Download or read book A Fatigue Life and Reliability Model for Gears written by J. H. Rumbarger and published by . This book was released on 1972-10-01 with total page 48 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Derivation of a Fatigue Life Model for Gears written by John H. Rumbarger and published by . This book was released on 1972 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt: A load-life model is developed for calculating the fatigue life and reliability of a spur gear mesh. The dynamic capacity of a gear mesh is defined as the tangential load which can be transmitted for one million pinion revolutions with a 90% probability of survival. The model is an extension of the currently accepted Lundberg-Palmgren Rolling Element Bearing Life Model. Limited rolling contact testing of cylindrical samples with and without traction in the contact was accomplished. At a low coefficient of traction (below 0.1), no statistically significant effect on fatigue life was noted. Scanning electron microscopy studies were performed of all test samples. One rolling test sample was SEM examined periodically during testing to observe initiation and progression of failure. Numerical examples are presented for the calculation of the dynamic capacity of a standard contact ratio and a high contact ratio spur gear mesh. (Author).

Download or read book System Life and Reliability Modeling for Helicopter Transmissions written by M. Savage and published by . This book was released on 1986 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: A computer program which simulates life and reliability of helicopter transmissions is presented. The helicopter transmissions may be composed of spiral bevel gear units and planetary gear units - alone, in series or in parallel. The spiral bevel gear units may have either single or dual input pinions, which are identical. The planetary gear units may be stepped or unstepped and the number of planet gears carried by the planet arm may be varied. The reliability analysis used in the program is based on the Weibull distribution lives of the transmission components. The computer calculates the system lives and dynamic capacities of the transmission components and the transmission. The system life is defined as the life of the component or transmission at an output torque at which the probability of survival is 90 percent. The dynamic capacity of a component or transmission is defined as the output torque which can be applied for one million output shaft cycles for a probability of survival of 90 percent. A complete summary of the life and dynamic capacity results is produced by the program.

Download or read book NASA Reference Publication written by and published by . This book was released on 1977 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book NASA Technical Note written by and published by . This book was released on 1975 with total page 834 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book ASME Technical Papers written by and published by . This book was released on 1985 with total page 682 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book NASA Tech Briefs written by and published by . This book was released on 1986 with total page 952 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Proceedings of Fatigue Durability and Fracture Mechanics written by S. Seetharamu and published by Springer. This book was released on 2017-11-01 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the proceedings of Fatigue Durability India 2016, which was held on September 28–30 at J N Tata Auditorium, Indian Institute of Science, Bangalore. This 2nd International Conference & Exhibition brought international industrial experts and academics together on a single platform to facilitate the exchange of ideas and advances in the field of fatigue, durability and fracture mechanics and its applications. This book comprises articles on a broad spectrum of topics from design, engineering, testing and computational evaluation of components and systems for fatigue, durability, and fracture mechanics. The topics covered include interdisciplinary discussions on working aspects related to materials testing, evaluation of damage, nondestructive testing (NDT), failure analysis, finite element modeling (FEM) analysis, fatigue and fracture, processing, performance, and reliability. The contents of this book will appeal not only to academic researchers, but also to design engineers, failure analysts, maintenance engineers, certification personnel, and R&D professionals involved in a wide variety of industries.

Download or read book Life and Dynamic Capacity Modeling for Aircraft Transmissions written by Michael Savage and published by DIANE Publishing. This book was released on 1991 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advanced Transmission Studies written by John J. Coy and published by . This book was released on 1988 with total page 18 pages. Available in PDF, EPUB and Kindle. Book excerpt: The NASA Lewis Research Center and the U.S. Army Aviation Systems Command share an interest in advancing the technology for helicopter propulsion systems. In particular, this paper presents highlights from that portion of the program in drive train technology and the related mechanical components. The major goals of the program are to increase life, reliability, and maintainability; reduce the weight, noise, and vibration; and maintain the relatively high mechanical efficiency of the gear train. The current activity emphasizes noise reduction technology and analytical code development followed by experimental verification. Selected significant advances in technology for transmissions are reviewed, including advanced configurations and new analytical tools. Finally, the plan for transmission research in the future is presented.

Download or read book Paper written by and published by . This book was released on 1985 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Reliability Abstracts and Technical Reviews written by and published by . This book was released on 1966 with total page 556 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Gear Drive Systems written by Peter Lynwander and published by CRC Press. This book was released on 2019-01-22 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: This outstanding reference provides the complete range of practical and theoretical information - with over 250 detailed illustartions, fugures and table- needed to design, manufacture and operate reliable, efficient gear drive systems, emphasizing parallel shaft and planetary units with spur and helical gearing.

Download or read book Advanced Wind Turbine Technology written by Weifei Hu and published by Springer. This book was released on 2018-05-07 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the current challenges in modern wind turbine analysis, design and development, and provides a comprehensive examination of state-of-the-art technologies from both academia and industry. The twelve information-rich chapters cover a wide range of topics including reliability-based design, computational fluid dynamics, gearbox and bearing analyses, lightning analysis, structural dynamics, health condition monitoring, advanced techniques for field repair, offshore floating wind turbines, advanced turbine control and grid integration, and other emerging technologies. Each chapter begins with the current status of technology in a lucid, is easy-to-follow treatment, then elaborates on the corresponding advanced technology using detailed methodologies, graphs, mathematical models, computational simulations, and experimental instrumentation. Relevant to a broad audience from students and faculty to researchers, manufacturers, and wind energy engineers and designers, the book is ideal for both educational and research needs. Presents the latest developments in reliability-based design optimization, CFD of wind turbines, structural dynamics for wind turbine blades, off-shore floating wind turbines, advanced wind turbine control, and wind power and ramp forecasting for grid integration; Includes techniques for wind turbine gearboxes and bearings, evaluation of lightning strike damage, health condition monitoring and reparation techniques; Illustrates theories and operational considerations using graphics, tables, computational algorithms, simulation models, and experimental instrumentation; Examines unique, innovative technologies for wind energy.

Download or read book Machine Design with CAD and Optimization written by Sayed M. Metwalli and published by John Wiley & Sons. This book was released on 2021-04-08 with total page 1008 pages. Available in PDF, EPUB and Kindle. Book excerpt: MACHINE DESIGN WITH CAD AND OPTIMIZATION A guide to the new CAD and optimization tools and skills to generate real design synthesis of machine elements and systems Machine Design with CAD and Optimization offers the basic tools to design or synthesize machine elements and assembly of prospective elements in systems or products. It contains the necessary knowledge base, computer aided design, and optimization tools to define appropriate geometry and material selection of machine elements. A comprehensive text for each element includes: a chart, excel sheet, a MATLAB® program, or an interactive program to calculate the element geometry to guide in the selection of the appropriate material. The book contains an introduction to machine design and includes several design factors for consideration. It also offers information on the traditional rigorous design of machine elements. In addition, the author reviews the real design synthesis approach and offers material about stresses and material failure due to applied loading during intended performance. This comprehensive resource also contains an introduction to computer aided design and optimization. This important book: Provides the tools to perform a new direct design synthesis rather than design by a process of repeated analysis Contains a guide to knowledge-based design using CAD tools, software, and optimum component design for the new direct design synthesis of machine elements Allows for the initial suitable design synthesis in a very short time Delivers information on the utility of CAD and Optimization Accompanied by an online companion site including presentation files Written for students of engineering design, mechanical engineering, and automotive design. Machine Design with CAD and Optimization contains the new CAD and Optimization tools and defines the skills needed to generate real design synthesis of machine elements and systems on solid ground for better products and systems.

Download or read book Wind Power Generation and Wind Turbine Design written by Wei Tong and published by WIT Press. This book was released on 2010-04-30 with total page 769 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this book is to provide engineers and researchers in both the wind power industry and energy research community with comprehensive, up-to-date, and advanced design techniques and practical approaches. The topics addressed in this book involve the major concerns in the wind power generation and wind turbine design.