Download or read book Shelf Life Evaluation of Foods written by Adrian Jones and published by Springer. This book was released on 2012-12-06 with total page 333 pages. Available in PDF, EPUB and Kindle. Book excerpt: The subject of shelf life of foods is not a new one. Increasing consumer interest in food safety, quality and date marking, competitjve pressures from retailers and extensive legislative changes, however, have combined to give the subject a new significance. The proper and correct determina tion of shelf life is of course fundamental to Good Manufacturing Practice (GMP) for the food and drink industry. Manufacturers who aim to produce safe, wholesome and attractive food products 'right the first time' and 'right every time' will already know the importance of proper shelf life evaluation. Incorrect shelf lives can potentially bring about dire legal, safety or financial consequences. This is not to belittle the difficulty of failing to meet consumer expectations consistently as a result of shelf lives that have been arrived at unreliably. A proper evaluation of shelf life must be grounded on sound scientific principles, supported by up-to-date techniques in food science and tech nology. This book, therefore, begins with five chapters reviewing the prin ciples of shelf life evaluation. These are followed by ten chapters on a number of selected food products. All the authors either have first hand experience on the practice of shelf life evaluation or are involved in research of the subject. Because of the diversity and complexity of food products now available, no attempt has been made to cover every product group, let alone every product conceivable.

Download or read book MEMS Materials and Processes Handbook written by Reza Ghodssi and published by Springer Science & Business Media. This book was released on 2011-03-18 with total page 1211 pages. Available in PDF, EPUB and Kindle. Book excerpt: MEMs Materials and Processes Handbook" is a comprehensive reference for researchers searching for new materials, properties of known materials, or specific processes available for MEMS fabrication. The content is separated into distinct sections on "Materials" and "Processes". The extensive Material Selection Guide" and a "Material Database" guides the reader through the selection of appropriate materials for the required task at hand. The "Processes" section of the book is organized as a catalog of various microfabrication processes, each with a brief introduction to the technology, as well as examples of common uses in MEMs.

Download or read book Piezoelectric MEMS Resonators written by Harmeet Bhugra and published by Springer. This book was released on 2017-01-09 with total page 423 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces piezoelectric microelectromechanical (pMEMS) resonators to a broad audience by reviewing design techniques including use of finite element modeling, testing and qualification of resonators, and fabrication and large scale manufacturing techniques to help inspire future research and entrepreneurial activities in pMEMS. The authors discuss the most exciting developments in the area of materials and devices for the making of piezoelectric MEMS resonators, and offer direct examples of the technical challenges that need to be overcome in order to commercialize these types of devices. Some of the topics covered include: Widely-used piezoelectric materials, as well as materials in which there is emerging interest Principle of operation and design approaches for the making of flexural, contour-mode, thickness-mode, and shear-mode piezoelectric resonators, and examples of practical implementation of these devices Large scale manufacturing approaches, with a focus on the practical aspects associated with testing and qualification Examples of commercialization paths for piezoelectric MEMS resonators in the timing and the filter markets ...and more! The authors present industry and academic perspectives, making this book ideal for engineers, graduate students, and researchers.

Download or read book Autonomous Sensor Networks written by Daniel Filippini and published by Springer Science & Business Media. This book was released on 2012-11-27 with total page 429 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume surveys recent research on autonomous sensor networks from the perspective of enabling technologies that support medical, environmental and military applications. State of the art, as well as emerging concepts in wireless sensor networks, body area networks and ambient assisted living introduce the reader to the field, while subsequent chapters deal in depth with established and related technologies, which render their implementation possible. These range from smart textiles and printed electronic devices to implanted devices and specialized packaging, including the most relevant technological features. The last four chapters are devoted to customization, implementation difficulties and outlook for these technologies in specific applications.

Download or read book Materials for Advanced Packaging written by Daniel Lu and published by Springer. This book was released on 2016-11-18 with total page 974 pages. Available in PDF, EPUB and Kindle. Book excerpt: Significant progress has been made in advanced packaging in recent years. Several new packaging techniques have been developed and new packaging materials have been introduced. This book provides a comprehensive overview of the recent developments in this industry, particularly in the areas of microelectronics, optoelectronics, digital health, and bio-medical applications. The book discusses established techniques, as well as emerging technologies, in order to provide readers with the most up-to-date developments in advanced packaging.

Download or read book Implantable Neural Prostheses 1 written by David Zhou and published by Springer Science & Business Media. This book was released on 2009-06-10 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: Significant progress has been made in the development of neural prostheses to restore human functions and improve the quality of human life. Biomedical engineers and neuroscientists around the world are working to improve design and performance of existing devices and to develop novel devices for artificial vision, artificial limbs, and brain–machine interfaces. This book, Implantable Neural Prostheses 1: Devices and Applications,ispart one of a two-book series and describes state-of-the-art advances in techniques associated with implantable neural prosthetic devices and their applications. Devices covered include sensory prosthetic devices, such as visual implants, cochlear implants, auditory midbrain implants, and spinal cord stimulators. Motor prosthetic devices, such as deep brain stimulators, Bion microstimu- tors, the brain control and sensing interface, and cardiac electro-stimulation devices are also included. Progress in magnetic stimulation that may offer a non-invasive approach to prosthetic devices is introduced. Regulatory approval of implantable medical devices in the United States and Europe is also discussed.

Download or read book Particle Detectors written by Hermann Kolanoski and published by Oxford University Press. This book was released on 2020-06-30 with total page 949 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the fundamentals of particle detectors as well as their applications. Detector development is an important part of nuclear, particle and astroparticle physics, and through its applications in radiation imaging, it paves the way for advancements in the biomedical and materials sciences. Knowledge in detector physics is one of the required skills of an experimental physicist in these fields. The breadth of knowledge required for detector development comprises many areas of physics and technology, starting from interactions of particles with matter, gas- and solid-state physics, over charge transport and signal development, to elements of microelectronics. The book's aim is to describe the fundamentals of detectors and their different variants and implementations as clearly as possible and as deeply as needed for a thorough understanding. While this comprehensive opus contains all the materials taught in experimental particle physics lectures or modules addressing detector physics at the Master's level, it also goes well beyond these basic requirements. This is an essential text for students who want to deepen their knowledge in this field. It is also a highly useful guide for lecturers and scientists looking for a starting point for detector development work.

Download or read book Fundamentals of Microfabrication and Nanotechnology Three Volume Set written by Marc J. Madou and published by CRC Press. This book was released on 2018-12-14 with total page 1983 pages. Available in PDF, EPUB and Kindle. Book excerpt: Now in its third edition, Fundamentals of Microfabrication and Nanotechnology continues to provide the most complete MEMS coverage available. Thoroughly revised and updated the new edition of this perennial bestseller has been expanded to three volumes, reflecting the substantial growth of this field. It includes a wealth of theoretical and practical information on nanotechnology and NEMS and offers background and comprehensive information on materials, processes, and manufacturing options. The first volume offers a rigorous theoretical treatment of micro- and nanosciences, and includes sections on solid-state physics, quantum mechanics, crystallography, and fluidics. The second volume presents a very large set of manufacturing techniques for micro- and nanofabrication and covers different forms of lithography, material removal processes, and additive technologies. The third volume focuses on manufacturing techniques and applications of Bio-MEMS and Bio-NEMS. Illustrated in color throughout, this seminal work is a cogent instructional text, providing classroom and self-learners with worked-out examples and end-of-chapter problems. The author characterizes and defines major research areas and illustrates them with examples pulled from the most recent literature and from his own work.

Download or read book Mobile Communication Networks 5G and a Vision of 6G written by Mladen Božanić and published by Springer Nature. This book was released on 2021-02-15 with total page 335 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contributes to the body of scholarly knowledge by exploring the main ideas of wireless networks of past, present, and future, trends in the field of networking, the capabilities of 5G and technologies that are potential enablers of 6G, potential 6G applications and requirements, as well as unique challenges and opportunities that 6G research is going to offer over the next decade. It covers research topics such as communication via millimeter-waves, terahertz waves and visible light to enable faster speeds, as well as research into achieving other basic requirements of 6G networks. These include low end-to-end latency, high energy efficiency, coverage that is ubiquitous and always-on, integration of terrestrial wireless with non-terrestrial networks, network management that is made more effective by connected intelligence with machine learning capabilities, as well as support for the evolution of old service classes and support for new ones.

Download or read book Modern Sensors Handbook written by Pavel Ripka and published by John Wiley & Sons. This book was released on 2013-03-01 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern sensors working on new principles and/or using new materials and technologies are more precise, faster, smaller, use less power and are cheaper. Given these advantages, it is vitally important for system developers, system integrators and decision makers to be familiar with the principles and properties of the new sensor types in order to make a qualified decision about which sensor type to use in which system and what behavior may be expected. This type of information is very difficult to acquire from existing sources, a situation this book aims to address by providing detailed coverage on this topic. In keeping with its practical theme, the discussion concentrates on sensor types used or having potential to be used in industrial applications.

Download or read book Implantable Sensors and Systems written by Guang-Zhong Yang and published by Springer. This book was released on 2018-03-27 with total page 649 pages. Available in PDF, EPUB and Kindle. Book excerpt: Implantable sensing, whether used for transient or long-term monitoring of in vivo physiological, bio-electrical, bio-chemical and metabolic changes, is a rapidly advancing field of research and development. Underpinned by increasingly small, smart and energy efficient designs, they become an integral part of surgical prostheses or implants for both acute and chronic conditions, supporting optimised, context aware sensing, feedback, or stimulation with due consideration of system level impact. From sensor design, fabrication, on-node processing with application specific integrated circuits, to power optimisation, wireless data paths and security, this book provides a detailed explanation of both the theories and practical considerations of developing novel implantable sensors. Other topics covered by the book include sensor embodiment and flexible electronics, implantable optical sensors and power harvesting. Implantable Sensors and Systems – from Theory to Practice is an important reference for those working in the field of medical devices. The structure of the book is carefully prepared so that it can also be used as an introductory reference for those about to enter into this exciting research and developing field.

Download or read book MEMS MOEM Packaging written by Ken Gilleo and published by McGraw Hill Professional. This book was released on 2005-08-01 with total page 239 pages. Available in PDF, EPUB and Kindle. Book excerpt: While MEMS technology has progressed rapidly, commercialization of MEMS has been hindered by packaging technology barriers and costs. One of the key issues in the industrialization of MEMS, MOEM and ultimately Nanoelectrical devices is the development of appropriate packaging solutions for the protection, assembly, and long term reliable operation. This book rigorously examines the properties of the materials used in MEMS and MOEN assembly then evaluates them in terms of their routing, electrical performance, thermal management and reliability. With this as a starting point, the book moves on to discuss advanced packaging methods such as: molded thermoplastic packages for MEMS, wafer-assembled RFID, and wafer-level stacked packaging.

Download or read book Piezoresistor Design and Applications written by Joseph C. Doll and published by Springer Science & Business Media. This book was released on 2013-10-30 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: Piezoresistor Design and Applications provides an overview of these MEMS devices and related physics. The text demonstrates how MEMS allows miniaturization and integration of sensing as well as efficient packaging and signal conditioning. This text for engineers working in MEMS design describes the piezoresistive phenomenon and optimization in several applications. Includes detailed discussion of such topics as; coupled models of mechanics, materials and electronic behavior in a variety of common geometric implementations including strain gages, beam bending, and membrane loading. The text concludes with an up-to-date discussion of the need for integrated MEMS design and opportunities to leverage new materials, processes and MEMS technology. Piezoresistor Design and Applications is an ideal book for design engineers, process engineers and researchers.

Download or read book Enabling the Internet of Things written by Massimo Alioto and published by Springer. This book was released on 2017-01-23 with total page 527 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers the first comprehensive view on integrated circuit and system design for the Internet of Things (IoT), and in particular for the tiny nodes at its edge. The authors provide a fresh perspective on how the IoT will evolve based on recent and foreseeable trends in the semiconductor industry, highlighting the key challenges, as well as the opportunities for circuit and system innovation to address them. This book describes what the IoT really means from the design point of view, and how the constraints imposed by applications translate into integrated circuit requirements and design guidelines. Chapter contributions equally come from industry and academia. After providing a system perspective on IoT nodes, this book focuses on state-of-the-art design techniques for IoT applications, encompassing the fundamental sub-systems encountered in Systems on Chip for IoT: ultra-low power digital architectures and circuits low- and zero-leakage memories (including emerging technologies) circuits for hardware security and authentication System on Chip design methodologies on-chip power management and energy harvesting ultra-low power analog interfaces and analog-digital conversion short-range radios miniaturized battery technologies packaging and assembly of IoT integrated systems (on silicon and non-silicon substrates). As a common thread, all chapters conclude with a prospective view on the foreseeable evolution of the related technologies for IoT. The concepts developed throughout the book are exemplified by two IoT node system demonstrations from industry. The unique balance between breadth and depth of this book: enables expert readers quickly to develop an understanding of the specific challenges and state-of-the-art solutions for IoT, as well as their evolution in the foreseeable future provides non-experts with a comprehensive introduction to integrated circuit design for IoT, and serves as an excellent starting point for further learning, thanks to the broad coverage of topics and selected references makes it very well suited for practicing engineers and scientists working in the hardware and chip design for IoT, and as textbook for senior undergraduate, graduate and postgraduate students ( familiar with analog and digital circuits).

Download or read book Inertial Microsensors written by Andrei Shkel and published by Springer. This book was released on 2016-12-07 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: This excellent volume lays out methods for the analysis and design of inertial micromachined sensors. The aim of the book is to provide readers with a solid foundation in the theory of inertial measurement, introduce them to design fundamentals, and provide them with design recipes for implementation of inertial instruments on the micro-scale. All of the discussions in the book are supported by constructive computational examples illustrating the material.

Download or read book Handbook of Mems for Wireless and Mobile Applications written by Deepak Uttamchandani and published by Elsevier. This book was released on 2013-08-31 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt: The increasing demand for mobile and wireless sensing necessitates the use of highly integrated technology featuring small size, low weight, high performance and low cost: micro-electro-mechanical systems (MEMS) can meet this need. The Handbook of MEMS for wireless and mobile applications provides a comprehensive overview of radio frequency (RF) MEMS technologies and explores the use of these technologies over a wide range of application areas.Part one provides an introduction to the use of RF MEMS as an enabling technology for wireless applications. Chapters review RF MEMS technology and applications as a whole before moving on to describe specific technologies for wireless applications including passive components, phase shifters and antennas. Packaging and reliability of RF MEMS is also discussed. Chapters in part two focus on wireless techniques and applications of wireless MEMS including biomedical applications, such as implantable MEMS, intraocular pressure sensors and wireless drug delivery. Further chapters highlight the use of RF MEMS for automotive radar, the monitoring of telecommunications reliability using wireless MEMS and the use of optical MEMS displays in portable electronics.With its distinguished editor and international team of expert authors, the Handbook of MEMS for wireless and mobile applications is a technical resource for MEMS manufacturers, the electronics industry, and scientists, engineers and academics working on MEMS and wireless systems. - Reviews the use of radio frequency (RF) MEMS as an enabling technology for wireless applications - Discusses wireless techniques and applications of wireless MEMS, including biomedical applications - Describes monitoring structures and the environment with wireless MEMS

Download or read book Electroceramic Based MEMS written by Nava Setter and published by Springer Science & Business Media. This book was released on 2006-03-30 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is focused on the use of functional oxide and nitride films to enlarge the application range of MEMS (microelectromechanical systems), including micro-sensors, micro-actuators, transducers, and electronic components for microwaves and optical communications systems. Applications, emerging applications, fabrication technology and functioning issues are presented and discussed. The book covers the following topics: Part A: Applications and devices with electroceramic-based MEMS: Chemical microsensors Microactuators based on thin films Micromachined ultrasonic transducers Thick-film piezoelectric and magnetostrictive devices Pyroelectric microsystems RF bulk acoustic wave resonators and filters High frequency tunable devices MEMS for optical functionality Part B: Materials, fabrication technology, and functionality: Ceramic thick films for MEMS Piezoelectric thin films for MEMS Materials and technology in thin films for tunable high frequency devices Permittivity, tunability and loss in ferroelectrics for reconfigurable high frequency electronics Microfabrication of piezoelectric MEMS Nano patterning methods for electroceramics Soft lithography emerging techniques The book is addressed to engineers, scientists and researchers of various disciplines, device engineers, materials engineers, chemists, physicists and microtechnologists who are working and/or interested in this fast growing and highly promising field. The publication of this book follows a Special Issue on electroceramic-based MEMS that was published in the Journal of Electroceramics at the beginning of 2004. The ten invited papers of that special issue were adapted by the authors into chapters of the present book and five additional chapters were added.