Download or read book A Design and Analysis of High Performance Voltage Controlled Oscillators written by Bin Wan and published by . This book was released on 2006 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design of High Performance CMOS Voltage Controlled Oscillators written by Liang Dai and published by Springer Science & Business Media. This book was released on 2003 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design of High-Performance CMOS Voltage-Controlled Oscillators presents a phase noise modeling framework for CMOS ring oscillators. The analysis considers both linear and nonlinear operation. It indicates that fast rail-to-rail switching has to be achieved to minimize phase noise. Additionally, in conventional design the flicker noise in the bias circuit can potentially dominate the phase noise at low offset frequencies. Therefore, for narrow bandwidth PLLs, noise up conversion for the bias circuits should be minimized. We define the effective Q factor (Qeff) for ring oscillators and predict its increase for CMOS processes with smaller feature sizes. Our phase noise analysis is validated via simulation and measurement results. The digital switching noise coupled through the power supply and substrate is usually the dominant source of clock jitter. Improving the supply and substrate noise immunity of a PLL is a challenging job in hostile environments such as a microprocessor chip where millions of digital gates are present.
Download or read book Design of High Performance CMOS Voltage Controlled Oscillators written by Liang Dai and published by Springer. This book was released on 2012-10-31 with total page 158 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design of High-Performance CMOS Voltage-Controlled Oscillators presents a phase noise modeling framework for CMOS ring oscillators. The analysis considers both linear and nonlinear operation. It indicates that fast rail-to-rail switching has to be achieved to minimize phase noise. Additionally, in conventional design the flicker noise in the bias circuit can potentially dominate the phase noise at low offset frequencies. Therefore, for narrow bandwidth PLLs, noise up conversion for the bias circuits should be minimized. We define the effective Q factor (Qeff) for ring oscillators and predict its increase for CMOS processes with smaller feature sizes. Our phase noise analysis is validated via simulation and measurement results. The digital switching noise coupled through the power supply and substrate is usually the dominant source of clock jitter. Improving the supply and substrate noise immunity of a PLL is a challenging job in hostile environments such as a microprocessor chip where millions of digital gates are present.
Download or read book Microelectronics Electromagnetics and Telecommunications written by Ganapati Panda and published by Springer. This book was released on 2018-11-02 with total page 802 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book discusses the latest developments and outlines future trends in the fields of microelectronics, electromagnetics and telecommunication. It contains original research works presented at the International Conference on Microelectronics, Electromagnetics and Telecommunication (ICMEET 2018), organised by GVP College of Engineering (A), Andhra Pradesh, India. The respective papers were written by scientists, research scholars and practitioners from leading universities, engineering colleges and R&D institutes from all over the world, and share the latest breakthroughs in and promising solutions to the most important issues facing today’s society.
Download or read book Design of High Performance CMOS Voltage Controlled Oscillators written by Liang Dai and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 170 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design of High-Performance CMOS Voltage-Controlled Oscillators presents a phase noise modeling framework for CMOS ring oscillators. The analysis considers both linear and nonlinear operation. It indicates that fast rail-to-rail switching has to be achieved to minimize phase noise. Additionally, in conventional design the flicker noise in the bias circuit can potentially dominate the phase noise at low offset frequencies. Therefore, for narrow bandwidth PLLs, noise up conversion for the bias circuits should be minimized. We define the effective Q factor (Qeff) for ring oscillators and predict its increase for CMOS processes with smaller feature sizes. Our phase noise analysis is validated via simulation and measurement results. The digital switching noise coupled through the power supply and substrate is usually the dominant source of clock jitter. Improving the supply and substrate noise immunity of a PLL is a challenging job in hostile environments such as a microprocessor chip where millions of digital gates are present.
Download or read book Voltage Controlled Ring Oscillators and Its Applications written by Suman Shruti and published by LAP Lambert Academic Publishing. This book was released on 2015-07-15 with total page 84 pages. Available in PDF, EPUB and Kindle. Book excerpt: A voltage controlled ring oscillator plays very important role in high speed systems due to its easy integration capability. The analysis of different VCOs and their applications are discussed and analyzed in this book. There are number of applications of ring VCOs, one of the most important application is phase locked loop. The main task of the PLL is to maintain the coherence between output signal and reference signal by phase comparison. The proposed PLL using improved performance voltage controlled ring oscillator shows better performance in terms of frequency range and power consumption.
Download or read book RF and Microwave Transistor Oscillator Design written by Andrei Grebennikov and published by John Wiley & Sons. This book was released on 2007-04-30 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: The increase of consumer electronics and communications applications using Radio Frequency (RF) and microwave circuits has implications for oscillator design. Applications working at higher frequencies and using novel technologies have led to a demand for more robust circuits with higher performance and functionality, but decreased costs, size and power consumption. As a result, there is also a need for more efficient oscillators. This book presents up to date information on all aspects of oscillator design, enabling a selection of the best oscillator topologies with optimized noise reduction and electrical performance. RF and Microwave Transistor Oscillator Design covers: analyses of non-linear circuit design methods including spectral-domain analysis, time-domain analysis and the quasilinear method; information on noise in oscillators including chapters on varactor and oscillator frequency tuning, CMOS voltage-controlled oscillators and wideband voltage-controlled oscillators; information on the stability of oscillations, with discussions on the stability of multi-resonant circuits and the phase plane method; optimized design and circuit techniques, beginning with the empirical and analytic design approaches, moving on to the high-efficiency design technique; general operation and design principles of oscillators, including a section on the historical aspects of oscillator configurations. A valuable reference for practising RF and Microwave designers and engineers, RF and Microwave Transistor Oscillator Design is also useful for lecturers, advanced students and research and design (R&D) personnel.
Download or read book Design and Performance Analysis of a Surface Acoustic Wave Voltage Controlled Oscillator written by Nicholas D. Lee and published by . This book was released on 1990 with total page 88 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design and Analysis of CMOS Voltage Controlled Oscillators for Industrial Use written by Liam Boyd and published by . This book was released on 2014 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Low Noise Low Power Design for Phase Locked Loops written by Feng Zhao and published by Springer. This book was released on 2014-11-25 with total page 106 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces low-noise and low-power design techniques for phase-locked loops and their building blocks. It summarizes the noise reduction techniques for fractional-N PLL design and introduces a novel capacitive-quadrature coupling technique for multi-phase signal generation. The capacitive-coupling technique has been validated through silicon implementation and can provide low phase-noise and accurate I-Q phase matching, with low power consumption from a super low supply voltage. Readers will be enabled to pick one of the most suitable QVCO circuit structures for their own designs, without additional effort to look for the optimal circuit structure and device parameters.
Download or read book LC tank CMOS Voltage controlled Oscillators Using High Quality Inductor Embedded in Advanced Packaging Technologies written by Sangwoong Yoon and published by . This book was released on 2004 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This dissertation focuses on high-performance LC-tank CMOS VCO design at 2 GHz. The high-Q inductors are realized using wiring metal lines in advanced packages. Those inductors are used in the resonator of the VCO to achieve low phase noise, low power consumption, and a wide frequency tuning range. In this dissertation, a fine-pitch ball-grid array (FBGA) package, a multichip module (MCM)-L package, and a wafer-level package (WLP) are incorporated to realize the high-Q inductor. The Q-factors of inductors embedded in packages are compared to those of inductors monolithically integrated on Si and GaAs substrates. All the inductors are modeled with a physical, simple, equivalent two-port model for the VCO design as well as for phase noise analysis. The losses in an LC-tank are analyzed from the phase noise perspective. For the implementation of VCOs, the effects of the interconnection between the embedded inductor and the VCO circuit are investigated. The VCO using the on-chip inductors is designed as a reference. The performance of VCOs using the embedded inductor in a FBGA and a WLP is compared with that of a VCO using the on-chip inductor. The VCO design is optimized from the high-Q perspective to enhance performance. Through this optimization, less phase noise, lower power consumption, and a wider frequency tuning range are obtained simultaneously.
Download or read book RF and Microwave Power Amplifier Design written by Andrei Grebennikov and published by McGraw Hill Professional. This book was released on 2004-09-15 with total page 433 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a rigorous tutorial on radio frequency and microwave power amplifier design, teaching the circuit design techniques that form the microelectronic backbones of modern wireless communications systems. Suitable for self-study, corporate training, or Senior/Graduate classroom use, the book combines analytical calculations and computer-aided design techniques to arm electronic engineers with every possible method to improve their designs and shorten their design time cycles.
Download or read book Low Power VCO Design in CMOS written by Marc Tiebout and published by Springer Science & Business Media. This book was released on 2006-01-25 with total page 126 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work covers the design of CMOS fully integrated low power low phase noise voltage controlled oscillators for telecommunication or datacommuni- tion systems. The need for low power is obvious, as mobile wireless telecommunications are battery operated. As wireless telecommunication systems use oscillators in frequency synthesizers for frequency translation, the selectivity and signal to noise ratio of receivers and transmitters depend heavily on the low phase noise performance of the implemented oscillators. Datacommunication s- tems need low jitter, the time-domain equivalent of low phase noise, clocks for data detection and recovery. The power consumption is less critical. The need for multi-band and multi-mode systems pushes the high-integration of telecommunication systems. This is o?ered by sub-micron CMOS feat- ing digital ?exibility. The recent crisis in telecommunication clearly shows that mobile hand-sets became mass-market high-volume consumer products, where low-cost is of prime importance. This need for low-cost products - livens tremendously research towards CMOS alternatives for the bipolar or BiCMOS solutions in use today.
Download or read book High Frequency Oscillator Design for Integrated Transceivers written by J. van der Tang and published by Springer Science & Business Media. This book was released on 2006-01-12 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text covers the analysis and design of all high-frequency oscillators required to realize integrated transceivers for wireless and wired applications. Starting with an in-depth review of basic oscillator theory, the authors provide a detailed analysis of many oscillator types and circuit topologies.
Download or read book Design and Analysis of CMOS Voltage Controlled Oscillator written by Gaurav Mital and published by . This book was released on 2005 with total page 120 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Oscillators and Oscillator Systems written by Jan R. Westra and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: In many electronic systems, such as telecommunication or measurement systems, oscillations play an essential role in the information processing. Each electronic system poses different requirements on these oscillations, depending on the type and performance level of that specific system. It is the designer's challenge to find the specifications for the desired oscillation and to implement an electronic circuit meeting these specifications. As the desired oscillations have to fulfill many requirements, the design process can become very complex. To find an optimal solution, the designer requires a design methodology that is preferably completely top-down oriented. To achieve such a methodology, it must be assured that each property of the system can be optimized independently of all other properties. Oscillators and Oscillator Systems: Classification, Analysis and Synthesis takes a systematic approach to the design of high-performance oscillators and oscillator systems. A fundamental classification of oscillators, based on their internal timing references, forms the basis of this approach. The classification enables the designer to make strategic design decisions at a high hierarchical level of the design process. Techniques, derived from the systematic approach, are supplied to the designer to enable him or her to bring the performance of the system as close as possible to the fundamental limits. Oscillators and Oscillator Systems: Classification, Analysis and Synthesis is an excellent reference for researchers and circuit designers, and may be used as a text for advanced courses on the topic.
Download or read book Proceedings of International Conference on Artificial Intelligence and Applications written by Poonam Bansal and published by Springer Nature. This book was released on 2020-07-01 with total page 604 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers high-quality papers presented at the International Conference on Artificial Intelligence and Applications (ICAIA 2020), held at Maharaja Surajmal Institute of Technology, New Delhi, India, on 6–7 February 2020. The book covers areas such as artificial neural networks, fuzzy systems, computational optimization technologies and machine learning.
