Download or read book A Classification System to Describe Workpieces written by W. R. Macconnell and published by Elsevier. This book was released on 2016-01-22 with total page 213 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Classification System to Describe Workpieces provides information pertinent to the fundamental aspects and principles of coding. This book discusses the various applications of the classification system of coding. Organized into three chapters, this book begins with an overview of the requirements of a system of classification pertaining adequately and equally to design, production, and work planning. This text then examines the purpose of the classification system in production to determine the most suitable means of machining a component. Other chapters consider the optimal utilization of machines, which comes within the scope of production control. This book discusses as well the rotational components that are separated into segments after rotational machining are rotational components with deviations. The final chapter deals with rotational components with cast, forged, or welded stiffening or with recesses not affecting the function of the components. This book is a valuable resource for engineers involved in machine tool industries.
Download or read book A Classification System to Describe Workpieces written by and published by . This book was released on 1970 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Classification System to Describe Workpieces written by C. Opitz and published by . This book was released on 1970 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Classification System to Describe Workpieces written by and published by . This book was released on 1970 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Classification System to Describe Workpieces Classification System written by Helmut Opitz and published by Pergamon. This book was released on 1970-01 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Classification System to Describe Workpieces Part 1 written by and published by . This book was released on 1970 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Classification System to describe workpieces written by Herwart Opitz and published by . This book was released on 1970 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Classification System to describe workpieces written by Herwart Opitz and published by . This book was released on 1970 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Computer Aided and Integrated Manufacturing Systems written by Cornelius T. Leondes and published by World Scientific. This book was released on 2003 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first part of a five-volume reference on the very broad and highly significant subject of computer-aided and integrated manufacturing systems. The techniques and technologies used in computer-aided and integrated manufacturing systems have produced, and will no doubt continue to produce, major annual improvements in productivity, which is defined as the goods and services produced from each hour of work. This publication deals particularly with more effective utilization of labour and capital, especially information technology systems. Together the five volumes treat comprehensively the major techniques and technologies that are involved. This volume focuses on computer techniques.
Download or read book Computer Aided and Integrated Manufacturing Systems Computer techniques written by Cornelius T. Leondes and published by World Scientific. This book was released on 2003 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is an invaluable five-volume reference on the very broad and highly significant subject of computer aided and integrated manufacturing systems. It is a set of distinctly titled and well-harmonized volumes by leading experts on the international scene.The techniques and technologies used in computer aided and integrated manufacturing systems have produced, and will no doubt continue to produce, major annual improvements in productivity, which is defined as the goods and services produced from each hour of work. This publication deals particularly with more effective utilization of labor and capital, especially information technology systems. Together the five volumes treat comprehensively the major techniques and technologies that are involved.
Download or read book Advances in Case Based Reasoning written by Jean-Paul Haton and published by Springer Science & Business Media. This book was released on 1995-10-11 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: The type of material considered for publication includes drafts of original papers or monographs, technical reports of high quality and broad interest, advanced-level lectures, reports of meetings, provided they are of exceptional interest and focused on a single topic.
Download or read book Group Technology written by E.A. Arn and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 171 pages. Available in PDF, EPUB and Kindle. Book excerpt: Group Technology (GT) as a manufacturing concept has gained steady interest within the machine building industry all over the world. Originally it was used more or less only in the so-called parts family manufacturing concept. With growing opportunities for using the computer in the design process, operating planning and layout planning, the potential advantages became more and more obvious. In order to implement GT successfully and with a view to improving the overall economic situation of a production company, it is necessary to consider all aspects of the com plete manufacturing system. Experience has shown, that in the first stage a general basis has to be formed. This is done by a clear and practical definition of three GT manufacturing systems, the devel opment of a set of classification systems for work pieces, working operations and man ufacturing equipment, and in building a data bank from which a data basis for the GT planning process can be evaluated. A second stage of implementation then considers the particular aspects of GT. These are, firstly, a concept for layout and investment planning based on a representative parts spectrum; secondly, for application of the GT-idea in the design process three similar types of parts are to be developed as a logical supplement to the standard and recurring parts practice; thirdly, a three stage process planning and work measurement system can be developed for the so defined spectrum of similar parts.
Download or read book Computer Aided And Integrated Manufacturing Systems A 5 volume Set Volume 1 Computer Techniques written by Cornelius T Leondes and published by World Scientific. This book was released on 2003-08-05 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is an invaluable five-volume reference on the very broad and highly significant subject of computer aided and integrated manufacturing systems. It is a set of distinctly titled and well-harmonized volumes by leading experts on the international scene.The techniques and technologies used in computer aided and integrated manufacturing systems have produced, and will no doubt continue to produce, major annual improvements in productivity, which is defined as the goods and services produced from each hour of work. This publication deals particularly with more effective utilization of labor and capital, especially information technology systems. Together the five volumes treat comprehensively the major techniques and technologies that are involved.
Download or read book Advances in Ergonomics of Manufacturing Managing the Enterprise of the Future written by Stefan Trzcielinski and published by Springer. This book was released on 2017-06-13 with total page 455 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the latest advances in people-centered design, operation, and management of broadly defined advanced manufacturing systems and processes. It reports on human factors issues related to various research areas such as intelligent manufacturing technologies, web-based manufacturing services, digital manufacturing worlds, and manufacturing knowledge support systems, as well as other contemporary manufacturing environments. The book covers an extensive range of applications of human factors in the manufacturing industry: from work design, supply chains, evaluation of work systems, and social and organization design, to manufacturing systems, simulation and visualization, automation in manufacturing, and many others. Special emphasis is given to computer aided manufacturing technologies supporting enterprises, both in general and in the manufacturing industry in particular, such as knowledge-based systems, virtual reality, artificial intelligence methods, and many more. Based on the AHFE 2017 International Conference on Human Aspects of Advanced Manufacturing, held on July 17-21, 2017, in Los Angeles, California, USA, the book provides readers with a timely snapshot of the enterprises of the future and a set of cutting-edge technologies and methods for building innovative, human-centered, and computer-integrated manufacturing systems.
Download or read book Handbook of Manufacturing Systems and Design written by Uzair Khaleeq uz Zaman and published by CRC Press. This book was released on 2023-08-24 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive overview of manufacturing systems, their role in product/process design, and their interconnection with an Industry 4.0 perspective, especially related to design, manufacturing, and operations. Handbook of Manufacturing Systems and Design: An Industry 4.0 Perspective provides the knowledge related to the theories and concepts of Industry 4.0. It focuses on the different types of manufacturing systems in Industry 4.0 along with associated design, and control strategies. It concentrates on the operations in Industry 4.0 with a particular focus on supply chain, logistics, risk management, and reverse engineering perspectives. Offering basic concepts and applications through to advanced topics, the handbook feeds into the goal of being a source of knowledge as well as a vehicle to explore the future possibilities of design, techniques, methods, and operations associated with Industry 4.0. Concepts with practical applications in the form of case studies are added to each chapter to round out the many attributes this handbook offers. This handbook targets students, engineers, managers, designers, and manufacturers, and will assist in their understanding of the core concepts of manufacturing systems in connection with Industry 4.0 and optimize alignment between supply and demand in real time for effective implementation of the design concepts.
Download or read book Concurrent Design of Products Manufacturing Processes and Systems written by Ben Wang and published by CRC Press. This book was released on 1999-01-27 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: Methods presented involve the use of simulation and modeling tools and virtual workstations in conjunction with a design environment. This allows a diverse group of researchers, manufacturers, and suppliers to work within a comprehensive network of shared knowledge. The design environment consists of engineering workstations and servers and a suite of simulation, quantitative, computational, analytical, qualitative and experimental tools. Such a design environment will allow the effective and efficient integration of complete product design, manufacturing process design, and customer satisfaction predictions. This volume enables the reader to create an integrated concurrent engineering design and analysis infrastructure through the use of virtual workstations and servers; provide remote, instant sharing of engineering data and resources for the development of a product, system, mechanism, part, business and/or process, and develop applications fully compatible with international CAD/CAM/CAE standards for product representation and modeling.
Download or read book Handbook of Industrial Engineering written by Gavriel Salvendy and published by John Wiley & Sons. This book was released on 2001-05-25 with total page 2846 pages. Available in PDF, EPUB and Kindle. Book excerpt: Unrivaled coverage of a broad spectrum of industrial engineering concepts and applications The Handbook of Industrial Engineering, Third Edition contains a vast array of timely and useful methodologies for achieving increased productivity, quality, and competitiveness and improving the quality of working life in manufacturing and service industries. This astoundingly comprehensive resource also provides a cohesive structure to the discipline of industrial engineering with four major classifications: technology; performance improvement management; management, planning, and design control; and decision-making methods. Completely updated and expanded to reflect nearly a decade of important developments in the field, this Third Edition features a wealth of new information on project management, supply-chain management and logistics, and systems related to service industries. Other important features of this essential reference include: * More than 1,000 helpful tables, graphs, figures, and formulas * Step-by-step descriptions of hundreds of problem-solving methodologies * Hundreds of clear, easy-to-follow application examples * Contributions from 176 accomplished international professionals with diverse training and affiliations * More than 4,000 citations for further reading The Handbook of Industrial Engineering, Third Edition is an immensely useful one-stop resource for industrial engineers and technical support personnel in corporations of any size; continuous process and discrete part manufacturing industries; and all types of service industries, from healthcare to hospitality, from retailing to finance. Of related interest . . . HANDBOOK OF HUMAN FACTORS AND ERGONOMICS, Second Edition Edited by Gavriel Salvendy (0-471-11690-4) 2,165 pages 60 chapters "A comprehensive guide that contains practical knowledge and technical background on virtually all aspects of physical, cognitive, and social ergonomics. As such, it can be a valuable source of information for any individual or organization committed to providing competitive, high-quality products and safe, productive work environments."-John F. Smith Jr., Chairman of the Board, Chief Executive Officer and President, General Motors Corporation (From the Foreword)
