Download or read book A Guide to Piping Design and Engineering written by Anuj Bhatia and published by . This book was released on 2016-03-12 with total page 822 pages. Available in PDF, EPUB and Kindle. Book excerpt: One of the most important components of the infrastructure is the vast network of pipelines and process piping-literally millions and millions of miles. The term "pipelines" generally refers to the network of pipelines that transport water, sewage, steam, and gaseous and liquid hydrocarbons from sources (e.g., reservoirs, steam plants, oil and gas wells, refineries) to local distribution centers ("transmission pipelines"), and to the network of pipelines that distribute such products to local markets and end users ("distribution" pipelines). The term "process piping" generally refers to the system of pipes that transport process fluids (e.g. industrial gases, fuels, chemicals etc.) around an industrial facility involved in the manufacture of products or in the generation of power. It also is used to describe utility piping systems (e.g., air, steam, water, compressed air, fuels etc.) that are used in, or in support of the industrial process. Also, certain drainage piping--where corrosive or toxic fluids are being transported and severe conditions may be present, or where it is simply outside the scope of plumbing codes--is also sometimes classified as process piping. Some places where process piping is used are obvious, such as chemical and petrochemical plants, petroleum refineries, pharmaceutical manufacturing facilities and pulp & paper plants. However, there are many other not so obvious places where process piping is commonplace, such as semiconductor facilities, automotive and aircraft plants, water treatment operations, waste treatment facilities and many others.This book comprises of 9 course modules, which cover all aspects of piping design in easy to learn format. All topics are introduced to readers with no or limited background on the subject. A multiple choice quiz (total 255 questions) is provided at the end of each module to test the readers' knowledge and enhance learning. The book is very comprehensive and refresher to engineers and designers working in the field of piping in Oil and Gas, Chemical and Industrial plants. It is also very useful to fresh engineers joining industries for improving their knowledge in the field of fluid transportation and pipework.

Download or read book The Planning Guide to Piping Design written by Richard Beale and published by Gulf Professional Publishing. This book was released on 2017-10-22 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Planning Guide to Piping Design, Second Edition, covers the entire process of managing and executing project piping designs, from conceptual to mechanical completion, also explaining what roles and responsibilities are required of the piping lead during the process. The book explains proven piping design methods in step-by-step processes that cover the increasing use of new technologies and software. Extended coverage is provided for the piping lead to manage piping design activities, which include supervising, planning, scheduling, evaluating manpower, monitoring progress and communicating the piping design. With newly revised chapters and the addition of a chapter on CAD software, the book provides the mentorship for piping leads, engineers and designers to grasp the requirements of piping supervision in the modern age. - Provides essential standards, specifications and checklists and their importance in the initial set-up phase of piping project's execution - Explains and provides real-world examples of key procedures that the piping lead can use to monitor progress - Describes project deliverables for both small and complex size projects - Offers newly revised chapters including a new chapter on CAD software

Download or read book The Engineer s Guide to Plant Layout and Piping Design for the Oil and Gas Industries written by Geoff B. Barker and published by Gulf Professional Publishing. This book was released on 2017-11-25 with total page 534 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Engineer's Guide to Plant Layout and Piping Design for the Oil and Gas Industries gives pipeline engineers and plant managers a critical real-world reference to design, manage, and implement safe and effective plants and piping systems for today's operations. This book fills a training void with complete and practical understanding of the requirements and procedures for producing a safe, economical, operable and maintainable process facility. Easy to understand for the novice, this guide includes critical standards, newer designs, practical checklists and rules of thumb. Due to a lack of structured training in academic and technical institutions, engineers and pipe designers today may understand various computer software programs but lack the fundamental understanding and implementation of how to lay out process plants and run piping correctly in the oil and gas industry. Starting with basic terms, codes and basis for selection, the book focuses on each piece of equipment, such as pumps, towers, underground piping, pipe sizes and supports, then goes on to cover piping stress analysis and the daily needed calculations to use on the job. - Delivers a practical guide to pipe supports, structures and hangers available in one go-to source - Includes information on stress analysis basics, quick checks, pipe sizing and pressure drop - Ensures compliance with the latest piping and plant layout codes and complies with worldwide risk management legislation and HSE - Focuses on each piece of equipment, such as pumps, towers, underground piping, pipe sizes and supports - Covers piping stress analysis and the daily needed calculations to use on the job

Download or read book A Quick Guide to Pipeline Engineering written by D Alkazraji and published by Elsevier. This book was released on 2008-03-26 with total page 174 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pipeline engineering requires an understanding of a wide range of topics. Operators must take into account numerous pipeline codes and standards, calculation approaches, and reference materials in order to make accurate and informed decisions.A Quick Guide to Pipeline Engineering provides concise, easy-to-use, and accessible information on onshore and offshore pipeline engineering. Topics covered include: design; construction; testing; operation and maintenance; and decommissioning.Basic principles are discussed and clear guidance on regulations is provided, in a way that will prove useful to both engineers and students. - Provides concise, easy-to-use, and accessible information on onshore and offshore pipeline engineering - Topics covered include design, construction, testing, operation, maintenance and decommissioning - Basic principles are discussed and clear guidance on regulations is provided

Download or read book Piping Handbook written by Mohinder L. Nayyar and published by McGraw Hill Professional. This book was released on 1999-11-04 with total page 2520 pages. Available in PDF, EPUB and Kindle. Book excerpt: Instant answers to your toughest questions on piping components and systems! It's impossible to know all the answers when piping questions are on the table - the field is just too broad. That's why even the most experienced engineers turn to Piping Handbook, edited by Mohinder L. Nayyar, with contribution from top experts in the field. The Handbook's 43 chapters--14 of them new to this edition--and 9 new appendices provide, in one place, everything you need to work with any type of piping, in any type of piping system: design layout selection of materials fabrication and components operation installation maintenance This world-class reference is packed with a comprehensive array of analytical tools, and illustrated with fully-worked-out examples and case histories. Thoroughly updated, this seventh edition features revised and new information on design practices, materials, practical applications and industry codes and standards--plus every calculation you need to do the job.

Download or read book Handbook of Thermoplastic Piping System Design written by Thomas Sixsmith and published by CRC Press. This book was released on 1997-07-15 with total page 701 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offers coverage of design, engineering, chemical resistance, costs, standards, codes and specifications. The text provides a resistance guide that lists over 800 chemicals and nearly 400 trade names cross-referenced to formal chemical names, covering all known chemical resistance data for the most popular thermoplastic piping systems. The book cove

Download or read book Pipe Flow written by Donald C. Rennels and published by John Wiley & Sons. This book was released on 2012-05-22 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pipe Flow provides the information required to design and analyze the piping systems needed to support a broad range of industrial operations, distribution systems, and power plants. Throughout the book, the authors demonstrate how to accurately predict and manage pressure loss while working with a variety of piping systems and piping components. The book draws together and reviews the growing body of experimental and theoretical research, including important loss coefficient data for a wide selection of piping components. Experimental test data and published formulas are examined, integrated and organized into broadly applicable equations. The results are also presented in straightforward tables and diagrams. Sample problems and their solution are provided throughout the book, demonstrating how core concepts are applied in practice. In addition, references and further reading sections enable the readers to explore all the topics in greater depth. With its clear explanations, Pipe Flow is recommended as a textbook for engineering students and as a reference for professional engineers who need to design, operate, and troubleshoot piping systems. The book employs the English gravitational system as well as the International System (or SI).

Download or read book Perfect Knowledge of written by Sanjay Kumar Gupta and published by Createspace Independent Publishing Platform. This book was released on 2015-08-20 with total page 792 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a Practical Guide in Engineering Technique for Mechanical Engineers (Degree/Diploma/AIME) whether a final year student preparing for service interview or working as a junior Engineer in construction field and doing the Piping Engineering job. It is easy to grasp the basic knowledge and the principle of piping Engineering subject through this book. This is devised and planned to be practical help and is made to be most valuable reference book. To make the book really useful at all levels, it has been written in an easy style and in a simple manner, so that a professional can grasp the subject independently by referring this book. Care has been taken to make this book as self-explanatory as possible and within the technical ability of an average professional. The requirements of all engineering professionals and the various difficulties they face while performing their job is fulfilled. The excellence of the book has been appreciated by the readers from all parts of India and abroad after publication the First Edition.

Download or read book Process Piping written by C. Becht and published by American Society of Mechanical Engineers. This book was released on 2004 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides background information, historical perspective, and expert commentary on the ASME B31.3 Code requirements for process piping design and construction. It provides the most complete coverage of the Code that is available today and is packed with additional information useful to those responsible for the design and mechanical integrity of process piping.

Download or read book Bioprocessing Piping and Equipment Design written by William M. (Bill) Huitt and published by John Wiley & Sons. This book was released on 2016-09-23 with total page 610 pages. Available in PDF, EPUB and Kindle. Book excerpt: The only comprehensive and authoritative reference guide to the ASME Bioprocessing Piping and Equipment (BPE) standard This is a companion guide to the ASME Bioprocessing Piping and Equipment (BPE) Standard and explains what lies behind many of the requirements and recommendations within that industry standard. Following an introductory narrative to the Standard's early history, industry related codes and standards are explained; the design and engineering aspects cover construction materials, both metallic and nonmetallic; then components, fabrication, assembly and installation of piping systems are explored. Examination, Inspection and Testing then precede the ASME BPE certification process, concluding with a discussion on system design. The author draws on many years' experience and insights from first-hand involvement in the field of industrial piping design, engineering, construction, and management, which includes the bioprocessing industry. The reader will learn why dimensions and tolerances, process instrumentation, and material selection play such an integral part in the manufacture of components and instrumentation. This easy to understand and navigate guide will assist engineers (design, piping, chemical, etc.) who need to understand the basis for much of the Standard’s content, as do the contractors and inspectors who have to meet and validate compliance with the BPE Standard.

Download or read book Piping and Pipeline Calculations Manual written by Philip Ellenberger and published by Elsevier. This book was released on 2014-01-22 with total page 413 pages. Available in PDF, EPUB and Kindle. Book excerpt: Piping and Pipeline Calculations Manual, Second Edition provides engineers and designers with a quick reference guide to calculations, codes, and standards applicable to piping systems. The book considers in one handy reference the multitude of pipes, flanges, supports, gaskets, bolts, valves, strainers, flexibles, and expansion joints that make up these often complex systems. It uses hundreds of calculations and examples based on the author's 40 years of experiences as both an engineer and instructor. Each example demonstrates how the code and standard has been correctly and incorrectly applied. Aside from advising on the intent of codes and standards, the book provides advice on compliance. Readers will come away with a clear understanding of how piping systems fail and what the code requires the designer, manufacturer, fabricator, supplier, erector, examiner, inspector, and owner to do to prevent such failures. The book enhances participants' understanding and application of the spirit of the code or standard and form a plan for compliance. The book covers American Water Works Association standards where they are applicable. - Updates to major codes and standards such as ASME B31.1 and B31.12 - New methods for calculating stress intensification factor (SIF) and seismic activities - Risk-based analysis based on API 579, and B31-G - Covers the Pipeline Safety Act and the creation of PhMSA

Download or read book The Piping Guide written by David R. Sherwood and published by . This book was released on 2019-07-12 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: From development of the initial requirements to final drawings used in construction, this authoritative reference for the design and drafting of industrial piping systems provides a step-by-step guide to piping design. Created as an in-depth resource for professionals, this piping bible is as valuable in the field as it is in the office or the classroom. Among the topics covered in this encyclopedic survey are techniques of piping design, the assembly of piping from components, processes for connecting piping to equipment, office organization, methods to translate concepts into finished designs, and terms and abbreviations concerned. An expansive selection of charts and tables presents a wide array of information--frequently used data; factors for establishing pipeways width; spacing between pipes with and without flanges and for "jumpovers" and "runarounds;" principal dimensions and weights for key components; conversion for customary and metric units; direct-reading metric conversion tables for dimensions and data; and a metric supplement with principal dimensional data in millimeters--handily organized for quick reference.

Download or read book Piping and Pipe Support Systems written by Paul Richard Smith and published by McGraw-Hill Companies. This book was released on 1987-01 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: Originating as a set of lecture notes for a piping design & analysis workshop, this comprehensive, state-of-the-art reference is the only guide of its kind in print today providing broad coverage of pipe stress & supports engineering. Full of practical 'how-to' information, the book is detailed enough for the seasoned professional, yet easy enough for the novice to understand. In it, the design criteria, codes, standards, & regulations are explained for power piping, fuel gas piping, chemical plant & refining piping, liquid petroleum transportation piping systems, refrigeration piping, gas transmission & distribution piping, building service piping, & nuclear power piping. Clear, thorough, & up-to-date, this text is required reading for all professionals & students in this rapidly changing field.

Download or read book Piping Engineering Leadership for Process Plant Projects written by James Pennock and published by Elsevier. This book was released on 2001-07-02 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: James O. Pennock has compiled 45 years of personal experience into this how-to guide. Focusing on the position of "lead in charge," this book is an indispensable resource for anyone, new or seasoned veteran, whose job it is to lead the piping engineering and design of a project. The "lead" person is responsible for the successful execution of all piping engineering and design for a project, technical and non-technical aspects alike. The author defines the roles and responsibilities a lead will face and the differences found in various project types. - Incorporates four decades of personal experience in a How-To guide - Focuses on the position of "lead in charge" - Includes coverage of topics often ignored in other books yet essential for success: management, administrative, and control responsibilities

Download or read book Piping Systems Manual written by Brian Silowash and published by McGraw Hill Professional. This book was released on 2009-10-05 with total page 433 pages. Available in PDF, EPUB and Kindle. Book excerpt: In-depth Details on Piping Systems Filled with examples drawn from years of design and field experience, this practical guide offers comprehensive information on piping installation, repair, and rehabilitation. All of the latest codes, standards, and specifications are included. Piping Systems Manual is a hands-on design and engineering resource that explains the reasons behind the designs. You will get full coverage of materials, components, calculations, specifications, safety, and much more. Hundreds of detailed illustrations make it easy to understand the best practices presented in the book. Piping Systems Manual covers: ASME B31 piping codes Specifications and standards Materials of construction Fittings Valves and appurtenances Pipe supports Drafting practice Pressure drop calculations Piping project anatomy Field work and start-up What goes wrong Special services Infrastructure Strategies for remote locations

Download or read book Design of Piping Systems written by M W Kellogg Company and published by . This book was released on 2021-02-20 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: This title made available for the first time an adequately organized, comprehensive analytical method for evaluating the stresses, reactions and deflections in an irregular piping system in space, unlimited as to the character, location or number of concentrated loadings or restraints. Profusely illustrated and meticulously detailed. This title made available for the first time an adequately organized, comprehensive analytical method for evaluating the stresses, reactions and deflections in an irregular piping system in space, unlimited as to the character, location or number of concentrated loadings or restraints. Profusely illustrated and meticulously detailed.

Download or read book Facility Piping Systems Handbook written by Michael L. Frankel and published by McGraw Hill Professional. This book was released on 2009-09-02 with total page 1040 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Comprehensive Guide to Facility Piping Systems Fully up-to-date with the latest codes and standards, this practical resource contains everything you need to plan, select, design, specify, and test piping systems for industry, commercial, and institutional applications. The book includes complete coverage of pipes, fittings, valves, jointing methods, hangers, supports, pumps, tanks, and other required equipment. Facility Piping Systems Handbook, Third Edition, progresses from fundamentals of systems operation to a design procedure that allows quick and accurate component and pipe sizing. Listings of FDA, EPA, and OSHA requirements are included. Complete with formulas, charts, and tables, this invaluable all-in-one volume will save you time and money on the job. Coverage includes: Water treatment and purification Heat transfer, insulation, and freeze protection Cryogenic storage Facility steam and condensate systems Liquid fuel storage and dispensing Fuel gas and compressed gas systems Vacuum air systems Animal facility piping systems Life safety systems Nonpotable and drinking water systems Swimming pools, spas, and water attractions And more