Download or read book Lloyd s Register Technical Association Session 1996 1997 written by Lloyd's Register Foundation and published by Lloyd's Register . This book was released on 1996-01-01 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Lloyd’s Register Technical Association (LRTA) was established in 1920 with the primary objective of sharing technical expertise and knowledge within Lloyd’s Register. Publications have consistently been released on a yearly basis, with a brief interruption between 1938 and 1946. These publications serve as a key reference point for best practices and were initially reserved for internal use to maximise LR’s competitive advantage. Today, the LRTA takes a fresh approach, focusing on collaboration by combining professional expertise from across LRF & Group to ensure a frequent output of fresh perspectives and relevant content. The LRTA has evolved into a Group-wide initiative that identifies, captures, and shares knowledge spanning various business streams and functions. To support this modern approach, the LRTA has adopted a new structure featuring representatives and senior governance across the business streams and the LR Foundation. The Lloyd's Register Technical Association Papers should be seen as historical documents representing earlier viewpoints and are not reflective of current thinking and perspectives by the current LR Technical Association. The Lloyd's Register Staff Association (LRSA) changed its name to the Lloyd's Register Technical Association (LRTA) in 1973.
Download or read book Hazardous Chemicals Handbook written by P A CARSON and published by Elsevier. This book was released on 2002-03-12 with total page 621 pages. Available in PDF, EPUB and Kindle. Book excerpt: The authors' aim with this handbook, is to provide a rapid ready-reference to help in the often complex task of handling, using and disposing of chemicals safely and with minimum risk to people's health or damage to facilities or to the environment. The book provides look-up data, and concise, clear explanations of general chemical principles, physiochemical and reactive properties, toxicities and exposure limits, flammability characteristics, monitoring techniques, personal protection and other parameters and requirements relating to compliance with designated safe practice, control of risks to people's health and limitation of environmental impact. - Over 600 pages of valuable reference materialIncludes information on physiochemical and reactive properties, toxicities and exposure limits, flammability characteristics, monitoring techniques, personal protection and other parameters and requirements relating to complianceSummarizes core information for quick reference in the workplace or in transit
Download or read book A Guide to the Well Aspects of the Offshore Installations and Wells Design and Construction Etc Regulations 1996 written by Great Britain, Health and Safety Executive Staff and published by . This book was released on 2010-03-19 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Takes into account changes to Offshore Installations and Wells (Design and Construction) Regulations 1996. This guide is suitable for people affected by the regulations, including operators, installation operators, installation owners, employers, and for safety representatives, safety committee members and others involved with offshore activities.
Download or read book A Guide to the Well Aspects of the Offshore Installations and Wells Design and Construction Etc Regulations 1996 written by and published by . This book was released on 1996 with total page 22 pages. Available in PDF, EPUB and Kindle. Book excerpt: The guidance on these regulations is a simple explanation of their main provisions to assist well-operators, installation operators, installation owners, employers, managers, safety representatives, safety committee members and others involved with offshore activities.
Download or read book Safety and Reliability Safe Societies in a Changing World written by Stein Haugen and published by CRC Press. This book was released on 2018-06-15 with total page 3202 pages. Available in PDF, EPUB and Kindle. Book excerpt: Safety and Reliability – Safe Societies in a Changing World collects the papers presented at the 28th European Safety and Reliability Conference, ESREL 2018 in Trondheim, Norway, June 17-21, 2018. The contributions cover a wide range of methodologies and application areas for safety and reliability that contribute to safe societies in a changing world. These methodologies and applications include: - foundations of risk and reliability assessment and management - mathematical methods in reliability and safety - risk assessment - risk management - system reliability - uncertainty analysis - digitalization and big data - prognostics and system health management - occupational safety - accident and incident modeling - maintenance modeling and applications - simulation for safety and reliability analysis - dynamic risk and barrier management - organizational factors and safety culture - human factors and human reliability - resilience engineering - structural reliability - natural hazards - security - economic analysis in risk management Safety and Reliability – Safe Societies in a Changing World will be invaluable to academics and professionals working in a wide range of industrial and governmental sectors: offshore oil and gas, nuclear engineering, aeronautics and aerospace, marine transport and engineering, railways, road transport, automotive engineering, civil engineering, critical infrastructures, electrical and electronic engineering, energy production and distribution, environmental engineering, information technology and telecommunications, insurance and finance, manufacturing, marine transport, mechanical engineering, security and protection, and policy making.
Download or read book Offshore Engineering written by Angus Mather and published by . This book was released on 2000 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Lees Loss Prevention in the Process Industries written by Frank Lees and published by Butterworth-Heinemann. This book was released on 2012-11-05 with total page 3685 pages. Available in PDF, EPUB and Kindle. Book excerpt: Safety in the process industries is critical for those who work with chemicals and hazardous substances or processes. The field of loss prevention is, and continues to be, of supreme importance to countless companies, municipalities and governments around the world, and Lees' is a detailed reference to defending against hazards. Recognized as the standard work for chemical and process engineering safety professionals, it provides the most complete collection of information on the theory, practice, design elements, equipment, regulations and laws covering the field of process safety. An entire library of alternative books (and cross-referencing systems) would be needed to replace or improve upon it, but everything of importance to safety professionals, engineers and managers can be found in this all-encompassing three volume reference instead. - The process safety encyclopedia, trusted worldwide for over 30 years - Now available in print and online, to aid searchability and portability - Over 3,600 print pages cover the full scope of process safety and loss prevention, compiling theory, practice, standards, legislation, case studies and lessons learned in one resource as opposed to multiple sources
Download or read book Petroleum Engineering Handbook written by Larry W. Lake and published by . This book was released on 2006 with total page 782 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Petroleum Engineering Handbook has long been recognized as a valuable, comprehensive reference that offers practical day-to-day applications for students and experienced engineering professionals alike. The Petroleum Engineering Handbook is a series of 7 volumes sold individually or as a complete set. Drilling technology has evolved substantially over the years, from slide rules and hand calculations to advanced computer science and numerical analysis. Volume II: Drilling Engineering, the first drilling content to be included in the Petroleum Engineering Handbook, is intended to provide a snapshot of the drilling state of the art at the beginning of the 21st century.
Download or read book British Reports Translations and Theses written by British Library. Document Supply Centre and published by . This book was released on 1996 with total page 832 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Safety and Health at Work written by and published by . This book was released on 1997 with total page 1050 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Annual Report and Accounts written by Great Britain. Health and Safety Commission and published by . This book was released on 1996 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Whitaker s Books in Print written by and published by . This book was released on 1998 with total page 3116 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Guide to the Installation Verification and Miscellaneous Aspects of Amendments by the Offshore Installations and Wells Design and Construction Etc Regulations 1996 to the Offshore Installations Safety Case Regulations 1992 written by and published by . This book was released on 1996 with total page 15 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the introduction of requirements for the safety critical elements of an offshore installation to be verified as suitable by an independent and competent person. The target audience includes duty holders responsible for the design and construction of offshore installations as well as those responsible for their operation.
Download or read book Introduction to Permanent Plug and Abandonment of Wells written by Mahmoud Khalifeh and published by Springer Nature. This book was released on 2020-01-27 with total page 285 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book offers a timely guide to challenges and current practices to permanently plug and abandon hydrocarbon wells. With a focus on offshore North Sea, it analyzes the process of plug and abandonment of hydrocarbon wells through the establishment of permanent well barriers. It provides the reader with extensive knowledge on the type of barriers, their functioning and verification. It then discusses plug and abandonment methodologies, analyzing different types of permanent plugging materials. Last, it describes some tests for verifying the integrity and functionality of installed permanent barriers. The book offers a comprehensive reference guide to well plugging and abandonment (P&A) and well integrity testing. The book also presents new technologies that have been proposed to be used in plugging and abandoning of wells, which might be game-changing technologies, but they are still in laboratory or testing level. Given its scope, it addresses students and researchers in both academia and industry. It also provides information for engineers who work in petroleum industry and should be familiarized with P&A of hydrocarbon wells to reduce the time of P&A by considering it during well planning and construction.
Download or read book Safety and Health at Work ILO CIS Bulletin written by and published by . This book was released on 1998 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Macondo Well Deepwater Horizon Blowout written by National Research Council and published by National Academies Press. This book was released on 2012-03-02 with total page 213 pages. Available in PDF, EPUB and Kindle. Book excerpt: The blowout of the Macondo well on April 20, 2010, led to enormous consequences for the individuals involved in the drilling operations, and for their families. Eleven workers on the Deepwater Horizon drilling rig lost their lives and 16 others were seriously injured. There were also enormous consequences for the companies involved in the drilling operations, to the Gulf of Mexico environment, and to the economy of the region and beyond. The flow continued for nearly 3 months before the well could be completely killed, during which time, nearly 5 million barrels of oil spilled into the gulf. Macondo Well-Deepwater Horizon Blowout examines the causes of the blowout and provides a series of recommendations, for both the oil and gas industry and government regulators, intended to reduce the likelihood and impact of any future losses of well control during offshore drilling. According to this report, companies involved in offshore drilling should take a "system safety" approach to anticipating and managing possible dangers at every level of operation-from ensuring the integrity of wells to designing blowout preventers that function under all foreseeable conditions-in order to reduce the risk of another accident as catastrophic as the Deepwater Horizon explosion and oil spill. In addition, an enhanced regulatory approach should combine strong industry safety goals with mandatory oversight at critical points during drilling operations. Macondo Well-Deepwater Horizon Blowout discusses ultimate responsibility and accountability for well integrity and safety of offshore equipment, formal system safety education and training of personnel engaged in offshore drilling, and guidelines that should be established so that well designs incorporate protection against the various credible risks associated with the drilling and abandonment process. This book will be of interest to professionals in the oil and gas industry, government decision makers, environmental advocacy groups, and others who seek an understanding of the processes involved in order to ensure safety in undertakings of this nature.
