Download or read book Energetic Materials written by Manoj K. Shukla and published by Springer. This book was released on 2017-10-09 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a comprehensive account of energetic materials, including their synthesis, computational modeling, applications, associated degradation mechanisms, environmental consequences and fate and transport. This multi-author contributed volume describes how armed forces around the world are moving their attention from legacy explosive compounds, which are heat and shock sensitive (thus posing greater challenges in terms of handling and storage), to the insensitive munitions compounds/formulations such as insensitive munitions explosive (IMX) and the Picatinny Arsenal Explosive (PAX) series of compounds. The description of energetic materials focuses on explosives, pyrotechnic compositions, and propellants. The contributors go on to explain how modern generation energetic compounds must be insensitive to shock and heat but at the same time yield more energy upon explosion. Nanoinspired and/or co-crystallized energetic materials offer another route to generate next-generation energetic materials, and this authoritative book bridges a large gap in the literature by providing a comprehensive analysis of these compounds. Additionally, it includes a valuable overview of energetic materials, a detailed discussion of recent advances on future energetic compounds, nanotechnology in energetic materials, environmental contamination and toxicity, assessment of munitions lethality, the application quantitative structure–activity relationship (QSAR) in design of energetics and the fate and transport of munition compounds in the environment.

Download or read book Computational Ballistics III written by C. A. Brebbia and published by WIT Press. This book was released on 2007 with total page 257 pages. Available in PDF, EPUB and Kindle. Book excerpt: Containing the proceedings of the Third International Conference on Computational Ballistics, this book presents new ideas and advanced developments in the field of study of Computational Ballistics. Ballistic studies include applications as varied as the study of the structural and control behavior of rockets and communication satellites; bird strike effects on commercial aircraft, terrorist attacks and automobile crack worthiness modelling. Many basic problems of ballistics are similar to those in other fields of applications, such as combustion, heat conduction, in-flight structural behaviour, trajectory related issues, contact, impact, penetration, structural response to shock waves and many others.A valuable contribution to its field, this text will be of interest to researchers involved in the different areas of computational ballistics and their relationship between computational methods and experiments. Notable topics include: Systems and Technolog; Combustion and Heat Transfer; Propellants; Fluid Dynamics; Fluid Flow and Aerodynamics; In-Flight Structural Behaviour and Material Response; Guidance and Control; Perforation and Penetration Mechanics; Fluid-structure Interaction; Experimental Mechanics/ballistic and Field Testing; High Rate Loads; Composite Material; Shock and Impact.

Download or read book Conventional Warhead Systems Physics and Engineering Design written by Richard M. Lloyd and published by AIAA (American Institute of Aeronautics & Astronautics). This book was released on 1998 with total page 664 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first book written that discusses the physics of designing warheads against ballistic missiles. In his exploration of the mathematical equations and logic behind antiballistic missiles (ATBMs) warhead design, Lloyd takes an in-depth look at warhead design and endgame concepts against ATBMs. Hailed as the perfect companion to Tactical Missile Warheads, the book demonstrates the system aspects you will need as a systems warhead engineer designing complex tactical and defense warheads under tight budgetary constraints. Conventional Warhead Systems Physics and Engineering Design features a previously unpublished investigation of energy, momentum, and methods for estimating damage on very complex ballistic missile payloads, such as submunitions of chemical and biological nature. Direct hit, warhead design, and fragmentation are comprehensively discussed for the first time in print. High strain rate, explosives, thermodynamics, heat transfer, chemistry, penetration mechanics, statistics, dynamics, and finite element equations are also covered extensively in this single, compact volume. The book contains over 2000 mathematical equations with more than 500 figures that give todays warhead engineers new ideas and knowledge in warhead design. MATLAB is a registered trademark of The MathWorks, Inc.

Download or read book Nonlinear Approaches in Engineering Applications written by Liming Dai and published by Springer. This book was released on 2018-01-29 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book analyzes the updated principles and applications of nonlinear approaches to solve engineering and physics problems. The knowledge on nonlinearity and the comprehension of nonlinear approaches are inevitable to future engineers and scientists, making this an ideal book for engineers, engineering students, and researchers in engineering, physics, and mathematics. Chapters are of specific interest to readers who seek expertise in optimization, nonlinear analysis, mathematical modeling of complex forms, and non-classical engineering problems. The book covers methodologies and applications from diverse areas such as vehicle dynamics, surgery simulation, path planning, mobile robots, contact and scratch analysis at the micro and nano scale, sub-structuring techniques, ballistic projectiles, and many more.

Download or read book Advances in Mechanical and Materials Technology written by Kannan Govindan and published by Springer Nature. This book was released on 2022-01-01 with total page 1422 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents select papers from the International Conference on Energy, Material Sciences and Mechanical Engineering (EMSME) - 2020. The book covers the three core areas of energy, material sciences and mechanical engineering. The topics covered include non-conventional energy resources, energy harvesting, polymers, composites, 2D materials, systems engineering, materials engineering, micro-machining, renewable energy, industrial engineering and additive manufacturing. This book will be useful to researchers and professionals working in the areas of mechanical and industrial engineering, materials applications, and energy technology.

Download or read book BALLISTICS 2016 written by Clive Woodley and published by DEStech Publications, Inc. This book was released on 2016-05-22 with total page 1277 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents high-level research on various caliber guns, cannon, mortars, drones, warheads, shells, bullets, drills and other launchers and penetrants, as well as their impact effects on natural and designed materials, including large-scale targets and body armors Provides new modeling and test data on projectile design and guidance, propellants, charges and explosives for military, aerospace and civil engineering applicationsOver 250 presentations in two printed volumes, plus searchable CD This book makes available original ballistics technology from around the world on a wide variety of weapons and their effects, including the design and trajectory/stability control of dozens of projectiles ranging from shells to missiles. The book's authors discuss the efficacy and development of propellants, munitions, and igniters and offer new approaches for modeling and testing. Also investigated in Volume 1 are shielding and protection strategies for individual persons and other targets. Volume 2 offers research on the mechanical behavior of multiple types of explosives, as well as impact and penetration data from projectile effects on surfaces ranging from natural phenomena such as water and soils to metallic plating and material-engineered armors. Papers in these volumes were presented at a conference organized by the National Defense Industrial Association (NDIA) with the International Ballistics Society.

Download or read book Dynamic Behavior of Soft and Hard Materials Volume 2 written by R. Velmurugan and published by Springer Nature. This book was released on with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Proceedings of the Military Government and Aerospace Simulation MGA 2001 written by Michael J. Chinni and published by . This book was released on 2001 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Ordnance Engineering Design Handbook written by United States. Army. Ordnance Corps and published by . This book was released on 1959 with total page 824 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book High Pressure Shock Compression of Solids II written by Lee Davison and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume concerns the fracture and fragmentation of solid materials that occurs when they are subjected to extremes of stress applied at the highest possible rates. The plan for the volume is to address experimental, theoretical, and com putational aspects of high-rate dynamic fracture and fragmentation, with emphasis on recent work. We begin with several chapters in which the emphasis falls on experimental methods and observations. These chapters address both macroscopic responses and the microscopic cause of these re sponses. This is followed by several chapters emphasizing modeling-the physical explanation and mathematical representation of the observations. Some of the models are deterministic, while others focus on the stochastic aspects of the observations. Often, the ov\!rall objective of investigation of dynamic fracture and fragmentation phenomena is provision of a means for predicting the entire course of an event that begins with a stimulus such as an impact and proceeds through a complicated deformation and fracture pro cess that results in disintegration of the body and formation of a rapidly expanding cloud of debris fragments. Analysis of this event usually involves development of a continuum theory and computer code that captures the experimental observations by incorporating models of the important pheno mena into a comprehensive description of the deformation and fracture pro cess. It is to this task that the work of the last few chapters is devoted.

Download or read book BALLISTICS 2014 written by Richard G. Ames and published by DEStech Publications, Inc. This book was released on 2014-10-01 with total page 951 pages. Available in PDF, EPUB and Kindle. Book excerpt: Original research from around the world on weapons-grade projectiles, warheads, missiles, guns and their effects on target materialsNew information on shaped charges, fire, control strategies, simulation, blast resistance, non-lethal systems and more190 original presentations in two printed volumes, plus searchable CD The first part of this 2-volume set, part of an ongoing series, presents previously unpublished research on the design and modeling of ballistic devices ranging from shells to missiles, including explosives, propellants and internal components. The second part investigates the effects of ballistic penetrants on a variety of targets, including human models, as well as hard targets and diverse armors made from engineered fibers, ceramics, metal alloys and concrete. Data is included on the modeling and testing of novel devices, explosives and shielding strategies. Papers in this text were presented at a symposium organized by the National Defense Industrial Association with the International Ballistics Society. The CD-ROM displays figures and illustrations in articles in full color along with a title screen and main menu screen. Each user can link to all papers from the Table of Contents and Author Index and also link to papers and front matter by using the global bookmarks which allow navigation of the entire CD-ROM from every article. Search features on the CD-ROM can be by full text including all key words, article title, author name, and session title. The CD-ROM has Autorun feature for Windows 2000 with Service Pack 4 or higher products along with the program for Adobe Acrobat Reader with Search 11.0. One year of technical support is included with your purchase of this product.

Download or read book Report January 1968 written by United States. Select Commission on Western Hemisphere Immigration and published by . This book was released on 1968 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Alternative Technologies to Replace Antipersonnel Landmines written by National Research Council and published by National Academies Press. This book was released on 2001-04-21 with total page 141 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book examines potential technologies for replacing antipersonnel landmines by 2006, the U.S. target date for signing an international treaty banning these weapons. Alternative Technologies to Replace Antipersonnel Landmines emphasizes the role that technology can play to allow certain weapons to be used more selectively, reducing the danger to uninvolved civilians while improving the effectiveness of the U.S. military. Landmines are an important weapon in the U.S. military's arsenal but the persistent variety can cause unintended casualties, to both civilians and friendly forces. New technologies could replace some, but not all, of the U.S. military's antipersonnel landmines by 2006. In the period following 2006, emerging technologies might eliminate the landmine totally, while retaining the necessary functionalities that today's mines provide to the military.

Download or read book Ballistics 2011 written by Ernest Baker and published by DEStech Publications, Inc. This book was released on 2011-09 with total page 2230 pages. Available in PDF, EPUB and Kindle. Book excerpt: Includes papers that were first presented at a September 2011 conference organized by the National Defense Industrial Association and the International Ballistics Society. This title includes a CD-ROM that displays figures and illustrations in articles in full color along with a title screen and main menu screen.

Download or read book Fundamentals of Shaped Charges written by William P. Walters and published by Wiley-Interscience. This book was released on 1989 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: An introduction to the art and science of developing shaped charges. Presents the history of shaped charges, the principles governing their design, and a variety of example applications. Includes discussion of Gurney and Taylor methods, jet formation, the visco-plastic model, jet penetration, fabrication, computational aspects, and how to design shaped charges for different applications. Annotation copyrighted by Book News, Inc., Portland, OR

Download or read book Fragmentation of Rings and Shells written by Dennis Grady and published by Springer Science & Business Media. This book was released on 2007-07-13 with total page 375 pages. Available in PDF, EPUB and Kindle. Book excerpt: For a brief period during the latter part of World War II, Nevill F. Mott led a theoretical group at Fort Halstead in the United Kingdom that tackled scientific issues related to pressing war-time concerns. Among later awards and honors, Mott was knighted and a recipient of the Nobel Prize. While at Fort Halstead, he undertook an effort to theoretically describe the statistical fragmentation of munitions subjected to intense explosive loading. Mott`s original internal reports contain seminal theoretical concepts on the physics and statistics of dynamic fracture and fragmentation, which have provided the inspiration for numerous later modeling efforts and engineering formulae. Some of his most forward-looking thoughts on the micromechanical and molecular aspects of fracture are included in these publications. The present book surveys the theoretical analysis put forth by Mott with particular focus on his efforts to characterize the size and distribution of fragments resulting from a dynamic fragmentation event. Copies of the original internal reports of Mott and his co-workers are included. The book also pursues additional theoretical analysis with the intent of delving further into the physical ideas and unfinished analysis implicit in Mott`s original studies. This book will be of interest to all scientists and engineers concerned with the dynamic fracture and fragmentation of solid bodies subject to intense transient loads imparted by explosive detonation and high-velocity impact from both the historical and modern perspective.

Download or read book Fatigue and Durability of Structural Materials written by Gary R. Halford and published by ASM International. This book was released on 2006 with total page 471 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fatigue and Durability of Structural Materials explains how mechanical material behavior relates to the design of structural machine components. The major emphasis is on fatigue and failure behavior using engineering models that have been developed to predict, in advance of service, acceptable fatigue and other durability-related lifetimes. The book covers broad classes of materials used for high-performance structural applications such as aerospace components, automobiles, and power generation systems. Coverage focuses on metallic materials but also addresses unique capabilities of important nonmetals. The concepts are applied to behavior at room or ambient temperatures; a planned second volume will address behavior at higher-temperatures. The volume is a repository of the most significant contributions by the authors to the art and science of material and structural durability over the past half century. During their careers, including 40 years of direct collaboration, they have developed a host of durability models that are based on sound physical and engineering principles. Yet, the models and interpretation of behavior have a unique simplicity that is appreciated by the practicing engineer as well as the beginning student. In addition to their own pioneering work, the authors also present the work of numerous others who have provided useful results that have moved progress in these fields. This book will be of immense value to practicing mechanical and materials engineers and designers charged with producing structural components with adequate durability. The coverage is appropriate for a range of technical levels from undergraduate engineering students through material behavior researchers and model developers. It will be of interest to personnel in the automotive and off-highway vehicle manufacturing industry, the aeronautical industry, space propulsion and the power generation/conversion industry, the electric power industry, the machine tool industry, and any industry associated with the design and manufacturing of mechanical equipment subject to cyclic loads.