Download or read book The Nonlinear Theory of Elastic Shells written by A. Libai and published by Cambridge University Press. This book was released on 2005-12-15 with total page 564 pages. Available in PDF, EPUB and Kindle. Book excerpt: Elastic shells are pervasive in everyday life. Examples of these thin-walled structures range from automobile hoods to basketballs, veins and arteries, and soft drink cans. This book explains shell theory, with numerous examples and applications. This second edition not only brings all the material of the first edition entirely up to date; it also adds two entirely new chapters on general shell theory and general membrane theory. Aerospace, mechanical, and civil engineers, as well as applied mathematicians, will find this book a clearly written and thorough information source on shell theory.

Download or read book An Introduction to the Mathematical Theory of Vibrations of Elastic Plates written by Raymond David Mindlin and published by World Scientific. This book was released on 2006 with total page 211 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book by the late R D Mindlin is destined to become a classic introduction to the mathematical aspects of two-dimensional theories of elastic plates. It systematically derives the two-dimensional theories of anisotropic elastic plates from the variational formulation of the three-dimensional theory of elasticity by power series expansions. The uniqueness of two-dimensional problems is also examined from the variational viewpoint. The accuracy of the two-dimensional equations is judged by comparing the dispersion relations of the waves that the two-dimensional theories can describe with prediction from the three-dimensional theory. Discussing mainly high-frequency dynamic problems, it is also useful in traditional applications in structural engineering as well as provides the theoretical foundation for acoustic wave devices. Sample Chapter(s). Chapter 1: Elements of the Linear Theory of Elasticity (416 KB). Contents: Elements of the Linear Theory of Elasticity; Solutions of the Three-Dimensional Equations; Infinite Power Series of Two-Dimensional Equations; Zero-Order Approximation; First-Order Approximation; Intermediate Approximations. Readership: Researchers in mechanics, civil and mechanical engineering and applied mathematics.

Download or read book Nonlinear Mechanics of Shells and Plates in Composite Soft and Biological Materials written by Marco Amabili and published by Cambridge University Press. This book was released on 2018-11 with total page 585 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book guides the reader into the modelling of shell structures in applications where advanced composite materials or complex biological materials must be described with great accuracy. A valuable resource for researchers, professionals and graduate students, it presents a variety of practical concepts, diagrams and numerical results.

Download or read book Nonlinear Theory of Shallow Shells written by Iosif I. Vorovich and published by Springer Science & Business Media. This book was released on 2008-01-08 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents rigorous treatment of boundary value problems in nonlinear theory of shallow shells. The consideration of the problems is carried out using methods of nonlinear functional analysis.

Download or read book Thin Plates and Shells written by Eduard Ventsel and published by CRC Press. This book was released on 2001-08-24 with total page 688 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presenting recent principles of thin plate and shell theories, this book emphasizes novel analytical and numerical methods for solving linear and nonlinear plate and shell dilemmas, new theories for the design and analysis of thin plate-shell structures, and real-world numerical solutions, mechanics, and plate and shell models for engineering appli

Download or read book Energy Principles and Variational Methods in Applied Mechanics written by J. N. Reddy and published by John Wiley & Sons. This book was released on 2017-07-21 with total page 1069 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive guide to using energy principles and variational methods for solving problems in solid mechanics This book provides a systematic, highly practical introduction to the use of energy principles, traditional variational methods, and the finite element method for the solution of engineering problems involving bars, beams, torsion, plane elasticity, trusses, and plates. It begins with a review of the basic equations of mechanics, the concepts of work and energy, and key topics from variational calculus. It presents virtual work and energy principles, energy methods of solid and structural mechanics, Hamilton’s principle for dynamical systems, and classical variational methods of approximation. And it takes a more unified approach than that found in most solid mechanics books, to introduce the finite element method. Featuring more than 200 illustrations and tables, this Third Edition has been extensively reorganized and contains much new material, including a new chapter devoted to the latest developments in functionally graded beams and plates. Offers clear and easy-to-follow descriptions of the concepts of work, energy, energy principles and variational methods Covers energy principles of solid and structural mechanics, traditional variational methods, the least-squares variational method, and the finite element, along with applications for each Provides an abundance of examples, in a problem-solving format, with descriptions of applications for equations derived in obtaining solutions to engineering structures Features end-of-the-chapter problems for course assignments, a Companion Website with a Solutions Manual, Instructor's Manual, figures, and more Energy Principles and Variational Methods in Applied Mechanics, Third Edition is both a superb text/reference for engineering students in aerospace, civil, mechanical, and applied mechanics, and a valuable working resource for engineers in design and analysis in the aircraft, automobile, civil engineering, and shipbuilding industries.

Download or read book Generalized Models and Non classical Approaches in Complex Materials 1 written by Holm Altenbach and published by Springer. This book was released on 2018-03-24 with total page 799 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the first of 2 special volumes dedicated to the memory of Gérard Maugin. Including 40 papers that reflect his vast field of scientific activity, the contributions discuss non-standard methods (generalized model) to demonstrate the wide range of subjects that were covered by this exceptional scientific leader. The topics range from micromechanical basics to engineering applications, focusing on new models and applications of well-known models to new problems. They include micro–macro aspects, computational endeavors, options for identifying constitutive equations, and old problems with incorrect or non-satisfying solutions based on the classical continua assumptions.

Download or read book Lecture Notes on the Theory of Plates and Shells written by David J. Steigmann and published by Springer Nature. This book was released on 2023-02-20 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the theory of plates and shells on the basis of the three-dimensional parent theory. The authors explore the thinness of the structure to represent the mechanics of the actual thin three-dimensional body under consideration by a more tractable two-dimensional theory associated with an interior surface. In this way, the relatively complex three-dimensional continuum mechanics of the thin body is replaced by a far more tractable two-dimensional theory. To ensure that the resulting model is predictive, it is necessary to compensate for this ‘dimension reduction’ by assigning additional kinematical and dynamical descriptors to the surface whose deformations are modelled by the simpler two-dimensional theory. The authors avoid the various ad hoc assumptions made in the historical development of the subject, most notably the classical Kirchhoff–Love hypothesis requiring that material lines initially normal to the shell surface remain so after deformation. Instead, such conditions, when appropriate, are here derived rather than postulated.

Download or read book Theory and Analysis of Elastic Plates and Shells written by J. N. Reddy and published by CRC Press. This book was released on 2006-11-20 with total page 561 pages. Available in PDF, EPUB and Kindle. Book excerpt: Because plates and shells are common structural elements in aerospace, automotive, and civil engineering structures, engineers must understand the behavior of such structures through the study of theory and analysis. Compiling this information into a single volume, Theory and Analysis of Elastic Plates and Shells, Second Edition presents a complete

Download or read book Poisson Theory of Elastic Plates written by Kaza Vijayakumar and published by Springer Nature. This book was released on 2021-01-25 with total page 149 pages. Available in PDF, EPUB and Kindle. Book excerpt: This groundbreaking book resolves the main lacuna in Kirchhoff theory of bending of plates in the Poisson-Kirchhoff boundary conditions paradox through the introduction of auxiliary problem governing transverse stresses. The book highlights new primary bending problem which is formulated and analyzed by the application of developed Poisson theory. Analysis with prescribed transverse stresses along faces of the plate, neglected in most reported theories, is presented with an additional term in displacements. The book presents a systematic procedure for the analysis of unsymmetrical laminates. This volume will be a useful reference for students, practicing engineers as well as researchers in applied mechanics.

Download or read book Nonlinear Vibrations and Stability of Shells and Plates written by Marco Amabili and published by Cambridge University Press. This book was released on 2008-01-14 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique book explores both theoretical and experimental aspects of nonlinear vibrations and stability of shells and plates. It is ideal for researchers, professionals, students, and instructors. Expert researchers will find the most recent progresses in nonlinear vibrations and stability of shells and plates, including advanced problems of shells with fluid-structure interaction. Professionals will find many practical concepts, diagrams, and numerical results, useful for the design of shells and plates made of traditional and advanced materials. They will be able to understand complex phenomena such as dynamic instability, bifurcations, and chaos, without needing an extensive mathematical background. Graduate students will find (i) a complete text on nonlinear mechanics of shells and plates, collecting almost all the available theories in a simple form, (ii) an introduction to nonlinear dynamics, and (iii) the state of art on the nonlinear vibrations and stability of shells and plates, including fluid-structure interaction problems.

Download or read book Nonlinear Analysis of Structures 1997 written by Muthukrishnan Sathyamoorthy and published by CRC Press. This book was released on 2017-11-22 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nonlinear Analysis of Structures presents a complete evaluation of the nonlinear static and dynamic behavior of beams, rods, plates, trusses, frames, mechanisms, stiffened structures, sandwich plates, and shells. These elements are important components in a wide variety of structures and vehicles such as spacecraft and missiles, underwater vessels and structures, and modern housing. Today's engineers and designers must understand these elements and their behavior when they are subjected to various types of loads. Coverage includes the various types of nonlinearities, stress-strain relations and the development of nonlinear governing equations derived from nonlinear elastic theory. This complete guide includes both mathematical treatment and real-world applications, with a wealth of problems and examples to support the text. Special topics include a useful and informative chapter on nonlinear analysis of composite structures, and another on recent developments in symbolic computation. Designed for both self-study and classroom instruction, Nonlinear Analysis of Structures is also an authoritative reference for practicing engineers and scientists. One of the world's leaders in the study of nonlinear structural analysis, Professor Sathyamoorthy has made significant research contributions to the field of nonlinear mechanics for twenty-seven years. His foremost contribution to date has been the development of a unique transverse shear deformation theory for plates undergoing large amplitude vibrations and the examination of multiple mode solutions for plates. In addition to his notable research, Professor Sathyamoorthy has also developed and taught courses in the field at universities in India, Canada, and the United States.

Download or read book Linear and Non Linear Deformations of Elastic Solids written by Arabinda Roy and published by CRC Press. This book was released on 2019-12-06 with total page 407 pages. Available in PDF, EPUB and Kindle. Book excerpt: Linear and Non-Linear Deformations of Elastic Solids aims to compile the advances in the field of linear and non-linear elasticity through discussion of advanced topics. Broadly classified into two parts, it includes crack, contact, scattering and wave propagation in linear elastic solids and bending vibration, stability in non-linear elastic solids supported by MATLAB examples. This book is aimed at graduate students and researchers in applied mathematics, solid mechanics, applied mechanics, structural mechanics and includes comprehensive discussion of related analytical/numerical methods.

Download or read book Developments in Theoretical and Applied Mechanics written by W. A. Shaw and published by Elsevier. This book was released on 2013-10-22 with total page 809 pages. Available in PDF, EPUB and Kindle. Book excerpt: Developments in Theoretical and Applied Mechanics, Volume 3 presents papers on the proceedings of the Third Southeastern Conference on Theoretical and Applied Mechanics held in Columbia, S. Carolina on March 31-April 1, 1966. The book covers papers in the areas of continuum mechanics, elasticity, plates and shells, applied mechanics, experimental mechanics, wave propagation, dynamics, vibrations, and fluid mechanics. Physical chemists and mechanical engineers will find the book invaluable.

Download or read book Theory and Analysis of Elastic Plates and Shells Second Edition written by J. N. Reddy and published by CRC Press. This book was released on 1999-02-10 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text presents a complete treatment of the theory and analysis of elastic plates. It provides detailed coverage of classic and shear deformation plate theories and their solutions by analytical as well as numerical methods for bending, buckling and natural vibrations. Analytical solutions are based on the Navier and Levy solution method, and numerical solutions are based on the Rayleigh-Ritz methods and finite element method. The author address a range of topics, including basic equations of elasticity, virtual work and energy principles, cylindrical bending of plates, rectangular plates and an introduction to the finite element method with applications to plates.

Download or read book Localized Dynamics of Thin Walled Shells written by Gennadi I. Mikhasev and published by CRC Press. This book was released on 2020-04-17 with total page 371 pages. Available in PDF, EPUB and Kindle. Book excerpt: Localized Dynamics of Thin-Walled Shells focuses on localized vibrations and waves in thin-walled structures with variable geometrical and physical characteristics. It emphasizes novel asymptotic methods for solving boundary-value problems for dynamic equations in the shell theory, in the form of functions which are highly localized near both fixed and moving lines/points on the shell surface. Features First-of-its-kind work, synthesizing knowledge of the localization of vibrations and waves in thin-walled shells with a mathematical tool to study them Suitable for researchers working on the dynamics of thin shells and also as supplementary reading for undergraduates studying asymptotic methods Offers detailed analysis of wave processes in shells with varying geometric and physical parameters

Download or read book The Shock and Vibration Digest written by and published by . This book was released on 1983 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt: