Download or read book A HIGH STEP UP THREE PORT DC DC CONVERTER FOR STAND ALONE PV BATTERY POWER SYSTEMS WITH GRID CONNECTED MODE written by N. MALLA REDDY and published by Lulu.com. This book was released on 2016-06-13 with total page 94 pages. Available in PDF, EPUB and Kindle. Book excerpt: Integrated multiport converters for interfacing several power sources and storage devices are widely used in recent years. Instead of using individual power electronic converters for each of the energy sources, multiport converters have the advantages including less components, lower cost, more compact size, and better dynamic performance. In many cases, at least one energy storage device should be incorporated. So, it is very important for the port connected to the energy storage to allow bidirectional power flow.

Download or read book Smart Grids for Smart Cities Volume 1 written by O. V. Gnana Swathika and published by John Wiley & Sons. This book was released on 2023-07-12 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: SMART GRIDS for SMART CITIES Written and edited by a team of experts in the field, this first volume in a two-volume set focuses on an interdisciplinary perspective on the financial, environmental, and other benefits of smart grid technologies and solutions for smart cities. What makes a regular electric grid a “smart” grid? It comes down to digital technologies that enable two-way communication between a utility and its customers, as opposed to the traditional electric grid, where power flows in one direction. Based on statistics and available research, smart grids globally attract the largest investment venues in smart cities. Smart grids and city buildings that are connected in smart cities contribute to significant financial savings and improve the economy. The smart grid has many components, including controls, computers, automation, and new technologies and equipment working together. These technologies cooperate with the electrical grid to respond digitally to our quickly changing electric demand. The investment in smart grid technology also has certain challenges. The interconnected feature of smart grids is valuable, but it tremendously increases their susceptibility to threats. It is crucial to secure smart grids wherein many technologies are employed to increase real-time situational awareness and the ability to support renewables, as well as system automation to increase the reliability, efficiency, and safety of the electric grid. This exciting new volume covers all of these technologies, including the basic concepts and the problems and solutions involved with the practical applications in the real world. Whether for the veteran engineer or scientist, the student, or a manager or other technician working in the field, this volume is a must-have for any library.

Download or read book Intelligence in Big Data Technologies Beyond the Hype written by J. Dinesh Peter and published by Springer Nature. This book was released on 2020-07-25 with total page 625 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a compendium of the proceedings of the International Conference on Big-Data and Cloud Computing. The papers discuss the recent advances in the areas of big data analytics, data analytics in cloud, smart cities and grid, etc. This volume primarily focuses on the application of knowledge which promotes ideas for solving problems of the society through cutting-edge big-data technologies. The essays featured in this proceeding provide novel ideas that contribute for the growth of world class research and development. It will be useful to researchers in the area of advanced engineering sciences.

Download or read book Advances in Manufacturing Automation Design and Energy Technologies written by N. M. Sivaram and published by Springer Nature. This book was released on 2023-07-30 with total page 808 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises the proceedings of the 2nd International Conference on Future Technologies in Manufacturing, Automation, Design and Energy 2021. The contents of this book focus on recent technological advances in the field of manufacturing, automation, design and energy. Some of the topics covered include additive manufacturing, renewable energy resources, design automation, process automation and monitoring, etc. This book proves to be a valuable resource for those in academia and industry.

Download or read book Attainment of SDGs through the Advancement in Solar PV systems written by Praveen Kumar Balachandran and published by Frontiers Media SA. This book was released on 2024-11-15 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: With less than a decade until we reach 2030, it is crucial to address the deep inequalities affecting not only our health but also our quality of life, and the economy of countries worldwide. Few of the UN's Sustainable Development Goals (SDGs) can be directly and indirectly achieved through the implementation of renewable energy systems, with a significant role being played by solar photovoltaic (PV) systems. Solar PV systems are considered one of the most efficient methods of providing clean electrical energy, which is vital to attaining these goals. Numerous researchers across the globe are currently focusing on improving efficiency, reducing costs, recycling, reconfiguring, and developing materials for solar PV systems. By utilizing renewable energy systems for daily needs such as power generation, agriculture, EV charging, among others, we can contribute to effectively achieving the SDGs. However, it is essential to assess and highlight the level of attainment of SDGs in ongoing research of solar PV systems. This topic aims to provide a comprehensive analysis of the goals and bridge the gap between research and the aim of research in SDGs.

Download or read book Advanced DC DC Power Converters and Switching Converters written by Salvatore Musumeci and published by MDPI. This book was released on 2021-03-30 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nowadays, power electronics is an enabling technology in the energy development scenario. Furthermore, power electronics is strictly linked with several fields of technological growth, such as consumer electronics, IT and communications, electrical networks, utilities, industrial drives and robotics, and transportation and automotive sectors. Moreover, the widespread use of power electronics enables cost savings and minimization of losses in several technology applications required for sustainable economic growth. The topologies of DC–DC power converters and switching converters are under continuous development and deserve special attention to highlight the advantages and disadvantages for use increasingly oriented towards green and sustainable development. DC–DC converter topologies are developed in consideration of higher efficiency, reliable control switching strategies, and fault-tolerant configurations. Several types of switching converter topologies are involved in isolated DC–DC converter and nonisolated DC–DC converter solutions operating in hard-switching and soft-switching conditions. Switching converters have applications in a broad range of areas in both low and high power densities. The articles presented in the Special Issue titled "Advanced DC-DC Power Converters and Switching Converters" consolidate the work on the investigation of the switching converter topology considering the technological advances offered by innovative wide-bandgap devices and performance optimization methods in control strategies used.

Download or read book DC DC Converter Topologies written by Gerry Moschopoulos and published by John Wiley & Sons. This book was released on 2024-01-31 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive look at DC-DC converters and advanced power converter topologies for all skills levels As it can be rare for source voltage to meet the requirements of a Direct Current (DC) load, DC-DC converters are essential to access service. DC-DC power converters employ power semiconductor devices (like MOSFETs and IGBTs) as switches and passive elements such as capacitors, inductors, and transformers to alter the voltage provided by a DC source into the necessary DC voltage as is required by a DC load. This source can be a battery, solar panels, fuel cells, or a DC bus voltage fed by rectified AC utility voltage. As the many components of DC-DC converters can be differently arranged into circuit structures called topologies, there are as many possible circuit topologies as there are possible combinations of circuit elements. Focusing on DC-DC switch-mode power converters ranging from 50 W to 10kW, DC-DC Converter Topologies provides a survey of all converter topology types within this power range. General principles are described for each topology type using a representative converter as an example. Variations that can be found that differ from the example are then examined, with a helpful discussion of comparisons when relevant. A broad range of topics is covered within the book, from simple, low-power converters to complex, high-power converters and everywhere in between. DC-DC Converter Topologies readers will also find: A detailed discussion of four key DC-DC converter topologies Description of isolated two-switch pulse-width modulated (PWM) topologies including push-pull, half-bridge, and interleaved converters An exploration of high-gain converters such as coupled inductors, voltage multipliers, and switched capacitor converters This book provides the tools so that a non-expert will be equipped to deal with the vast array of DC-DC converters that presently exist. As such, DC-DC Converter Topologies is a useful reference for electrical engineers, professors, and graduate students studying in the field.

Download or read book Power Electronics Step by Step Design Modeling Simulation and Control written by Weidong Xiao and published by McGraw Hill Professional. This book was released on 2021-02-05 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explore the latest power electronics principles, practices, and applications This electrical engineering guide offers comprehensive coverage of design, modeling, simulation, and control for power electronics. The book describes real-world applications for the technology and features case studies worked out in both MATLAB and Simulink. Presented in an accessible style, Power Electronics Step-by-Step: Design, Modeling, Simulation, and Control focuses on the latest technologies, such as DC-based systems, and emphasizes the averaging technique for both simulation and modeling. You will get photos, diagrams, flowcharts, graphs, equations, and tables that illustrate each topic. Circuit components Non-isolated DC/DC conversion Power analysis DC to single-phase AC conversion Single-phase AC to DC conversion Galvanic isolated DC/DC conversion Power conversion for three-phase AC Bidirectional power conversion Averaging model for simulation Dynamic modeling of DC/DC converters Regulation of voltage and current

Download or read book Electrical Conductive Adhesives with Nanotechnologies written by Yi (Grace) Li and published by Springer Science & Business Media. This book was released on 2009-10-08 with total page 445 pages. Available in PDF, EPUB and Kindle. Book excerpt: “Electrical Conductive Adhesives with Nanotechnologies” begins with an overview of electronic packaging and discusses the various adhesives options currently available, including lead-free solder and ECAs (Electrically Conductive Adhesives). The material presented focuses on the three ECA categories specifically, Isotropically Conductive Adhesives (ICAs) Anisotropically Conductive Adhesives/Films (ACA/ACF) and Nonconductive Adhesives/Films (NCA/NCF). Discussing the advantages and limitations of each technique, and how each technique is currently applied. Lastly, a detailed presentation of how nano techniques can be applied to conductive adhesives is discussed, including recent research and development of nano component adhesives/nano component films, their electrical properties, thermal performance, bonding pressure and assembly and reliability.

Download or read book Non Isolated DC DC Converters for Renewable Energy Applications written by Frede Blaabjerg and published by CRC Press. This book was released on 2021-04-22 with total page 205 pages. Available in PDF, EPUB and Kindle. Book excerpt: Photovoltaic (PV) energy generation is an excellent example of large-scale electric power generation through various parallel arrangements of small voltage-generating solar cells or modules. However, PV generation systems require power electronic converters system to satisfy the need for real-time applications or to balance the demand for power from electric. Therefore, a DC-DC power converter is a vital constituent in the intermediate conversion stage of PV power. This book presents a comprehensive review of various non-isolated DC-DC power converters. Non-isolated DC-DC converters for renewable energy system (RES) application presented in this book 1st edition through a detailed original investigation, obtained numerical/experimental results, and guided the scope to design new families of converters: DC-DC multistage power converter topologies, Multistage "X-Y converter family", Nx IMBC (Nx Interleaved Multilevel Boost Converter), Cockcroft Walton (CW) Voltage Multiplier-Based Multistage/Multilevel Power Converter (CW-VM-MPC) converter topologies, and Z-source and quasi Z-source. Above solutions are discussed to show how they can achieve the maximum voltage conversion gain ratio by adapting the passive/active component within the circuits. For assessment, we have recommended novel power converters through their functionality and designs, tested and verified by numerical software. Further, the hardware prototype implementation is carried out through a flexible digital processor. Both numerical and experimental results always shown as expected close agreement with primary theoretical hypotheses. This book offers guidelines and recommendation for future development with the DC-DC converters for RES applications based on cost-effective, and reliable solutions.

Download or read book Photovoltaic Power System written by Weidong Xiao and published by John Wiley & Sons. This book was released on 2017-07-24 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Photovoltaic Power System: Modelling, Design and Control is an essential reference with a practical approach to photovoltaic (PV) power system analysis and control. It systematically guides readers through PV system design, modelling, simulation, maximum power point tracking and control techniques making this invaluable resource to students and professionals progressing from different levels in PV power engineering. The development of this book follows the author's 15-year experience as an electrical engineer in the PV engineering sector and as an educator in academia. It provides the background knowledge of PV power system but will also inform research direction. Key features: Details modern converter topologies and a step-by-step modelling approach to simulate and control a complete PV power system. Introduces industrial standards, regulations, and electric codes for safety practice and research direction. Covers new classification of PV power systems in terms of the level of maximum power point tracking. Contains practical examples in designing grid-tied and standalone PV power systems. Matlab codes and Simulink models featured on a Wiley hosted book companion website.

Download or read book Renewable and Efficient Electric Power Systems written by Gilbert M. Masters and published by John Wiley & Sons. This book was released on 2005-01-03 with total page 676 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a comprehensive textbook for the new trend of distributed power generation systems and renewable energy sources in electric power systems. It covers the complete range of topics from fundamental concepts to major technologies as well as advanced topics for power consumers. An Instructor's Manual presenting detailed solutions to all the problems in the book is available from the Wiley editorial department -- to obtain the manual, send an email to [email protected]

Download or read book Optimization of Photovoltaic Power Systems written by Djamila Rekioua and published by Springer Science & Business Media. This book was released on 2012-01-03 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: Photovoltaic generation is one of the cleanest forms of energy conversion available. One of the advantages offered by solar energy is its potential to provide sustainable electricity in areas not served by the conventional power grid. Optimisation of Photovoltaic Power Systems details explicit modelling, control and optimisation of the most popular stand-alone applications such as pumping, power supply, and desalination. Each section is concluded by an example using the MATLAB® and Simulink® packages to help the reader understand and evaluate the performance of different photovoltaic systems. Optimisation of Photovoltaic Power Systems provides engineers, graduate and postgraduate students with the means to understand, assess and develop their own photovoltaic systems. As such, it is an essential tool for all those wishing to specialise in stand-alone photovoltaic systems. Optimisation of Photovoltaic Power Systems aims to enable all researchers in the field of electrical engineering to thoroughly understand the concepts of photovoltaic systems; find solutions to their problems; and choose the appropriate mathematical model for optimising photovoltaic energy.

Download or read book Introduction to Modern Power Electronics written by Andrzej M. Trzynadlowski and published by John Wiley & Sons. This book was released on 2015-10-19 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides comprehensive coverage of the basic principles and methods of electric power conversion and the latest developments in the field This book constitutes a comprehensive overview of the modern power electronics. Various semiconductor power switches are described, complementary components and systems are presented, and power electronic converters that process power for a variety of applications are explained in detail. This third edition updates all chapters, including new concepts in modern power electronics. New to this edition is extended coverage of matrix converters, multilevel inverters, and applications of the Z-source in cascaded power converters. The book is accompanied by a website hosting an instructor’s manual, a PowerPoint presentation, and a set of PSpice files for simulation of a variety of power electronic converters. Introduction to Modern Power Electronics, Third Edition: Discusses power conversion types: ac-to-dc, ac-to-ac, dc-to-dc, and dc-to-ac Reviews advanced control methods used in today’s power electronic converters Includes an extensive body of examples, exercises, computer assignments, and simulations Introduction to Modern Power Electronics, Third Edition is written for undergraduate and graduate engineering students interested in modern power electronics and renewable energy systems. The book can also serve as a reference tool for practicing electrical and industrial engineers.

Download or read book Power Electronics and Energy Conversion Systems Fundamentals and Hard switching Converters written by Adrian Ioinovici and published by John Wiley & Sons. This book was released on 2013-04-02 with total page 1 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power Electronics and Energy Conversion Systems is a definitive five-volume reference spanning classical theory through practical applications and consolidating the latest advancements in energy conversion technology. Comprehensive yet highly accessible, each volume is organised in a basic-to-sophisticated crescendo, providing a single-source reference for undergraduate and graduate students, researchers and designers. Volume 1 Fundamentals and Hard-switching Converters introduces the key challenges in power electronics from basic components to operation principles and presents classical hard- and soft-switching DC to DC converters, rectifiers and inverters. At a more advanced level, it provides comprehensive analysis of DC and AC models comparing the available approaches for their derivation and results. A full treatment of DC to DC hard-switching converters is given, from fundamentals to modern industrial solutions and practical engineering insight. The author elucidates various contradictions and misunderstandings in the literature, for example, in the treatment of the discontinuous conduction operation or in deriving AC small-signal models of converters. Other key features: • Consolidates the latest advancements in hard-switching converters including discontinuous capacitor voltage mode, and their use in power-factor-correction applications • Includes fully worked design examples, exercises, and case studies, with discussion of the practical consequences of each choice made during the design • Explains all topics in detail with step-by-step derivation of formulas appropriate for energy conversion courses • End-of-section review of the learned material • Includes topics treated in recent journal, conference and industry application coverage on solutions, theory and practical concerns With emphasis on clear explanation, the text offers both a thorough understanding of DC to DC converters for undergraduate and graduate students in power electronics, and more detailed material suitable for researchers, designers and practising engineers working on the development and design of power electronics. This is an accessible reference for engineering and procurement managers from industries such as consumer electronics, integrated circuits, aerospace and renewable energy.

Download or read book Power Electronics for Renewable and Distributed Energy Systems written by Sudipta Chakraborty and published by Springer Science & Business Media. This book was released on 2013-06-12 with total page 612 pages. Available in PDF, EPUB and Kindle. Book excerpt: While most books approach power electronics and renewable energy as two separate subjects, Power Electronics for Renewable and Distributed Energy Systems takes an integrative approach; discussing power electronic converters topologies, controls and integration that are specific to the renewable and distributed energy system applications. An overview of power electronic technologies is followed by the introduction of various renewable and distributed energy resources that includes photovoltaics, wind, small hydroelectric, fuel cells, microturbines and variable speed generation. Energy storage systems such as battery and fast response storage systems are discussed along with application-specific examples. After setting forth the fundamentals, the chapters focus on more complex topics such as modular power electronics, microgrids and smart grids for integrating renewable and distributed energy. Emerging topics such as advanced electric vehicles and distributed control paradigm for power system control are discussed in the last two chapters. With contributions from subject matter experts, the diagrams and detailed examples provided in each chapter make Power Electronics for Renewable and Distributed Energy Systems a sourcebook for electrical engineers and consultants working to deploy various renewable and distributed energy systems and can serve as a comprehensive guide for the upper-level undergraduates and graduate students across the globe.

Download or read book Power Quality Issues written by Suresh Mikkili and published by CRC Press. This book was released on 2018-10-08 with total page 185 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power Quality Issues: Current Harmonics provides solutions for the mitigation of power quality problems related to harmonics. Focusing on active power filters (APFs) due to their excellent harmonic and reactive power compensation in two-wire (single phase), three-wire (three-phase without neutral), and four-wire (three-phase with neutral) AC power networks with nonlinear loads, the text: Introduces the APF technology, describing various APF configurations and offering guidelines for the selection of APFs for specific application considerations Compares shunt active filter (SHAF) control strategies for extracting three-phase reference currents, evaluating their performance under a number of source voltage conditions using a proportional-integral (PI) controller Presents PI controller-based SHAF instantaneous active and reactive power (p-q) and instantaneous active and reactive current (Id-Iq) control strategies, supplying detailed MATLAB®/Simulink simulation results Proposes SHAF control strategies using type 1 and type 2 fuzzy logic controllers (FLCs) with different fuzzy membership functions (MFs), analyzing their harmonic mitigation and DC link voltage regulation Verifies the proposed type 2 FLC-based SHAF control strategies with trapezoidal, triangular, and Gaussian fuzzy MFs using RT-LAB, a real-time digital simulation software from OPAL-RT Technologies Power Quality Issues: Current Harmonics is a useful resource for those tackling electrical power quality challenges. The compensation techniques described in this book alleviate harmonic issues that can distort voltage waveforms, fry a building’s wiring, trigger nuisance tripping, overheat transformer units, and cause random end-user equipment failure.