Download or read book A Complete Multi body Model for an FSAE Space Frame Car written by Tejas N. Chothani and published by . This book was released on 2013 with total page 98 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vehicle dynamics has evolved into an increasingly indispensible discipline to supplement the design of automobiles, especially racecars. Every single component of the car and the environment with which it interacts contributes to the overall dynamic behavior of the vehicle. For Formula Society of Automotive Engineers (FSAE) cars in particular, these parameters become extremely critical and hence require robust and accurate physical testing methods, which are expensive and time consuming, warranting the need for virtual testing methods. The Bearcat Motorsports team (BCMS) lacked this capability of predicting vehicle dynamic behavior, relying on previously available test data and the performance of the car after fabrication. Hence, a thorough multi-body dynamics model has been developed to overcome this inadequacy. The 2013 race car is used for this study and ADAMS/Car is used as a multi-body development platform. ADAMS/Car multi-body model consists of different automotive subassemblies modeled as independent subsystems, which can interact amongst themselves to mimic the overall dynamics of a physical car model. Each subsystem requires data pertaining to its characteristics such as mass, inertia, center of gravity, which can be tuned to calibrate and eventually validate the model against data obtained from physical testing. This makes it imperative to bring together the work done by all sub-system teams over the course of the year. For simulation of road-tire interface, the PAC2002 tire model [2] is used, which is the latest Pacejka Tire Model. A new ADAMS template is made for the anti-roll bars and the strut structure. The model can predict full vehicle dynamic behavior apart from generating sub-system specific vehicle dynamic parameters. The validation of a full vehicle model is a multi-year project and is not within the scope of this thesis. However, the initial dynamic model is now able to help the team predict vehicle dynamic trends and evolve their designs based on previous design ideologies. The future work for this project will include further calibration and validation of the model and then running the simulation model on a complete virtual endurance track.
Download or read book The Science of Vehicle Dynamics written by Massimo Guiggiani and published by Springer. This book was released on 2018-05-05 with total page 565 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook covers handling and performance of both road and race cars. Mathematical models of vehicles are developed always paying attention to state the relevant assumptions and to provide explanations for each step. This innovative approach provides a deep, yet simple, analysis of the dynamics of vehicles. The reader will soon achieve a clear understanding of the subject, which will be of great help both in dealing with the challenges of designing and testing new vehicles and in tackling new research topics. The book deals with several relevant topics in vehicle dynamics that are not discussed elsewhere and this new edition includes thoroughly revised chapters, with new developments, and many worked exercises. Praise for the previous edition: Great book! It has changed drastically our approach on many topics. We are now using part of its theory on a daily basis to constantly improve ride and handling performances. --- Antonino Pizzuto, Head of Chassis Development Group at Hyundai Motor Europe Technical Center Astonishingly good! Everything is described in a very compelling and complete way. Some parts use a different approach than other books. --- Andrea Quintarelli, Automotive Engineer
Download or read book Build Your Own Sports Car for as Little as 250 and Race It written by Ron Champion and published by Haynes Publishing. This book was released on 2000 with total page 191 pages. Available in PDF, EPUB and Kindle. Book excerpt: Build a roadworthy two-seater open sports car for a fraction of the cost of a kit car! Using standard tools, basic skills and low-cost materials, this volume shows you how to make the chassis, suspension and bodywork, and advises you on how to modify and use inexpensive but serviceable mechanical components. Contains sections on improving handling, information on how to get through the Single Vehicle Approval test, and builders' own stories.
Download or read book Chassis Engineering written by Herb Adams and published by Penguin. This book was released on 1992-11-19 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt: In most forms of racing, cornering speed is the key to winning. On the street, precise and predictable handling is the key to high performance driving. However, the art and science of engineering a chassis can be difficult to comprehend, let alone apply. Chassis Engineering explains the complex principles of suspension geometry and chassis design in terms the novice can easily understand and apply to any project. Hundreds of photos and illustrations illustrate what it takes to design, build, and tune the ultimate chassis for maximum cornering power on and off the track.
Download or read book Automotive Steels written by Radhakanta Rana and published by Woodhead Publishing. This book was released on 2016-11-26 with total page 481 pages. Available in PDF, EPUB and Kindle. Book excerpt: Automotive Steels: Design, Metallurgy, Processing and Applications explores the design, processing, metallurgy, and applications of automotive steels. While some sheet steels are produced routinely in high volume today, there have been significant advances in the use of steel in the automotive industry. This book presents these metallurgical and application aspects in a way that is not available in the current literature. The editors have assembled an international team of experts who discuss recent developments and future prospects for automotive steels, compiling essential reading for both academic and industrial metallurgists, automotive design engineers, and postgraduate students attending courses on the metallurgy of automotive materials. - Presents recent developments on the design, metallurgy, processing, and applications of automotive steels - Discusses automotive steels that are currently in the early stages of research, such as low-density and high modulus steels that are driving future development - Covers traditional steels, advanced high strength steels, elevated Mn steels and ferrous composite materials
Download or read book Proceedings of the 6th International Conference and Exhibition on Sustainable Energy and Advanced Materials written by Ubaidillah Sabino and published by Springer Nature. This book was released on 2020-06-01 with total page 813 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers the proceedings of the 6th International Conference and Exhibition on Sustainable Energy and Advanced Materials (ICE-SEAM 2019), held on 16–17 October 2019 in Surakarta, Indonesia. It focuses on two relatively broad areas – advanced materials and sustainable energy – and a diverse range of subtopics: Advanced Materials and Related Technologies: Liquid Crystals, Semiconductors, Superconductors, Optics, Lasers, Sensors, Mesoporous Materials, Nanomaterials, Smart Ferrous Materials, Amorphous Materials, Crystalline Materials, Biomaterials, Metamaterials, Composites, Polymers, Design, Analysis, Development, Manufacturing, Processing and Testing for Advanced Materials. Sustainable Energy and Related Technologies: Energy Management, Storage, Conservation, Industrial Energy Efficiency, Energy-Efficient Buildings, Energy-Efficient Traffic Systems, Energy Distribution, Energy Modeling, Hybrid and Integrated Energy Systems, Fossil Energy, Nuclear Energy, Bioenergy, Biogas, Biomass Geothermal Power, Non-Fossil Energies, Wind Energy, Hydropower, Solar Photovoltaic, Fuel Cells, Electrification, and Electrical Power Systems and Controls.
Download or read book Racing and Sports Car Chassis Design written by David Phipps and published by . This book was released on 1974 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Racecar written by Matt Brown and published by Matt Brown. This book was released on 2011 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: In 2006, a small unavailing university auto racing team began building a racecar that would challenge the best engineering schools in the world. With fewer people and resources than any of the top competitors, the only way they were going to win was to push the limit, go for broke, and hope for more than a little luck. By the time they got to the racetrack, they knew: In the fog of fierce competition, whether you win or lose, you learn the hardest lessons about engineering, teamwork, friendship, and yourself.
Download or read book Automotive Chassis Engineering written by David C Barton and published by Springer. This book was released on 2018-03-15 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written for students and practicing engineers working in automotive engineering, this book provides a fundamental yet comprehensive understanding of chassis systems and requires little prior knowledge on the part of the reader. It presents the material in a practical and realistic manner, using reverse engineering as a basis for examples to reinforce understanding of the topics. The specifications and characteristics of vehicles currently on the market are used to exemplify the theory’s application, and care is taken to connect the various topics covered, so as to clearly demonstrate their interrelationships. The book opens with a chapter on basic vehicle mechanics, which include the forces acting on a vehicle in motion, assuming a rigid body. It then proceeds to a chapter on steering systems, which provides readers with a firm understanding of the principles and forces involved under static and dynamic loading. The next chapter focuses on vehicle dynamics by considering suspension systems—tyres, linkages, springs, dampers etc. The chapter on chassis structures and materials includes analysis tools (typically, finite element analysis) and design features that are used to reduce mass and increase occupant safety in modern vehicles. The final chapter on Noise, Vibration and Harshness (NVH) includes a basic overview of acoustic and vibration theory and makes use of extensive research investigations and practical experience as a means of addressing NVH issues. In all subject areas the authors take into account the latest trends, anticipating the move towards electric vehicles, on-board diagnostic monitoring, active systems and performance optimisation. The book features a number of worked examples and case studies based on recent research projects. All students, including those on Master’s level degree courses in Automotive Engineering, and professionals in industry who want to gain a better understanding of vehicle chassis engineering, will benefit from this book.
Download or read book Proceedings of the 8th Biennial Conference on Engineering Systems Design and Analysis 2006 Dynamic systems and controls Symposium on design and analysis of advanced structures Tribology written by and published by . This book was released on 2006 with total page 1040 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Chassis Design written by William F. Milliken and published by Wiley-Blackwell. This book was released on 2002 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Maurice Olley, one of the great automotive design, research and development engineers of the 20th century, had a career that spanned two continents. Olley is perhaps best known for his systematic approach to ride and handling. His work was so comprehensive that many of the underlying concepts, test procedures, analysis, and evaluation techniques are still used in the auto industry today. Olley’s mathematical analyses cover design essentials in a physically understandable way. Thus they remain as useful today as when they were first developed. For example, they are easily programmed for study or routine use and for checking the results of more complex programs. Chassis Design – Principles and Analysis is based on Olley’s technical writings, and is the first complete presentation of his life’s work. This new book provides insight into the development of chassis technology and its practical application by a master. Many examples are worked out in the text and the analytical developments are underpinned by Olley’s years of design experience. COMPLETE CONTENTS Maurice Olley – his life and times Tyres and steady–state cornering – slip angle effects (primary) Steady–state cornering– steer effects (secondary) Transient cornering Ride Oscillations of the unsprung Suspension linkages Roll, roll moments, and skew rates Fore–and–aft forces Leaf springs – combined suspension spring and linkage Appendices Comprehensive and well–illustrated with over 400 figures and tables, as well as numerous appendices.
Download or read book Multi Body Dynamics written by Homer Rahnejat and published by Wiley. This book was released on 2000-07-26 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Leading developments in analysis and testing Multi-Body Dynamics: Monitoring and Simulation Techniques II provides a comprehensive update on the latest developments in the field. Presented at the 2nd International Symposium of Multi-Body Dynamics, this book details the newest work surrounding monitoring and simulation from leading researchers in industry and academia. Applicable to a wide variety of applications, the ideas and techniques presented here provide useful insight for anyone working in dynamics analysis and experimentation.
Download or read book Innovative Design and Development Practices in Aerospace and Automotive Engineering written by Ram P. Bajpai and published by Springer. This book was released on 2016-09-17 with total page 587 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents the best articles presented by researchers, academicians and industrial experts in the International Conference on “Innovative Design and Development Practices in Aerospace and Automotive Engineering (I-DAD 2016)”. The book discusses new concept designs, analysis and manufacturing technologies, where more swing is for improved performance through specific and/or multifunctional linguistic design aspects to downsize the system, improve weight to strength ratio, fuel efficiency, better operational capability at room and elevated temperatures, reduced wear and tear, NVH aspects while balancing the challenges of beyond Euro IV/Barat Stage IV emission norms, Greenhouse effects and recyclable materials. The innovative methods discussed in the book will serve as a reference material for educational and research organizations, as well as industry, to take up challenging projects of mutual interest.
Download or read book e Design written by Kuang-Hua Chang and published by Academic Press. This book was released on 2016-02-23 with total page 1228 pages. Available in PDF, EPUB and Kindle. Book excerpt: e-Design: Computer-Aided Engineering Design, Revised First Edition is the first book to integrate a discussion of computer design tools throughout the design process. Through the use of this book, the reader will understand basic design principles and all-digital design paradigms, the CAD/CAE/CAM tools available for various design related tasks, how to put an integrated system together to conduct All-Digital Design (ADD), industrial practices in employing ADD, and tools for product development. - Comprehensive coverage of essential elements for understanding and practicing the e-Design paradigm in support of product design, including design method and process, and computer based tools and technology - Part I: Product Design Modeling discusses virtual mockup of the product created in the CAD environment, including not only solid modeling and assembly theories, but also the critical design parameterization that converts the product solid model into parametric representation, enabling the search for better design alternatives - Part II: Product Performance Evaluation focuses on applying CAE technologies and software tools to support evaluation of product performance, including structural analysis, fatigue and fracture, rigid body kinematics and dynamics, and failure probability prediction and reliability analysis - Part III: Product Manufacturing and Cost Estimating introduces CAM technology to support manufacturing simulations and process planning, sheet forming simulation, RP technology and computer numerical control (CNC) machining for fast product prototyping, as well as manufacturing cost estimate that can be incorporated into product cost calculations - Part IV: Design Theory and Methods discusses modern decision-making theory and the application of the theory to engineering design, introduces the mainstream design optimization methods for both single and multi-objectives problems through both batch and interactive design modes, and provides a brief discussion on sensitivity analysis, which is essential for designs using gradient-based approaches - Tutorial lessons and case studies are offered for readers to gain hands-on experiences in practicing e-Design paradigm using two suites of engineering software: Pro/ENGINEER-based, including Pro/MECHANICA Structure, Pro/ENGINEER Mechanism Design, and Pro/MFG; and SolidWorks-based, including SolidWorks Simulation, SolidWorks Motion, and CAMWorks. Available on the companion website http://booksite.elsevier.com/9780123820389
Download or read book The Finite Element Method and Applications in Engineering Using ANSYS written by Erdogan Madenci and published by Springer. This book was released on 2015-02-10 with total page 664 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook offers theoretical and practical knowledge of the finite element method. The book equips readers with the skills required to analyze engineering problems using ANSYS®, a commercially available FEA program. Revised and updated, this new edition presents the most current ANSYS® commands and ANSYS® screen shots, as well as modeling steps for each example problem. This self-contained, introductory text minimizes the need for additional reference material by covering both the fundamental topics in finite element methods and advanced topics concerning modeling and analysis. It focuses on the use of ANSYS® through both the Graphics User Interface (GUI) and the ANSYS® Parametric Design Language (APDL). Extensive examples from a range of engineering disciplines are presented in a straightforward, step-by-step fashion. Key topics include: • An introduction to FEM • Fundamentals and analysis capabilities of ANSYS® • Fundamentals of discretization and approximation functions • Modeling techniques and mesh generation in ANSYS® • Weighted residuals and minimum potential energy • Development of macro files • Linear structural analysis • Heat transfer and moisture diffusion • Nonlinear structural problems • Advanced subjects such as submodeling, substructuring, interaction with external files, and modification of ANSYS®-GUI Electronic supplementary material for using ANSYS® can be found at http://link.springer.com/book/10.1007/978-1-4899-7550-8. This convenient online feature, which includes color figures, screen shots and input files for sample problems, allows for regeneration on the reader’s own computer. Students, researchers, and practitioners alike will find this an essential guide to predicting and simulating the physical behavior of complex engineering systems."
Download or read book Proceedings of International Conference on Intelligent Manufacturing and Automation written by Hari Vasudevan and published by Springer. This book was released on 2018-11-04 with total page 697 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the outcomes of the International Conference on Intelligent Manufacturing and Automation (ICIMA 2018) organized by the Departments of Mechanical Engineering and Production Engineering at Dwarkadas J. Sanghvi College of Engineering, Mumbai, and the Indian Society of Manufacturing Engineers. It includes original research and the latest advances in the field, focusing on automation, mechatronics and robotics; CAD/CAM/CAE/CIM/FMS in manufacturing; product design and development; DFM/DFA/FMEA; MEMS and Nanotechnology; rapid prototyping; computational techniques; industrial engineering; manufacturing process management; modelling and optimization techniques; CRM, MRP and ERP; green, lean, agile and sustainable manufacturing; logistics and supply chain management; quality assurance and environment protection; advanced material processing and characterization; and composite and smart materials.
Download or read book Fundamentals of Vehicle Dynamics written by Thomas Gillespie and published by SAE International. This book was released on 2021-04-29 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: A world-recognized expert in the science of vehicle dynamics, Dr. Thomas Gillespie has created an ideal reference book that has been used by engineers for 30 years, ranging from an introduction to the subject at the university level to a common sight on the desks of engineers throughout the world. As with the original printing, Fundamentals of Vehicle Dynamics, Revised Edition, strives to find a middle ground by balancing the need to provide detailed conceptual explanations of the engineering principles involved in the dynamics of ground vehicles with equations and example problems that clearly and concisely demonstrate how to apply such principles. A study of this book will ensure that the reader comes away with a solid foundation and is prepared to discuss the subject in detail. Ideal as much for a first course in vehicle dynamics as it is a professional reference, Fundamentals of Vehicle Dynamics, Revised Edition, maintains the tradition of the original by being easy to read and while receiving updates throughout in the form of modernized graphics and improved readability. Inasmuch as the first edition proved to be so popular, the Revised Edition intends to carry on that tradition for a new generation of engineers.
