Download or read book Gas Treating with Chemical Solvents written by Giovanni Astarita and published by John Wiley & Sons. This book was released on 1983 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Proceedings of the 3rd International Gas Processing Symposium written by and published by Elsevier. This book was released on 2012-12-13 with total page 435 pages. Available in PDF, EPUB and Kindle. Book excerpt: Natural gas continues to be the fuel of choice for power generation and feedstock for a range of petrochemical industries. This trend is driven by environmental, economic and supply considerations with a balance clearly tilting in favor of natural gas as both fuel and feedstock. Despite the recent global economic uncertainty, the oil and gas industry is expected to continue its growth globally, especially in emerging economies. The expansion in LNG capacity beyond 2011 and 2012 coupled with recently launched and on-stream GTL plants poses real technological and environmental challenges. These important developments coupled with a global concern on green house gas emissions provide a fresh impetus to engage in new and more focused research activities aimed at mitigating or resolving the challenges facing the industry.Academic researchers and plant engineers in the gas processing industry will benefit from the state of the art papers published in this collection that cover natural gas utilization, sustainability and excellence in gas processing. - Provides state-of-the-art contributions in the area of gas processing - Covers solutions to technical and environmental problems - Input from academia and industry

Download or read book Molecular Thermodynamics of Fluid Phase Equilibria written by John M. Prausnitz and published by Pearson Education. This book was released on 1998-10-22 with total page 1150 pages. Available in PDF, EPUB and Kindle. Book excerpt: The classic guide to mixtures, completely updated with new models, theories, examples, and data. Efficient separation operations and many other chemical processes depend upon a thorough understanding of the properties of gaseous and liquid mixtures. Molecular Thermodynamics of Fluid-Phase Equilibria, Third Edition is a systematic, practical guide to interpreting, correlating, and predicting thermodynamic properties used in mixture-related phase-equilibrium calculations. Completely updated, this edition reflects the growing maturity of techniques grounded in applied statistical thermodynamics and molecular simulation, while relying on classical thermodynamics, molecular physics, and physical chemistry wherever these fields offer superior solutions. Detailed new coverage includes: Techniques for improving separation processes and making them more environmentally friendly. Theoretical concepts enabling the description and interpretation of solution properties. New models, notably the lattice-fluid and statistical associated-fluid theories. Polymer solutions, including gas-polymer equilibria, polymer blends, membranes, and gels. Electrolyte solutions, including semi-empirical models for solutions containing salts or volatile electrolytes. Coverage also includes: fundamentals of classical thermodynamics of phase equilibria; thermodynamic properties from volumetric data; intermolecular forces; fugacities in gas and liquid mixtures; solubilities of gases and solids in liquids; high-pressure phase equilibria; virial coefficients for quantum gases; and much more. Throughout, Molecular Thermodynamics of Fluid-Phase Equilibria strikes a perfect balance between empirical techniques and theory, and is replete with useful examples and experimental data. More than ever, it is the essential resource for engineers, chemists, and other professionals working with mixtures and related processes.

Download or read book Process Systems and Materials for CO2 Capture written by Athanasios I. Papadopoulos and published by John Wiley & Sons. This book was released on 2017-05-01 with total page 686 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive volume brings together an extensive collection of systematic computer-aided tools and methods developed in recent years for CO2 capture applications, and presents a structured and organized account of works from internationally acknowledged scientists and engineers, through: Modeling of materials and processes based on chemical and physical principles Design of materials and processes based on systematic optimization methods Utilization of advanced control and integration methods in process and plant-wide operations The tools and methods described are illustrated through case studies on materials such as solvents, adsorbents, and membranes, and on processes such as absorption / desorption, pressure and vacuum swing adsorption, membranes, oxycombustion, solid looping, etc. Process Systems and Materials for CO2 Capture: Modelling, Design, Control and Integration should become the essential introductory resource for researchers and industrial practitioners in the field of CO2 capture technology who wish to explore developments in computer-aided tools and methods. In addition, it aims to introduce CO2 capture technologies to process systems engineers working in the development of general computational tools and methods by highlighting opportunities for new developments to address the needs and challenges in CO2 capture technologies.

Download or read book CJChE written by and published by . This book was released on 2005-02 with total page 626 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Water Food Energy Nexus written by I. M. Mujtaba and published by CRC Press. This book was released on 2017-09-11 with total page 846 pages. Available in PDF, EPUB and Kindle. Book excerpt: Exponential growth of the worldwide population requires increasing amounts of water, food, and energy. However, as the quantity of available fresh water and energy sources directly affecting cost of food production and transportation diminishes, technological solutions are necessary to secure sustainable supplies. In direct response to this reality, this book focuses on the water-energy-food nexus and describes in depth the challenges and processes involved in efficient water and energy production and management, wastewater treatment, and impact upon food and essential commodities. The book is organized into 4 sections on water, food, energy, and the future of sustainability, highlighting the interplay among these topics. The first section emphasizes water desalination, water management, and wastewater treatment. The second section discusses cereal processing, sustainable food security, bioenergy in food production, water and energy consumption in food processing, and mathematical modeling for food undergoing phase changes. The third section discusses fossil fuels, biofuels, synthetic fuels, renewable energy, and carbon capture. Finally, the book concludes with a discussion of the future of sustainability, including coverage of the role of molecular thermodynamics in developing processes and products, green engineering in process systems, petrochemical water splitting, petrochemical approaches to solar hydrogen generation, design and operation strategy of energy-efficient processes, and the sustainability of process, supply chain, and enterprise.

Download or read book Issues in Mechanical Engineering 2011 Edition written by and published by ScholarlyEditions. This book was released on 2012-01-09 with total page 2526 pages. Available in PDF, EPUB and Kindle. Book excerpt: Issues in Mechanical Engineering / 2011 Edition is a ScholarlyEditions™ eBook that delivers timely, authoritative, and comprehensive information about Mechanical Engineering. The editors have built Issues in Mechanical Engineering: 2011 Edition on the vast information databases of ScholarlyNews.™ You can expect the information about Mechanical Engineering in this eBook to be deeper than what you can access anywhere else, as well as consistently reliable, authoritative, informed, and relevant. The content of Issues in Mechanical Engineering: 2011 Edition has been produced by the world’s leading scientists, engineers, analysts, research institutions, and companies. All of the content is from peer-reviewed sources, and all of it is written, assembled, and edited by the editors at ScholarlyEditions™ and available exclusively from us. You now have a source you can cite with authority, confidence, and credibility. More information is available at http://www.ScholarlyEditions.com/.

Download or read book Dissertation Abstracts International written by and published by . This book was released on 1990 with total page 750 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Modeling in Membranes and Membrane Based Processes written by Anirban Roy and published by John Wiley & Sons. This book was released on 2020-04-07 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book Modeling in Membranes and Membrane-Based Processes is based on the idea of developing a reference which will cover most relevant and “state-of-the-art” approaches in membrane modeling. This book explores almost every major aspect of modeling and the techniques applied in membrane separation studies and applications. This includes first principle-based models, thermodynamics models, computational fluid dynamics simulations, molecular dynamics simulations, and artificial intelligence-based modeling for membrane separation processes. These models have been discussed in light of various applications ranging from desalination to gas separation. In addition, this breakthrough new volume covers the fundamentals of polymer membrane pore formation mechanisms, covering not only a wide range of modeling techniques, but also has various facets of membrane-based applications. Thus, this book can be an excellent source for a holistic perspective on membranes in general, as well as a comprehensive and valuable reference work. Whether a veteran engineer in the field or lab or a student in chemical or process engineering, this latest volume in the “Advances in Membrane Processes” is a must-have, along with the first book in the series, Membrane Processes, also available from Wiley-Scrivener.

Download or read book Environmental Impact II written by G. Passerini and published by WIT Press. This book was released on 2014-05-14 with total page 769 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains papers presented at the 2nd International Conference on Environmental and Economic Impacts on Sustainable Development incorporating Environmental Economics, Toxicology and Brownfields. Following the success of the first meeting held in the New Forest, home of the Wessex Institute of Technology, in 2012, it considers the pressing issues related to environmental impacts in order to provide complete solutions. The included papers discuss how to assess the impact of economic constraints on the environment, considering the social aspects as well as any resulting environmental damage. The overuse of natural resources and the resulting pollution of the environment need to be better understood in financial terms. Uncontrolled development can result in damage to the environment in terms of the release of toxic substances and hazardous waste. The increasing number of new chemical compounds poses a major challenge to the environment as it is difficult in many cases to predict their effects and take appropriate decisions. Their economic impact can be particularly challenging. The book examines issues related to whether some forms of development are compatible with environmental protection, particularly in cases of possible serious contamination and toxicity. The demand for development land has led to the reuse of properties that have been abandoned for a variety of reasons. Many of them are brownfields, sites which have deteriorated in different ways, including by contamination. These sites are usually a burden in terms of economic losses and contribute to the detriment of the quality of life of entire neighbourhoods. Rehabilitation of local fields, particularly those that are contaminated can be an expensive undertaking and require not only technical solutions but the involvement of financial, regulatory and community stakeholders. Fundamental to this premise is the analysis of the risks involved and the development of appropriate strategies. The papers address problems of great importance discussing more constructive and progressive approaches to ensure sustainability. A major motivation for the meeting is to learn from past failures, to avoid repeating similar mistakes, while attempting to prevent emerging threats to the environmental and ecological systems. Topics covered include: Environmental policies and planning; Environmental assessments; Development issues; Sustainable cities; Economic analysis; Natural resources management; Energy and the environment; Food and the environment; Ecosystems health; Soil contamination; Brownfields rehabilitation; Water resources management; Air and water pollution; Toxicity studies; Environmental health risk; Risk analysis; Community participation; Legislation and regulations.

Download or read book Foundations of Molecular Modeling and Simulation written by Edward J. Maginn and published by Springer Nature. This book was released on 2021-03-25 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: This highly informative and carefully presented book comprises select proceedings of Foundation for Molecular Modelling and Simulation (FOMMS 2018). The contents are written by invited speakers centered on the theme Innovation for Complex Systems. It showcases new developments and applications of computational quantum chemistry, statistical mechanics, molecular simulation and theory, and continuum and engineering process simulation. This volume will serve as a useful reference to researchers, academicians and practitioners alike.

Download or read book Chemical Engineering in the Pharmaceutical Industry written by David J. am Ende and published by John Wiley & Sons. This book was released on 2019-03-28 with total page 1166 pages. Available in PDF, EPUB and Kindle. Book excerpt: A guide to the development and manufacturing of pharmaceutical products written for professionals in the industry, revised second edition The revised and updated second edition of Chemical Engineering in the Pharmaceutical Industry is a practical book that highlights chemistry and chemical engineering. The book’s regulatory quality strategies target the development and manufacturing of pharmaceutically active ingredients of pharmaceutical products. The expanded second edition contains revised content with many new case studies and additional example calculations that are of interest to chemical engineers. The 2nd Edition is divided into two separate books: 1) Active Pharmaceutical Ingredients (API’s) and 2) Drug Product Design, Development and Modeling. The active pharmaceutical ingredients book puts the focus on the chemistry, chemical engineering, and unit operations specific to development and manufacturing of the active ingredients of the pharmaceutical product. The drug substance operations section includes information on chemical reactions, mixing, distillations, extractions, crystallizations, filtration, drying, and wet and dry milling. In addition, the book includes many applications of process modeling and modern software tools that are geared toward batch-scale and continuous drug substance pharmaceutical operations. This updated second edition: Contains 30new chapters or revised chapters specific to API, covering topics including: manufacturing quality by design, computational approaches, continuous manufacturing, crystallization and final form, process safety Expanded topics of scale-up, continuous processing, applications of thermodynamics and thermodynamic modeling, filtration and drying Presents updated and expanded example calculations Includes contributions from noted experts in the field Written for pharmaceutical engineers, chemical engineers, undergraduate and graduate students, and professionals in the field of pharmaceutical sciences and manufacturing, the second edition of Chemical Engineering in the Pharmaceutical Industryf ocuses on the development and chemical engineering as well as operations specific to the design, formulation, and manufacture of drug substance and products.

Download or read book Petroleum Abstracts written by and published by . This book was released on 1996 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Calorimetry and Thermal Methods in Catalysis written by Aline Auroux and published by Springer Science & Business Media. This book was released on 2013-09-18 with total page 569 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is about calorimetry and thermal analysis methods, alone or linked to other techniques, as applied to the characterization of catalysts, supports and adsorbents, and to the study of catalytic reactions in various domains: air and wastewater treatment, clean and renewable energies, refining of hydrocarbons, green chemistry, hydrogen production and storage. The book is intended to fill the gap between the basic thermodynamic and kinetics concepts acquired by students during their academic formation, and the use of experimental techniques such as thermal analysis and calorimetry to answer practical questions. Moreover, it supplies insights into the various thermal and calorimetric methods which can be employed in studies aimed at characterizing the physico-chemical properties of solid adsorbents, supports and catalysts, and the processes related to the adsorption desorption phenomena of the reactants and/or products of catalytic reactions. The book also covers the basic concepts for physico-chemical comprehension of the relevant phenomena. Thermodynamic and kinetic aspects of the catalytic reactions can be fruitfully investigated by means of thermal analysis and calorimetric methods, in order to better understand the sequence of the elemental steps in the catalysed reaction. So the fundamental theory behind the various thermal analysis and calorimetric techniques and methods also are illustrated.

Download or read book Multiphase Production written by Jean Falcimaigne and published by Editions OPHRYS. This book was released on 2008 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation This book presents the fundamentals of multiphase production with regard to flow simulations in multiphase pipelines, multiphase pumping and multiphase metering. It gives a large range of information on approaches and technologies which can be used today. It is designed for engineers involved in field development, but also for petroleum engineering students.

Download or read book Distillation and Absorption 2006 written by Eva Sørensen and published by IChemE. This book was released on 2006 with total page 1066 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work contains the proceedings of the Distillation and Absorption conference, which happens every 5 years. This collection of 100 contributions spanning 23 countries showcase the newest and best distillation and absorption technologies which cover a broad range of fundamental and applied aspects of the technology. To address these aspects, the contributions have been put into seven themes: modelling and simulation (steady-state, dynamic and CFD); energy efficiency and sustainability; equipment design and operation; integrated, hybrid and novel processes; process troubleshooting and handling operational problems; control and operation; and basic data.

Download or read book 12th International Symposium on Process Systems Engineering and 25th European Symposium on Computer Aided Process Engineering written by and published by Elsevier. This book was released on 2015-07-14 with total page 2667 pages. Available in PDF, EPUB and Kindle. Book excerpt: 25th European Symposium on Computer-Aided Process Engineering contains the papers presented at the 12th Process Systems Engineering (PSE) and 25th European Society of Computer Aided Process Engineering (ESCAPE) Joint Event held in Copenhagen, Denmark, 31 May - 4 June 2015. The purpose of these series is to bring together the international community of researchers and engineers who are interested in computing-based methods in process engineering. This conference highlights the contributions of the PSE/CAPE community towards the sustainability of modern society. Contributors from academia and industry establish the core products of PSE/CAPE, define the new and changing scope of our results, and future challenges. Plenary and keynote lectures discuss real-world challenges (globalization, energy, environment, and health) and contribute to discussions on the widening scope of PSE/CAPE versus the consolidation of the core topics of PSE/CAPE. - Highlights how the Process Systems Engineering/Computer-Aided Process Engineering community contributes to the sustainability of modern society - Presents findings and discussions from both the 12th Process Systems Engineering (PSE) and 25th European Society of Computer-Aided Process Engineering (ESCAPE) Events - Establishes the core products of Process Systems Engineering/Computer Aided Process Engineering - Defines the future challenges of the Process Systems Engineering/Computer Aided Process Engineering community