Download or read book Proceedings of the EWG DSS Liverpool 2012 Workshop written by F. Dargam and published by EWG-DSS. This book was released on 2012-04-12 with total page 157 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Simulation Product Design and Development written by M. S. Shunmugam and published by Springer Nature. This book was released on 2019-11-06 with total page 839 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume comprises select proceedings of the 7th International and 28th All India Manufacturing Technology, Design and Research conference 2018 (AIMTDR 2018). The papers in this volume discuss simulations based on techniques such as finite element method (FEM) as well as soft computing based techniques such as artificial neural network (ANN), their optimization and the development and design of mechanical products. This volume will be of interest to researchers, policy makers, and practicing engineers alike.
Download or read book Index to Theses with Abstracts Accepted for Higher Degrees by the Universities of Great Britain and Ireland and the Council for National Academic Awards written by and published by . This book was released on 2007 with total page 694 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Model Engineering for Simulation written by Lin Zhang and published by Academic Press. This book was released on 2019-02-27 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: Model Engineering for Simulation provides a systematic introduction to the implementation of generic, normalized and quantifiable modeling and simulation using DEVS formalism. It describes key technologies relating to model lifecycle management, including model description languages, complexity analysis, model management, service-oriented model composition, quantitative measurement of model credibility, and model validation and verification. The book clearly demonstrates how to construct computationally efficient, object-oriented simulations of DEVS models on parallel and distributed environments. - Guides systems and control engineers in the practical creation and delivery of simulation models using DEVS formalism - Provides practical methods to improve credibility of models and manage the model lifecycle - Helps readers gain an overall understanding of model lifecycle management and analysis - Supported by an online ancillary package that includes an instructors and student solutions manual
Download or read book Enabling Manufacturing Competitiveness and Economic Sustainability written by Hoda A. ElMaraghy and published by Springer Science & Business Media. This book was released on 2011-09-29 with total page 674 pages. Available in PDF, EPUB and Kindle. Book excerpt: The changing manufacturing environment requires more responsive and adaptable manufacturing systems. The theme of the 4th International Conference on Changeable, Agile, Reconfigurable and Virtual production (CARV2011) is “Enabling Manufacturing Competitiveness and Economic Sustainability”. Leading edge research and best implementation practices and experiences, which address these important issues and challenges, are presented. The proceedings include advances in manufacturing systems design, planning, evaluation, control and evolving paradigms such as mass customization, personalization, changeability, re-configurability and flexibility. New and important concepts such as the dynamic product families and platforms, co-evolution of products and systems, and methods for enhancing manufacturing systems’ economic sustainability and prolonging their life to produce more than one product generation are treated. Enablers of change in manufacturing systems, production volume and capability scalability and managing the volatility of markets, competition among global enterprises and the increasing complexity of products, manufacturing systems and management strategies are discussed. Industry challenges and future directions for research and development needed to help both practitioners and academicians are presented.
Download or read book Proceedings of the 27th International Conference on Systems Engineering ICSEng 2020 written by Henry Selvaraj and published by Springer Nature. This book was released on 2021-01-06 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers topics such as AeroSpace Systems, Intelligent Systems, Machine Learning and Analytics, Internet of Things, Applied Media Informatics and Technology, Adaptive Control Systems, Software Engineering and Cyber-Physical Systems. Research in the discipline of Systems Engineering is an important concept in the advancement of engineering and information sciences. Systems Engineering attempts to integrate many of the traditional engineering disciplines to solve large complex functioning engineering systems, dependent on components from all the disciplines. The research papers contained in these proceedings reflect the state of the art in Systems Engineering from all over the world and serve as vital references to researchers to follow. This book is a very good resource for graduate students, researchers and scholars who want to learn about the most recent development in the fields.
Download or read book Industrial Engineering and Applications written by L.-C. Tang and published by IOS Press. This book was released on 2023-08-09 with total page 880 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of industrial engineering (IE) has a very wide scope, from production processes and automation to supply chain management, but the scope of IE techniques has expanded beyond the traditional domains of application, and is now relevant to areas that matter most to society at large. This book presents the proceedings of ICIEA 2023, the 10th International Conference on Industrial Engineering and Applications, held in Phuket, Thailand, from 4 to 6 April 2023. The conference was conducted in hybrid mode, with close to 100 delegates attending in person and about 50 participants attending online. A total of 272 submissions were received for the conference, of which 120 were accepted for presentation with 83 of those published here as full papers. These papers cover a wide range of topics within the scope of industrial and systems engineering, including but not limited to: supply chain and logistics; quality and reliability; advanced manufacturing; and production scheduling to ergonomics and man-machine systems interfaces. In particular, a significant number of papers are devoted to machine learning techniques and applications beyond the traditional manufacturing sector, to include healthcare, sustainability assessment, and other social issues. Offering an overview of recent research and novel applications, the book will be of interest to all those whose work involves the application of industrial engineering techniques.
Download or read book New Technologies Development and Application VII written by Isak Karabegovic and published by Springer Nature. This book was released on with total page 781 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Production Management Systems Initiatives for a Sustainable World written by Irenilza Nääs and published by Springer. This book was released on 2017-03-15 with total page 956 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed post-conference proceedings of the International IFIP WG 5.7 Conference on Advances in Production Management Systems, APMS 2016, held in Iguassu Falls, Brazil, in September 2016. The 117 revised full papers were carefully reviewed and selected from 164 submissions. They are organized in the following topical sections: computational intelligence in production management; intelligent manufacturing systems; knowledge-based PLM; modelling of business and operational processes; virtual, digital and smart factory; flexible, sustainable supply chains; large-scale supply chains; sustainable manufacturing; quality in production management; collaborative systems; innovation and collaborative networks; agrifood supply chains; production economics; lean manufacturing; cyber-physical technology deployments in smart manufacturing systems; smart manufacturing system characterization; knowledge management in production systems; service-oriented architecture for smart manufacturing systems; advances in cleaner production; sustainable production management; and operations management in engineer-to-order manufacturing.
Download or read book Enabling Manufacturing Competitiveness and Economic Sustainability written by Michael F. Zaeh and published by Springer Science & Business Media. This book was released on 2013-09-12 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: The changing manufacturing environment requires more responsive and adaptable manufacturing systems. The theme of the 5th International Conference on Changeable, Agile, Reconfigurable and Virtual production (CARV2013) is "Enabling Manufacturing Competitiveness and Economic Sustainability. Leading edge research and best implementation practices and experiences, which address these important issues and challenges, are presented. The proceedings include advances in manufacturing systems design, planning, evaluation, control and evolving paradigms such as mass customization, personalization, changeability, re-configurability and flexibility. New and important concepts such as the dynamic product families and platforms, co-evolution of products and systems, and methods for enhancing manufacturing systems' economic sustainability and prolonging their life to produce more than one product generation are treated. Enablers of change in manufacturing systems, production volume and capability, scalability and managing the volatility of markets, competition among global enterprises and the increasing complexity of products, manufacturing systems and management strategies are discussed. Industry challenges and future directions for research and development needed to help both practitioners and academicians are presented. About the Editor Prof. Dr.-Ing. Michael F. Zaeh, born in 1963, has been and is Professor for and Manufacturing Technology since 2002 and, together with Prof. Dr.-Ing. Gunther Reinhart, Head of the Institute for Machine Tools and Industrial Management (iwb) at the Technische Universitaet Muenchen (TUM). After studying general mechanical engineering, he was doctoral candidate under Prof. Dr.-Ing. Joachim Milberg at TUM from 1990 until 1993 and received his doctorate in 1993. From 1994 to 1995, he was department leader under Prof. Dr.-Ing. Gunther Reinhart. From 1996 to 2002, he worked for a machine tool manufacturer in several positions, most recently as a member of the extended management. Prof. Dr.-Ing. Michael F. Zaeh is an associated member of the CIRP and member of acatech, WGP and WLP. His current researches include among others Joining and Cutting Technologies like Laser Cutting and Welding as well as Friction Stir Welding, Structural Behaviour and Energy Efficiency of Machine Tools and Manufacturing Processes like Additive Manufacturing.
Download or read book Army RD A written by and published by . This book was released on 1999 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: Professional publication of the RD & A community.
Download or read book Learning Factories of the Future written by Sebastian Thiede and published by Springer Nature. This book was released on 2024 with total page 395 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents peer-reviewed papers from 14th International Conference on Learning Factories (CLF 2024) that took place from April 17-19, 2024, at the University of Twente, the Netherlands. CLF 2024 continued the successful CLF conference series targeting the latest research and development in the field of learning factories. The book is organized into two volumes and covers state-of-the-art research insights towards Learning Factories of the Future including learning factory design, Industry 5.0, digital twinning and VR/AR, 5G/6G in learning factories, AI for manufacturing systems, human-centred work design, human-robot collaboration, sustainability in learning factories, as well as cross-learning factory product/production systems. The book seamlessly integrates theory with real-world practice, empowering learners such as students, qualified engineers, and workers to keep pace with rapidly evolving technologies and methodologies, through enhancing learning factories. It also helps society and industry effectively manage future transitions with addressing current topics around digitalization, sustainability, and lifelong learning in industry.
Download or read book Advances in Design Simulation and Manufacturing VII written by Vitalii Ivanov and published by Springer Nature. This book was released on with total page 542 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Multi Agent Based Simulation X written by Gennaro Di Tosto and published by Springer Science & Business Media. This book was released on 2010-06-17 with total page 155 pages. Available in PDF, EPUB and Kindle. Book excerpt: The LNAI series reports state-of-the-art results in artificial intelligence research, development, and education, at a high level and in both printed and electronic form. Enjoying tight cooperation with the R&D community, with numerous individuals, as well as with prestigious organizations and societies, LNAI has grown into the most comprehensive artificial intelligence research forum available. The scope of LNAI spans the whole range of artificial intelligence and intelligent information processing including interdisciplinary topics in a variety of application fields. In parallel to the printed book, each new volume is published electronically in LNCS Online.
Download or read book Ambient Communications and Computer Systems written by Gregorio Martinez Perez and published by Springer. This book was released on 2018-03-20 with total page 755 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes high-quality, peer-reviewed papers from the International Conference on Recent Advancement in Computer, Communication and Computational Sciences (RACCCS-2017), held at Aryabhatta College of Engineering & Research Center, Ajmer, India on September 2–3, 2017, presenting the latest developments and technical solutions in computational sciences. Data science, data- and knowledge engineering require networking and communication as a backbone and have a wide scope of implementation in engineering sciences. Keeping this ideology in mind, the book offers insights that reflect the advances in these fields from upcoming researchers and leading academicians across the globe. Covering a variety of topics, such as intelligent hardware and software design, advanced communications, intelligent computing technologies, advanced software engineering, the web and informatics, and intelligent image processing, it helps those in the computer industry and academia use the advances of next-generation communication and computational technology to shape real-world applications.
Download or read book Army RD A Bulletin written by and published by . This book was released on 1999-05 with total page 84 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Middleware 2012 written by Priya Narasimhan and published by Springer. This book was released on 2012-11-11 with total page 511 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the ACM/IFIP/USENIX 13th International Middleware Conference, held in Montreal, Canada, in December 2012. The 24 revised full papers presented were carefully reviewed and selected from 125 submissions. The papers are organized in topical sections on mobile middleware; tracing and diagnosis; architecture and performance; publish/subscribe middleware; and big-data and cloud computing; availability, security and privacy.
