Download or read book A New Actuation Approach for Bio inspired Human friendly Robots written by Dong Jun Shin and published by Stanford University. This book was released on 2011 with total page 171 pages. Available in PDF, EPUB and Kindle. Book excerpt: The increasing demand for physical interaction between humans and robots has led to an interest in robots whose behavior is guaranteed to be safe when they are in close proximity with humans. However, attaining sufficiently high levels of performance while ensuring safety creates formidable challenges in mechanical design, actuation, sensing, and control. To promote safety without compromising performance, a new actuation concept, referred to as hybrid actuation, has been developed. Since low impedance output at high frequencies is essential for robot safety, while optimal passive stiffness is needed for robot performance, the new actuation approach employs a pneumatic artificial muscle as a macro actuator to provide low-frequency torques. Artificial pneumatic muscles provide high force-to-weight ratio and inherent compliance, both of which allow for low impedance actuation. To compensate for the slow and non-linear dynamics of pneumatic actuation, a small electromagnetic actuator collocated at the robot's joint is employed as a mini actuator, which provides high mechanical bandwidth for high performance without increasing the inertia and size of the manipulator. To achieve the appropriate balance between safety and performance, design methodologies were developed that optimally determine key design parameters such as the required mini motor torque capacity, the joint stiffness introduced by an antagonistic pair of muscles, and the pulley radius. Using a testbed, referred to as the Stanford Safety Robot (S2rho), the hybrid actuation was evaluated for position tracking performance, force tracking performance, and impact behavior. The experimental results demonstrate that by significantly improving control performance with the hybrid actuation over performance with pneumatic muscles alone, while reducing the effective inertia significantly, the competing design objectives of safety and performance can be successfully integrated into a single robotic manipulator. As an extension of the hybrid actuation concept, the new design of dual four-degree-of-freedom robotic arms with torso is presented and detailed descriptions of the design are included.
Download or read book A Mathematical Introduction to Robotic Manipulation written by Richard M. Murray and published by CRC Press. This book was released on 2017-12-14 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Mathematical Introduction to Robotic Manipulation presents a mathematical formulation of the kinematics, dynamics, and control of robot manipulators. It uses an elegant set of mathematical tools that emphasizes the geometry of robot motion and allows a large class of robotic manipulation problems to be analyzed within a unified framework. The foundation of the book is a derivation of robot kinematics using the product of the exponentials formula. The authors explore the kinematics of open-chain manipulators and multifingered robot hands, present an analysis of the dynamics and control of robot systems, discuss the specification and control of internal forces and internal motions, and address the implications of the nonholonomic nature of rolling contact are addressed, as well. The wealth of information, numerous examples, and exercises make A Mathematical Introduction to Robotic Manipulation valuable as both a reference for robotics researchers and a text for students in advanced robotics courses.
Download or read book Experimental Robotics VIII written by Bruno Siciliano and published by Springer. This book was released on 2003-09-05 with total page 671 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book collects papers on the state of th eart in experimental robotics. Experimental Robotics is at the core of validating robotics research for both its systems science and theoretical foundations. Because robotics experiments are carried out on physical, complex machines whose controllers are subject to uncertainty, devising meaningful experiments and collecting statistically significant results pose important and unique challenges in robotics. Robotics experiments serve as a unifying theme for robotics system science and algorithmic foundations. These observations have led to the creation of the International Symposia on Experimental Robotics. The papers of the book were presented at the 2002 International Symposium on Experimental Robotics.
Download or read book Robotics Research written by Cédric Pradalier and published by Springer Science & Business Media. This book was released on 2011-05-02 with total page 752 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents a collection of papers presented at the 14th International Symposium of Robotic Research (ISRR). ISRR is the biennial meeting of the International Foundation of Robotic Research (IFRR) and its 14th edition took place in Lucerne, Switzerland, from August 31st to September 3rd, 2009. As for the previous symposia, ISRR 2009 followed up on the successful concept of a mixture of invited contributions and open submissions. Half of the 48 presentations were therefore invited contributions from outstanding researchers selected by the IFRR officers, and half were chosen among the 66 submissions after peer review. This selection process resulted in a truly excellent technical program which, we believe, featured some of the very best of robotic research. Out of the 48 presentations, the 42 papers which were finally submitted for publication are organized in 8 sections that encompass the major research orientations in robotics: Navigation, Control & Planning, Human-Robot Interaction, Manipulation and Humanoids, Learning, Mapping, Multi-Robot Systems, and Micro-Robotics. They represent an excellent snapshot of cutting-edge research in robotics and outline future directions.
Download or read book Cognitive Robotics written by Angelo Cangelosi and published by MIT Press. This book was released on 2022-05-17 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: The current state of the art in cognitive robotics, covering the challenges of building AI-powered intelligent robots inspired by natural cognitive systems. A novel approach to building AI-powered intelligent robots takes inspiration from the way natural cognitive systems—in humans, animals, and biological systems—develop intelligence by exploiting the full power of interactions between body and brain, the physical and social environment in which they live, and phylogenetic, developmental, and learning dynamics. This volume reports on the current state of the art in cognitive robotics, offering the first comprehensive coverage of building robots inspired by natural cognitive systems. Contributors first provide a systematic definition of cognitive robotics and a history of developments in the field. They describe in detail five main approaches: developmental, neuro, evolutionary, swarm, and soft robotics. They go on to consider methodologies and concepts, treating topics that include commonly used cognitive robotics platforms and robot simulators, biomimetic skin as an example of a hardware-based approach, machine-learning methods, and cognitive architecture. Finally, they cover the behavioral and cognitive capabilities of a variety of models, experiments, and applications, looking at issues that range from intrinsic motivation and perception to robot consciousness. Cognitive Robotics is aimed at an interdisciplinary audience, balancing technical details and examples for the computational reader with theoretical and experimental findings for the empirical scientist.
Download or read book Systems Collaboration and Integration written by Chin-Yin Huang and published by Springer Nature. This book was released on 2023-10-17 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a groundbreaking exploration of the historical and contemporary challenges in systems collaboration and integration. This exceptional book delves into engineering design, planning, control, and management, offering invaluable insights into the evolving nature of systems and networks. In an era defined by the ongoing cyber and digital transformation, coupled with artificial intelligence and machine learning, this book offers insights into the future of systems collaboration and integration. Over the past three decades, the PRISM Center and its affiliated PRISM Global Research Network (PGRN) have spearheaded pioneering theories, technologies, and applications in the realm of systems collaboration and integration. Their research, driven by the motto “Knowledge through information; Wisdom through collaboration,” has yielded remarkable advancements. Those achievements and papers presented and updated by the PGRN scholars in the 26th ICPR are included in this book.
Download or read book Journal of Mechanical Design written by and published by . This book was released on 2006 with total page 676 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Robotics Research written by Makoto Kaneko and published by Springer. This book was released on 2010-11-30 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: The International Symposium of Robotics Research (ISRR) continues to be the premiere meeting of the International Foundation of Robotics Research (IFRR). The 13th International Symposium of Robotics Research took place Novemb3r 26-29, 2007, in Hiroshima, Japan, and was organized by the two editors of this book. This volume brings a collection of a broad range of topics in robotics. The content of these contributions provides a wide coverage of the current state of robotics research: the advances and challenges in its theoretical foundation and technology basis, and the developments in its traditional and novel areas of applications. Historically, the proceedings of the ISRR have featured ground-breaking work of the highest caliber, which influenced generations to come. The present volume promises to be no exception. The collection of scientific articles in this volume provides new insights to important problems in robotics, written by some of the leaders in the field.
Download or read book Springer Handbook of Robotics written by Bruno Siciliano and published by Springer. This book was released on 2016-07-27 with total page 2259 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of this handbook provides a state-of-the-art overview on the various aspects in the rapidly developing field of robotics. Reaching for the human frontier, robotics is vigorously engaged in the growing challenges of new emerging domains. Interacting, exploring, and working with humans, the new generation of robots will increasingly touch people and their lives. The credible prospect of practical robots among humans is the result of the scientific endeavour of a half a century of robotic developments that established robotics as a modern scientific discipline. The ongoing vibrant expansion and strong growth of the field during the last decade has fueled this second edition of the Springer Handbook of Robotics. The first edition of the handbook soon became a landmark in robotics publishing and won the American Association of Publishers PROSE Award for Excellence in Physical Sciences & Mathematics as well as the organization’s Award for Engineering & Technology. The second edition of the handbook, edited by two internationally renowned scientists with the support of an outstanding team of seven part editors and more than 200 authors, continues to be an authoritative reference for robotics researchers, newcomers to the field, and scholars from related disciplines. The contents have been restructured to achieve four main objectives: the enlargement of foundational topics for robotics, the enlightenment of design of various types of robotic systems, the extension of the treatment on robots moving in the environment, and the enrichment of advanced robotics applications. Further to an extensive update, fifteen new chapters have been introduced on emerging topics, and a new generation of authors have joined the handbook’s team. A novel addition to the second edition is a comprehensive collection of multimedia references to more than 700 videos, which bring valuable insight into the contents. The videos can be viewed directly augmented into the text with a smartphone or tablet using a unique and specially designed app. Springer Handbook of Robotics Multimedia Extension Portal: http://handbookofrobotics.org/
Download or read book Experimental Robotics written by Jaydev P. Desai and published by Springer. This book was released on 2013-07-09 with total page 966 pages. Available in PDF, EPUB and Kindle. Book excerpt: The International Symposium on Experimental Robotics (ISER) is a series of bi-annual meetings, which are organized, in a rotating fashion around North America, Europe and Asia/Oceania. The goal of ISER is to provide a forum for research in robotics that focuses on novelty of theoretical contributions validated by experimental results. The meetings are conceived to bring together, in a small group setting, researchers from around the world who are in the forefront of experimental robotics research. This unique reference presents the latest advances across the various fields of robotics, with ideas that are not only conceived conceptually but also explored experimentally. It collects robotics contributions on the current developments and new directions in the field of experimental robotics, which are based on the papers presented at the 13the ISER held in Québec City, Canada, at the Fairmont Le Château Frontenac, on June 18-21, 2012. This present thirteenth edition of Experimental Robotics edited by Jaydev P. Desai, Gregory Dudek, Oussama Khatib, and Vijay Kumar offers a collection of a broad range of topics in field and human-centered robotics.
Download or read book Mechanism Design for Robotics written by Marco Ceccarelli and published by MDPI. This book was released on 2019-06-21 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt: MEDER 2018, the IFToMM International Symposium on Mechanism Design for Robotics, was the fourth event in a series that was started in 2010 as a specific conference activity on mechanisms for robots. The aim of the MEDER Symposium is to bring researchers, industry professionals, and students together from a broad range of disciplines dealing with mechanisms for robots, in an intimate, collegial, and stimulating environment. In the 2018 MEDER event, we received significant attention regarding this initiative, as can be seen by the fact that the Proceedings contain contributions by authors from all around the world. The Proceedings of the MEDER 2018 Symposium have been published within the Springer book series on MMS, and the book contains 52 papers that have been selected after review for oral presentation. These papers cover several aspects of the wide field of robotics dealing with mechanism aspects in theory, design, numerical evaluations, and applications. This Special Issue of Robotics (https://www.mdpi.com/journal/robotics/special_issues/MDR) has been obtained as a result of a second review process and selection, but all the papers that have been accepted for MEDER 2018 are of very good quality with interesting contents that are suitable for journal publication, and the selection process has been difficult.
Download or read book Mobile manipulators written by Pedro José Sanz Valero and published by Publicacions de la Universitat Jaume I. This book was released on 2006-06 with total page 30 pages. Available in PDF, EPUB and Kindle. Book excerpt: This DVD contains all the multimedia course material generated from the 4th edition of the International UJI Robotics School on "Mobile Manipulators". The main goal was to clarify central aspects about the latest developments in mobile robotics with special attention to navigation, manipulation, vision and user interaction skills.
Download or read book Control Problems in Robotics written by Antonio Bicchi and published by Springer Science & Business Media. This book was released on 2007-07-12 with total page 283 pages. Available in PDF, EPUB and Kindle. Book excerpt: The ?eld of robotics continues to ?ourish and develop. In common with general scienti?c investigation, new ideas and implementations emerge quite spontaneously and these are discussed, used, discarded or subsumed at c- ferences, in the reference journals, as well as through the Internet. After a little more maturity has been acquired by the new concepts, then archival publication as a scienti?c or engineering monograph may occur. The goal of the Springer Tracts in Advanced Robotics is to publish new developments and advances in the ?elds of robotics research – rapidly and informally but with a high quality. It is hoped that prospective authors will welcome the opportunity to publish a structured presentation of some of the emerging robotics methodologies and technologies. The edited volume by Antonio Bicchi, Henrik Christensen and Domenico Prattichizzo is the outcome of the second edition of a workshop jointly sponsored by the IEEE Control Systems Society and the IEEE Robotics and Automation Society. Noticeably, the previous volume was published in the Springer Lecture Notes on Control and Information Sciences. The authors are recognised as leading scholars internationally. A n- ber of challenging control problems on the forefront of today’s research in robotics and automation are covered, with special emphasis on vision, sensory-feedback control, human-centered robotics, manipulation, planning, ?exible and cooperative robots, assembly systems.
Download or read book Smart Homes and Health Telematics written by Abdelsalam A. Helal and published by Springer Science & Business Media. This book was released on 2008-06-16 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 6th International Conference On Smart Homes and and Health Telematics, ICOST 2008, held in Ames, IA, USA, in June/July 2008. The 24 revised full papers presented were carefully reviewed and selected from 54 submissions. The papers are organized in topical sections on assistive technology to improve quality of life for older adults and their caregivers; context awareness/autonomous computing; devices, systems and algorithms for vision/hearing/cognitive/communication impairments; home health monitoring and intervention; human-machine interface and ambient intelligence; modeling of physical and conceptual information in intelligent environments; real world deployments and experiences in smart homes, hospitals, and living communities; and social/privacy/security issues.
Download or read book Dissertation Abstracts International written by and published by . This book was released on 2006 with total page 780 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Field Robotics Proceedings of the 14th International Conference on Climbing and Walking Robots and the Support Technologies for Mobile Machines written by Philippe Bidaud and published by World Scientific. This book was released on 2012 with total page 1060 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides state of the art scientific and engineering research findings and developments in the area of mobile robotics and associated support technologies. The book contains peer reviewed articles presented at the CLAWAR 2011 conference. A great deal of interest is vested in the use of robots outside the factory environment. The CLAWAR conference series, established as a high profile international event, acts as a platform for dissemination of research and development findings and supports the trend to address current interest in mobile robotics to meet the needs of mankind in various segments of the society. Field robotics aims to bring technologies that allow autonomous systems to assist and/or replace humans performing tasks that are difficult, repetitive, unpleasant, or take place in hazardous environments. These robotic systems will bring sociological and economic benefits through improved human safety, increased equipment utilisation, reduced maintenance costs and increased production.
Download or read book Modern Robotics written by Kevin M. Lynch and published by Cambridge University Press. This book was released on 2017-05-25 with total page 545 pages. Available in PDF, EPUB and Kindle. Book excerpt: A modern and unified treatment of the mechanics, planning, and control of robots, suitable for a first course in robotics.