Download or read book A Handbook of Lattice Spacings and Structures of Metals and Alloys written by W. B. Pearson and published by Elsevier. This book was released on 2013-09-17 with total page 1055 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Handbook of Lattice Spacing and Structures of Metals and Alloys is a 12-chapter handbook that describes the structures and lattice spacings of all binary and ternary alloys. This book starts with an introduction to the accurate determination of structure and lattice spacings. The subsequent chapters deal with the role of structure determination and lattice spacings in alloy formation, as well as the application of this determination to the equilibrium diagram examination. These topics are followed by discussions on the correlation of lattice spacing and magnetic property, including X-ray crystallographic data for those structures allotted a “Strukturbericht type. The remaining chapters contain table lists information about the crystal structures, densities, and expansion coefficients of the elements. These chapters also present further information about lattice spacing and structure determination on metals in alphabetical order. This book is of value to physicists and metallurgists.
Download or read book A Handbook of Lattice Spacings and Structures of Metals and Alloys written by William Burton Pearson and published by . This book was released on 1958 with total page 1068 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Groups IV V and VI Transition Metals and Compounds written by T. F. Connolly and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 219 pages. Available in PDF, EPUB and Kindle. Book excerpt: responsibility.) To Betty Edwards and Emily Copenhaver my thanks for what must have seemed endless typing, retyping and correcting of these bibliographies over a span of years. Availability of Documents U. S. Government contractor reports, usually identified by an alpha-numeric report number, can be purchased from National Technical Information Service U. S. Department of Commerce Springfield, Virginia 22151 and, often, on request from the issuing installation. USAEC reports are also available from International Atomic Energy Agency Kaerntnerring A 1010 Vienna, Austria National Lending Library Boston Spa England Monographs and reports of the National Bureau of Standards are for sale by Superintendent of Documents U. S. Government Printing Office Washington, D. C. 20402 Theses, listed as Dissertation Abstracts + number, are available in North or South America from University Microfilms Dissertation Copies P. O. Box 1764 Ann Arbor, Michigan 48106 and elsewhere from University Microfilms, Ltd. St. John's Road Tylers Green Penn, Buckinghamshire England Other Information Centers and New Journals New journals Information centers Field and and other sources serials Ultra purification 4, 8, 11, 13, 15, 16,19, 20, 9,11,15, 24, 31, 32 and 21, 28, 30, 32, 33, 42, 58, 59 crystal growth ix Preface Field Information centers New journals and and other -sources serials Characterization Miscellaneous 3,4, 8, 11, 13, 16, 19, 20, 1,3,4,8,11,15,17, 21, 26, 28, 30, 31, 32, 33, 35, 24, 25, 28, 29, 30, 31, 37, 38, 39, 40, 42, 46, 53, 56, 32 58, 60, 61, 62
Download or read book The NBS Alloy Data Center written by Gesina C. Carter and published by . This book was released on 1968 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Alloy Data Center, part of the National Standard Reference Data System, has two primary functions. One is to stimulate cooperation and coordination among the existing data centers in the area of the physical properties of well characterized alloys. The final data generated by these centers for publication should be consistent with one another where correlation or possible overlap exists. The other purpose is the collection (from publications as well as private communications), evaluation, and publication of data in some areas where special competence exists in the Alloy Physics Section. Of interest to the center are metals, semimetals, intermetallic compounds, and alloys. Excluded are those materials which have ill-defined constitutions and heat treatments. An automated system was developed to meet the bibliographic needs of the center. This system will be described as well as the specific properties of interest. The system presently contains a complete annotated file dealing with NMR Knight shift measurements. The soft X-ray spectroscopy compilation is being kept up-to-date with the same system. (Author).
Download or read book Plasticity of Boronized Layers written by M. G. Krukovich and published by Springer. This book was released on 2016-08-25 with total page 369 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the physico-technical basis and current state of the technology of boronized layers. Special attention is given to the layer structure and morphology of allocated phases and distributions in a superficial zone of chemical compounds. Two- and multi-component phases of alloys and diffusion processes in a self-organizing mode are discussed. Surface hardening by boronizing increases the life time of mechanical tools. This is important for the mining industry, agriculture, textile and chemical industry. The book is important for thermochemical treatment and surface hardening of metals and alloys.
Download or read book Geological Survey Bulletin written by and published by . This book was released on 1967 with total page 100 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Intrinsic Properties of Group IV Elements and III V II VI and I VII Compounds Intrinsische Eigenschaften Von Elementen Der IV Gruppe und Von III V II VI und I VII Verbindungen written by O. Madelung and published by Springer Science & Business Media. This book was released on 1986-12 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Compound Semiconductor Radiation Detectors written by Alan Owens and published by Taylor & Francis. This book was released on 2016-04-19 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt: For many applications, compound semiconductors are now viable competitors to elemental semiconductors because of their wide range of physical properties. This book describes all aspects of radiation detection and measurement using compound semiconductors, including crystal growth, detector fabrication, contacting, and spectroscopic performance (with particular emphasis on the X- and gamma-ray regimes). A concentrated reference for researchers in various disciplines as well as graduate students in specialized courses, the text outlines the potential and limitations of semiconductor detectors.
Download or read book TMS 2014 143rd Annual Meeting Exhibition Annual Meeting Supplemental Proceedings written by The Minerals, Metals & Materials Society (TMS) and published by Springer. This book was released on 2016-12-16 with total page 1152 pages. Available in PDF, EPUB and Kindle. Book excerpt: These papers present advancements in all aspects of high temperature electrochemistry, from the fundamental to the empirical and from the theoretical to the applied. Topics involving the application of electrochemistry to the nuclear fuel cycle, chemical sensors, energy storage, materials synthesis, refractory metals and their alloys, and alkali and alkaline earth metals are included. Also included are papers that discuss various technical, economic, and environmental issues associated with plant operations and industrial practices.
Download or read book NBS Technical Note written by and published by . This book was released on 1970 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book NBS Special Publication written by and published by . This book was released on 1978 with total page 860 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Ceramics written by Costas Sikalidis and published by BoD – Books on Demand. This book was released on 2011-08-09 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: The current book contains twenty-two chapters and is divided into three sections. Section I consists of nine chapters which discuss synthesis through innovative as well as modified conventional techniques of certain advanced ceramics (e.g. target materials, high strength porous ceramics, optical and thermo-luminescent ceramics, ceramic powders and fibers) and their characterization using a combination of well known and advanced techniques. Section II is also composed of nine chapters, which are dealing with the aqueous processing of nitride ceramics, the shape and size optimization of ceramic components through design methodologies and manufacturing technologies, the sinterability and properties of ZnNb oxide ceramics, the grinding optimization, the redox behaviour of ceria based and related materials, the alloy reinforcement by ceramic particles addition, the sintering study through dihedral surface angle using AFM and the surface modification and properties induced by a laser beam in pressings of ceramic powders. Section III includes four chapters which are dealing with the deposition of ceramic powders for oxide fuel cells preparation, the perovskite type ceramics for solid fuel cells, the ceramics for laser applications and fabrication and the characterization and modeling of protonic ceramics.
Download or read book Stroenie i Svo stva Zhidkikh Metallov written by Aleksandr Mikhaĭlovich Samarin and published by . This book was released on 1962 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Compendium of Phase Diagram Data written by Erwin Rudy and published by . This book was released on 1969 with total page 748 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Thin Films From Free Atoms and Particles written by Kenneth Klabunde and published by Elsevier. This book was released on 2012-12-02 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thin Films from Free Atoms and Particles is an eight-chapter text that describes the primary reaction modes of atoms or coordination-deficient particles. This book presents first an introduction to free atoms and particles, followed by a chapter describing the embryonic growth of films, such as dimers, trimers, and other small telomers formed and detected. The next chapters discuss the understanding of discharge processes for forming free atoms and particles. The remaining chapters deal with the technology, techniques, and materials in thin films. Physicists, engineers, materials scientists, and chemists will find this book of great value.
Download or read book Developments in the Structural Chemistry of Alloy Phases written by B. C. Giessen and published by Springer. This book was released on 2013-12-14 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Lectures on Solid State Physics written by Georg Busch and published by Elsevier. This book was released on 2013-10-22 with total page 555 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lectures on Solid State Physics is a compilation of lectures concerned with various branches of solid state physics. It aims to develop basic physical ideas that lead to a better understanding of phenomena and effects. Comprised of 11 chapters, this book discusses several topics on solid state physics: structure of solids; interference effects in crystals; lattice dynamics; perfect and imperfect crystals; electrons and electron theory of metals; semiconductors; electrical contact effects; transport phenomena, and magnetism. Students, physics graduates, electrical engineers, chemists, and metallurgists will find this book invaluable.
