Download or read book A Laboratory Guide to Somatic Embryogenesis in Spruce and Larch written by Marie-Anne Lelu and published by [Chalk River, Ont.] : Petawawa National Forestry Institute. This book was released on 1993 with total page 68 pages. Available in PDF, EPUB and Kindle. Book excerpt: Somatic embryogenesis is a tissue culture process that mimics zygotic embryogenesis, resulting in the production of somatic embryos that mature, germinate, and form plantlets. This guide was assembled to assist those who want to use the process with spruce and larch. It covers all the important steps in the production of embryogenic tissue and in plantlet regeneration. In each section, the literature published on the topic under consideration is reviewed. The guide also covers special applications such as protoplast isolation from embryogenic cell lines and cryopreservation of tissues.
Download or read book Somatic Embryogenesis in Woody Plants written by S. Mohan Jain and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 385 pages. Available in PDF, EPUB and Kindle. Book excerpt: These books provide an update to progress on somatic embryogenesis in woody plants including both angiosperm and gymnosperm trees. In the past, most of the information on this subject was scattered in proceedings volumes, journals, biotechnology books, etc. It has been difficult for the researchers and students to obtain comprehensive information on this rapidly growing subject from a single source. These books enable readers to get a clear view of this subject on historical, anatomical, physiological, biochemical and molecular aspects, and applications including protoplasts, cryopreservation, manufactured seed (artificial seed), genetic transformation, bioreactors, mutations, and future uses in forest plantations. Each selected woody plant mentioned in the book is briefly introduced first, covering botany and genetics, importance and geographical distribution, breeding problems, and in vitro propagation and problems of each selected woody plant and then is followed by the description on the initiation and maintenance of embryogenic cultures, embryo development and germination, and field trials (if any) of these plants. These books are meant for graduate students and researchers in forestry and horticulture as well as biotechnologists.
Download or read book Ecology and Management of Larix Forests written by and published by . This book was released on 1995 with total page 542 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book General Technical Report INT written by and published by . This book was released on 1995 with total page 550 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Cryopreservation of Plant Germplasm I written by Y. P. S. Bajaj and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt: The germ plasm of numerous plant species, especially those of forest trees, some agricultural crops, and medicinal plants, is endangered and threatened with extinction. This depletion of germplasm pools and the shrinkage of naturally occurring genetic resources have caused international concern. Conventionally, the germplasm of plants is conserved through seeds, tubers, roots, corms, rhizomes, bulbs, cuttings, etc. However, the germ plasm of a number of trees and plantation crops (such as coconut, cocao, coffee, oil palm, rubber, mango, horse chestnut, etc. ) cannot be preserved since their seed are short-lived (recalcitrant). Likewise, germplasm of vegetatively propagated crops (such as potato and cassava) cannot be stored on a long term basis and has to be grown and multiplied periodically in nurseries and fields. The plants are thus exposed to unpredictable weather conditions and diseases, with the result that instances are known where entire genetic stocks are lost. Therefore, unconventional methods are being developed for the storage and international exchange of germplasm. For this purpose in vitro cultures have been employed, but they can only enable short-to medium term preservation; moreover, cell cultures upon repeated subculture undergo genetic erosion. In view of the recent developments in the in vitro induction of genetic variability through somaclonal variation, somatic hybridization, recombinant DNA technology, etc. , new methods need to be employed for the storage of desirable cultures. In this regard freeze preservation of cells in liquid nitrogen (-196 0q, like that of semen, enables long-term storage, theoretically, for an indefinite period of time.
Download or read book Plant Tissue Culture Manual written by K. Lindsey and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 138 pages. Available in PDF, EPUB and Kindle. Book excerpt: This manual comprises a range of techniques for research workers in the fields of cell and molecular biology, physiology, plant breeding and propagation, and genetic engineering.
Download or read book The Woody Plant Seed Manual written by United States. Forest Service and published by Forest Service. This book was released on 2008 with total page 1240 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Forest Products Biotechnology written by Alan Bruce and published by CRC Press. This book was released on 2002-09-10 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industries are developing radical, new biotechnology processes to expand and develop their range of products that originate from the world's forests. As a result of the growing understanding of the process involved, biotechnology is also helping reduce any adverse impact on the environment.; This book presents a review of specialist research directed towards efficient and environmentally sensitive use of forests. An introductory chapter explaining the structure and anatomy of wood is followed by a chapter-by-chapter review of the most current developments on individual topics associated with a wide range of forest products such as timber, trees, pulp and paper, drugs and valuable chemicals. In addition, chapters focus on the ways of resolving some of the environmental problems faced by these industries.
Download or read book Seed Technology and Its Biological Basis written by Michael Black and published by CRC Press. This book was released on 2000 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: Edited by a renowned seed biologist with a team assembled from the most respected laboratories worldwide, Seed Technology and Its Biological Basis illustrates the commercial value of seeds as a major resource. The editors provide a sweeping overview of the current state-of-the-art in seed technology and its biological basis. The book is invaluable to researchers and professionals in both the industrial and academic sectors.
Download or read book Plant Protoplasts and Genetic Engineering V written by Professor Dr. Y. P. S. Bajaj and published by Springer Science & Business Media. This book was released on 2013-03-14 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: In continuation of Volumes 8, 9, 22, and 23, this new volume deals with the regeneration of plants from isolated protoplasts and genetic transformation in various species of Actinidia, Allocasuarina, Anthurium, Antirrhinum, Asparagus, Beta, Brassica, Carica, Casuarina, Cyphomandra, Eucalyptus, Ipomoea, Larix, Limonium, Liriodendron, Malus, Musa, Physcomitrella, Physalis, Picea, Rosa, Tagetes, Triticum, and Ulmus. These studies reflect the far-reaching implications of protoplast technology in genetic engineering of plants. The book contains a wealth of useful information for advanced students, teachers, and researchers in the field of plant tissue culture, molecular biology, genetic engineering, plant breeding, and general biotechnology.
Download or read book Plant Tissue Culture Manual Supplement 7 written by K. Lindsey and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 903 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plant tissue culture has a long history, dating back to the work of Gottlieb Haberlandt and others at the end of the 19th century, but the associated concepts and techniques have reached a level of usefulness and application which has never been greater. The technical innovations have given new insights into fundamental aspects of plant differentiation and development, and have paved the way to the identification of strategies for the genetic manipula tion of plants. It is the aim of this manual to deliver a broad range of these techniques in a form which is accessible to students and research scientists of diverse backgrounds, including those with little or no previous experience. The themes of the manual aim to reflect those research areas which have been advanced by tissue culture technology. As was the case for the sister volume Plant Molecular Biology Manual, the objective has been from the start to produce a manual which is at home on the laboratory bench. The plastic-covered, ring-bound format has proved to be most popular and is retained here. Equally, the emphasis has been on producing a collection of detailed step-by-step protocols, each supplemented with an introductory text and practical footnotes, to provide the next best thing to a supervisor at one's shoulder.
Download or read book The Woody Plant Seed Manual Agriculture Handbook 727 July 2008 written by and published by . This book was released on 2009 with total page 1240 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Somatic Embryogenesis written by Abdul Mujib and published by Springer Science & Business Media. This book was released on 2006-02-22 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: Somatic embryogenesis, the initiation of embryos from previously differentiated somatic cells, is a unique process in plants. This volume expands our view of a subject that is important for plant biotechnology, genetics, cell biology, development, and agricultural applications. All chapters present the latest research progress, including functional genomic, genetic, and proteomic approaches. A special focus is placed on the effects of stress, environment, and plant growth regulators on embryogenesis. The role of genes such as Leafy Cotyledons and Baby Boom in defining and maintaining cell competence is discussed.
Download or read book Step Wise Protocols for Somatic Embryogenesis of Important Woody Plants written by Shri Mohan Jain and published by Springer. This book was released on 2018-06-11 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: World population is increasing at an alarming rate and this has resulted in increasing tremendously the demand for tree products such as wood for construction materials, fuel and paper, fruits, oils and medicines etc. This has put immense pressure on the world’s supplies of trees and raw material to industry and will continue to do so as long as human population continues to grow. Also, the quality of human diet, especially nutritional components, is adversely affected due to limited genetic improvement of most of fruit trees. Thus there is an immediate need to increase productivity of trees. Improvement has been made through conventional breeding methods, however, conventional breeding is very slow due to long life cycle of trees. A basic strategy in tree improvement is to capture genetic gain through clonal propagation. Clonal propagation via organogenesis is being used for the production of selected elite individual trees. However, the methods are labour intensive, costly, and produce low volumes. Genetic gain can now be captured through somatic embryogenesis. Formation of embryos from somatic cells by a process resembling zygotic embryogenesis is one of the most important features of plants. In 1958, Reinert in Germany and Steward in USA independently reported somatic embryogenesis in carrot cultures. Since then, tremendous progress in somatic embryogenesis of woody and non-woody plants has taken place. It offers a potentially large-scale propagation system for superior clones.
Download or read book Somatic Cell Genetics and Molecular Genetics of Trees written by M.R. Ahuja and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 285 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings is based on a joint meeting of the two IUFRO (International Union of Forestry Research Organizations) Working Parties, Somatic Cell Genetics (S2.04-07) and Molecular Genetics (S2.04-06) held in Gent, Belgium, 26-30 September, 1995. Although a joint meeting of the two Working Parties had been discussed in the past, this was the first such meeting that became a successful reality. In fact this meeting provided an excellent forum for discussions and interactions in forest bioteclUlology that encouraged the participants to vote for a next joint meeting. In the past decade rapid progress has been made in the somatic cell genetics and molecular genetics of forest trees. In order to cover recent developments in the broad area of biotechnology, the scientific program of the meeting was divided into several sessions. These included somatic embryogenesis, regeneration, transformation, gene expression, molecular markers, genome mapping, and biotic and abiotic stresses. The regeneration of plants, produced by organogenesis or somatic embryogenesis, is necessary not only for mass cloning of forest trees, but also for its application in genetic transformation and molecular biology. Although micropropagation has been achieved from juvenile tissues in a number of forest tree species, in vitro regeneration from mature trees remains a challenging problem in most hardwoods and conifers. The mechanisms involved in the transition from juvenile to mature phase in woody plants are poorly understood. This transition can now be investigated at the molecular level.
Download or read book Somatic Embryogenesis in Woody Plants written by S.M. Jain and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 549 pages. Available in PDF, EPUB and Kindle. Book excerpt: The rapid progress made on somatic embryogenesis and its prospects for potential applications in improving woody plants prompted us to edit this book initially in three volumes, and now to add two more volumes. The editors were all convinced that such a treatise was needed and would be extremely useful to researchers and students. This Volume 4 has been divided into three sections and contains 23 chapters. Section A contains eleven chapters covering studies of embryo development and cell biology of white spruce, proliferative somatic embryogenesis in woody species, somatic embryo germination and desiccation tolerance in conifers, performance of conifer somatic seedlings, apoptosis during early somatic embryogenesis, water relation parameters in conifer embryos, image analysis of somatic embryos, somatic embryogenesis in woody legumes, cold storage and cryopreservation, and commercialization of plant somatic embryogenesis. Section B contains six chapters dealing with angiosperm woody plants, such as somatic embryogenesis in myrtaceous plants, Laurus nobilis, Simarouba glauca, Magnolia spp., Juglans cinera, and somatic embryogenesis and evaluation of variability in somatic seedlings of Quercus serrata by RAPD markers. The chapters contained in Section C are focused on somatic embryogenesis in gymnosperms, including Pinus patula, Encephalartos, Picea wilsonii, Pinus banksiana, hybrid firs, and Taxus. All the chapters have been peer-reviewed and revised accordingly to improve their quality.
Download or read book Advances in Food Bioproducts and Bioprocessing Technologies written by Monica Lizeth Chavez-Gonzalez and published by CRC Press. This book was released on 2019-10-16 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book explores and exploits the synergy and boundary between biotechnology, bioprocessing and food engineering. Divided into three parts, Advances in Food Bioproducts and Bioprocessing Technologies includes contributions that deal with new developments in procedures, bioproducts, and bioprocesses that can be given quantitative expression. Its 40 chapters will describe how research results can be used in engineering design, include procedures to produce food additives and ingredients, and discuss accounts of experimental or theoretical research and recent advances in food bioproducts and bioprocessing technologies.
