authors describe findings in which transitions between different heat transfer regimes can occur in dependency on the involved Reynolds numbers and the angle of incidence, and that these transitions could be related to phenomenological Landau and Landau-de Gennes models. The concise volume closes a substantial gap in the scientific literature with respect to flow and heat transfer in rotating disk systems and provides a comprehensive presentation of new and recent results not previously published in book form.
Download or read book Numerical and Experimental Investigation of Flow Structure and Heat Transfer in a Rotating Cavity with an Axial Throughflow of Cooling Air written by P. G. Tucker and published by . This book was released on 1993 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Previews of Heat and Mass Transfer written by and published by . This book was released on 1990 with total page 622 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Applied mechanics reviews written by and published by . This book was released on 1948 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Dissertation Abstracts International written by and published by . This book was released on 2003 with total page 730 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Modelling of Convective Heat and Mass Transfer in Rotating Flows written by Igor V. Shevchuk and published by Springer. This book was released on 2015-07-24 with total page 253 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph presents results of the analytical and numerical modeling of convective heat and mass transfer in different rotating flows caused by (i) system rotation, (ii) swirl flows due to swirl generators, and (iii) surface curvature in turns and bends. Volume forces (i.e. centrifugal and Coriolis forces), which influence the flow pattern, emerge in all of these rotating flows. The main part of this work deals with rotating flows caused by system rotation, which includes several rotating-disk configurations and straight pipes rotating about a parallel axis. Swirl flows are studied in some of the configurations mentioned above. Curvilinear flows are investigated in different geometries of two-pass ribbed and smooth channels with 180° bends. The author demonstrates that the complex phenomena of fluid flow and convective heat transfer in rotating flows can be successfully simulated using not only the universal CFD methodology, but in certain cases by means of the integral methods, self-similar and analytical solutions. The book will be a valuable read for research experts and practitioners in the field of heat and mass transfer.
Download or read book Computation of Fluid Flow and Heat Transfer in Rotating Disc systems written by C-L. Ong and published by . This book was released on 1988 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Computational and Experimental Simulations in Engineering written by Shaofan Li and published by Springer Nature. This book was released on with total page 1358 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Journal of Thermophysics and Heat Transfer written by and published by . This book was released on 1993 with total page 804 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Flow and Heat Transfer in Rotating disc Systems written by J. M. Owen and published by . This book was released on 1989 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Flow and Heat Transfer in Rotating disc Systems written by John Michael Owen and published by . This book was released on 1989 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discussing fluid mechanics and heat transfer in rotating-disc systems, this text simplifies and extends existing information to provide a basic understanding of the subject. Physical insight, mathematical models and experimental data are used to explain the flow structure and provide theoretical methods and correlations which will be of use to research workers and designers.
