Download or read book A Dynamic Load Distribution Model for Helical Gear Pairs Having Various Manufacturing Errors written by Michael Alan Benatar and published by . This book was released on 2022 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This dissertation research focuses on developing and experimentally validating a three-dimensional load distribution model for helical gear pairs that is suitable for both quasi-static and dynamic conditions. As one phase of this research, the modeling work is carried out in two main steps. The first step focuses on quasi-static conditions by (i) developing a generalized procedure to define instantaneous contact lines along the gear mesh interface, (ii) formulating the flexibility introduced by the support structures such as bearings and shafts in a systematic way, and (iii) including gear blank related manufacturing errors such as eccentricity and wobble. The contact problem under these conditions, governed by compatibility and equilibrium equations, are solved by using an iterative elastic contact algorithm. In the second step, dynamic effects are included in the model of the first step to develop a dynamic load distribution model of a helical gear pair having the same novel features of the quasi-static model. For this, the compatibility equations of the quasi-static model are coupled to the equations of motion in the state-space representation and solved by using a backward Euler method. The other phase of this research is focused on validation of the quasi-static and dynamic load distribution models. As very little experimental helical gear data is available in the literature, an experimental study is conducted to generate an extensive database for validation of the models of this study as well as for guiding future helical gear modeling efforts. The experimental study considers a family of unity-ratio helical gear pairs having varying amounts of micro-geometry modifications as well as several spur gears having certain manufacturing errors. An encoder-based measurement system is devised to quantify the static transmission error at various transmitted torque levels to form Harris charts and define the design load values. An accelerometer-based measurement system is also incorporated with the same setup to evaluate the dynamic transmission error of the same test articles within wide speed ranges of operation. The predictions of the proposed models are compared to the experimental measurements to demonstrate that the models are accurate under both quasi-static and dynamic conditions, with or without gear blank related manufacturing errors. Given their computational efficiency, the proposed models with their novel capabilities are suitable for design optimizations studies.
Download or read book New Trends in Mechanism and Machine Science written by Doina Pisla and published by Springer Nature. This book was released on 2020-08-20 with total page 539 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents the latest research and industrial applications in the areas of mechanism science, robotics and dynamics. The respective contributions cover such topics as computational kinematics, control issues in mechanical systems, mechanisms for medical rehabilitation, mechanisms for minimally invasive techniques, cable robots, design issues for mechanisms and robots, and the teaching and history of mechanisms. Written by leading researchers and engineers, and selected by means of a rigorous international peer-review process, the papers highlight numerous exciting ideas that will spur novel research directions and foster multidisciplinary collaborations. They reflect the outcomes of the 8th European Conference on Mechanism Science (EuCoMeS) in 2020.
Download or read book Journal of Mechanical Design written by and published by . This book was released on 2008-07 with total page 712 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Power Transmissions written by Datong Qin and published by CRC Press. This book was released on 2016-11-10 with total page 1081 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents papers from the International Conference on Power Transmissions 2016, held in Chongqing, China, 27th-30th October 2016. The main objective of this conference is to provide a forum for the most recent advances, addressing the challenges in modern mechanical transmissions. The conference proceedings address all aspects of gear and power transmission technology and a range of applications. The presented papers are catalogued into three main tracks, including design, simulation and testing, materials and manufacturing, and industrial applications. The design, simulation and testing track covers topics such as new methods and designs for all types of transmissions, modelling and simulation of power transmissions, strength, fatigue, dynamics and reliability of power transmissions, lubrication and sealing technologies and theories, and fault diagnosis of power transmissions. In the materials and manufacturing track, topics include new materials and heat treatment of power transmissions, new manufacturing technologies of power transmissions, improved tools to predict future demands on production systems, new technologies for ecologically sustainable productions and those which preserve natural resources, and measuring technologies of power transmissions. The proceedings also cover the novel industrial applications of power transmissions in marine, aerospace and railway contexts, wind turbines, the automotive industry, construction machinery, and robots.
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1974 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Gear Noise and Vibration written by J. Derek Smith and published by CRC Press. This book was released on 2003-04-08 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on over 40 years of consultation and teaching experience, Gear Noise and Vibration demonstrates logical gear noise and vibration approaches without the use of complex mathematics or lengthy computation methods. The second edition offers new and extended discussions on high- and low-contact ratio gears, lightly loaded gears, planetary and spli
Download or read book Proceedings of the 1994 International Gearing Conference written by J. N. Fawcett and published by . This book was released on 1994 with total page 566 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains reports to the International Gearing Conference 1994. Key note addresses covered an overview of a five-year research development and test programme, and thoughts on the philosophy of gear inspection.
Download or read book Computerized Generation and Simulation of Meshing of Modified Spur and Helical Gears Manufactured by Shaving written by and published by . This book was released on 2001 with total page 30 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modification of geometry of spur and helical gears with parallel axes and helical gears with crossed axes is proposed. The finishing process of gear generation is shaving. The purposes of modification of the gear geometry are to localize and stabilize the bearing contact, and to reduce noise and vibration. The goals mentioned above are achieved by using profile crowning and plunging the shaver by a prescribed motion during pinion generation. The pinion becomes double crowned. The gear member is generated as a conventional involute gear. A tooth contact analysis (TCA) program for simulation of meshing and contact was developed and the analysis is illustrated with TCA results for spur and helical gears.
Download or read book Handbook of Noise and Vibration Control written by Malcolm J. Crocker and published by John Wiley & Sons. This book was released on 2007-10-05 with total page 1594 pages. Available in PDF, EPUB and Kindle. Book excerpt: Two of the most acclaimed reference works in the area of acoustics in recent years have been our Encyclopedia of Acoustics, 4 Volume set and the Handbook of Acoustics spin-off. These works, edited by Malcolm Crocker, positioned Wiley as a major player in the acoustics reference market. With our recently published revision of Beranek & Ver's Noise and Vibration Control Engineering, Wiley is a highly respected name in the acoustics business. Crocker's new handbook covers an area of great importance to engineers and designers. Noise and vibration control is one largest areas of application of the acoustics topics covered in the successful encyclopedia and handbook. It is also an area that has been under-published in recent years. Crocker has positioned this reference to cover the gamut of topics while focusing more on the applications to industrial needs. In this way the book will become the best single source of need-to-know information for the professional markets.
Download or read book Dudley s Handbook of Practical Gear Design and Manufacture written by Stephen P. Radzevich and published by CRC Press. This book was released on 2016-09-15 with total page 1218 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dudley's Handbook of Practical Gear Design & Manufacture, Third Edition, is the definitive reference work for gear design, production, inspection, and application. This fully updated edition provides practical methods of gear design, and gear manufacturing methods, for high-, medium-, and low-volume production. Comprehensive tables and references are included in the text and in its extensive appendices, providing an invaluable source information for all those involved in the field of gear technology.
Download or read book Journal of Tribology written by and published by . This book was released on 2004 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Gear Geometry and Applied Theory written by Faydor L. Litvin and published by Cambridge University Press. This book was released on 2004-09-06 with total page 818 pages. Available in PDF, EPUB and Kindle. Book excerpt: This revised, expanded edition covers the theory, design, geometry, and manufacture of all types of gears and gear drives. An invaluable reference for designers, theoreticians, students, and manufacturers, the second edition includes advances in gear theory, gear manufacturing, and computer simulation. Among the new topics are: new geometry for gears and pumps; new design approaches for planetary gear trains and bevel gear drives; an enhanced approach for stress analysis; new methods of grinding and gear shaving; and new theory on the simulation and its application. First Edition published by Pearson Education Hb (1994): 0-132-11095-4
Download or read book 30th AIAA ASME SAE ASEE Joint Propulsion Conference written by and published by . This book was released on 1994 with total page 604 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Recent Advances in Intelligent Manufacturing written by Shilong Wang and published by Springer. This book was released on 2018-09-04 with total page 604 pages. Available in PDF, EPUB and Kindle. Book excerpt: The three-volume set CCIS 923, CCIS 924, and CCIS 925 constitutes the thoroughly refereed proceedings of the First International Conference on Intelligent Manufacturing and Internet of Things, and of the 5th International Conference on Intelligent Computing for Sustainable Energy and Environment, ICSEE 2018, held in Chongqing, China, in September 2018.The 135 revised full papers presented were carefully reviewed and selected from over 385 submissions.The papers of this volume are organized in topical sections on: digital manufacturing; industrial product design; logistics, production and operation management; manufacturing material; manufacturing optimization; manufacturing process; mechanical transmission system; robotics.
Download or read book High Conformal Gearing written by Stephen P. Radzevich and published by CRC Press. This book was released on 2016-01-05 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents a Concept That Makes Gear Transmissions Noiseless, Smaller, and Lighter in WeightHigh-conformal gearing is a new gear system inspired by the human skeleton. Unlike conventional external involute gearing, which features convex-to-convex contact, high-conformal gearing features a convex-to-concave type of contact between the tooth fla
Download or read book ASME Technical Papers written by and published by . This book was released on 1977 with total page 908 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Gears written by Vincenzo Vullo and published by Springer Nature. This book was released on 2020-02-14 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a compact history of gears, by summarizing the main stages of their development and the corresponding gradual acquisition of engineering expertise, from the antiquity to the Renaissance and the twentieth century. This brief history makes no claim to be exhaustive, since the topic is so extensive, complex and fascinating that it deserves an entire encyclopedia. Despite its brevity, the book debunks a number of popular misconceptions, such as the belief that the first literary description of a gear was supplied by Aristotle. It disproves not only this myth, but also other peremptory statements and/or axiomatic assumptions that have no basis in written documents, archaeological findings or other factual evidence. The book is chiefly intended for students and lecturers, historians of science and scientists, and all those who want to learn about the genesis and evolution of this topic.
