Download or read book Rheology and Processing of Polymeric Materials written by Chang Dae Han and published by Oxford University Press. This book was released on 2007-05-16 with total page 728 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume 1 presents first fundamental principles of the rheology of polymeric fluid including kinematics and stresses of a deformable body, the continuum theory for the viscoelasticity of flexible homogeneous polymeric liquids, the molecular theory for the viscoelasticity of flexible homogeneous polymeric liquids, and the experimental methods for the measurement of the rheological properties of poylmeric liquids. The materials presented are intended to set a stage for the subsequent chapters by introducing the basic concepts and principles of rheology, from both phenomenological and molecular perspectives, ofstructurally simple flexible and homogeneous polymeric liquids. Next, this volume presents the rheological behavior of structurally complex polymeric materials including miscible polymer blends, block copolymers, liquid-crystalline polymers, thermoplastic polyurethanes, immiscible polymer blends, perticulare-filled polymers, organoclay nanocomposites, molten polymers with dissolved gas, and thermosts.
Download or read book Mesoscale simulation of the mold filling process of Sheet Molding Compound written by Meyer, Nils and published by KIT Scientific Publishing. This book was released on 2022-07-12 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sheet Molding Compounds (SMC) are discontinuous fiber reinforced composites that are widely applied due to their ability to realize composite parts with long fibers at low cost. A novel Direct Bundle Simulation (DBS) method is proposed in this work to enable a direct simulation at component scale utilizing the observation that fiber bundles often remain in a bundled configuration during SMC compression molding.
Download or read book International Polymer Processing written by and published by . This book was released on 1986 with total page 738 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Rheological Fundamentals of Polymer Processing written by J.A. Covas and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: Experts in rheology and polymer processing present up-to-date, fundamental and applied information on the rheological properties of polymers, in particular those relevant to processing, contributing to the physical understanding and the mathematical modelling of polymer processing sequences. Basic concepts of non-Newtonian fluid mechanics, micro-rheological modelling and constitutive modelling are reviewed, and rheological measurements are described. Topics with practical relevance are debated, such as linear viscoelasticity, converging and diverging flows, and the rheology of multiphase systems. Approximation methods are discussed for the computer modelling of polymer melt flow. Subsequently, polymer processing technologies are studied from both simulation and engineering perspectives. Mixing, crystallization and reactive processing aspects are also included. Audience: An integrated and complete view of polymer processing and rheology, important to institutions and individuals engaged in the characterisation, testing, compounding, modification and processing of polymeric materials. Can also support academic polymer processing engineering programs.
Download or read book Manufacturing Techniques for Polymer Matrix Composites PMCs written by Suresh G Advani and published by Elsevier. This book was released on 2012-07-18 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymer matrix composites are used extensively across a wide range of industries, making the design and development of effective manufacturing processes of great importance. Manufacturing techniques for polymer matrix composites (PMCs) provides an authoritative review of the different technologies employed in the manufacture of this class of composite.Following an introduction to composites and manufacturing processes, part one reviews the manufacturing of short fiber and nanoparticle based polymer matrix composites, with injection and compression molding examined in depth. Thermoplastic processing is the focus of part two. Sheet forming, fabric thermostamping, filament winding and continuous fiber reinforced profiles are investigated. Part three reviews thermoset processing. A survey of resin transfer molding follows, including vacuum-assisted and compression resin transfer molding. The pultrusion process is then considered, before the book concludes with an investigation into autoclave and out-of-autoclave curing processes in polymer matrix composites.With its distinguished editors and international team of expert contributors, Manufacturing techniques for polymer matrix composites (PMCs) is an essential guide for engineers and scientists working in the field of polymer matrix composites. - Provides an authoritative review of the different technologies employed in the manufacture of polymer matrix composites - Reviews the manufacturing of short fiber and nanoparticle-based polymer matrix composites, with injection and compression molding examined in depth - Examines thermoplastic processing, sheet forming, fabric thermostamping, filament winding and continuous fiber reinforced profiles
Download or read book International Aerospace Abstracts written by and published by . This book was released on 1982 with total page 706 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Polymer Science and Nanotechnology written by Ravin Narain and published by Elsevier. This book was released on 2020-06-16 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymer Science and Nanotechnology: Fundamentals and Applications brings together the latest advances in polymer science and nanoscience. Sections explain the fundamentals of polymer science, including key aspects and methods in terms of molecular structure, synthesis, characterization, microstructure, phase structure and processing and properties before discussing the materials of particular interest and utility for novel applications, such as hydrogels, natural polymers, smart polymers and polymeric biomaterials. The second part of the book examines essential techniques in nanotechnology, with an emphasis on the utilization of advanced polymeric materials in the context of nanoscience. Throughout the book, chapters are prepared so that materials and products can be geared towards specific applications. Two chapters cover, in detail, major application areas, including fuel and solar cells, tissue engineering, drug and gene delivery, membranes, water treatment and oil recovery. - Presents the latest applications of polymers and polymeric nanomaterials, across energy, biomedical, pharmaceutical, and environmental fields - Contains detailed coverage of polymer nanocomposites, polymer nanoparticles, and hybrid polymer-metallic nanoparticles - Supports an interdisciplinary approach, enabling readers from different disciplines to understand polymer science and nanotechnology and the interface between them
Download or read book Journal of Engineering for Industry written by and published by . This book was released on 1984 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Flow Analysis of Injection Molds written by Peter K. Kennedy and published by Hanser Pub Incorporated. This book was released on 2012-09-30 with total page 349 pages. Available in PDF, EPUB and Kindle. Book excerpt: Given the importance of injection molding as a process as well as the simulation industry that supports it, there was a need for a book that deals solely with the modeling and simulation of injection molding. This book meets that need. The modeling and simulation details of filling, packing, residual stress, shrinkage, and warpage of amorphous, semi-crystalline, and fiber-filled materials are described. This book is essential for simulation software users, as well as for graduate students and researchers who are interested in enhancing simulation. And for the specialist, numerous appendices provide detailed information on the topics discussed in the chapters.
Download or read book Heat Transfer in Polymer Composite Materials written by Nicolas Boyard and published by John Wiley & Sons. This book was released on 2016-03-28 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses general information, good practices and examples about thermo-physical properties, thermo-kinetic and thermo-mechanical couplings, instrumentation in thermal science, thermal optimization and infrared radiation.
Download or read book Polypropylene Handbook written by József Karger-Kocsis and published by Springer. This book was released on 2019-03-18 with total page 648 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book extensively reviews Polypropylene (PP), the second most widely produced thermoplastic material, having been produced for over 60 years. Its synthesis, processing and application are still accompanied by vigorous R&D developments because the properties of PP are at the borderline between those of commodity and engineering thermoplastics. Readers are introduced to various tacticities and polymorphs of PP, and their effects on structural properties. Further, the book addresses the control of optical properties using nucleants, provides strategies for overcoming the limited cold/impact resistance of PP, examines in detail the effects of recycling, and presents guidelines for the property modification of PPs through foaming, filling and reinforcing with respect to target applications. Special attention is paid to descriptions and models of properties as a function of morphological variables. Last but not least, the book suggests potential practical applications of PP-based systems, especially in the packaging, appliances, building/construction, textile and automotive sectors. Each chapter, written by internationally respected scientists, reflects the current state-of-art in the respective field and offers a vital source of information for students, researchers and engineers interested in the morphology, properties, testing and modeling of PP and PP-based systems. The content is indispensable to the appropriate application of PPs and related composites.
Download or read book Polymer Rheology written by Lawrence E. Nielsen and published by . This book was released on 1977 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Conference Proceedings written by Society of Plastics Engineers. Technical Conference and published by . This book was released on 2003 with total page 1344 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Injection Molding Fundamentals 2000 written by and published by . This book was released on 2000 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Composite Materials written by Kamal K. Kar and published by Springer. This book was released on 2016-10-14 with total page 694 pages. Available in PDF, EPUB and Kindle. Book excerpt: Composite materials are used as substitutions of metals/traditional materials in aerospace, automotive, civil, mechanical and other industries. The present book collects the current knowledge and recent developments in the characterization and application of composite materials. To this purpose the volume describes the outstanding properties of this class of advanced material which recommend it for various industrial applications.
Download or read book Theory and Applications of Colloidal Suspension Rheology written by Norman J. Wagner and published by Cambridge University Press. This book was released on 2021-04-15 with total page 437 pages. Available in PDF, EPUB and Kindle. Book excerpt: Essential text on the practical application and theory of colloidal suspension rheology, written by an international coalition of experts.
Download or read book Engineered Materials Abstracts written by and published by . This book was released on 1994-10 with total page 648 pages. Available in PDF, EPUB and Kindle. Book excerpt:
