Download or read book Masters Theses in the Pure and Applied Sciences written by Wade H. Shafer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: Masters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS) * at Purdue University in 1 957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all con cerned if the printing and distribution of the volumes were handled by an interna tional publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Cor poration of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 28 (thesis year 1 983) a total of 10,661 theses titles from 26 Canadian and 197 United States universities. We are sure that this broader base for these titles reported will greatly enhance the value of this important annual reference work. While Volume 28 reports theses submitted in-1983, on occasion, certain univer sities do report theses submitted in previous years but not reported at the time.
Download or read book A Control volume Finite element Method for Three dimensional Parabolic Flow and Heat Transfer in Ducts with Application to Laminar Thermal hydraulics in Rod bundle Geometries written by Trung-Tri Pham and published by . This book was released on 1983 with total page 680 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Numerical Heat Transfer written by W. J. Minkowycz and published by Wiley-Interscience. This book was released on 1988-03-28 with total page 1222 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents a comprehensive, accessible and readily usable reference to the necessary formulations, numerical schemes, and innovative solution techniques for solving problems of heat and mass transfer and related fluid flows. Grouped by major sets of methods and functions, the text describes new or improved, as well as standard, procedures. This collection of contributions from leading figures in the field covers parabolic systems, hyperbolic systems, integral and integro-differential systems, Monte Carlo and perturbation methods, inverse problems and more.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1978 with total page 1008 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lists citations with abstracts for aerospace related reports obtained from world wide sources and announces documents that have recently been entered into the NASA Scientific and Technical Information Database.
Download or read book Laminar Flow Forced Convection in Ducts written by R. K. Shah and published by Academic Press. This book was released on 2014-06-28 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laminar Flow Forced Convection in Ducts is a sourcebook for compact heat exchanger analytical data. This book describes the analytical solutions for laminar fluid flow and forced convection heat transfer in circular and noncircular pipes, including applicable differential equations and boundary conditions involving velocity and temperature problems of fluid flow. The book also discusses fluid flow—how much power is required to pump fluids through the heat exchanger, as well as the heat transfer—the determination of q" distribution, and the temperature of fluid and walls. The text also analyzes the coolant or heat transfer fluid flows in a nuclear power reactor composed of a bundle of circular section fuel rods located inside a round tube. R.A. Axford addresses fluid flow and heat transfers results for the rod bundle geometry in "Heat Transfer in Rod Bundles." The book also provides an overview and guidelines that can be used for the designer and the applied mathematician. This book is suitable for engineers working in electronics, aerospace, instrumentation, and biomechanics that use cooling or heating exchanges or solar collection systems.
Download or read book Physics Briefs written by and published by . This book was released on 1982 with total page 1130 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Physical and Computational Aspects of Convective Heat Transfer written by T. Cebeci and published by Springer Science & Business Media. This book was released on 2013-04-18 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is concerned with the transport of thermal energy in flows of practical significance. The temperature distributions which result from convective heat transfer, in contrast to those associated with radiation heat transfer and conduction in solids, are related to velocity characteristics and we have included sufficient information of momentum transfer to make the book self-contained. This is readily achieved because of the close relation ship between the equations which represent conservation of momentum and energy: it is very desirable since convective heat transfer involves flows with large temperature differences, where the equations are coupled through an equation of state, as well as flows with small temperature differences where the energy equation is dependent on the momentum equation but the momentum equation is assumed independent of the energy equation. The equations which represent the conservation of scalar properties, including thermal energy, species concentration and particle number density can be identical in form and solutions obtained in terms of one dependent variable can represent those of another. Thus, although the discussion and arguments of this book are expressed in terms of heat transfer, they are relevant to problems of mass and particle transport. Care is required, however, in making use of these analogies since, for example, identical boundary conditions are not usually achieved in practice and mass transfer can involve more than one dependent variable.
Download or read book Rules of Thumb for Mechanical Engineers written by J. Edward Pope and published by Gulf Professional Publishing. This book was released on 1997 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fluids -- Heat transfer -- Thermodynamics -- Mechanical seals -- Pumps and compressors -- Drivers -- Gears -- Bearings -- Piping and pressure vessels -- Tribology -- Vibration -- Materials -- Stress and strain -- Fatigue -- Instrumentation -- Engineering economics.
Download or read book Computational Fluid Dynamics and Heat Transfer written by Ryoichi Amano and published by WIT Press. This book was released on 2011 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heat transfer and fluid flow issues are of great significance and this state-of-the-art edited book with reference to new and innovative numerical methods will make a contribution for researchers in academia and research organizations, as well as industrial scientists and college students. The book provides comprehensive chapters on research and developments in emerging topics in computational methods, e.g., the finite volume method, finite element method as well as turbulent flow computational methods. Fundamentals of the numerical methods, comparison of various higher-order schemes for convection-diffusion terms, turbulence modeling, the pressure-velocity coupling, mesh generation and the handling of arbitrary geometries are presented. Results from engineering applications are provided. Chapters have been co-authored by eminent researchers.
Download or read book Fundamentals of Heat Exchanger Design written by Ramesh K. Shah and published by John Wiley & Sons. This book was released on 2003-08-11 with total page 978 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive and unique source integrates the material usually distributed among a half a dozen sources. * Presents a unified approach to modeling of new designs and develops the skills for complex engineering analysis. * Provides industrial insight to the applications of the basic theory developed.
Download or read book Nuclear Systems written by Neil E. Todreas and published by CRC Press. This book was released on 2012 with total page 1037 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nuclear power is in the midst of a generational change—with new reactor designs, plant subsystems, fuel concepts, and other information that must be explained and explored—and after the 2011 Japan disaster, nuclear reactor technologies are, of course, front and center in the public eye. Written by leading experts from MIT, Nuclear Systems Volume I: Thermal Hydraulic Fundamentals, Second Edition provides an in-depth introduction to nuclear power, with a focus on thermal hydraulic design and analysis of the nuclear core. A close examination of new developments in nuclear systems, this book will help readers—particularly students—to develop the knowledge and design skills required to improve the next generation of nuclear reactors. Includes a CD-ROM with Extensive Tables for Computation Intended for experts and senior undergraduate/early-stage graduate students, the material addresses: Different types of reactors Core and plant performance measures Fission energy generation and deposition Conservation equations Thermodynamics Fluid flow Heat transfer Imparting a wealth of knowledge, including their longtime experience with the safety aspects of nuclear installations, authors Todreas and Kazimi stress the integration of fluid flow and heat transfer, various reactor types, and energy source distribution. They cover recent nuclear reactor concepts and systems, including Generation III+ and IV reactors, as well as new power cycles. The book features new chapter problems and examples using concept parameters, and a solutions manual is available with qualifying course adoption.
Download or read book Nuclear Systems Volume I written by Neil E. Todreas and published by CRC Press. This book was released on 2021-01-11 with total page 927 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offers rigorous coverage of nuclear power generation fundamentals. Provides description and analysis of the latest nuclear power plant designs and technologies. Includes extensive examples in each chapter to illustrate the analysis methods, which are also presented. Includes program code to demonstrate computer analysis of nuclear power generation. Provides an integration of fluid flow and heat transfer, as applied to single- and two-phase coolants.
Download or read book Handbook of Hydraulic Resistance written by I. E. Idelchik and published by . This book was released on 2005 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The handbook has been composed on the basis of processing, systematization and classification of the results of a great number of investigations published at different time. The essential part of the book is the outcome of investigations carried out by the author. The present edition of this handbook should assist in increasing the quality and efficiency of the design and usage of indutrial power engineering and other constructions and also of the devices and apparatus through which liquids and gases move.
Download or read book Fox and McDonald s Introduction to Fluid Mechanics written by Robert W. Fox and published by John Wiley & Sons. This book was released on 2020-06-30 with total page 610 pages. Available in PDF, EPUB and Kindle. Book excerpt: Through ten editions, Fox and McDonald's Introduction to Fluid Mechanics has helped students understand the physical concepts, basic principles, and analysis methods of fluid mechanics. This market-leading textbook provides a balanced, systematic approach to mastering critical concepts with the proven Fox-McDonald solution methodology. In-depth yet accessible chapters present governing equations, clearly state assumptions, and relate mathematical results to corresponding physical behavior. Emphasis is placed on the use of control volumes to support a practical, theoretically-inclusive problem-solving approach to the subject. Each comprehensive chapter includes numerous, easy-to-follow examples that illustrate good solution technique and explain challenging points. A broad range of carefully selected topics describe how to apply the governing equations to various problems, and explain physical concepts to enable students to model real-world fluid flow situations. Topics include flow measurement, dimensional analysis and similitude, flow in pipes, ducts, and open channels, fluid machinery, and more. To enhance student learning, the book incorporates numerous pedagogical features including chapter summaries and learning objectives, end-of-chapter problems, useful equations, and design and open-ended problems that encourage students to apply fluid mechanics principles to the design of devices and systems.
Download or read book Introduction to Computational Fluid Dynamics written by Anil W. Date and published by Cambridge University Press. This book was released on 2005-08-08 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Computational Fluid Dynamics is a textbook for advanced undergraduate and first year graduate students in mechanical, aerospace and chemical engineering. The book emphasizes understanding CFD through physical principles and examples. The author follows a consistent philosophy of control volume formulation of the fundamental laws of fluid motion and energy transfer, and introduces a novel notion of 'smoothing pressure correction' for solution of flow equations on collocated grids within the framework of the well-known SIMPLE algorithm. The subject matter is developed by considering pure conduction/diffusion, convective transport in 2-dimensional boundary layers and in fully elliptic flow situations and phase-change problems in succession. The book includes chapters on discretization of equations for transport of mass, momentum and energy on Cartesian, structured curvilinear and unstructured meshes, solution of discretised equations, numerical grid generation and convergence enhancement. Practising engineers will find this particularly useful for reference and for continuing education.
Download or read book Handbook of Heat Transfer written by Warren M. Rohsenow and published by McGraw-Hill Companies. This book was released on 1973 with total page 1552 pages. Available in PDF, EPUB and Kindle. Book excerpt:
