Download or read book A COST EFFECTIVE DESIGN FOR A NEUTRINO FACTORY written by and published by . This book was released on 1999 with total page 22 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Cost effective Design for a Neutrino Factory written by and published by . This book was released on 2006 with total page 11001 pages. Available in PDF, EPUB and Kindle. Book excerpt: There have been active efforts in the U.S., Europe, and Japan on the design of a neutrino factory. This type of facility produces intense beams of neutrinos from the decay of muons in a high-energy storage ring. In the U.S., a second detailed feasibility study (FS2) for a neutrino factory was completed in 2001. Since that report was published, new ideas in bunching, cooling, and acceleration of muon beams have been developed. We have incorporated these ideas into a new facility design, which we designate as study 2B (ST2B), that should lead to significant cost savings over the FS2 design.

Download or read book Muon Acceleration Concepts for Future Neutrino Factory written by and published by . This book was released on 2016 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Here, we summarize current state of concept for muon acceleration aimed at future Neutrino Factory. The main thrust of these studies was to reduce the overall cost while maintaining performance through exploring interplay between complexity of the cooling systems and the acceptance of the accelerator complex. To ensure adequate survival of the short-lived muons, acceleration must occur at high average gradient. The need for large transverse and longitudinal acceptances drives the design of the acceleration system to initially low RF frequency, e.g. 325 MHz, and then increased to 650 MHz, as the transverse size shrinks with increasing energy. High-gradient normal conducting RF cavities at these frequencies require extremely high peak-power RF sources. Hence superconducting RF (SRF) cavities are chosen. Here, we considered two cost effective schemes for accelerating muon beams for a stagable Neutrino Factory: Exploration of the so-called 'dual-use' linac concept, where the same linac structure is used for acceleration of both H- and muons and alternatively, the SRF efficient design based on multi-pass (4.5) 'dogbone' RLA, extendable to multi-pass FFAG-like arcs.

Download or read book The Proceedings of New Initiatives on Lepton Flavor Violation and Neutrino Oscillation with High Intense Muon and Neutrino Sources written by Yoshitaka Kuno and published by World Scientific. This book was released on 2002 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: The area of physics involving muons and neutrinos has become exciting in particle physics. Using their high intensity sources, physicists undertake, in various ways, extensive searches for new physics beyond the Standard Model, such as tests of supersymmetric grand unification (SUSY-GUT) and precision measurements of the muon and neutrino properties, which will in future extend to ambitious studies such as determination of the three-generation neutrino mixing matrix elements and CP violation in the lepton sector. The physics of this field is advancing, with potential improvements of the sources. Many R&D projects, such as those concerning high intensity, low energy muon sources or a neutrino factory, are being carried out or planned at various places. Some of those topics are included in this book. Contents: Muon Applied Science: Status at the End of the 20th Century (K Nagamine); Lepton Flavor Violation and Supersymmetric Models with Right-Handed Neutrino (D Nomura); Neutrino Oscillation Scenarios and GUT Model Predictions (C Albright); The MECO Experiment (J Sculli); CP Violation and Atmospheric Neutrinos (I Stancu et al.); Neutrino Oscillations with Four Generations (O Yasuda); Ambiguities of Theoretical Parameters and CP/T Violation in Neutrino Factories (M Koike et al.); Testing Neutrino Properties at Long Baseline Experiments and Neutrino Factories (S Pakvasa); Next Generation Water Cherenkov Detector at Kamioka (K Nakamura); and other papers. Readership: High energy physicists.

Download or read book Neutrino Factory and Muon Collider Fellow Final Technical Report for DOE Award DE FG02 03ER41267 written by and published by . This book was released on 2006 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: By providing an intense, well controlled, well characterized, narrow beam of muon neutrinos (?????????s) and electron antineutrinos (–?e’s) from the decay of muons (?−??2019?s) in a storage ring, a neutrino factory can advance neutrino physics beyond the current round of approved and proposed experiments using conventional neutrino beams produced from a beam of decaying pions and kaons [1, 2]. There is no other comparable single clean source of electron neutrinos (from the decay of ?+’s) or antineutrinos. A muon storage ring producing 1019 to 1021 muon decays per year should be feasible. These intense neutrino beams can be used to study neutrino oscillations and possible CP violation. An entry-level muon storage ring that could provide 1019 decays per year would allow a determination of the sign of ?m231and a first measurement of sin22?13 for favorable values of this parameter. An improved muon storage ring system that could provide 1020 muon decays per year would allow measurement of sin22?13 to 1̃0−4. A high performance muon storage ring capable of providing more than 1020 muon decays per year would allow the exciting possibility of a measurement of CP violation in the leptonic sector. An intense cold muon beam at the front end of a neutrino factory could enable a rich variety of precision muon physics, such as a more precise measurement of the muon anomalous magnetic moment (g – 2) and searches for ? -> e ? and ?−N -> e− N conversion [3]. In addition, colliding beams of ?+ and ?− in a muon collider can provide an effective ?Higgs factory? or multi-TeV center-of-mass energy collisions [4]. A muon collider will be the best way to study the Higgs bosons associated with supersymmetric theories and may be necessary to discover them. Two neutrino factory feasibility studies have been carried out in the U.S. [5, 6]. International design efforts are now under way. The International Neutrino Factory and Superbeam Scoping Study (ISS) [7] began at the NuFact05 Workshop in June 2005 with the goals of elaborating the physics case, defining the baseline options for such a facility and its neutrino detectors, and identifying the required R&D program to lay the foundations for a complete design study proposal, and an International Design Study of the Neutrino Factory is beginning. These studies entail iterative cost and technical difficulty evaluations, thereby providing guidelines for the advancing R&D program. One of the central subsystems of a neutrino factory or muon collider is the muon cooling system. The muon beam is cooled to increase the phase space density and allow the muons to pass through smaller apertures, thus reducing the cost of the following accelerator systems. This cooling is accomplished through ionization cooling, in which the beam is passed through liquid hydrogen absorbers and then accelerated in RF cavities to restore the longitudinal momentum. Ionization cooling was proposed more than twenty years ago [8] but has not yet been demonstrated in practice. The International Muon Ionization Cooling Experiment (MICE) [9, 10] seeks to build and operate a muon-cooling device of a design proposed in Feasibility Study-II [6]. In addition to cooling the muons, MICE includes apparatus to measure the performance of the device. The experiment will be carried out by a collaboration of physicists from the U.S., Europe, and Japan at the Rutherford Appleton Laboratory in the U.K. MICE will begin operation in late 2007. Successful performance of the MICE experiment will provide the understanding needed to design a complete neutrino factory, in which the muons are cooled, accelerated, circulated in a storage ring, and decay to produce the neutrino beam. The first neutrino factory might be built in the U.S., Europe, or Japan. A Muon Collider Task Force (MCTF) has recently been organized at Fermilab.

Download or read book Nonaccelerator Astroparticle Physics Proceedings Of The Sixth School written by Richard A Carrigan Jr and published by World Scientific. This book was released on 2002-06-27 with total page 369 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume provides timely coverage of nonaccelerator astroparticle physics. It complements two volumes prepared for earlier schools. Informative and pedagogical, it can serve as the basis for a modern course on the subject.The first section discusses the fundamentals of particle physics, with reviews of the standard model and beyond. The section on neutrinos and neutrino oscillations covers topics including neutrino oscillations, short and long baseline neutrino beams from accelerators, atmospheric and solar neutrinos, neutrinos from gravitational stellar collapses and neutrino telescopes. Another section deals with dark matter searches. Cosmic rays and astrophysics are covered with reviews of experiments in space, extreme energy cosmic rays, and gamma ray bursts. Gravitational waves and gravitational wave detectors are discussed. The final section deals with results from accelerators and future plans for accelerator facilities, computing, and new large and small detectors. Abstracts of the posters presented by participants at the school give a broad picture of world-wide activities in the field.

Download or read book Neutrino Factories Superbeams and Betabeams written by Osamu Yasuda and published by American Institute of Physics. This book was released on 2008-02-28 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: The workshop has reviewed progress towards the future generation of neutrino oscillation experiments. These experiments will use very intense conventional neutrino beams and novel beams derived from muons or radioactive nuclei. These new facilities will provide a broad research front including muon physics and neutrino scattering experiments. The main technical challenges involve construction of very intense proton beams, targeting, effective capture of produced particles, cooling and ultra-fast acceleration of the resulting muons.

Download or read book Accelerator Physics Example Problems With Solutions written by Mario Conte and published by World Scientific Publishing Company. This book was released on 2012-03-23 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: This manual provides solutions to the problems given in the second edition of the textbook entitled An Introduction to the Physics of Particle Accelerators. Simple-to-solve problems play a useful role as a first check of the student's level of knowledge whereas difficult problems will test the student's capacity of finding the bearing of the problems in an interdisciplinary environment. The solutions to several problems will require strong engagement of the student, not only in accelerator physics but also in more general physical subjects, such as the profound approach to classical mechanics (discussed in Chapter 3) and the subtleties of spin dynamics (Chapter 13).

Download or read book Evolutionary Algorithm for the Neutrino Factory Front End Design written by and published by . This book was released on 2009 with total page 15 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Neutrino Factory is an important tool in the long-term neutrino physics program. Substantial effort is put internationally into designing this facility in order to achieve desired performance within the allotted budget. This accelerator is a secondary beam machine: neutrinos are produced by means of the decay of muons. Muons, in turn, are produced by the decay of pions, produced by hitting the target by a beam of accelerated protons suitable for acceleration. Due to the physics of this process, extra conditioning of the pion beam coming from the target is needed in order to effectively perform subsequent acceleration. The subsystem of the Neutrino Factory that performs this conditioning is called Front End, its main performance characteristic is the number of the produced muons.

Download or read book ECFA CERN Studies of a European Neutrino Factory Complex written by Alain Blondel and published by . This book was released on 2004 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The 2nd International Workshop on Neutrino Oscillations and Their Origin written by Y. Suzuki and published by World Scientific. This book was released on 2001 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contains many discussions on phenomenology and theories about neutrino mass and oscillations.

Download or read book Proceedings of the Sixth School on Non Accelerator Astropartical Physics written by R. A. Carrigan and published by World Scientific. This book was released on 2002 with total page 369 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume provides timely coverage of nonaccelerator astroparticle physics. It complements two volumes prepared for earlier schools. Informative and pedagogical, it can serve as the basis for a modern course on the subject.The first section discusses the fundamentals of particle physics, with reviews of the standard model and beyond. The section on neutrinos and neutrino oscillations covers topics including neutrino oscillations, short and long baseline neutrino beams from accelerators, atmospheric and solar neutrinos, neutrinos from gravitational stellar collapses and neutrino telescopes. Another section deals with dark matter searches. Cosmic rays and astrophysics are covered with reviews of experiments in space, extreme energy cosmic rays, and gamma ray bursts. Gravitational waves and gravitational wave detectors are discussed. The final section deals with results from accelerators and future plans for accelerator facilities, computing, and new large and small detectors. Abstracts of the posters presented by participants at the school give a broad picture of world-wide activities in the field.

Download or read book Interim Design Report for the International Design Study for a Neutrino Factory written by and published by . This book was released on 2011 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: The starting point for the International Design Study for the Neutrino Factory (the IDS-NF) was the output of the earlier International Scoping Study for a future Neutrino Factory and super-beam facility (the ISS). The accelerator facility described in section 2 incorporates the improvements that have been derived from the substantial amount of work carried out within the Accelerator Working Group. Highlights of these improvements include: (1) Initial concepts for the implementation of the proton driver at each of the three example sites, CERN, FNAL, and RAL; (2) Detailed studies of the energy deposition in the target area; (3) A reduction in the length of the muon beam phase-rotation and bunching systems; (4) Detailed analyses of the impact of the risk that stray magnetic field in the accelerating cavities in the ionization cooling channel will reduce the maximum operating gradient. Several alternative ionization-cooling lattices have been developed as fallback options to mitigate this technical risk; (5) Studies of particle loss in the muon front-end and the development of strategies to mitigate the deleterious effects of such losses; (6) The development of more complete designs for the muon linac and re-circulating linacs; (7) The development of a design for the muon FFAG that incorporates insertions for injection and extraction; and (8) Detailed studies of diagnostics in the decay ring. Other sub-systems have undergone a more 'incremental' evolution; an indication that the design of the Neutrino Factory has achieved a degree of maturity. The design of the neutrino detectors described in section 3 has been optimized and the Detector Working Group has made substantial improvements to the simulation and analysis of the Magnetized Iron Neutrino Detector (MIND) resulting in an improvement in the overall neutrino-detection efficiency and a reduction in the neutrino-energy threshold. In addition, initial consideration of the engineering of the MIND has generated a design that is feasible and a finite element analysis of the toroidal magnetic field to produce a realistic field map has been carried out. Section 3 also contains, for the first time, a specification for the near-detector systems and a demonstration that the neutrino flux can be determined with a precision of 1% through measurements of inverse muon decay at the near detector. The performance of the facility, the work of the Physics and Performance Evaluation Group, is described in section 1. The effect of the improved MIND performance is to deliver a discovery reach for CP-invariance violation in the lepton sector, the determination of the mass hierarchy, and of?13 that extends down to values of sin2 2?13 H"5 x 10−5 and is robust against systematic uncertainties. In addition, the improved neutrino-energy threshold has allowed an indicative analysis of the kind of re-optimization of the facility that could be carried out should?13 be found close to the current upper bound. The results presented in section 1 demonstrate that the discovery reach as well as the precision with which the oscillation parameters can be measured at the baseline Neutrino Factory is superior to that of other proposed facilities for all possible values of sin2 2?13.

Download or read book Progress on the Neutrino Factory Target System Design written by and published by . This book was released on 2012 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book International Design Study for the Neutrino Factory written by Science and Technology Facilities Council (Great Britain) and published by . This book was released on 2011 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Low energy Neutrino Factory Design written by and published by . This book was released on 2009 with total page 14 pages. Available in PDF, EPUB and Kindle. Book excerpt: The design of a low-energy (4 GeV) neutrino factory (NF) is described, along with its expected performance. The neutrino factory uses a high-energy proton beam to produce charged pions. The?{sup {+-}} decay to produce muons (?{sup {+-}}), which are collected, accelerated, and stored in a ring with long straight sections. Muons decaying in the straight sections produce neutrino beams. The scheme is based on previous designs for higher energy neutrino factories, but has an improved bunching and phase rotation system, and new acceleration, storage ring, and detector schemes tailored to the needs of the lower energy facility. Our simulations suggest that the NF scheme we describe can produce neutrino beams generated by ≈ 1.4 x 1021? per year decaying in a long straight section of the storage ring, and a similar number of?− decays.

Download or read book Proceedings of the Workshop on Applications of High Intensity Proton Accelerators Fermilab Chicago 19 21 October 2009 written by Rajendran Raja and published by World Scientific. This book was released on 2010 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: Superconducting radiofrequency linac development at Fermilab / S.D. Holmes -- Rare muon decay experiments / Y. Kuno -- Rare kaon decays / D. Bryman -- Muon collider / R.B. Palmer -- Neutrino factories / S. Geer -- ADS and its potential / J.-P. Revol -- ADS history in the USA / R.L. Sheffield and E.J. Pitcher -- Accelerator driven transmutation of waste : high power accelerator for the European ADS demonstrator / J.L. Biarrotte and T. Junquera -- Myrrha, technology development for the realisation of ADS in EU : current status & prospects for realisation / R. Fernandez [und weitere] -- High intensity proton beam production with cyclotrons / J. Grillenberger and M. Seidel -- FFAG for high intensity proton accelerator / Y. Mori -- Kaon yields for 2 to 8 GeV proton beams / K.K. Gudima, N.V. Mokhov and S.I. Striganov -- Pion yield studies for proton driver beams of 2-8 GeV kinetic energy for stopped muon and low-energy muon decay experiments / S.I. Striganov -- J-Parc accelerator status and future plans / H. Kobayashi -- Simulation and verification of DPA in materials / N.V. Mokhov, I.L. Rakhno and S.I. Striganov -- Performance and operational experience of the CNGS facility / E. Gschwendtner -- Particle physics enabled with super-conducting RF technology - summary of working group 1 / D. Jaffe and R. Tschirhart -- Proton beam requirements for a neutrino factory and muon collider / M.S. Zisman -- Proton bunching options / R.B. Palmer -- CW SRF H linac as a proton driver for muon colliders and neutrino factories / M. Popovic, C.M. Ankenbrandt and R.P. Johnson -- Rapid cycling synchrotron option for Project X / W. Chou -- Linac-based proton driver for a neutrino factory / R. Garoby [und weitere] -- Pion production for neutrino factories and muon colliders / N.V. Mokhov [und weitere] -- Proton bunch compression strategies / V. Lebedev -- Accelerator test facility for muon collider and neutrino factory R & D / V. Shiltsev -- The superconducting RF linac for muon collider and neutrino factory - summary of working group 2 / J. Galambos, R. Garoby and S. Geer -- Prospects for a very high power CW SRF linac / R.A. Rimmer -- Indian accelerator program for ADS applications / V.C. Sahni and P. Singh -- Ion accelerator activities at VECC (particularly, operating at low temperature) / R.K. Bhandari -- Chinese efforts in high intensity proton accelerators / S. Fu, J. Wang and S. Fang -- ADSR activity in the UK / R.J. Barlow -- ADS development in Japan / K. Kikuchi -- Project-X, SRF, and very large power stations / C.M. Ankenbrandt, R.P. Johnson and M. Popovic -- Power production and ADS / R. Raja -- Experimental neutron source facility based on accelerator driven system / Y. Gohar -- Transmutation mission / W.S. Yang -- Safety performance and issues / J.E. Cahalan -- Spallation target design for accelerator-driven systems / Y. Gohar -- Design considerations for accelerator transmutation of waste system / W.S. Yang -- Japan ADS program / T. Sasa -- Overview of members states' and IAEA activities in the field of Accelerator Driven Systems (ADS) / A. Stanculescu -- Linac for ADS applications - accelerator technologies / R.W. Garnett and R.L. Sheffield -- SRF linacs and accelerator driven sub-critical systems - summary working groups 3 & 4 / J. Delayen -- Production of Actinium-225 via high energy proton induced spallation of Thorium-232 / J. Harvey [und weitere] -- Search for the electric dipole moment of Radium-225 / R.J. Holt, Z.-T. Lu and R. Mueller -- SRF linac and material science and medicine - summary of working group 5 / J. Nolen, E. Pitcher and H. Kirk