Download or read book Advances in Physical Agents II written by Luis M. Bergasa and published by Springer Nature. This book was released on 2020-11-02 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book reports on cutting-edge Artificial Intelligence (AI) theories and methods aimed at the control and coordination of agents acting and moving in a dynamic environment. It covers a wide range of topics relating to: autonomous navigation, localization and mapping; mobile and social robots; multiagent systems; human-robot interaction; perception systems; and deep-learning techniques applied to the robotics. Based on the 21st edition of the International Workshop of Physical Agents (WAF 2020), held virtually on November 19-20, 2020, from Alcalá de Henares, Madrid, Spain, this book offers a snapshot of the state-of-the-art in the field of physical agents, with a special emphasis on novel AI techniques in perception, navigation and human robot interaction for autonomous systems.

Download or read book A Mathematical Introduction to Robotic Manipulation written by Richard M. Murray and published by CRC Press. This book was released on 2017-12-14 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Mathematical Introduction to Robotic Manipulation presents a mathematical formulation of the kinematics, dynamics, and control of robot manipulators. It uses an elegant set of mathematical tools that emphasizes the geometry of robot motion and allows a large class of robotic manipulation problems to be analyzed within a unified framework. The foundation of the book is a derivation of robot kinematics using the product of the exponentials formula. The authors explore the kinematics of open-chain manipulators and multifingered robot hands, present an analysis of the dynamics and control of robot systems, discuss the specification and control of internal forces and internal motions, and address the implications of the nonholonomic nature of rolling contact are addressed, as well. The wealth of information, numerous examples, and exercises make A Mathematical Introduction to Robotic Manipulation valuable as both a reference for robotics researchers and a text for students in advanced robotics courses.

Download or read book Simulation Modeling and Programming for Autonomous Robots written by Davide Brugali and published by Springer. This book was released on 2014-09-19 with total page 606 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 4th International Conference on Simulation, Modeling, and Programming for Autonomous Robots, SIMPAR 2014, held in Bergamo, Italy, in October 2014. The 49 revised full papers presented were carefully reviewed and selected from 62 submissions. The papers are organized in topical sections on simulation, modeling, programming, architectures, methods and tools, and systems and applications.

Download or read book Programming Robots with ROS written by Morgan Quigley and published by "O'Reilly Media, Inc.". This book was released on 2015-11-16 with total page 447 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chapter 3. Topics; Publishing to a Topic; Checking That Everything Works as Expected; Subscribing to a Topic; Checking That Everything Works as Expected; Latched Topics; Defining Your Own Message Types; Defining a New Message; Using Your New Message; When Should You Make a New Message Type?; Mixing Publishers and Subscribers; Summary; Chapter 4. Services; Defining a Service; Implementing a Service; Checking That Everything Works as Expected; Other Ways of Returning Values from a Service; Using a Service; Checking That Everything Works as Expected; Other Ways to Call Services; Summary.

Download or read book Rigid Body Dynamics Algorithms written by Roy Featherstone and published by Springer. This book was released on 2014-11-10 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rigid Body Dynamics Algorithms presents the subject of computational rigid-body dynamics through the medium of spatial 6D vector notation. It explains how to model a rigid-body system and how to analyze it, and it presents the most comprehensive collection of the best rigid-body dynamics algorithms to be found in a single source. The use of spatial vector notation greatly reduces the volume of algebra which allows systems to be described using fewer equations and fewer quantities. It also allows problems to be solved in fewer steps, and solutions to be expressed more succinctly. In addition algorithms are explained simply and clearly, and are expressed in a compact form. The use of spatial vector notation facilitates the implementation of dynamics algorithms on a computer: shorter, simpler code that is easier to write, understand and debug, with no loss of efficiency.

Download or read book Vehicle Dynamics written by Reza N. Jazar and published by Springer Science & Business Media. This book was released on 2013-11-19 with total page 1074 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook is appropriate for senior undergraduate and first year graduate students in mechanical and automotive engineering. The contents in this book are presented at a theoretical-practical level. It explains vehicle dynamics concepts in detail, concentrating on their practical use. Related theorems and formal proofs are provided, as are real-life applications. Students, researchers and practicing engineers alike will appreciate the user-friendly presentation of a wealth of topics, most notably steering, handling, ride, and related components. This book also: Illustrates all key concepts with examples Includes exercises for each chapter Covers front, rear, and four wheel steering systems, as well as the advantages and disadvantages of different steering schemes Includes an emphasis on design throughout the text, which provides a practical, hands-on approach

Download or read book Kinematic and Dynamic Simulation of Multibody Systems written by Javier Garcia de Jalon and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanical engineering, an engineering discipline born of the needs of the industrial revolution, is once again asked to do its substantial share in the call for industrial renewal. The general call is urgent as we face profound issues of productivity and competitiveness that require engineering solu tions, among others. The Mechanical Engineering Series features graduate texts and research monographs intended to address the need for informa tion in contemporary areas of mechanical engineering. The series is conceived as a comprehensive one that will cover a broad range of concentrations important to mechanical engineering graduate edu cation and research. We are fortunate to have a distinguished roster of consulting editors, each an expert in one of the areas of concentration. The names of the consulting editors are listed on the front page of the volume. The areas of concentration are applied mechanics, biomechanics, computa tional mechanics, dynamic systems and control, energetics, mechanics of material, processing, thermal science, and tribology. Professor Leckie, the consulting editor for applied mechanics, and I are pleased to present this volume of the series: Kinematic and Dynamic Simulation of Multibody Systems: The Real-Time Challenge by Professors Garcia de Jal6n and Bayo. The selection of this volume underscores again the interest of the Mechanical Engineering Series to provide our readers with topical monographs as well as graduate texts. Austin Texas Frederick F. Ling v The first author dedicates this book to the memory of Prof F. Tegerizo (t 1988), who introduced him to kinematics.

Download or read book Learning ROS for Robotics Programming written by Enrique Fernández and published by Packt Publishing Ltd. This book was released on 2015-08-18 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: Your one-stop guide to the Robot Operating System About This Book Model your robot on a virtual world and learn how to simulate it Create, visualize, and process Point Cloud information Easy-to-follow, practical tutorials to program your own robots Who This Book Is For If you are a robotic enthusiast who wants to learn how to build and program your own robots in an easy-to-develop, maintainable, and shareable way, this book is for you. In order to make the most of the book, you should have a C++ programming background, knowledge of GNU/Linux systems, and general skill in computer science. No previous background on ROS is required, as this book takes you from the ground up. It is also advisable to have some knowledge of version control systems, such as svn or git, which are often used by the community to share code. What You Will Learn Install a complete ROS Hydro system Create ROS packages and metapackages, using and debugging them in real time Build, handle, and debug ROS nodes Design your 3D robot model and simulate it in a virtual environment within Gazebo Give your robots the power of sight using cameras and calibrate and perform computer vision tasks with them Generate and adapt the navigation stack to work with your robot Integrate different sensors like Range Laser, Arduino, and Kinect with your robot Visualize and process Point Cloud information from different sensors Control and plan motion of robotic arms with multiple joints using MoveIt! In Detail If you have ever tried building a robot, then you know how cumbersome programming everything from scratch can be. This is where ROS comes into the picture. It is a collection of tools, libraries, and conventions that simplifies the robot building process. What's more, ROS encourages collaborative robotics software development, allowing you to connect with experts in various fields to collaborate and build upon each other's work. Packed full of examples, this book will help you understand the ROS framework to help you build your own robot applications in a simulated environment and share your knowledge with the large community supporting ROS. Starting at an introductory level, this book is a comprehensive guide to the fascinating world of robotics, covering sensor integration, modeling, simulation, computer vision, navigation algorithms, and more. You will then go on to explore concepts like topics, messages, and nodes. Next, you will learn how to make your robot see with HD cameras, or navigate obstacles with range sensors. Furthermore, thanks to the contributions of the vast ROS community, your robot will be able to navigate autonomously, and even recognize and interact with you in a matter of minutes. What's new in this updated edition? First and foremost, we are going to work with ROS Hydro this time around. You will learn how to create, visualize, and process Point Cloud information from different sensors. This edition will also show you how to control and plan motion of robotic arms with multiple joints using MoveIt! By the end of this book, you will have all the background you need to build your own robot and get started with ROS. Style and approach This book is an easy-to-follow guide that will help you find your way through the ROS framework. This book is packed with hands-on examples that will help you program your robot and give you complete solutions using ROS open source libraries and tools.

Download or read book To Life written by Linda Weintraub and published by Univ of California Press. This book was released on 2012-09-01 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: This title documents the burgeoning eco art movement from A to Z, presenting a panorama of artistic responses to environmental concerns, from Ant Farms anti-consumer antics in the 1970s to Marina Zurkows 2007 animation that anticipates the havoc wreaked upon the planet by global warming.

Download or read book Robot Analysis and Control written by H. Asada and published by John Wiley & Sons. This book was released on 1991-01-16 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduces the basic concepts of robot manipulation--the fundamental kinematic and dynamic analysis of manipulator arms, and the key techniques for trajectory control and compliant motion control. Material is supported with abundant examples adapted from successful industrial practice or advanced research topics. Includes carefully devised conceptual diagrams, discussion of current research topics with references to the latest publications, and end-of-book problem sets. Appendixes. Bibliography.

Download or read book Software Engineering for Robotics written by Ana Cavalcanti and published by Springer Nature. This book was released on 2021-07-05 with total page 483 pages. Available in PDF, EPUB and Kindle. Book excerpt: The topics covered in this book range from modeling and programming languages and environments, via approaches for design and verification, to issues of ethics and regulation. In terms of techniques, there are results on model-based engineering, product lines, mission specification, component-based development, simulation, testing, and proof. Applications range from manufacturing to service robots, to autonomous vehicles, and even robots than evolve in the real world. A final chapter summarizes issues on ethics and regulation based on discussions from a panel of experts. The origin of this book is a two-day event, entitled RoboSoft, that took place in November 2019, in London. Organized with the generous support of the Royal Academy of Engineering and the University of York, UK, RoboSoft brought together more than 100 scientists, engineers and practitioners from all over the world, representing 70 international institutions. The intended readership includes researchers and practitioners with all levels of experience interested in working in the area of robotics, and software engineering more generally. The chapters are all self-contained, include explanations of the core concepts, and finish with a discussion of directions for further work. Chapters 'Towards Autonomous Robot Evolution', 'Composition, Separation of Roles and Model-Driven Approaches as Enabler of a Robotics Software Ecosystem' and 'Verifiable Autonomy and Responsible Robotics' are available open access under a Creative Commons Attribution 4.0 International License via link.springer.com.

Download or read book Search and Rescue Robotics written by Multiple Authors and published by BoD – Books on Demand. This book was released on 2017-08-23 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the event of large crises (earthquakes, typhoons, floods, ...), a primordial task of the fire and rescue services is the search for human survivors on the incident site. This is a complex and dangerous task, which - too often - leads to loss of lives among the human crisis managers themselves. This book explains how unmanned search can be added to the toolkit of the search and rescue workers, offering a valuable tool to save human lives and to speed up the search and rescue process. The introduction of robotic tools in the world of search and rescue is not straightforward, due to the fact that the search and rescue context is extremely technology-unfriendly, meaning that very robust solutions, which can be deployed extremely quickly, are required. Multiple research projects across the world are tackling this problem and in this book, a special focus is placed on showcasing the results of the European Union ICARUS project on this subject. The ICARUS project proposes to equip first responders with a comprehensive and integrated set of unmanned search and rescue tools, to increase the situational awareness of human crisis managers, so that more work can be done in a shorter amount of time. The ICARUS tools consist of assistive unmanned air, ground, and sea vehicles, equipped with victim-detection sensors. The unmanned vehicles collaborate as a coordinated team, communicating via ad hoc cognitive radio networking. To ensure optimal human-robot collaboration, these tools are seamlessly integrated into the command and control equipment of the human crisis managers and a set of training and support tools is provided to them in order to learn to use the ICARUS system. The research leading to these results has received funding from the European Community's Seventh Framework Programme (FP7/2007-2013) under grant agreement number 285417. The publishing of this book was funded by the EC FP7 Post-Grant Open Access Pilot programme.

Download or read book Robot Operating System ROS written by Anis Koubaa and published by Springer. This book was released on 2017-05-25 with total page 652 pages. Available in PDF, EPUB and Kindle. Book excerpt: This second volume is a continuation of the successful first volume of this Springer book, and as well as addressing broader topics it puts a particular focus on unmanned aerial vehicles (UAVs) with Robot Operating System (ROS). Consisting of three types of chapters: tutorials, cases studies, and research papers, it provides comprehensive additional material on ROS and the aspects of developing robotics systems, algorithms, frameworks, and applications with ROS. ROS is being increasingly integrated in almost all kinds of robots and is becoming the de-facto standard for developing applications and systems for robotics. Although the research community is actively developing applications with ROS and extending its features, amount of literature references is not representative of the huge amount of work being done. The book includes 19 chapters organized into six parts: Part 1 presents the control of UAVs with ROS, while in Part 2, three chapters deal with control of mobile robots. Part 3 provides recent work toward integrating ROS with Internet, cloud and distributed systems. Part 4 offers five case studies of service robots and field experiments. Part 5 presents signal-processing tools for perception and sensing, and lastly, Part 6 introduces advanced simulation frameworks. The diversity of topics in the book makes it a unique and valuable reference resource for ROS users, researchers, learners and developers.

Download or read book Airborne Wind Energy written by Roland Schmehl and published by Springer. This book was released on 2018-03-31 with total page 752 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides in-depth coverage of the latest research and development activities concerning innovative wind energy technologies intended to replace fossil fuels on an economical basis. A characteristic feature of the various conversion concepts discussed is the use of tethered flying devices to substantially reduce the material consumption per installed unit and to access wind energy at higher altitudes, where the wind is more consistent. The introductory chapter describes the emergence and economic dimension of airborne wind energy. Focusing on “Fundamentals, Modeling & Simulation”, Part I includes six contributions that describe quasi-steady as well as dynamic models and simulations of airborne wind energy systems or individual components. Shifting the spotlight to “Control, Optimization & Flight State Measurement”, Part II combines one chapter on measurement techniques with five chapters on control of kite and ground stations, and two chapters on optimization. Part III on “Concept Design & Analysis” includes three chapters that present and analyze novel harvesting concepts as well as two chapters on system component design. Part IV, which centers on “Implemented Concepts”, presents five chapters on established system concepts and one chapter about a subsystem for automatic launching and landing of kites. In closing, Part V focuses with four chapters on “Technology Deployment” related to market and financing strategies, as well as on regulation and the environment. The book builds on the success of the first volume “Airborne Wind Energy” (Springer, 2013), and offers a self-contained reference guide for researchers, scientists, professionals and students. The respective chapters were contributed by a broad variety of authors: academics, practicing engineers and inventors, all of whom are experts in their respective fields.

Download or read book Materials Design and Manufacturing for Sustainable Environment written by Santhakumar Mohan and published by Springer Nature. This book was released on 2021-02-06 with total page 909 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises the select proceedings of the International Conference on Materials, Design and Manufacturing for Sustainable Environment (ICMDMSE 2020). The primary focus is on emerging materials and cutting-edge manufacturing technologies for sustainable environment. The book covers a wide range of topics such as advanced materials, vibration, tribology, finite element method (FEM), heat transfer, fluid mechanics, energy engineering, additive manufacturing, robotics and automation, automobile engineering, industry 4.0, MEMS and nanotechnology, optimization techniques, condition monitoring, and new paradigms in technology management. Contents of this book will be useful to students, researchers, and practitioners alike.

Download or read book Robot Operating System ROS for Absolute Beginners written by Lentin Joseph and published by Apress. This book was released on 2018-05-24 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: Learn how to get started with robotics programming using Robot Operation System (ROS). Targeted for absolute beginners in ROS, Linux, and Python, this short guide shows you how to build your own robotics projects. ROS is an open-source and flexible framework for writing robotics software. With a hands-on approach and sample projects, Robot Operating System for Absolute Beginners will enable you to begin your first robot project. You will learn the basic concepts of working with ROS and begin coding with ROS APIs in both C++ and Python. What You’ll Learn Install ROS Review fundamental ROS concepts Work with frequently used commands in ROS Build a mobile robot from scratch using ROS Who This Book Is For Absolute beginners with little to no programming experience looking to learn robotics programming.

Download or read book Robot Operating System ROS written by Anis Koubaa and published by Springer Nature. This book was released on 2020-08-21 with total page 397 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the fifth volume in the successful book series Robot Operating System: The Complete Reference. The objective of the book is to provide the reader with comprehensive coverage on the Robot Operating System (ROS), which is currently considered to be the primary development framework for robotics applications, and the latest trends and contributing systems. The content is divided into six parts. Pat I presents for the first time the emerging ROS 2.0 framework, while Part II focuses on multi-robot systems, namely on SLAM and Swarm coordination. Part III provides two chapters on autonomous systems, namely self-driving cars and unmanned aerial systems. In turn, Part IV addresses the contributions of simulation frameworks for ROS. In Part V, two chapters explore robotic manipulators and legged robots. Finally, Part VI presents emerging topics in monocular SLAM and a chapter on fault tolerance systems for ROS. Given its scope, the book will offer a valuable companion for ROS users and developers, helping them deepen their knowledge of ROS capabilities and features.