Download or read book A Practical Guide to Design for Additive Manufacturing written by Olaf Diegel and published by Springer. This book was released on 2019-05-21 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a wealth of practical guidance on how to design parts to gain the maximum benefit from what additive manufacturing (AM) can offer. It begins by describing the main AM technologies and their respective advantages and disadvantages. It then examines strategic considerations in the context of designing for additive manufacturing (DfAM), such as designing to avoid anisotropy, designing to minimize print time, and post-processing, before discussing the economics of AM. The following chapters dive deeper into computational tools for design analysis and the optimization of AM parts, part consolidation, and tooling applications. They are followed by an in-depth chapter on designing for polymer AM and applicable design guidelines, and a chapter on designing for metal AM and its corresponding design guidelines. These chapters also address health and safety, certification and quality aspects. A dedicated chapter covers the multiple post-processing methods for AM, offering the reader practical guidance on how to get their parts from the AM machine into a shape that is ready to use. The book’s final chapter outlines future applications of AM. The main benefit of the book is its highly practical approach: it provides directly applicable, “hands-on” information and insights to help readers adopt AM in their industry
Download or read book Design for Additive Manufacturing written by Martin Leary and published by Elsevier. This book was released on 2019-12-03 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design for Additive Manufacturing is a complete guide to design tools for the manufacturing requirements of AM and how they can enable the optimization of process and product parameters for the reduction of manufacturing costs and effort. This timely synopsis of state-of-the-art design tools for AM brings the reader right up-to-date on the latest methods from both academia and industry. Tools for both metallic and polymeric AM technologies are presented and critically reviewed, along with their manufacturing attributes. Commercial applications of AM are also explained with case studies from a range of industries, thus demonstrating best-practice in AM design. Covers all the commonly used tools for designing for additive manufacturing, as well as descriptions of important emerging technologies Provides systematic methods for optimizing AM process selection for specific production requirement Addresses design tools for both metallic and polymeric AM technologies Includes commercially relevant case studies that showcase best-practice in AM design, including the biomedical, aerospace, defense and automotive sectors
Download or read book A Guide to Additive Manufacturing written by Damir Godec and published by Springer Nature. This book was released on 2022-09-12 with total page 347 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book gives both a theoretical and practical overview of several important aspects of additive manufacturing (AM). It is written in an educative style to enable the reader to understand and apply the material. It begins with an introduction to AM technologies and the general workflow, as well as an overview of the current standards within AM. In the following chapter, a more in-depth description is given of design optimization and simulation for AM in polymers and metals, including practical guidelines for topology optimization and the use of lattice structures. Special attention is also given to the economics of AM and when the technology offers a benefit compared to conventional manufacturing processes. This is followed by a chapter with practical insights into how AM materials and processing parameters are developed for both material extrusion and powder bed fusion. The final chapter describes functionally graded AM in various materials and technologies. Throughout the book, a large number of industrial applications are described to exemplify the benefits of AM.
Download or read book Additive Manufacturing Handbook written by Adedeji B. Badiru and published by CRC Press. This book was released on 2017-05-19 with total page 928 pages. Available in PDF, EPUB and Kindle. Book excerpt: Theoretical and practical interests in additive manufacturing (3D printing) are growing rapidly. Engineers and engineering companies now use 3D printing to make prototypes of products before going for full production. In an educational setting faculty, researchers, and students leverage 3D printing to enhance project-related products. Additive Manufacturing Handbook focuses on product design for the defense industry, which affects virtually every other industry. Thus, the handbook provides a wide range of benefits to all segments of business, industry, and government. Manufacturing has undergone a major advancement and technology shift in recent years.
Download or read book Additive Manufacturing written by Juan Pou and published by Elsevier. This book was released on 2021-05-21 with total page 768 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive Manufacturing explains the background theory, working principles, technical specifications, and latest developments in a wide range of additive manufacturing techniques. Topics addressed include treatments of manufactured parts, surface characterization, and the effects of surface treatments on mechanical behavior. Many different perspectives are covered, including design aspects, technologies, materials and sustainability. Experts in both academia and industry contribute to this comprehensive guide, combining theoretical developments with practical improvements from R&D. This unique guide allows readers to compare the characteristics of different processes, understand how they work, and provide parameters for their effective implementation. This book is part of a four-volume set entitled Handbooks in Advanced Manufacturing. Other titles in the set include Advanced Machining and Finishing, Advanced Welding and Deformation, and Sustainable Manufacturing Processes. Provides theory, operational parameters, and latest developments in 20 different additive manufacturing processes Includes contributions from experts in industry and academia with a wide range of disciplinary backgrounds, providing a comprehensive survey of this diverse and influential subject Includes case studies of innovative additive manufacturing practices from industry
Download or read book Fundamentals of Additive Manufacturing for the Practitioner written by Sheku Kamara and published by John Wiley & Sons. This book was released on 2021-04-21 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Additive Manufacturing for the Practitioner Discover how to shift from traditional to additive manufacturing processes with this core resource from industry leaders Fundamentals of Additive Manufacturing for the Practitioner delivers a vital examination of the methods and techniques needed to transition from traditional to additive manufacturing. The book explains how traditional manufacturing work roles change as various industries move into additive manufacturing and describes the flow of the typical production process in additive manufacturing. Detailed explorations of the processes, inputs, machine and build preparation, post-processing, and best practices are included, as well as real-world examples of the principles discussed within. Every chapter includes a problems and opportunities section that prompts readers to apply the book’s techniques to their own work. Diagrams and tables are distributed liberally throughout the work to present concepts visually, and key options and decisions are highlighted to assist the reader in understanding how additive manufacturing changes traditional workflows. Readers will also benefit from the inclusion of A thorough introduction on how to move into additive manufacturing, including the identification of a manufacturing opportunity and its characteristics An exploration of how to determine if additive manufacturing is the right solution, with descriptions of the origins of additive manufacturing and the current state of the technology An examination of the materials used in additive manufacturing, including polymers, composites, metals, plasters, and biomaterials A discussion of choosing an additive manufacturing technology and process Perfect for mechanical engineers, manufacturing professionals, technicians, and designers new to additive manufacturing, Fundamentals of Additive Manufacturing for the Practitioner will also earn a place in the libraries of technical, vocational, and continuing education audiences seeking to improve their skills with additive manufacturing workflows.
Download or read book Additive Manufacturing Technologies written by Ian Gibson and published by Springer Nature. This book was released on 2020-11-10 with total page 685 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook covers in detail digitally-driven methods for adding materials together to form parts. A conceptual overview of additive manufacturing is given, beginning with the fundamentals so that readers can get up to speed quickly. Well-established and emerging applications such as rapid prototyping, micro-scale manufacturing, medical applications, aerospace manufacturing, rapid tooling and direct digital manufacturing are also discussed. This book provides a comprehensive overview of additive manufacturing technologies as well as relevant supporting technologies such as software systems, vacuum casting, investment casting, plating, infiltration and other systems. Reflects recent developments and trends and adheres to the ASTM, SI and other standards; Includes chapters on topics that span the entire AM value chain, including process selection, software, post-processing, industrial drivers for AM, and more; Provides a broad range of technical questions to ensure comprehensive understanding of the concepts covered.
Download or read book The Management of Additive Manufacturing written by Mojtaba Khorram Niaki and published by Springer. This book was released on 2017-12-26 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces readers to additive technology and its application in different business sectors. It explores the fundamental impact additive has on technology, particularly on operations, innovation, supply chains, the environment and customer relations. Subsequently, on the basis of a broad survey of the best technology adopters, it offers advice on how to enhance business value by implementing the technology in different industrial and commercial environments. Additive manufacturing (AM) is a new area of manufacturing that has already brought about phenomenal changes to industry and business models. It affects nearly all aspects of the managerial and organizational thinking that was applied to conventional manufacturing. Currently, the technology is being adopted in manufacturing areas that involve high-value products with complex geometries, and small to medium production volumes. It boosts the productivity of new product development processes by slashing costs, reducing time and promoting creativity and innovativeness. Further, it shrinks supply chains by bringing firms closer to their customers. This unique book offers abundant empirical and practical evidence confirming the value of this new technology.
Download or read book Metal Additive Manufacturing written by Dyuti Sarker and published by John Wiley & Sons. This book was released on 2021-10-26 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: METAL ADDITIVE MANUFACTURING A comprehensive review of additive manufacturing processes for metallic structures Additive Manufacturing (AM)—also commonly referred to as 3D printing—builds three-dimensional objects by adding materials layer by layer. Recent years have seen unprecedented investment in additive manufacturing research and development by governments and corporations worldwide. This technology has the potential to replace many conventional manufacturing processes, enable the development of new industry practices, and transform the entire manufacturing enterprise. Metal Additive Manufacturing provides an up-to-date review of all essential physics of metal additive manufacturing techniques with emphasis on both laser-based and non-laser-based additive manufacturing processes. This comprehensive volume covers fundamental processes and equipment, governing physics and modelling, design and topology optimization, and more. The text adresses introductory, intermediate, and advanced topics ranging from basic additive manufacturing process classification to practical and material design aspects of additive manufacturability. Written by a panel of expert authors in the field, this authoritative resource: Provides a thorough analysis of AM processes and their theoretical foundations Explains the classification, advantages, and applications of AM processes Describes the equipment required for different AM processes for metallic structures, including laser technologies, positioning devices, feeder and spreader mechanisms, and CAD software Discusses the opportunities, challenges, and current and emerging trends within the field Covers practical considerations, including design for AM, safety, quality assurance, automation, and real-time control of AM processes Includes illustrative cases studies and numerous figures and tables Featuring material drawn from the lead author’s research and professional experience on laser additive manufacturing, Metal Additive Manufacturing is an important source for manufacturing professionals, research and development engineers in the additive industry, and students and researchers involved in mechanical, mechatronics, automatic control, and materials engineering and science.
Download or read book Additive Manufacturing of Metals written by John O. Milewski and published by Springer. This book was released on 2017-06-28 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: This engaging volume presents the exciting new technology of additive manufacturing (AM) of metal objects for a broad audience of academic and industry researchers, manufacturing professionals, undergraduate and graduate students, hobbyists, and artists. Innovative applications ranging from rocket nozzles to custom jewelry to medical implants illustrate a new world of freedom in design and fabrication, creating objects otherwise not possible by conventional means. The author describes the various methods and advanced metals used to create high value components, enabling readers to choose which process is best for them. Of particular interest is how harnessing the power of lasers, electron beams, and electric arcs, as directed by advanced computer models, robots, and 3D printing systems, can create otherwise unattainable objects. A timeline depicting the evolution of metalworking, accelerated by the computer and information age, ties AM metal technology to the rapid evolution of global technology trends. Charts, diagrams, and illustrations complement the text to describe the diverse set of technologies brought together in the AM processing of metal. Extensive listing of terms, definitions, and acronyms provides the reader with a quick reference guide to the language of AM metal processing. The book directs the reader to a wealth of internet sites providing further reading and resources, such as vendors and service providers, to jump start those interested in taking the first steps to establishing AM metal capability on whatever scale. The appendix provides hands-on example exercises for those ready to engage in experiential self-directed learning.
Download or read book Additive Manufacturing of Metals The Technology Materials Design and Production written by Li Yang and published by Springer. This book was released on 2017-05-11 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a unique guide to the three-dimensional (3D) printing of metals. It covers various aspects of additive, subtractive, and joining processes used to form three-dimensional parts with applications ranging from prototyping to production. Examining a variety of manufacturing technologies and their ability to produce both prototypes and functional production-quality parts, the individual chapters address metal components and discuss some of the important research challenges associated with the use of these technologies. As well as exploring the latest technologies currently under development, the book features unique sections on electron beam melting technology, material lifting, and the importance this science has in the engineering context. Presenting unique real-life case studies from industry, this book is also the first to offer the perspective of engineers who work in the field of aerospace and transportation systems, and who design components and manufacturing networks. Written by the leading experts in this field at universities and in industry, it provides a comprehensive textbook for students and an invaluable guide for practitioners
Download or read book Science Technology and Applications of Metals in Additive Manufacturing written by Bhaskar Dutta and published by Elsevier. This book was released on 2019-08-15 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: Science, Technology and Applications of Metal Additive Manufacturing provides a holistic picture of metal Additive Manufacturing (AM) that encompasses the science, technology and applications for the use of metal AM. Users will find design aspects, various metal AM technologies commercially available, a focus on merits and demerits, implications for qualification and certification, applications, cost modeling of AM, and future directions. This book serves as an educational guide, providing a holistic picture of metal AM that encompasses science, technology and applications for the real-life use of metal AM. Includes an overall understanding of metal additive manufacturing, Including steps involved (process flow) Discusses available commercial metal AM technologies and their relative strengths and weaknesses Reviews the process of qualification of AM parts, various applications, cost modeling, and the future directions of metal AM
Download or read book 3D Printing written by Andreas Gebhardt and published by . This book was released on 2019 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Additive Manufacturing written by M. Manjaiah and published by Woodhead Publishing. This book was released on 2021-07-17 with total page 325 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive Manufacturing: A Tool for Industrial Revolution 4.0 explores the latest developments, underlying mechanisms, challenges and opportunities for 3D printing in a digital manufacturing environment. It uses an international panel of experts to explain how additive manufacturing processes have been successfully integrated with industry 4.0 technologies for increased technical capabilities, efficiency, flexibility and sustainability. The full manufacturing product cycle is addressed, including design, materials, mechanical properties, and measurement. Future directions for this important technological intersection are also explored. This book will interest researchers and industrial professionals in industrial engineering, digital manufacturing, advanced manufacturing, data science applications, and computer engineering. Addresses a wide range of additive manufacturing technology, including processes, controls and operation Explains many new and sustainable additive manufacturing methods Provides detailed descriptions on how to modernize and optimize conventional additive manufacturing methodologies in order to take full advantage of synergies with industry 4.0
Download or read book Theory and Practice of Additive Manufacturing written by Tuhin Mukherjee and published by John Wiley & Sons. This book was released on 2023-09-26 with total page 453 pages. Available in PDF, EPUB and Kindle. Book excerpt: Theory and Practice of Additive Manufacturing Discover the ins and outs of additive manufacturing in this student-friendly textbook Also known as 3D printing, additive manufacturing is a process by which layers of material are added to create three-dimensional objects guided by a digital model. It has revolutionized the design and manufacture of customized products, facilitating the rapid, flexible production of a huge range of goods. It promises to revolutionize manufacturing engineering, shorten industrial supply chains, and more. Theory and Practice of Additive Manufacturing provides the first introduction to this subject designed specifically for students. Balancing the underlying theories behind additive manufacturing with concrete applications, it guides readers through basic processes, essential tools and materials, and more. The result is ideal for readers looking to bring additive manufacturing to bear on engineering or industry careers of almost any kind. Theory and Practice of Additive Manufacturing features: Over 100 worked-out example problems Detailed discussion of the emerging digital tools including mechanistic modeling, machine learning, and more Commitment to pedagogy and reinforcement geared toward student learning outcomes Theory and Practice of Additive Manufacturing is ideal for undergraduate and graduate students and instructors in introductory additive manufacturing courses, as well as practicing engineers and researchers working in industries that use additive manufacturing technologies, including aerospace, automotive, and consumer goods.
Download or read book Additive Manufacturing 2024 Edition written by Andrew Entwistle Bsc (Hons) Miet Mbcs and published by Independently Published. This book was released on 2023-12-20 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Updated for the latest innovations of 2024, this comprehensive guide to Additive Manufacturing & 3D Printing tools, and techniques provides an up to the minute view of how the technology and the applications it is used for is constantly developing.
Download or read book Understanding Additive Manufacturing written by Andreas Gebhardt and published by . This book was released on 2012 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt: