Download or read book Modeling Simulation and Control of Flexible Manufacturing Systems written by MengChu Zhou and published by World Scientific. This book was released on 1999 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: One critical barrier leading to successful implementation of flexible manufacturing and related automated systems is the ever-increasing complexity of their modeling, analysis, simulation, and control. Research and development over the last three decades has provided new theory and graphical tools based on Petri nets and related concepts for the design of such systems. The purpose of this book is to introduce a set of Petri-net-based tools and methods to address a variety of problems associated with the design and implementation of flexible manufacturing systems (FMSs), with several implementation examples.There are three ways this book will directly benefit readers. First, the book will allow engineers and managers who are responsible for the design and implementation of modern manufacturing systems to evaluate Petri nets for applications in their work. Second, it will provide sufficient breadth and depth to allow development of Petri-net-based industrial applications. Third, it will allow the basic Petri net material to be taught to industrial practitioners, students, and academic researchers much more efficiently. This will foster further research and applications of Petri nets in aiding the successful implementation of advanced manufacturing systems.

Download or read book Flexible Manufacturing Systems written by Horst Tempelmeier and published by John Wiley & Sons. This book was released on 1993-10-13 with total page 498 pages. Available in PDF, EPUB and Kindle. Book excerpt: Now, this comprehensive and systematic overview of both the design models and quantitative solution methods for FMS support, configuration, and operation rectifies that problem. Students, production managers/planners, and FMS installation planners can now find everything they need in one authoritative and up-to-date source.

Download or read book Design of Flexible Production Systems written by Tullio Tolio and published by Springer Science & Business Media. This book was released on 2008-12-11 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the last decade, the production of mechanical components to be assembled in final products produced in high volumes (e.g. cars, mopeds, industrial vehicles, etc.) has undergone deep changes due to the overall modifications in the way companies compete. Companies must consider competitive factors such as short lead times, tight product tolerances, frequent market changes and cost reduction. Anyway, companies often have to define production objectives as trade-offs among these critical factors since it can be difficult to improve all of them. Even if system flexibility is often considered a fundamental requirement for firms, it is not always a desirable characteristic of a system because it requires relevant investment cost which can jeopardize the profitability of the firm. Dedicated systems are not able to adapt to changes of the product characteristics while flexible systems offer more flexibility than what is needed, thus increasing investment and operative costs. Production contexts characterized by mid to high demand volume of well identified families of products in continuous evolution do not require the highest level of flexibility; therefore, manufacturing system flexibility must be rationalized and it is necessary to find out the best trade-off between productivity and flexibility by designing manufacturing systems endowed with the right level of flexibility required by the production problem. This new class of production systems can be named Focused Flexibility Manufacturing Systems-FFMSs. The flexibility degree in FFMSs is related to their ability to cope with volume, mix and technological changes, and it must take into account both present and future changes. The required level of system flexibility impacts on the architecture of the system and the explicit design of flexibility often leads to hybrid systems, i.e. automated integrated systems in which parts can be processed by both general purpose and dedicated machines. This is a key issue of FFMSs and results from the matching of flexibility and productivity that respectively characterize FMSs and Dedicated Manufacturing Systems (DMSs). The market share of the EU in the machine tool sector is 44%; the introduction of focused flexibility would be particularly important for machine tool builders whose competitive advantage is based on the ability of customizing their systems on the basis of needs of their customers. In fact, even if current production contexts frequently present situations which would fit well with the FFMS approach, tradition and know-how of machine tool builders play a crucial role. Firms often agree with the focused flexibility vision, nevertheless they decide not to pay the risk and efforts related to the design of this new system architecture. This is due also to the lack of well-structured design approaches which can help machine tool builders to configure innovative systems. Therefore, the FFMS topic is studied through the book chapters following a shared mission: "To define methodologies and tools to design production systems with a minimum level of flexibility needed to face, during their lifecycle, the product and process evolution both in the technological and demand aspects. The goal is to find out the optimal trade-off between flexibility and productivity". The book framework follows the architecture which has been developed to address the FFMS Design problem. This architecture is both broad and detailed, since it pays attention to all the relevant levels in a firm hierarchy which are involved in the system design. Moreover, the architecture is innovative because it models both the point of view of the machine tool builder and the point of view of the system user. The architecture starts analyzing Manufacturing Strategy issues and generating the possible demand scenario to be faced. Technological aspects play a key role while solving process plan problems for the products in the part family. Strategic and technological data becomes input when a machine tool builder performs system configuration. The resulting system configurations are possible solutions that a system user considers when planning its system capacity. All the steps of the architecture are deeply studied, developing methods and tools to address each subproblem. Particular attention is paid to the methodologies adopted to face the different subproblems: mathematical programming, stochastic programming, simulation techniques and inverse kinematics have been used. The whole architecture provides a general approach to implement the right degree of flexibility and it allows to study how different aspects and decisions taken in a firm impact on each other. The work presented in the book is innovative because it gives links among different research fields, such as Manufacturing Strategy, Process Plan, System Design, Capacity Planning and Performance Evaluation; moreover, it helps to formalize and rationalize a critical area such as manufacturing system flexibility. The addressed problem is relevant at an academic level but, also, at an industrial level. A great deal of industrial sectors need to address the problem of designing systems with the right degree of flexibility; for instance, automotive, white goods, electrical and electronic goods industries, etc. Attention to industrial issues is confirmed by empirical studies and real case analyses which are presented within the book chapters.

Download or read book Robotics and Automation in the Food Industry written by Darwin G Caldwell and published by Elsevier. This book was released on 2012-12-03 with total page 527 pages. Available in PDF, EPUB and Kindle. Book excerpt: The implementation of robotics and automation in the food sector offers great potential for improved safety, quality and profitability by optimising process monitoring and control. Robotics and automation in the food industry provides a comprehensive overview of current and emerging technologies and their applications in different industry sectors.Part one introduces key technologies and significant areas of development, including automatic process control and robotics in the food industry, sensors for automated quality and safety control, and the development of machine vision systems. Optical sensors and online spectroscopy, gripper technologies, wireless sensor networks (WSN) and supervisory control and data acquisition (SCADA) systems are discussed, with consideration of intelligent quality control systems based on fuzzy logic. Part two goes on to investigate robotics and automation in particular unit operations and industry sectors. The automation of bulk sorting and control of food chilling and freezing is considered, followed by chapters on the use of robotics and automation in the processing and packaging of meat, seafood, fresh produce and confectionery. Automatic control of batch thermal processing of canned foods is explored, before a final discussion on automation for a sustainable food industry.With its distinguished editor and international team of expert contributors, Robotics and automation in the food industry is an indispensable guide for engineering professionals in the food industry, and a key introduction for professionals and academics interested in food production, robotics and automation. - Provides a comprehensive overview of current and emerging robotics and automation technologies and their applications in different industry sectors - Chapters in part one cover key technologies and significant areas of development, including automatic process control and robotics in the food industry and sensors for automated quality and safety control - Part two investigates robotics and automation in particular unit operations and industry sectors, including the automation of bulk sorting and the use of robotics and automation in the processing and packaging of meat, seafood, fresh produce and confectionery

Download or read book Heuristic Scheduling Systems written by Thomas E. Morton and published by John Wiley & Sons. This book was released on 1993-09-10 with total page 718 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reflects exact and heuristic methods of scheduling techniques suitable for creating customized sequencing and scheduling systems for flexible manufacturing, project management, group and cellular manufacturing operations. Summarizes complex computational studies demonstrating how they work in practice. Contains new theories and techniques developed by the author. Includes a software disk to reinforce and practice the methods described.

Download or read book Gcmm 2004 written by Prasad K. D. V. Yarlagadda and published by Alpha Science Int'l Ltd.. This book was released on 2005 with total page 718 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents research and case studies from over 200 Manufacturing Professionals across the globe in the area of: Manufacturing Process; Materials; Metrology; Finite Element Methods; Industrial Engineering; Optimization; Quality; and Supply Chain Management.

Download or read book Handbook on Scheduling written by Jacek Błażewicz and published by Springer Science & Business Media. This book was released on 2007-06-12 with total page 654 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a theoretical and application-oriented analysis of deterministic scheduling problems in advanced planning and computer systems. The text examines scheduling problems across a range of parameters: job priority, release times, due dates, processing times, precedence constraints, resource usage and more, focusing on such topics as computer systems and supply chain management. Discussion includes single and parallel processors, flexible shops and manufacturing systems, and resource-constrained project scheduling. Many applications from industry and service operations management and case studies are described. The handbook will be useful to a broad audience, from researchers to practitioners, graduate and advanced undergraduate students.

Download or read book Modeling Simulation And Control Of Flexible Manufacturing Systems A Petri Net Approach written by Kurapati Venkatesh and published by World Scientific. This book was released on 1999-01-29 with total page 429 pages. Available in PDF, EPUB and Kindle. Book excerpt: One critical barrier leading to successful implementation of flexible manufacturing and related automated systems is the ever-increasing complexity of their modeling, analysis, simulation, and control. Research and development over the last three decades has provided new theory and graphical tools based on Petri nets and related concepts for the design of such systems. The purpose of this book is to introduce a set of Petri-net-based tools and methods to address a variety of problems associated with the design and implementation of flexible manufacturing systems (FMSs), with several implementation examples.There are three ways this book will directly benefit readers. First, the book will allow engineers and managers who are responsible for the design and implementation of modern manufacturing systems to evaluate Petri nets for applications in their work. Second, it will provide sufficient breadth and depth to allow development of Petri-net-based industrial applications. Third, it will allow the basic Petri net material to be taught to industrial practitioners, students, and academic researchers much more efficiently. This will foster further research and applications of Petri nets in aiding the successful implementation of advanced manufacturing systems.

Download or read book Manufacturing Flexible Packaging written by Thomas Dunn and published by William Andrew. This book was released on 2014-09-04 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: Efficiently and profitably delivering quality flexible packaging to the marketplace requires designing and manufacturing products that are both "fit-to-use" and "fit-to-make". The engineering function in a flexible packaging enterprise must attend to these dual design challenges. Flexible Packaging discusses the basic processes used to manufacture flexible packaging products, including rotogravure printing, flexographic printing, adhesive lamination, extrusion lamination/coating; and finishing/slitting. These processes are then related to the machines used to practice them, emphasising the basics of machines’ control systems , and options to minimize wasted time and materials between production jobs. Raw materials are also considered, including the three basic forms: Rollstock (paper, foil, plastic films); Resin; and Wets (inks, varnishes, primers). Guidance is provided on both material selection, and on adding value through enhancement or modification of the materials’ physical features. A ‘measures’ section covers both primary material features – such as tensile, elongation, modulus and elastic and plastic regions – and secondary quality characteristics such as seal and bond strengths, coefficient of friction, oxygen barrier and moisture vapour barrier. Helps engineers improve existing raw material selection and manufacturing processes for manufacturing functional flexible packaging materials. Covers all aspects of delivering high value packaging to the customer – from the raw materials, to the methods of processing them, the machines used to do it, and the measures required to gauge the characteristics of the product. Helps engineers to minimize waste and unproductive time in production.

Download or read book Masters Theses in the Pure and Applied Sciences written by Wade H. Shafer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: Masters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS) * at Purdue University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thougtit that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all con cerned if the printing and distribution of the volumes were handled by an interna tional publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Cor poration of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 31 (thesis year 1986) a total of 11 ,480 theses titles trom 24 Canadian and 182 United States universities. We are sure that this broader base tor these titles reported will greatly enhance the value ot this important annual reterence work. While Volume 31 reports theses submitted in 1986, on occasion, certain univer sities do re port theses submitted in previousyears but not reported at the time.

Download or read book Research and Practical Issues of Enterprise Information Systems II Volume 1 written by Li D. Xu and published by Springer Science & Business Media. This book was released on 2007-10-09 with total page 810 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents work from the IFIP TC 8 WG 8.9 International Conference on the Research and Practical Issues of Enterprise Information Systems (CONFENIS 2007). Enterprise information systems (EIS) have become increasingly popular. EIS integrate and support business processes across functional boundaries in a supply chain environment. In recent years, more and more enterprises world-wide have adopted EIS such as Enterprise Resource Planning (ERP) for running their businesses.

Download or read book New Directions for Operations Research in Manufacturing written by Günter Fandel and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 527 pages. Available in PDF, EPUB and Kindle. Book excerpt: Basically five problems areas are addressed by operations research specialists in the manufacturing domain: theore- tical and practical aspectsin production planning, facility layout, inventory control, tool management and scheduling. Some of these problems can be solved off-line, while others must be treated as real-time problems impacted by the changing state of the system. Additionally, all of these problems have to be dealt with in an integrated systems framework. Several new topics have recently appeared in the scientific literature which now attract the interest of operations researchers. These include distributed real-time scheduling, hierarchical and heterarchical control systems, integrated algorithms for design, process planning, and equipment level programming, material handling in a finite capacity resource environment, and designing and implementing distributed data management systems. The contributions of these proceedings represent new andunique theoretical developments and applications related to these new topics. They deal with modelling production structures and applying expert systems or neural networks to production systems. Mathematical programming, control theory, simulation, genetic algorithms, tabu search, and simulated annealing are applied as solutiton techniques.

Download or read book Proceedings of the 5th International Conference on Flexible Manufacturing Systems written by Keith Rathmill and published by Springer. This book was released on 2013-11-27 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Enabling Manufacturing Competitiveness and Economic Sustainability written by Michael F. Zaeh and published by Springer Science & Business Media. This book was released on 2013-09-12 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: The changing manufacturing environment requires more responsive and adaptable manufacturing systems. The theme of the 5th International Conference on Changeable, Agile, Reconfigurable and Virtual production (CARV2013) is "Enabling Manufacturing Competitiveness and Economic Sustainability. Leading edge research and best implementation practices and experiences, which address these important issues and challenges, are presented. The proceedings include advances in manufacturing systems design, planning, evaluation, control and evolving paradigms such as mass customization, personalization, changeability, re-configurability and flexibility. New and important concepts such as the dynamic product families and platforms, co-evolution of products and systems, and methods for enhancing manufacturing systems' economic sustainability and prolonging their life to produce more than one product generation are treated. Enablers of change in manufacturing systems, production volume and capability, scalability and managing the volatility of markets, competition among global enterprises and the increasing complexity of products, manufacturing systems and management strategies are discussed. Industry challenges and future directions for research and development needed to help both practitioners and academicians are presented. About the Editor Prof. Dr.-Ing. Michael F. Zaeh, born in 1963, has been and is Professor for and Manufacturing Technology since 2002 and, together with Prof. Dr.-Ing. Gunther Reinhart, Head of the Institute for Machine Tools and Industrial Management (iwb) at the Technische Universitaet Muenchen (TUM). After studying general mechanical engineering, he was doctoral candidate under Prof. Dr.-Ing. Joachim Milberg at TUM from 1990 until 1993 and received his doctorate in 1993. From 1994 to 1995, he was department leader under Prof. Dr.-Ing. Gunther Reinhart. From 1996 to 2002, he worked for a machine tool manufacturer in several positions, most recently as a member of the extended management. Prof. Dr.-Ing. Michael F. Zaeh is an associated member of the CIRP and member of acatech, WGP and WLP. His current researches include among others Joining and Cutting Technologies like Laser Cutting and Welding as well as Friction Stir Welding, Structural Behaviour and Energy Efficiency of Machine Tools and Manufacturing Processes like Additive Manufacturing.

Download or read book Business Process Management written by Wil, van der Aalst and published by Springer. This book was released on 2003-07-31 with total page 399 pages. Available in PDF, EPUB and Kindle. Book excerpt: Business processes are among today's hottest topics in the science and practice of information systems. Business processes and workflow management systems attract a lot of attention from R&D professionals in software engineering, information systems, business-oriented computer science, and management sciences. The carefully reviewed chapters contributed to this state-of-the-art survey by internationally leading scientists consolidate work presented at various workshops on the topic organized by the editors of the book in the past few years. The book spans the whole spectrum of business process management ranging from theoretical aspects, conceptual models, and application scenarios to implementation issues. It will become a valuable source of reference and information for R&D professionals active in the fascinating interdisciplinary area of business process management and for ambitious practitioners.

Download or read book Balanced Automation Systems written by Luis M. Camarinha-Matos and published by Springer. This book was released on 2013-06-05 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: Towards Balanced Automation The concept. Manufacturing industries worldwide are facing tough challenges as a consequence of the globalization of economy and the openness of the markets. Progress of the economic blocks such as the European Union, NAFTA, and MERCOSUR, and the global agreements such as GATT, in addition to their obvious economic and social consequences, provoke strong paradigm shifts in the way that the manufacturing systems are conceived and operate. To increase profitability and reduce the manufacturing costs, there is a recent tendency towards establishing partnership links among the involved industries, usually between big industries and the networks of components' suppliers. To benefit from the advances in technology, similar agreements are being established between industries and universities and research institutes. Such an open tete-cooperation network may be identified as an extended enterprise or a virtual enterprise. In fact, the manufacturing process is no more carried out by a single enterprise, rather each enterprise is just a node that adds some value (a step in the manufacturing chain) to the cooperation network of enterprises. The new trends create new scenarios and technological challenges, especially to the Small and Medium size Enterprises (SMEs) that clearly comprise the overwhelming majority of manufacturing enterprises worldwide. Under the classical scenarios, these SMEs would have had big difficulties to access or benefit from the state of the art technology, due to their limited human, financial, and material resources.

Download or read book Flexible Manufacturing Systems written by Zubair M. Mohamed and published by Routledge. This book was released on 2018-07-27 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: Originally published in 1994 this book undertakes a comprehensive study dealing with the effects of machine flexibility, tool magazine capacity, varying production demands and different oeprating policies on the production planning problems. Performance measures such as FMS flexibility, makespan and inventory are used in evaluating the effects. Three measures of FMS flexibility - actual routing flexibility, potential routing flexibility and capacity flexibility are defined and operationalized.