Download or read book Assembly Line Design written by Brahim Rekiek and published by Springer Science & Business Media. This book was released on 2006-04-21 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt: Efficient assembly line design is a problem of considerable industrial importance. Assembly Line Design will be bought by technical personnel working in design, planning and production departments in industry as well as managers in industry who want to learn more about concurrent engineering. This book will also be purchased by researchers and postgraduate students in mechanical, manufacturing or micro-engineering.

Download or read book Accessibility Assistive Technology and Digital Environments written by Matteo Zallio and published by AHFE Conference. This book was released on 2024-07-24 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the 15th International Conference on Applied Human Factors and Ergonomics and the Affiliated Conferences, Nice, France, 24-27 July 2024.

Download or read book Advances in Production Management Systems Artificial Intelligence for Sustainable and Resilient Production Systems written by Alexandre Dolgui and published by Springer Nature. This book was released on 2021-08-31 with total page 779 pages. Available in PDF, EPUB and Kindle. Book excerpt: The five-volume set IFIP AICT 630, 631, 632, 633, and 634 constitutes the refereed proceedings of the International IFIP WG 5.7 Conference on Advances in Production Management Systems, APMS 2021, held in Nantes, France, in September 2021.* The 378 papers presented were carefully reviewed and selected from 529 submissions. They discuss artificial intelligence techniques, decision aid and new and renewed paradigms for sustainable and resilient production systems at four-wall factory and value chain levels. The papers are organized in the following topical sections: Part I: artificial intelligence based optimization techniques for demand-driven manufacturing; hybrid approaches for production planning and scheduling; intelligent systems for manufacturing planning and control in the industry 4.0; learning and robust decision support systems for agile manufacturing environments; low-code and model-driven engineering for production system; meta-heuristics and optimization techniques for energy-oriented manufacturing systems; metaheuristics for production systems; modern analytics and new AI-based smart techniques for replenishment and production planning under uncertainty; system identification for manufacturing control applications; and the future of lean thinking and practice Part II: digital transformation of SME manufacturers: the crucial role of standard; digital transformations towards supply chain resiliency; engineering of smart-product-service-systems of the future; lean and Six Sigma in services healthcare; new trends and challenges in reconfigurable, flexible or agile production system; production management in food supply chains; and sustainability in production planning and lot-sizing Part III: autonomous robots in delivery logistics; digital transformation approaches in production management; finance-driven supply chain; gastronomic service system design; modern scheduling and applications in industry 4.0; recent advances in sustainable manufacturing; regular session: green production and circularity concepts; regular session: improvement models and methods for green and innovative systems; regular session: supply chain and routing management; regular session: robotics and human aspects; regular session: classification and data management methods; smart supply chain and production in society 5.0 era; and supply chain risk management under coronavirus Part IV: AI for resilience in global supply chain networks in the context of pandemic disruptions; blockchain in the operations and supply chain management; data-based services as key enablers for smart products, manufacturing and assembly; data-driven methods for supply chain optimization; digital twins based on systems engineering and semantic modeling; digital twins in companies first developments and future challenges; human-centered artificial intelligence in smart manufacturing for the operator 4.0; operations management in engineer-to-order manufacturing; product and asset life cycle management for smart and sustainable manufacturing systems; robotics technologies for control, smart manufacturing and logistics; serious games analytics: improving games and learning support; smart and sustainable production and supply chains; smart methods and techniques for sustainable supply chain management; the new digital lean manufacturing paradigm; and the role of emerging technologies in disaster relief operations: lessons from COVID-19 Part V: data-driven platforms and applications in production and logistics: digital twins and AI for sustainability; regular session: new approaches for routing problem solving; regular session: improvement of design and operation of manufacturing systems; regular session: crossdock and transportation issues; regular session: maintenance improvement and lifecycle management; regular session: additive manufacturing and mass customization; regular session: frameworks and conceptual modelling for systems and services efficiency; regular session: optimization of production and transportation systems; regular session: optimization of supply chain agility and reconfigurability; regular session: advanced modelling approaches; regular session: simulation and optimization of systems performances; regular session: AI-based approaches for quality and performance improvement of production systems; and regular session: risk and performance management of supply chains *The conference was held online.

Download or read book Proceedings of the 21st International Conference on Industrial Engineering and Engineering Management 2014 written by Ershi Qi and published by Springer. This book was released on 2015-01-06 with total page 628 pages. Available in PDF, EPUB and Kindle. Book excerpt: Being the premier forum for the presentation of new advances and research results in the fields of Industrial Engineering, IEEM 2014 aims to provide a high-level international forum for experts, scholars and entrepreneurs at home and abroad to present the recent advances, new techniques and applications face and face, to promote discussion and interaction among academics, researchers and professionals to promote the developments and applications of the related theories and technologies in universities and enterprises and to establish business or research relations to find global partners for future collaboration in the field of Industrial Engineering. All the goals of the international conference are to fulfill the mission of the series conference which is to review, exchange, summarize and promote the latest achievements in the field of industrial engineering and engineering management over the past year and to propose prospects and vision for the further development.

Download or read book Artificial Intelligence for Fashion Industry in the Big Data Era written by Sébastien Thomassey and published by Springer. This book was released on 2018-05-16 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an overview of current issues and challenges in the fashion industry and an update on data-driven artificial intelligence (AI) techniques and their potential implementation in response to those challenges. Each chapter starts off with an example of a data-driven AI technique on a particular sector of the fashion industry (design, manufacturing, supply or retailing), before moving on to illustrate its implementation in a real-world application

Download or read book Designing Great Data Products written by Jeremy Howard and published by "O'Reilly Media, Inc.". This book was released on 2012-03-23 with total page 25 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the past few years, we’ve seen many data products based on predictive modeling. These products range from weather forecasting to recommendation engines like Amazon's. Prediction technology can be interesting and mathematically elegant, but we need to take the next step: going from recommendations to products that can produce optimal strategies for meeting concrete business objectives. We already know how to build these products: they've been in use for the past decade or so, but they're not as common as they should be. This report shows how to take the next step: to go from simple predictions and recommendations to a new generation of data products with the potential to revolutionize entire industries.

Download or read book Handbook of Neural Computation written by Pijush Samui and published by Academic Press. This book was released on 2017-07-18 with total page 660 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Neural Computation explores neural computation applications, ranging from conventional fields of mechanical and civil engineering, to electronics, electrical engineering and computer science. This book covers the numerous applications of artificial and deep neural networks and their uses in learning machines, including image and speech recognition, natural language processing and risk analysis. Edited by renowned authorities in this field, this work is comprised of articles from reputable industry and academic scholars and experts from around the world. Each contributor presents a specific research issue with its recent and future trends. As the demand rises in the engineering and medical industries for neural networks and other machine learning methods to solve different types of operations, such as data prediction, classification of images, analysis of big data, and intelligent decision-making, this book provides readers with the latest, cutting-edge research in one comprehensive text. - Features high-quality research articles on multivariate adaptive regression splines, the minimax probability machine, and more - Discusses machine learning techniques, including classification, clustering, regression, web mining, information retrieval and natural language processing - Covers supervised, unsupervised, reinforced, ensemble, and nature-inspired learning methods

Download or read book Balancing and Sequencing of Assembly Lines written by Armin Scholl and published by Physica. This book was released on 1999-02-26 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book deals with two main decision problems which arise when flow-line production systems are installed and operated. The assembly line balancing problem consists of partitioning the work, necessary to assemble the product(s), among different stations of an assembly line. If several models of a product are jointly processed on a line, this medium-term problem is connected with the short-term problem of determining an operating sequence of the models. In Part I balancing and sequencing problems are discussed, classified, and arranged within a hierarchical planning system. In the present second edition special emphasis is given to u-shaped assembly lines which are important components of modern just-in-time production systems. Part II is concerned with exact and heuristic procedures for solving those decision problems. For each problem type considered, a survey of existing procedures is given and new efficient solution methods are developed. Comprehensive numerical investigations showing the effectiveness of the new methods and their superiority over existing approaches are reported.

Download or read book Automation and Control written by Elmer P. Dadios and published by BoD – Books on Demand. This book was released on 2022-05-25 with total page 142 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in automation and control today cover many areas of technology where human input is minimized. This book discusses numerous types and applications of automation and control. Chapters address topics such as building information modeling (BIM)–based automated code compliance checking (ACCC), control algorithms useful for military operations and video games, rescue competitions using unmanned aerial-ground robots, and stochastic control systems.

Download or read book Introduction to Operations Research ISE written by Frederick Hillier and published by . This book was released on 2024-04-02 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Discrete Choice Methods with Simulation written by Kenneth Train and published by Cambridge University Press. This book was released on 2009-07-06 with total page 399 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the new generation of discrete choice methods, focusing on the many advances that are made possible by simulation. Researchers use these statistical methods to examine the choices that consumers, households, firms, and other agents make. Each of the major models is covered: logit, generalized extreme value, or GEV (including nested and cross-nested logits), probit, and mixed logit, plus a variety of specifications that build on these basics. Simulation-assisted estimation procedures are investigated and compared, including maximum stimulated likelihood, method of simulated moments, and method of simulated scores. Procedures for drawing from densities are described, including variance reduction techniques such as anithetics and Halton draws. Recent advances in Bayesian procedures are explored, including the use of the Metropolis-Hastings algorithm and its variant Gibbs sampling. The second edition adds chapters on endogeneity and expectation-maximization (EM) algorithms. No other book incorporates all these fields, which have arisen in the past 25 years. The procedures are applicable in many fields, including energy, transportation, environmental studies, health, labor, and marketing.

Download or read book Applications of Optimization with Xpress MP written by Christelle Guéret and published by Twayne Publishers. This book was released on 2002 with total page 349 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Ant Colony Optimization written by Marco Dorigo and published by MIT Press. This book was released on 2004-06-04 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: An overview of the rapidly growing field of ant colony optimization that describes theoretical findings, the major algorithms, and current applications. The complex social behaviors of ants have been much studied by science, and computer scientists are now finding that these behavior patterns can provide models for solving difficult combinatorial optimization problems. The attempt to develop algorithms inspired by one aspect of ant behavior, the ability to find what computer scientists would call shortest paths, has become the field of ant colony optimization (ACO), the most successful and widely recognized algorithmic technique based on ant behavior. This book presents an overview of this rapidly growing field, from its theoretical inception to practical applications, including descriptions of many available ACO algorithms and their uses. The book first describes the translation of observed ant behavior into working optimization algorithms. The ant colony metaheuristic is then introduced and viewed in the general context of combinatorial optimization. This is followed by a detailed description and guide to all major ACO algorithms and a report on current theoretical findings. The book surveys ACO applications now in use, including routing, assignment, scheduling, subset, machine learning, and bioinformatics problems. AntNet, an ACO algorithm designed for the network routing problem, is described in detail. The authors conclude by summarizing the progress in the field and outlining future research directions. Each chapter ends with bibliographic material, bullet points setting out important ideas covered in the chapter, and exercises. Ant Colony Optimization will be of interest to academic and industry researchers, graduate students, and practitioners who wish to learn how to implement ACO algorithms.

Download or read book Journal of Applied Operational Research written by Kaveh Sheibani and published by ORLAB Analytics. This book was released on 2011-04-30 with total page 60 pages. Available in PDF, EPUB and Kindle. Book excerpt: We are pleased to welcome readers to this issue of the Journal of Applied Operational Research (JAOR), Volume 3, Number 1. The journal reports on developments in all aspects of operational research, including the latest advances and applications. It is a primarily goal of the journal to focus on and publish practical case studies which illustrate real-life applications.

Download or read book Matheuristics written by Vittorio Maniezzo and published by Springer Science & Business Media. This book was released on 2009-09-18 with total page 283 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metaheuristics support managers in decision-making with robust tools that provide high-quality solutions to important applications in business, engineering, economics, and science in reasonable time frames, but finding exact solutions in these applications still poses a real challenge. However, because of advances in the fields of mathematical optimization and metaheuristics, major efforts have been made on their interface regarding efficient hybridization. This edited book will provide a survey of the state of the art in this field by providing some invited reviews by well-known specialists as well as refereed papers from the second Matheuristics workshop to be held in Bertinoro, Italy, June 2008. Papers will explore mathematical programming techniques in metaheuristics frameworks, and especially focus on the latest developments in Mixed Integer Programming in solving real-world problems.

Download or read book Multi Agent Based Production Planning and Control written by Jie Zhang and published by John Wiley & Sons. This book was released on 2017-08-28 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: At the crossroads of artificial intelligence, manufacturing engineering, operational research and industrial engineering and management, multi-agent based production planning and control is an intelligent and industrially crucial technology with increasing importance. This book provides a complete overview of multi-agent based methods for today’s competitive manufacturing environment, including the Job Shop Manufacturing and Re-entrant Manufacturing processes. In addition to the basic control and scheduling systems, the author also highlights advance research in numerical optimization methods and wireless sensor networks and their impact on intelligent production planning and control system operation. Enables students, researchers and engineers to understand the fundamentals and theories of multi-agent based production planning and control Written by an author with more than 20 years’ experience in studying and formulating a complete theoretical system in production planning technologies Fully illustrated throughout, the methods for production planning, scheduling and controlling are presented using experiments, numerical simulations and theoretical analysis Comprehensive and concise, Multi-Agent Based Production Planning and Control is aimed at the practicing engineer and graduate student in industrial engineering, operational research, and mechanical engineering. It is also a handy guide for advanced students in artificial intelligence and computer engineering.

Download or read book Engineering Design Optimization written by Joaquim R. R. A. Martins and published by Cambridge University Press. This book was released on 2021-11-18 with total page 653 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on course-tested material, this rigorous yet accessible graduate textbook covers both fundamental and advanced optimization theory and algorithms. It covers a wide range of numerical methods and topics, including both gradient-based and gradient-free algorithms, multidisciplinary design optimization, and uncertainty, with instruction on how to determine which algorithm should be used for a given application. It also provides an overview of models and how to prepare them for use with numerical optimization, including derivative computation. Over 400 high-quality visualizations and numerous examples facilitate understanding of the theory, and practical tips address common issues encountered in practical engineering design optimization and how to address them. Numerous end-of-chapter homework problems, progressing in difficulty, help put knowledge into practice. Accompanied online by a solutions manual for instructors and source code for problems, this is ideal for a one- or two-semester graduate course on optimization in aerospace, civil, mechanical, electrical, and chemical engineering departments.