Download or read book A Gradient Crystal Plasticity Theory Based on an Extended Energy Balance written by Prahs, Andreas and published by KIT Scientific Publishing. This book was released on 2020-09-15 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt: An overview of different methods for the derivation of extended continuum models is given. A gradient plasticity theory is established in the context of small deformations and single slip by considering the invariance of an extended energy balance with respect to Euclidean transformations, where the plastic slip is considered as an additional degree of freedom. Thermodynamically consistent flow rules at the grain boundary are derived. The theory is applied to a two- and a three-phase laminate.

Download or read book Crystal Plasticity Finite Element Methods written by Franz Roters and published by John Wiley & Sons. This book was released on 2011-08-04 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by the leading experts in computational materials science, this handy reference concisely reviews the most important aspects of plasticity modeling: constitutive laws, phase transformations, texture methods, continuum approaches and damage mechanisms. As a result, it provides the knowledge needed to avoid failures in critical systems udner mechanical load. With its various application examples to micro- and macrostructure mechanics, this is an invaluable resource for mechanical engineers as well as for researchers wanting to improve on this method and extend its outreach.

Download or read book Modeling of Dislocation Grain Boundary Interactions in Gradient Crystal Plasticity Theories written by Erdle, Hannes and published by KIT Scientific Publishing. This book was released on 2022-07-12 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: A physically-based dislocation theory of plasticity is derived within an extended continuum mechanical context. Thermodynamically consistent flow rules at the grain boundaries are derived. With an analytical solution of a three-phase periodic laminate, dislocation pile-up at grain boundaries and dislocation transmission through the grain boundaries are investigated. For the finite element implementations, numerically efficient approaches are introduced based on accumulated field variables.

Download or read book Microstructure modeling and crystal plasticity parameter identification for predicting the cyclic mechanical behavior of polycrystalline metals written by Kuhn, Jannick and published by KIT Scientific Publishing. This book was released on 2023-04-04 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computational homogenization permits to capture the influence of the microstructure on the cyclic mechanical behavior of polycrystalline metals. In this work we investigate methods to compute Laguerre tessellations as computational cells of polycrystalline microstructures, propose a new method to assign crystallographic orientations to the Laguerre cells and use Bayesian optimization to find suitable parameters for the underlying micromechanical model from macroscopic experiments.

Download or read book Generalized Continua and Dislocation Theory written by Carlo Sansour and published by Springer Science & Business Media. This book was released on 2012-05-27 with total page 323 pages. Available in PDF, EPUB and Kindle. Book excerpt: Defects, dislocations and the general theory.- Approaches to generalized continua.- Generalized continuum modelling of crystal plasticity.- Introduction to discrete dislocation dynamics. The book contains four lectures on generalized continua and dislocation theory, reflecting the treatment of the subject at different scales. G. Maugin provides a continuum formulation of defects at the heart of which lies the notion of the material configuration and the material driving forces of in-homogeneities such as dislocations, disclinations, point defects, cracks, phase-transition fronts and shock waves. C. Sansour and S. Skatulla start with a compact treatment of linear transformation groups with subsequent excursion into the continuum theory of generalized continua. After a critical assessment a unified framework of the same is presented. The next contribution by S. Forest gives an account on generalized crystal plasticity. Finally, H. Zbib provides an account of dislocation dynamics and illustrates its fundamental importance at the smallest scale. In three contributions extensive computational results of many examples are presented.

Download or read book Deep material networks for efficient scale bridging in thermomechanical simulations of solids written by Gajek, Sebastian and published by KIT Scientific Publishing. This book was released on 2023-08-25 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: We investigate deep material networks (DMN). We lay the mathematical foundation of DMNs and present a novel DMN formulation, which is characterized by a reduced number of degrees of freedom. We present a efficient solution technique for nonlinear DMNs to accelerate complex two-scale simulations with minimal computational effort. A new interpolation technique is presented enabling the consideration of fluctuating microstructure characteristics in macroscopic simulations.

Download or read book Single crystal Gradient Plasticity with an Accumulated Plastic Slip Theory and Applications written by Eric Bayerschen and published by KIT Scientific Publishing. This book was released on 2016 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: In experiments on metallic microwires, size effects occur as a result of the interaction of dislocations with, e.g., grain boundaries. In continuum theories this behavior can be approximated using gradient plasticity. A numerically efficient geometrically linear gradient plasticity theory is developed considering the grain boundaries and implemented with finite elements. Simulations are performed for several metals in comparison to experiments and discrete dislocation dynamics simulations.

Download or read book A computational multi scale approach for brittle materials written by Ernesti, Felix and published by KIT Scientific Publishing. This book was released on 2023-04-17 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials of industrial interest often show a complex microstructure which directly influences their macroscopic material behavior. For simulations on the component scale, multi-scale methods may exploit this microstructural information. This work is devoted to a multi-scale approach for brittle materials. Based on a homogenization result for free discontinuity problems, we present FFT-based methods to compute the effective crack energy of heterogeneous materials with complex microstructures.

Download or read book Efficient fast Fourier transform based solvers for computing the thermomechanical behavior of applied materials written by Wicht, Daniel and published by KIT Scientific Publishing. This book was released on 2022-10-11 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: The mechanical behavior of many applied materials arises from their microstructure. Thus, to aid the design, development and industrialization of new materials, robust computational homogenization methods are indispensable. The present thesis is devoted to investigating and developing FFT-based micromechanics solvers for efficiently computing the (thermo)mechanical response of nonlinear composite materials with complex microstructures.

Download or read book IUTAM Symposium on Progress in the Theory and Numerics of Configurational Mechanics written by Paul Steinmann and published by Springer Science & Business Media. This book was released on 2009-08-03 with total page 271 pages. Available in PDF, EPUB and Kindle. Book excerpt: Con?gurational mechanics has attracted quite a bit of attention from various - search ?elds over the recent years/decades. Having been regarded in its infancy of the early years as a somewhat obscureand almost mystic ?eld of researchthat could only be understood by a happy few of insiders with a pronounced theoretical inc- nation, con?gurational mechanics has developed by now into a versatile tool that can be applied to a variety of problems. Since the seminal works of Eshelby a general notion of con?gurational - chanics has been developed and has successfully been applied to many pr- lems involving various types of defects in continuous media. The most pro- nent application is certainly the use of con?gurational forces in fracture - chanics. However, as con?gurational mechanics is related to arbitrary mat- ial inhomogeneities it has also very successfully been applied to many ma- rials science and engineering problems such as phase transitions and inelastic deformations. Also the modeling of materials with micro-structure evolution is an important ?eld, in which con?gurational mechanics can provide a better understanding of processes going on within the material. Besides these mechanically, physically, and chemically motivated applications, ideas from con?gurational mechanics are now increasingly applied within computational mechanics.

Download or read book Thermomechanical Modeling and Experimental Characterization of Sheet Molding Compound Composites written by Lang, Juliane and published by KIT Scientific Publishing. This book was released on 2023-06-28 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this work is to model and experimentally characterize the anisotropic material behavior of SMC composites on the macroscale with consideration of the microstructure. Temperature-dependent thermoelastic behavior and failure behavior are modeled and the corresponding material properties are determined experimentally. Additionally, experimental biaxial damage investigations are performed. A parameter identification merges modeling and experiments and validates the models.

Download or read book Modeling martensitic phase transformation in dual phase steels based on a sharp interface theory written by Ruck, Johannes and published by KIT Scientific Publishing. This book was released on 2021-05-07 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: artensite forms under rapid cooling of austenitic grains accompanied by a change of the crystal lattice. Large deformations are induced which lead to plastic dislocations. In this work a transformation model based on the sharp interface theory, set in a finite strain context is developed. Crystal plasticity effects, the kinetic of the singular surface as well as a simple model of the inheritance from austenite dislocations into martensite are accounted for.

Download or read book Dislocation Mechanism Based Crystal Plasticity written by Zhuo Zhuang and published by Academic Press. This book was released on 2019-04-12 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dislocation Based Crystal Plasticity: Theory and Computation at Micron and Submicron Scale provides a comprehensive introduction to the continuum and discreteness dislocation mechanism-based theories and computational methods of crystal plasticity at the micron and submicron scale. Sections cover the fundamental concept of conventional crystal plasticity theory at the macro-scale without size effect, strain gradient crystal plasticity theory based on Taylar law dislocation, mechanism at the mesoscale, phase-field theory of crystal plasticity, computation at the submicron scale, including single crystal plasticity theory, and the discrete-continuous model of crystal plasticity with three-dimensional discrete dislocation dynamics coupling finite element method (DDD-FEM). Three kinds of plastic deformation mechanisms for submicron pillars are systematically presented. Further sections discuss dislocation nucleation and starvation at high strain rate and temperature effect for dislocation annihilation mechanism. - Covers dislocation mechanism-based crystal plasticity theory and computation at the micron and submicron scale - Presents crystal plasticity theory without size effect - Deals with the 3D discrete-continuous (3D DCM) theoretic and computational model of crystal plasticity with 3D discrete dislocation dynamics (3D DDD) coupling finite element method (FEM) - Includes discrete dislocation mechanism-based theory and computation at the submicron scale with single arm source, coating micropillar, lower cyclic loading pillars, and dislocation starvation at the submicron scale

Download or read book Microstructure generation and micromechanical modeling of sheet molding compound composites written by Görthofer, Johannes and published by KIT Scientific Publishing. This book was released on 2022-09-13 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wir präsentieren einen Algorithmus zur schnellen Erzeugung von SMC Mikrostrukturen hoher Güte, durch Verwendung einer exakten Schließung und eines quasi-zufälligen Samplings. Darüber hinaus stellen wir ein modulares Framework zur Modellierung anisotroper Schädigung vor. Unser Konzept der Extraktionstensoren und Schädigungsfunktionen ermöglicht die Beschreibung komplexer Vorgänge. Darüber hinaus schlagen wir einen ganzheitlichen Multiskalenansatz zur Bestimmung anisotroper Versagenskriterien vor. - We introduce an algorithm that allows for a fast generation of SMC composite microstructures. An exact closure approximation and a quasi-random orientation sampling ensure high fidelity. Furthermore, we present a modular framework for anisotropic damage evolution. Our concept of extraction tensors and damage-hardening functions enables the description of complex damage-degradation. In addition, we propose a holistic multiscale approach for constructing anisotropic failure criteria.

Download or read book Fiber Orientation Tensors and Mean Field Homogenization Application to Sheet Molding Compound written by Bauer, Julian Karl and published by KIT Scientific Publishing. This book was released on 2023-02-27 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: Effective mechanical properties of fiber-reinforced composites strongly depend on the microstructure, including the fibers' orientation. Studying this dependency, we identify the variety of fiber orientation tensors up to fourth-order using irreducible tensors and material symmetry. The case of planar fiber orientation tensors, relevant for sheet molding compound, is presented completely. Consequences for the reconstruction of fiber distributions and mean field homogenization are presented.

Download or read book Numerically Efficient Gradient Crystal Plasticity with a Grain Boundary Yield Criterion and Dislocation based Work Hardening written by Wulfinghoff, Stephan and published by KIT Scientific Publishing. This book was released on 2014-12-10 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a contribution to the further development of gradient plasticity. Several open questions are addressed, where the efficient numerical implementation is particularly focused on. Thebook inspects an equivalent plastic strain gradient plasticity theory and a grain boundary yield model. Experiments can successfully be reproduced. The hardening model is based on dislocation densities evolving according to partial differential equations taking into account dislocation transport.

Download or read book Continuum Scale Simulation of Engineering Materials written by Dierk Raabe and published by John Wiley & Sons. This book was released on 2006-03-06 with total page 885 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book fills a gap by presenting our current knowledge and understanding of continuum-based concepts behind computational methods used for microstructure and process simulation of engineering materials above the atomic scale. The volume provides an excellent overview on the different methods, comparing the different methods in terms of their respective particular weaknesses and advantages. This trains readers to identify appropriate approaches to the new challenges that emerge every day in this exciting domain. Divided into three main parts, the first is a basic overview covering fundamental key methods in the field of continuum scale materials simulation. The second one then goes on to look at applications of these methods to the prediction of microstructures, dealing with explicit simulation examples, while the third part discusses example applications in the field of process simulation. By presenting a spectrum of different computational approaches to materials, the book aims to initiate the development of corresponding virtual laboratories in the industry in which these methods are exploited. As such, it addresses graduates and undergraduates, lecturers, materials scientists and engineers, physicists, biologists, chemists, mathematicians, and mechanical engineers.