Download or read book A Framework for a Supervisory Expert System for Robotic Manipulators with Joint Position Limits and Joint Rate Limits written by and published by . This book was released on 1998 with total page 26 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report addresses the problem of path planning and control of robotic manipulators which have joint-position limits and joint-rate limits. The manipulators move autonomously and carry out variable tasks in a dynamic, unstructured and cluttered environment. The issue considered is whether the robotic manipulator can achieve all its tasks, and if it cannot, the objective is to identify the closest achievable goal. This problem is formalized and systematically solved for generic manipulators by using inverse kinematics and forward kinematics. Inverse kinematics are employed to define the subspace, workspace and constrained workspace, which are then used to identify when a task is not achievable. The closest achievable goal is obtained by determining weights for an optimal control redistribution scheme. These weights are quantified by using forward kinematics. Conditions leading to joint rate limits are identified, in particular it is established that all generic manipulators have singularities at the boundary of their workspace, while some have loci of singularities inside their workspace. Once the manipulator singularity is identified the command redistribution scheme is used to compute the closest achievable Cartesian velocities. Two examples are used to illustrate the use of the algorithm: A three link planar manipulator and the Unimation Puma 560. Implementation of the derived algorithm is effected by using a supervisory expert system to check whether the desired goal lies in the constrained workspace and if not, to evoke the redistribution scheme which determines the constraint relaxation between end effector position and orientation, and then computes optimal gains.
Download or read book A Framework for a Supervisory Expert System for Robotic Manipulators with Joint Position Limits and Joint Rate Limits written by National Aeronautics and Space Administration (NASA) and published by Createspace Independent Publishing Platform. This book was released on 2018-08-09 with total page 38 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report addresses the problem of path planning and control of robotic manipulators which have joint-position limits and joint-rate limits. The manipulators move autonomously and carry out variable tasks in a dynamic, unstructured and cluttered environment. The issue considered is whether the robotic manipulator can achieve all its tasks, and if it cannot, the objective is to identify the closest achievable goal. This problem is formalized and systematically solved for generic manipulators by using inverse kinematics and forward kinematics. Inverse kinematics are employed to define the subspace, workspace and constrained workspace, which are then used to identify when a task is not achievable. The closest achievable goal is obtained by determining weights for an optimal control redistribution scheme. These weights are quantified by using forward kinematics. Conditions leading to joint rate limits are identified, in particular it is established that all generic manipulators have singularities at the boundary of their workspace, while some have loci of singularities inside their workspace. Once the manipulator singularity is identified the command redistribution scheme is used to compute the closest achievable Cartesian velocities. Two examples are used to illustrate the use of the algorithm: A three link planar manipulator and the Unimation Puma 560. Implementation of the derived algorithm is effected by using a supervisory expert system to check whether the desired goal lies in the constrained workspace and if not, to evoke the redistribution scheme which determines the constraint relaxation between end effector position and orientation, and then computes optimal gains. Mutambara, Arthur G. O. and Litt, Jonathan Glenn Research Center NASA/TM-1998-208845, NAS 1.15:208845, E-11458, ARL-TR-1855 RTOP 505-23-0Z; DA Proj. 1L1-61102-AH-45...
Download or read book Intelligent Communication Control and Devices written by Rajesh Singh and published by Springer. This book was released on 2018-04-10 with total page 1729 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book focuses on the integration of intelligent communication systems, control systems, and devices related to all aspects of engineering and sciences. It contains high-quality research papers presented at the 2nd international conference, ICICCD 2017, organized by the Department of Electronics, Instrumentation and Control Engineering of University of Petroleum and Energy Studies, Dehradun on 15 and 16 April, 2017. The volume broadly covers recent advances of intelligent communication, intelligent control and intelligent devices. The work presented in this book is original research work, findings and practical development experiences of researchers, academicians, scientists and industrial practitioners.
Download or read book Monthly Catalog of United States Government Publications written by and published by . This book was released on 1999-07 with total page 1154 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Robot Manipulator Control written by Frank L. Lewis and published by CRC Press. This book was released on 2003-12-12 with total page 646 pages. Available in PDF, EPUB and Kindle. Book excerpt: Robot Manipulator Control offers a complete survey of control systems for serial-link robot arms and acknowledges how robotic device performance hinges upon a well-developed control system. Containing over 750 essential equations, this thoroughly up-to-date Second Edition, the book explicates theoretical and mathematical requisites for controls design and summarizes current techniques in computer simulation and implementation of controllers. It also addresses procedures and issues in computed-torque, robust, adaptive, neural network, and force control. New chapters relay practical information on commercial robot manipulators and devices and cutting-edge methods in neural network control.
Download or read book Virtual Reality written by National Research Council and published by National Academies Press. This book was released on 1995-01-13 with total page 557 pages. Available in PDF, EPUB and Kindle. Book excerpt: Despite widespread interest in virtual reality, research and development efforts in synthetic environments (SE)â€"the field encompassing virtual environments, teleoperation, and hybridsâ€"have remained fragmented. Virtual Reality is the first integrated treatment of the topic, presenting current knowledge along with thought-provoking vignettes about a future where SE is commonplace. This volume discusses all aspects of creating a system that will allow human operators to see, hear, smell, taste, move about, give commands, respond to conditions, and manipulate objects effectively in a real or virtual environment. The committee of computer scientists, engineers, and psychologists on the leading edge of SE development explores the potential applications of SE in the areas of manufacturing, medicine, education, training, scientific visualization, and teleoperation in hazardous environments. The committee also offers recommendations for development of improved SE technology, needed studies of human behavior and evaluation of SE systems, and government policy and infrastructure.
Download or read book Handbook of Robotic and Image Guided Surgery written by Mohammad Hossein Abedin Nasab and published by Elsevier. This book was released on 2019-09-25 with total page 753 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Robotic and Image-Guided Surgery provides state-of-the-art systems and methods for robotic and computer-assisted surgeries. In this masterpiece, contributions of 169 researchers from 19 countries have been gathered to provide 38 chapters. This handbook is 744 pages, includes 659 figures and 61 videos. It also provides basic medical knowledge for engineers and basic engineering principles for surgeons. A key strength of this text is the fusion of engineering, radiology, and surgical principles into one book. - A thorough and in-depth handbook on surgical robotics and image-guided surgery which includes both fundamentals and advances in the field - A comprehensive reference on robot-assisted laparoscopic, orthopedic, and head-and-neck surgeries - Chapters are contributed by worldwide experts from both engineering and surgical backgrounds
Download or read book Fault Diagnosis and Fault Tolerant Control Strategies for Non Linear Systems written by Marcin Witczak and published by Springer Science & Business Media. This book was released on 2013-12-11 with total page 239 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents selected fault diagnosis and fault-tolerant control strategies for non-linear systems in a unified framework. In particular, starting from advanced state estimation strategies up to modern soft computing, the discrete-time description of the system is employed Part I of the book presents original research results regarding state estimation and neural networks for robust fault diagnosis. Part II is devoted to the presentation of integrated fault diagnosis and fault-tolerant systems. It starts with a general fault-tolerant control framework, which is then extended by introducing robustness with respect to various uncertainties. Finally, it is shown how to implement the proposed framework for fuzzy systems described by the well-known Takagi–Sugeno models. This research monograph is intended for researchers, engineers, and advanced postgraduate students in control and electrical engineering, computer science, as well as mechanical and chemical engineering.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1991 with total page 1460 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lists citations with abstracts for aerospace related reports obtained from world wide sources and announces documents that have recently been entered into the NASA Scientific and Technical Information Database.
Download or read book Robotics written by Bruno Siciliano and published by Springer Science & Business Media. This book was released on 2010-08-20 with total page 644 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on the successful Modelling and Control of Robot Manipulators by Sciavicco and Siciliano (Springer, 2000), Robotics provides the basic know-how on the foundations of robotics: modelling, planning and control. It has been expanded to include coverage of mobile robots, visual control and motion planning. A variety of problems is raised throughout, and the proper tools to find engineering-oriented solutions are introduced and explained. The text includes coverage of fundamental topics like kinematics, and trajectory planning and related technological aspects including actuators and sensors. To impart practical skill, examples and case studies are carefully worked out and interwoven through the text, with frequent resort to simulation. In addition, end-of-chapter exercises are proposed, and the book is accompanied by an electronic solutions manual containing the MATLAB® code for computer problems; this is available free of charge to those adopting this volume as a textbook for courses.
Download or read book Index to IEEE Publications written by Institute of Electrical and Electronics Engineers and published by . This book was released on 1987 with total page 832 pages. Available in PDF, EPUB and Kindle. Book excerpt: Issues for 1973- cover the entire IEEE technical literature.
Download or read book The ROV Manual written by Robert D Christ and published by Elsevier. This book was released on 2011-04-01 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt: The ROV Manual: A User Guide for Observation-Class Remotely Operated Vehicles is the first manual to provide a basic ""How To"" for using small observation-class ROVs for surveying, inspection and research procedures. It serves as a user guide that offers complete training and information about ROV operations for technicians, underwater activities enthusiasts, and engineers working offshore. The book focuses on the observation-class ROV and underwater uses for industrial, recreational, commercial, and scientific studies. It provides information about marine robotics and navigation tools used to obtain mission results and data faster and more efficiently. This manual also covers two common denominators: the technology and its application. It introduces the basic technologies needed and their relationship to specific requirements; and it helps identify the equipment essential for a cost-effective and efficient operation. This user guide can be invaluable in marine research and surveying, crime investigations, harbor security, military and coast guarding, commercial boating, diving and fishing, nuclear energy and hydroelectric inspection, and ROV courses in marine and petroleum engineering.*The first book to focus on observation class ROV (Remotely Operated Vehicle) underwater deployment in real conditions for industrial, commercial, scientific and recreational tasks *A complete user guide to ROV operation with basic information on underwater robotics and navigation equipment to obtain mission results quickly and efficiently *Ideal for anyone involved with ROVs complete with self-learning questions and answers
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1993 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Documentation Abstracts written by and published by . This book was released on 1993 with total page 736 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Neural Network Control Of Robot Manipulators And Non Linear Systems written by F W Lewis and published by CRC Press. This book was released on 1998-11-30 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: There has been great interest in "universal controllers" that mimic the functions of human processes to learn about the systems they are controlling on-line so that performance improves automatically. Neural network controllers are derived for robot manipulators in a variety of applications including position control, force control, link flexibility stabilization and the management of high-frequency joint and motor dynamics. The first chapter provides a background on neural networks and the second on dynamical systems and control. Chapter three introduces the robot control problem and standard techniques such as torque, adaptive and robust control. Subsequent chapters give design techniques and Stability Proofs For NN Controllers For Robot Arms, Practical Robotic systems with high frequency vibratory modes, force control and a general class of non-linear systems. The last chapters are devoted to discrete- time NN controllers. Throughout the text, worked examples are provided.
Download or read book Disturbance Observer Based Control written by Shihua Li and published by CRC Press. This book was released on 2016-04-19 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: Due to its abilities to compensate disturbances and uncertainties, disturbance observer based control (DOBC) is regarded as one of the most promising approaches for disturbance-attenuation. One of the first books on DOBC, Disturbance Observer Based Control: Methods and Applications presents novel theory results as well as best practices for applica
Download or read book ROMANSY 21 Robot Design Dynamics and Control written by Vincenzo Parenti-Castelli and published by Springer. This book was released on 2016-06-29 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings volume contains papers that have been selected after review for oral presentation at ROMANSY 2016, the 21th CISM-IFToMM Symposium on Theory and Practice of Robots and Manipulators. These papers cover advances on several aspects of the wide field of Robotics as concerning Theory and Practice of Robots and Manipulators. ROMANSY 2016 is the 21st event in a series that started in 1973 as one of the first conference activities in the world on Robotics. The first event was held at CISM (International Centre for Mechanical Science) in Udine, Italy on 5-8 September 1973. It was also the first topic conference of IFToMM (International Federation for the Promotion of Mechanism and Machine Science) and it was directed not only to the IFToMM community.
