Download or read book A Model for Multicomponent Droplet Vaporization at High Ambient Pressures written by J. D. Jin and published by . This book was released on 1985 with total page 11 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Numerical Study of Spherical Droplet Vaporization in a High Pressure Environment written by Eric Warren Curtis and published by . This book was released on 1991 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Transport Phenomena with Drops and Bubbles written by Satwindar S. Sadhal and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fluid flows that transfer heat and mass often involve drops and bubbles, particularly if there are changes of phase in the fluid in the formation or condensation of steam, for example. Such flows pose problems for the chemical and mechanical engineer significantly different from those posed by single-phase flows. This book reviews the current state of the field and will serve as a reference for researchers, engineers, teachers, and students concerned with transport phenomena. It begins with a review of the basics of fluid flow and a discussion of the shapes and sizes of fluid particles and the factors that determine these. The discussion then turns to flows at low Reynolds numbers, including effects due to phase changes or to large radial inertia. Flows at intermediate and high Reynolds numbers are treated from a numerical perspective, with reference to experimental results. The next chapter considers the effects of solid walls on fluid particles, treating both the statics and dynamics of the particle-wall interaction and the effects of phase changes at a solid wall. This is followed by a discussion of the formation and breakup of drops and bubbles, both with and without phase changes. The last two chapters discuss compound drops and bubbles, primarily in three-phase systems, and special topics, such as transport in an electric field.
Download or read book Advances in Heat Transfer written by and published by Academic Press. This book was released on 1995-05-25 with total page 347 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Heat Transfer is designed to fill the information gap between regularly scheduled journals and university level textbooks by providing in-depth review articles over a broader scope than is allowablein either journals or texts.
Download or read book Recent Advances In Spray Combustion written by Kenneth K. Kuo and published by AIAA. This book was released on 1996 with total page 542 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book ASME Technical Papers written by and published by . This book was released on 1999 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Droplet Vaporization in a High Pressure Gas written by Jon Phillip Hartfield and published by . This book was released on 1991 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Joint Meeting of the U S Sections of the Combustion Institute Western States Central States Eastern States written by and published by . This book was released on 1999 with total page 954 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Experimental Investigation of Droplet Vaporization Under Conditions of High Temperatures and Pressures written by G. B. Petrazhitskiĭ and published by . This book was released on 1964 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Modeling Engine Spray and Combustion Processes written by Gunnar Stiesch and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: The utilization of mathematical models to numerically describe the performance of internal combustion engines is of great significance in the development of new and improved engines. Today, such simulation models can already be viewed as standard tools, and their importance is likely to increase further as available com puter power is expected to increase and the predictive quality of the models is constantly enhanced. This book describes and discusses the most widely used mathematical models for in-cylinder spray and combustion processes, which are the most important subprocesses affecting engine fuel consumption and pollutant emissions. The relevant thermodynamic, fluid dynamic and chemical principles are summarized, and then the application of these principles to the in-cylinder processes is ex plained. Different modeling approaches for the each subprocesses are compared and discussed with respect to the governing model assumptions and simplifica tions. Conclusions are drawn as to which model approach is appropriate for a specific type of problem in the development process of an engine. Hence, this book may serve both as a graduate level textbook for combustion engineering stu dents and as a reference for professionals employed in the field of combustion en gine modeling. The research necessary for this book was carried out during my employment as a postdoctoral scientist at the Institute of Technical Combustion (ITV) at the Uni versity of Hannover, Germany and at the Engine Research Center (ERC) at the University of Wisconsin-Madison, USA.
Download or read book Paper written by and published by . This book was released on 2000 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Multicomponent Droplet Vaporization in a High Temperature Gas written by A. Y. Tong and published by . This book was released on 1984 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Attempts have been made to compare the results of various models with the existing experimental data - no final conclusion can be drawn based on the experimental data.
Download or read book Mixture Formation in Internal Combustion Engines written by Carsten Baumgarten and published by Springer Science & Business Media. This book was released on 2006-09-28 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: A systematic control of mixture formation with modern high-pressure injection systems enables us to achieve considerable improvements of the combustion pr- ess in terms of reduced fuel consumption and engine-out raw emissions. However, because of the growing number of free parameters due to more flexible injection systems, variable valve trains, the application of different combustion concepts within different regions of the engine map, etc., the prediction of spray and m- ture formation becomes increasingly complex. For this reason, the optimization of the in-cylinder processes using 3D computational fluid dynamics (CFD) becomes increasingly important. In these CFD codes, the detailed modeling of spray and mixture formation is a prerequisite for the correct calculation of the subsequent processes like ignition, combustion and formation of emissions. Although such simulation tools can be viewed as standard tools today, the predictive quality of the sub-models is c- stantly enhanced by a more accurate and detailed modeling of the relevant pr- esses, and by the inclusion of new important mechanisms and effects that come along with the development of new injection systems and have not been cons- ered so far. In this book the most widely used mathematical models for the simulation of spray and mixture formation in 3D CFD calculations are described and discussed. In order to give the reader an introduction into the complex processes, the book starts with a description of the fundamental mechanisms and categories of fuel - jection, spray break-up, and mixture formation in internal combustion engines.
Download or read book Proceedings of the 1999 Fall Technical Conference of the ASME Internal Combustion Engine Division New developments in engine design controls and DI sprays written by American Society of Mechanical Engineers. Internal Combustion Engine Division. Technical Conference and published by . This book was released on 1999 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Chemical Kinetics in Combustion and Reactive Flows Modeling Tools and Applications written by V. I. Naoumov and published by Cambridge University Press. This book was released on 2019-08-22 with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduces advanced mathematical tools for the modeling, simulation, and analysis of chemical non-equilibrium phenomena in combustion and flows, following a detailed explanation of the basics of thermodynamics and chemical kinetics of reactive mixtures. Researchers, practitioners, lecturers, and graduate students will find this work valuable.
Download or read book Advanced Earth to orbit Propulsion Technology 1994 written by Robert J. Richmond and published by . This book was released on 1994 with total page 690 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Experimental Studies of the Vaporization of Droplets in Heated Air at High Pressures written by and published by . This book was released on 1969 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt:
