Download or read book Computational Models for Turbulent Reacting Flows written by Rodney O. Fox and published by Cambridge University Press. This book was released on 2003-10-30 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt: Table of contents
Download or read book Turbulent Combustion Modeling written by Tarek Echekki and published by Springer Science & Business Media. This book was released on 2010-12-25 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: Turbulent combustion sits at the interface of two important nonlinear, multiscale phenomena: chemistry and turbulence. Its study is extremely timely in view of the need to develop new combustion technologies in order to address challenges associated with climate change, energy source uncertainty, and air pollution. Despite the fact that modeling of turbulent combustion is a subject that has been researched for a number of years, its complexity implies that key issues are still eluding, and a theoretical description that is accurate enough to make turbulent combustion models rigorous and quantitative for industrial use is still lacking. In this book, prominent experts review most of the available approaches in modeling turbulent combustion, with particular focus on the exploding increase in computational resources that has allowed the simulation of increasingly detailed phenomena. The relevant algorithms are presented, the theoretical methods are explained, and various application examples are given. The book is intended for a relatively broad audience, including seasoned researchers and graduate students in engineering, applied mathematics and computational science, engine designers and computational fluid dynamics (CFD) practitioners, scientists at funding agencies, and anyone wishing to understand the state-of-the-art and the future directions of this scientifically challenging and practically important field.
Download or read book IUTAM Symposium on Turbulent Mixing and Combustion written by Andrew Pollard and published by Springer Science & Business Media. This book was released on 2013-03-14 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: The goals of the Symposium were to draw together researchers in turbulence and combustion so as to highlight advances and challenge the boundaries to our understanding of turbulent mixing and combus tion from both experimental and simulation perspectives; to facilitate cross-fertilization between leaders in these two fields. These goals were noted to be important given that turbulence itself is viewed as the last great problem in classical physics and the addition of chemical reaction amplifies the difficulties enormously. The papers that have been included here reflect the richness of our subject. Turbulence is rich and complex in its own right. And, its inner structure, hidden in the morass of scales, large and small, can dominate transport. Earlier IUTAM Symposia have considered this field, Eddy Structure Identification in Free Turbulent Flows, Bonnet and Glauser (eds) 1992 and Simulation and Identification of Organized Structures in Flows, Sorensen, Hopfinger and Aubry (eds) 1997. The combustion community is well served by its specialized events, most notable is the bi annual International Combustion Symposium, held under the auspices of the Combustion Institute. Mixing is often considered somewhere in between these two. This broad landscape was addressed in this Sym posium in a somewhat temporal linear fashion of increasing complexity. The lectures considered the many challenges posed by adding one ele ment to the base formed by others: turbulence and turbulent mixing in the absence of combustion through to turbulent mixing dominated by chemistry and combustion.
Download or read book Turbulent Combustion written by Norbert Peters and published by Cambridge University Press. This book was released on 2000-08-15 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: The combustion of fossil fuels remains a key technology for the foreseeable future. It is therefore important that we understand the mechanisms of combustion and, in particular, the role of turbulence within this process. Combustion always takes place within a turbulent flow field for two reasons: turbulence increases the mixing process and enhances combustion, but at the same time combustion releases heat which generates flow instability through buoyancy, thus enhancing the transition to turbulence. The four chapters of this book present a thorough introduction to the field of turbulent combustion. After an overview of modeling approaches, the three remaining chapters consider the three distinct cases of premixed, non-premixed, and partially premixed combustion, respectively. This book will be of value to researchers and students of engineering and applied mathematics by demonstrating the current theories of turbulent combustion within a unified presentation of the field.
Download or read book Bridging Scales in Modelling and Simulation of Non Reacting and Reacting Flows Part I written by and published by Academic Press. This book was released on 2018-03-27 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bridging Scales in Modelling and Simulating Reacting Flows, Part I , Volume 52 presents key methods to bridge scales in the simulation of reacting single phase flows. New sections in the updated release include topics such as quadrature-based moment methods for multiphase chemically reacting flows, the collaboration of experiments and simulations for the development of predictive models, a simulation of turbulent coalescence and breakage of bubbles and droplets in the presence of surfactants, a section on salts and contaminants, and information on the numerical simulation of reactive flows. - Contains reviews by leading authorities in their respective areas - Presents up-to-date reviews of the latest techniques in the modeling of catalytic processes - Includes a broad mix of US and European authors, as well as academic, industrial and research institute perspectives - Provides discussions on the connections between computational and experimental methods
Download or read book Dissertation Abstracts International written by and published by . This book was released on 2008 with total page 994 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Chemical Reactor Modeling written by Hugo A. Jakobsen and published by Springer Science & Business Media. This book was released on 2008-10-15 with total page 1244 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book closes the gap between Chemical Reaction Engineering and Fluid Mechanics. It provides the basic theory for momentum, heat and mass transfer in reactive systems. Numerical methods for solving the resulting equations as well as the interplay between physical and numerical modes are discussed. The book is written using the standard terminology of this community. It is intended for researchers and engineers who want to develop their own codes, or who are interested in a deeper insight into commercial CFD codes in order to derive consistent extensions and to overcome "black box" practice. It can also serve as a textbook and reference book.
Download or read book Transport Phenomena in Fires written by Mohammad Faghri and published by WIT Press. This book was released on 2008 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: Controlled fires are beneficial for the generation of heat and power while uncontrolled fires, like fire incidents and wildfires, are detrimental and can cause enormous material damage and human suffering. This edited book presents the state-of-the-art of modeling and numerical simulation of the important transport phenomena in fires. It describes how computational procedures can be used in analysis and design of fire protection and fire safety. Computational fluid dynamics, turbulence modeling, combustion, soot formation, thermal radiation modeling are demonstrated and applied to pool fires, flame spread, wildfires, fires in buildings and other examples.
Download or read book 2011 2012 Assessment of the Army Research Laboratory written by National Research Council and published by National Academies Press. This book was released on 2013-05-09 with total page 153 pages. Available in PDF, EPUB and Kindle. Book excerpt: The charge of the Army Research Laboratory Technical Assessment Board (ARLTAB) is to provide biennial assessments of the scientific and technical quality of the research, development, and analysis programs at the Army Research Laboratory (ARL). The ARLTAB is assisted by six panels, each of which focuses on the portion of the ARL program conducted by one of ARL's six directorates1. When requested to do so by ARL, the ARLTAB also examines work that cuts across the directorates. For example, during 2011-2012, ARL requested that the ARLTAB examine crosscutting work in the areas of autonomous systems and network science. The overall quality of ARL's technical staff and their work continues to be impressive. Staff continue to demonstrate clear, passionate mindfulness of the importance of transitioning technology to support immediate and longer-term Army needs. Their involvement with the wider scientific and engineering community continues to expand. Such continued involvement and collaboration are fundamentally important for ARL's scientific and technical activities and need to include the essential elements of peer review and interaction through publications and travel to attend professional meetings, including international professional meetings. In general, ARL is working very well within an appropriate research and development niche and has been demonstrating significant accomplishments, as exemplified in the following discussion, which also addresses opportunities and challenges.
Download or read book Recent Advances in DNS and LES written by Doyle Knight and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection of papers presents a broad range of topics in DNS and LES, from new developments in LES modeling to DNS and LES for supersonic and hypersonic boundary layers. The book provides an extensive view of the state of the art in the field.
Download or read book Lattice Boltzmann Modeling for Chemical Engineering written by and published by Academic Press. This book was released on 2020-06-19 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lattice Boltzmann Modeling for Chemical Engineering, Volume 56 in the Advances in Chemical Engineering series, highlights new advances in the field, with this new volume presenting interesting chapters on Simulations of homogeneous and heterogeneous chemical reactions, LBM for 3D Chemical Reactors, LBM Simulations of PEM fuel cells, LBM for separation processes, LBM for two-phase flow (bio)reactors, and more. - Provides the authority and expertise of leading contributors from an international board of authors - Presents the latest release in the Advances in Chemical Engineering series - Includes the latest information on Lattice Boltzmann Modeling for Chemical Engineering
Download or read book Modeling and Simulation of Turbulent Mixing and Reaction written by Daniel Livescu and published by Springer Nature. This book was released on 2020-02-19 with total page 273 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights recent research advances in the area of turbulent flows from both industry and academia for applications in the area of Aerospace and Mechanical engineering. Contributions include modeling, simulations and experiments meant for researchers, professionals and students in the area.
Download or read book Large Eddy Simulation of Turbulent Combustion written by Heinz Pitsch and published by . This book was released on 2006 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the first part of this work, new models for describing sub-grid quantities in reactive LES settings were developed. These models included a new model for the sub-filter variance of a conserved scalar, a new method of filtering the G-equation, a resolution-sensitive description of the turbulent burning velocity, and a flamelet formulation valid near premixed fronts. The models were shown to offer improved predictive capability through application to experimental flames. In the second part, a new method to automatically generate skeletal kinetic mechanisms for surrogate fuels, using the directed relation graph method with error propagation, was developed. These mechanisms are guaranteed to match results obtained using detailed chemistry within a user-defined accuracy for any specified target. They can be combined together to produce adequate chemical models for surrogate fuels. A library containing skeletal mechanisms of various accuracies and domains of applicability was assembled.
Download or read book Turbulent Transport in Magnetized Plasmas written by Wendell Horton and published by World Scientific. This book was released on 2012 with total page 518 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book explains how magnetized plasmas self-organize in states of electromagnetic turbulence that transports particles and energy out of the core plasma faster than anticipated by the fusion scientists designing magnetic confinement systems in the 20th century. It describes theory, experiments and simulations in a unified and up-to-date presentation of the issues of achieving nuclear fusion power.
Download or read book Turbulent Reactive Flows written by R. Borghi and published by Springer Science & Business Media. This book was released on 2013-03-08 with total page 958 pages. Available in PDF, EPUB and Kindle. Book excerpt: Turbulent reactive flows are of common occurrance in combustion engineering, chemical reactor technology and various types of engines producing power and thrust utilizing chemical and nuclear fuels. Pollutant formation and dispersion in the atmospheric environment and in rivers, lakes and ocean also involve interactions between turbulence, chemical reactivity and heat and mass transfer processes. Considerable advances have occurred over the past twenty years in the understanding, analysis, measurement, prediction and control of turbulent reactive flows. Two main contributors to such advances are improvements in instrumentation and spectacular growth in computation: hardware, sciences and skills and data processing software, each leading to developments in others. Turbulence presents several features that are situation-specific. Both for that reason and a number of others, it is yet difficult to visualize a so-called solution of the turbulence problem or even a generalized approach to the problem. It appears that recognition of patterns and structures in turbulent flow and their study based on considerations of stability, interactions, chaos and fractal character may be opening up an avenue of research that may be leading to a generalized approach to classification and analysis and, possibly, prediction of specific processes in the flowfield. Predictions for engineering use, on the other hand, can be foreseen for sometime to come to depend upon modeling of selected features of turbulence at various levels of sophistication dictated by perceived need and available capability.
Download or read book From Multiscale Modeling to Meso Science written by Jinghai Li and published by Springer Science & Business Media. This book was released on 2013-03-22 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: Multiscale modeling is becoming essential for accurate, rapid simulation in science and engineering. This book presents the results of three decades of research on multiscale modeling in process engineering from principles to application, and its generalization for different fields. This book considers the universality of meso-scale phenomena for the first time, and provides insight into the emerging discipline that unifies them, meso-science, as well as new perspectives for virtual process engineering. Multiscale modeling is applied in areas including: multiphase flow and fluid dynamics chemical, biochemical and process engineering mineral processing and metallurgical engineering energy and resources materials science and engineering Jinghai Li is Vice-President of the Chinese Academy of Sciences (CAS), a professor at the Institute of Process Engineering, CAS, and leader of the EMMS (Energy-minimizing multiscale) Group. Wei Ge, Wei Wang, Ning Yang and Junwu Wang are professors at the EMMS Group, part of the Institute of Process Engineering, CAS. Xinhua Liu, Limin Wang, Xianfeng He and Xiaowei Wang are associate professors at the EMMS Group, part of the Institute of Process Engineering, CAS. Mooson Kwauk is an emeritus director of the Institute of Process Engineering, CAS, and is an advisor to the EMMS Group.
